π-electron injection activated dormant ligands in graphitic carbon nitride for efficient and stable uranium extraction.

Graphitic carbon nitride (CN) as an adsorbent exhibit promising potential for the removal of uranium in water. However, the lack of active sites seriously restricts its practical application. In contrast to the traditional method of introducing new ligands, we propose a strategy to activate original ligands on CN by injecting π electrons, which can be realized by grafting 4-phenoxyphenol (PP) on CN (PCN). Compared with CN, the maximum adsorption capacity of PCN for uranium increased from 150.9 mg/g to 380.6 mg/g. Furthermore, PCN maintains good adsorption properties over a wide range of uranium concentrations (1 ∼ 60 mg/L) and pH (4 ∼ 8). After 5 consecutive cycles, PCN exhibited sustained uranium removal performance with a little of losses. The experimental and theoretical results show that the enhancement of adsorption performance is mainly due to the ligands activation of CN by delocalization of π electrons from PP. Furthermore, this activation can be enhanced by irradiation, as the CN can be photoexcited to provide additional photoelectrons for PP. As a result, dormant ligands such as N-CN, C-O-C, C-N-H and N-(C)3 can be activated to participate in coordination with uranium. This work provides theoretical guidance for the design and preparation of high efficiency uranium adsorbent.

Thermodynamic and Kinetic Behaviors of Electrolytes Mediated by Intermolecular Interactions Enabling High-Performance Lithium-Ion Batteries.

Electrolyte solvation chemistry regulated by lithium salts, solvents, and additives has garnered significant attention since it is the most effective strategy for designing high-performance electrolytes in lithium-ion batteries (LIBs). However, achieving a delicate balance is a persistent challenge, given that excessively strong or weak Li+-solvent coordination markedly undermines electrolyte properties, including thermodynamic redox stability and Li+-desolvation kinetics, limiting the practical applications. Herein, we elucidate the crucial influence of solvent-solvent interactions in modulating the Li+-solvation structure to enhance electrolyte thermodynamic and kinetic properties. As a paradigm, by combining strongly coordinated propylene carbonate (PC) with weakly coordinated cyclopentylmethyl ether (CPME), we identified intermolecular interactions between PC and CPME using 1H-1H correlation spectroscopy. Experimental and computational findings underscore the crucial role of solvent-solvent interactions in regulating Li+-solvent/anion interactions, which can enhance both the thermodynamic (i.e., antireduction capability) and kinetic (i.e., Li+-desolvation process) aspects of electrolytes. Additionally, we introduced an interfacial model to reveal the intricate relationship between solvent-solvent interactions, electrolyte properties, and electrode interfacial behaviors at a molecular scale. This study provides valuable insights into the critical impact of solvent-solvent interactions on electrolyte properties, which are pivotal for guiding future efforts in functionalized electrolyte engineering for metal-ion batteries.

Evaluation of vaccine candidates against Rhodococcus equi in BALB/c mice infection model: cellular and humoral immune responses.

Rhodococcus equi (R. equi) is a zoonotic opportunistic pathogen that mainly causes fatal lung and extrapulmonary abscesses in foals and immunocompromised individuals. To date, no commercial vaccine against R. equi exists. We previously screened all potential vaccine candidates from the complete genome of R. equi using a reverse vaccinology approach. Five of these candidates, namely ABC transporter substrate-binding protein (ABC transporter), penicillin-binding protein 2 (PBD2), NlpC/P60 family protein (NlpC/P60), esterase family protein (Esterase), and M23 family metallopeptidase (M23) were selected for the evaluation of immunogenicity and immunoprotective effects in BALB/c mice model challenged with R. equi. The results showed that all five vaccine candidate-immunized mice experienced a significant increase in spleen antigen-specific IFN-γ- and TNF-α-positive CD4 + and CD8 + T lymphocytes and generated robust Th1- and Th2-type immune responses and antibody responses. Two weeks after the R. equi challenge, immunization with the five vaccine candidates reduced the bacterial load in the lungs and improved the pathological damage to the lungs and livers compared with those in the control group. NlpC/P60, Esterase, and M23 were more effective than the ABC transporter and PBD2 in inducing protective immunity against R. equi challenge in mice. In addition, these vaccine candidates have the potential to induce T lymphocyte memory immune responses in mice. In summary, these antigens are effective candidates for the development of protective vaccines against R. equi. The R. equi antigen library has been expanded and provides new ideas for the development of multivalent vaccines.

Molecular Landscape and Prognostic Value in the Post-Translational Ubiquitination, SUMOylation and Neddylation in Osteosarcoma: A Transcriptome Study.

Background: Post-translational modifications (PTM) significantly influence the pathogenesis and progression of diverse neoplastic conditions. Nevertheless, there has been limited research focusing on the potential of PTM-related genes (PTMRGs) as tumor biomarkers for predicting the survival of specific patients. Methods: The datasets utilized in this research were obtained from the TARGET and GEO repositories, respectively. The gene signature was constructed through the utilization of LASSO Cox regression method. GSEA and GO was used to identify hub pathways associated with risk genes. The functionality of risk genes in osteosarcoma (OS) cell lines was verified through the implementation of the CCK-8 assay, cell cycle analysis, and immunofluorescence assay. Results: Two distinct PTM patterns and gene clusters were finally determined. Significant differences in the prognosis of patients were found among two different PTM patterns and gene clusters, so were in the function enrichment and the landscape of TME immune cell infiltration. Moreover, we examined two external immunotherapy cohorts and determining that patients in the low-risk group was more likely to profit from immunotherapy. In addition, we mapped the expression of the genes in the signature in distinct cells using single-cell analysis. Finally, CCK-8 assay, cell cycle analysis, and immunofluorescence assay were utilized to confirm that RAD21 was expressed and functioned in OS. Conclusion: In conclusion, this study elucidated the potential link between PTM and immune infiltration landscape of OS for the first time and provided a new assessment protocol for the precise selection of treatment strategies for patients with advanced OS.

Highly oriented BN-based TIMs with high through-plane thermal conductivity and low compression modulus.

In the pursuit of effective thermal management for electronic devices, it is crucial to develop insulation thermal interface materials (TIMs) that exhibit exceptional through-plane thermal conductivity, low thermal resistance, and minimal compression modulus. Boron nitride (BN), given its outstanding thermal conduction and insulation properties, has garnered significant attention as a potential material for this purpose. However, previously reported BN-based composites have consistently demonstrated through-plane thermal conductivity below 10 W m-1 K-1 and high compression modulus, whilst also presenting challenges in terms of mass production. In this study, low molecular weight polydimethylsiloxane (PDMS) and large-size BN were utilized as the foundational materials. Utilizing a rolling-curing integrated apparatus, we successfully accomplished the continuous preparation of large-sized, high-adhesion BN films. Subsequent implementation of stacking, cold pressing, and vertical cutting techniques enabled the attainment of a remarkable BN-based TIM, characterized by an unprecedented through-plane thermal conductivity of up to 12.11 W m-1 K-1, remarkably low compression modulus (55 kPa), and total effective thermal resistance (0.16 °C in2 W-1, 50 Psi). During the TIMs performance evaluation, our TIMs demonstrated superior heat dissipation capabilities compared with commercial TIMs. At a heating power density of 40 W cm-2, the steady-state temperature of the ceramic heating element was found to be 7 °C lower than that of the commercial TIMs. This pioneering feat not only contributes valuable technical insights for the development of high-performance insulating TIMs but also establishes a solid foundation for widespread implementation in thermal management applications across a range of electronic devices.

A Super-Adhesive 2D Diamond Smart Nanofluid with Self-Healing Properties and Multifunctional Applications.

Smart responsive materials are capable of responding to external stimuli and, compared to traditional materials, can be effectively reused and reduce usage costs in applications. However, smart responsive materials often face challenges such as the inability to repair extensive damage, instability in long-term performance, and inapplicability in extreme environments. This study combines 2D diamond nanosheets with organic fluorinated molecules to prepare a smart nanofluid (fluorinated diamond nanosheets, F-DN) with self-healing and self-adhesion properties. This smart nanofluid can be used to design various coatings for different applications. For example, coatings prepared on textured steel plates using the drop-casting method have excellent superhydrophobic and high oleophobic properties; coatings on titanium alloy plates achieve low friction and wear in the presence of lubricating additives of F-DN in perfluoropolyether (PFPE). Most impressively, coatings on steel plates not only provide effective corrosion resistance but also have the ability to self-heal significant damage (approximately 2 mm in width), withstand extremely low temperatures (-64 °C), and resist long-term corrosion factors (immersion in 3.5 wt % NaCl solution for 35 days). Additionally, it can act as a "coating glue" to repair extensive damage to other corrosion-resistant organic coatings and recover their original protective properties. Therefore, the smart nanofluid developed in this study offers diverse applications and presents new materials system for the future development of smart responsive materials.

Hyaluronic acid-poly(glyceryl)10-stearate nanoemulsion for co-delivery of fish oil and resveratrol: Enhancing bioaccessibility and antioxidant potency.

Hyaluronic acid (HA), an endogenous polysaccharide comprising alternating D-glucuronic acid and N-acetylglucosamine units, is renowned for its high hydrophilicity, biocompatibility, and biodegradability. These attributes have rendered HA invaluable across medical and drug delivery fields. HA can be altered through physical, chemical, or enzymatic methods to improve the properties of the modified substances. In this work, we synthesized a derivative via the esterification of HA with poly(glyceryl)10-stearate (PG10-C18), designated as HA-PG10-C18. This novel derivative was employed to fabricate a nano co-delivery system (HA-PG10-C18@Res-NE) for fish oil and resveratrol (Res), aiming to enhance their stability and bioaccessibility. An exhaustive investigation of HA-PG10-C18@Res-NE revealed that the HA-modified system displayed superior physicochemical stability, notably in withstanding oxidation and neutralizing free radicals. Moreover, in vitro simulated digestion underscored the system's enhanced bioaccessibility of Res and more efficient release of free fatty acids. These outcomes underscore the strategic advantage of HA in modifying PG10-C18 for nanoemulsion formulation. Consequently, HA-PG10-C18 stands as a promising emulsifier for encapsulating lipophilic bioactives in functional foods, nutraceuticals, and pharmaceuticals.

Low-Temperature and Fast-Charging Lithium Metal Batteries Enabled by Solvent-Solvent Interaction Mediated Electrolyte.

Lithium metal batteries utilizing lithium metal as the anode can achieve a greater energy density. However, it remains challenging to improve low-temperature performance and fast-charging features. Herein, we introduce an electrolyte solvation chemistry strategy to regulate the properties of ethylene carbonate (EC)-based electrolytes through intermolecular interactions, utilizing weakly solvated fluoroethylene carbonate (FEC) to replace EC, and incorporating the low-melting-point solvent 1,2-difluorobenzene (2FB) as a diluent. We identified that the intermolecular interaction between 2FB and solvent can facilitate Li+ desolvation and lower the freezing point of the electrolyte effectively. The resulting electrolyte enables the LiNi0.8Co0.1Mn0.1O2||Li cell to operate at -30 °C for more than 100 cycles while delivering a high capacity of 154 mAh g-1 at 5.0C. We present a solvation structure and interfacial model to analyze the behavior of the formulated electrolyte composition, establishing a relationship with cell performance and also providing insights for the electrolyte design under extreme conditions.

Exploiting Photoinduced Atom Transfer Radical Polymerizations with Boron-Dopant and Nitrogen-Defect Synergy in Carbon Nitride Nanosheets.

Graphitic carbon nitrides (g-C3N4) possess various benefits as heterogeneous photocatalysts, including tunable bandgaps, scalability, and chemical robustness. However, their efficacy and ongoing advancement are hindered by challenges like limited charge-carrier separation rates, insufficient driving force for photocatalysis, small specific surface area, and inadequate absorption of visible light. In this study, boron dopants and nitrogen defects synergy are introduced into bulk g-C3N4 through the calcination of a blend of nitrogen-defective g-C3N4 and NaBH4 under inert conditions, resulting in the formation of BCN nanosheets characterized by abundant porosity and increased specific surface area. These BCN nanosheets promote intermolecular single electron transfer to the radical initiator, maintaining radical intermediates at a low concentration for better control of photoinduced atom transfer radical polymerization (photo-ATRP). Consequently, this method yields polymers with low dispersity and tailorable molecular weights under mild blue light illumination, outperforming previous reports on bulk g-C3N4. The heterogeneity of BCN enables easy separation and efficient reuse in subsequent polymerization processes. This study effectively showcases a simple method to alter the electronic and band structures of g-C3N4 with simultaneously introducing dopants and defects, leading to high-performance photo-ATRP and providing valuable insights for designing efficient photocatalytic systems for solar energy harvesting.

Scanning the active center of formolase to identify key residues for enhanced C1 to C3 bioconversion.

BACKGROUND: Formolase (FLS) is a computationally designed enzyme that catalyzes the carboligation of two or three C1 formaldehyde molecules into C2 glycolaldehyde or C3 dihydroxyacetone (DHA). FLS lays the foundation for several artificial carbon fixation and valorization pathways, such as the artificial starch anabolic pathway. However, the application of FLS is limited by its low catalytic activity and product promiscuity. FINDINGS: FLS, designed and engineered based on benzoylformate decarboxylase from Pseudomonas putida, was selected as a candidate for modification. To evaluate its catalytic activity, 25 residues located within an 8 Å distance from the active center were screened using single-point saturation mutagenesis. A screening approach based on the color reaction of the DHA product was applied to identify the desired FLS variants. After screening approximately 5,000 variants (approximately 200 transformants per site), several amino acid sites that were not identified by directed evolution were found to improve DHA formation. The serine-to-phenylalanine substitution at position 236 improved the activity towards DHA formation by 7.6-fold. Molecular dynamics simulations suggested that the mutation increased local hydrophobicity at the active site, predisposing the cofactor-C2 intermediate to nucleophilic attack by the third formaldehyde molecule for subsequent DHA generation. CONCLUSIONS: This study provides improved FLS variants and valuable information into the influence of residues adjacent to the active center affecting catalytic efficiency, which can guide the rational engineering or directed evolution of FLS to optimize its performance in artificial carbon fixation and valorization.

ortho-Alkynyl Benzyl Alcohols as C6 Synthons in Regioselective Construction of Polysubstituted Naphthalenes.

A straightforward methodology for the assembly of polysubstituted naphthalenes from ortho-alkynyl benzyl alcohols, enabled by using catalytic amounts of Tf2O, has been developed. This transformation not only features transition-metal free and without using other bases and additives but also provides a new synthetic application for ortho-alkynyl benzyl alcohols, i.e., as C6 synthons for the construction of PAHs.

Macaque Brainnetome Atlas: A multifaceted brain map with parcellation, connection, and histology.

The rhesus macaque (Macaca mulatta) is a crucial experimental animal that shares many genetic, brain organizational, and behavioral characteristics with humans. A macaque brain atlas is fundamental to biomedical and evolutionary research. However, even though connectivity is vital for understanding brain functions, a connectivity-based whole-brain atlas of the macaque has not previously been made. In this study, we created a new whole-brain map, the Macaque Brainnetome Atlas (MacBNA), based on the anatomical connectivity profiles provided by high angular and spatial resolution ex vivo diffusion MRI data. The new atlas consists of 248 cortical and 56 subcortical regions as well as their structural and functional connections. The parcellation and the diffusion-based tractography were evaluated with invasive neuronal-tracing and Nissl-stained images. As a demonstrative application, the structural connectivity divergence between macaque and human brains was mapped using the Brainnetome atlases of those two species to uncover the genetic underpinnings of the evolutionary changes in brain structure. The resulting resource includes: (1) the thoroughly delineated Macaque Brainnetome Atlas (MacBNA), (2) regional connectivity profiles, (3) the postmortem high-resolution macaque diffusion and T2-weighted MRI dataset (Brainnetome-8), and (4) multi-contrast MRI, neuronal-tracing, and histological images collected from a single macaque. MacBNA can serve as a common reference frame for mapping multifaceted features across modalities and spatial scales and for integrative investigation and characterization of brain organization and function. Therefore, it will enrich the collaborative resource platform for nonhuman primates and facilitate translational and comparative neuroscience research.

ATP-free in vitro biotransformation of starch-derived maltodextrin into poly-3-hydroxybutyrate via acetyl-CoA.

In vitro biotransformation (ivBT) facilitated by in vitro synthetic enzymatic biosystems (ivSEBs) has emerged as a highly promising biosynthetic platform. Several ivSEBs have been constructed to produce poly-3-hydroxybutyrate (PHB) via acetyl-coenzyme A (acetyl-CoA). However, some systems are hindered by their reliance on costly ATP, limiting their practicality. This study presents the design of an ATP-free ivSEB for one-pot PHB biosynthesis via acetyl-CoA utilizing starch-derived maltodextrin as the sole substrate. Stoichiometric analysis indicates this ivSEB can self-maintain NADP+/NADPH balance and achieve a theoretical molar yield of 133.3%. Leveraging simple one-pot reactions, our ivSEBs achieved a near-theoretical molar yield of 125.5%, the highest PHB titer (208.3 mM, approximately 17.9 g/L) and the fastest PHB production rate (9.4 mM/h, approximately 0.8 g/L/h) among all the reported ivSEBs to date, and demonstrated easy scalability. This study unveils the promising potential of ivBT for the industrial-scale production of PHB and other acetyl-CoA-derived chemicals from starch.

Improving Interfacial and Compressive Properties of Polyimide Fiber by Constructing Inorganic Layers on Fiber Surface.

The compressive performance of organic fiber has always been a key problem, limiting its development. In this paper, silicon oxide, alumina, and titanium oxide particles were separately deposited on the surface of high-strength and high-modulus polyimide (PI) fibers to form a structural supporting shell by using a magnetron sputtering method. The theoretical thickness was calculated by thermogravimetric analysis in good agreement with the actual thickness determined from scanning electron microscopy. The mechanics, surface, and interface properties of the measured fibers were analyzed mainly from the aspects of surface energy, interfacial shear strength (IFSS), and compression strength. The results showed that after magnetron sputtering, the inorganic shells were uniformly deposited on the surface of PI fiber, resulting in an increase in the content of inorganic elements as well as the roughness. As a result, the surface energy and IFSS of silica-coated fiber was increased by 174 and 85.6%, respectively, and compression strength was increased by 45.7%. This study provides a new approach for improving the interface property and compression strength of high-strength and high-modulus PI-fiber-reinforced composites.

Comparison of the perioperative outcomes of robot-assisted laparoscopic transperitoneal versus retraperitoneal partial nephrectomy for posterior-lateral renal tumors: a systematic review and meta-analysis.

The study aims to assess the available literature and compare the perioperative outcomes of robotic-assisted partial nephrectomy (RAPN) for posterior-lateral renal tumors using transperitoneal (TP) and retroperitoneal (RP) approaches. Systematically searched the Embase, PubMed, and Cochrane Library databases for literature. Eligible studies were those that compared TP-RAPN and RP-RAPN for posterior-lateral renal tumors. The data from the included studies were analyzed and summarized using Review Manager 5.3, which involved comparing baseline patient and tumor characteristics, intraoperative and postoperative outcomes, and oncological outcomes. The analysis included five studies meeting the inclusion criteria, with a total of 1440 patients (814 undergoing RP-RAPN and 626 undergoing TP-RAPN). Both groups showed no significant differences in age, gender, BMI, R.E.N.A.L. score, and tumor size. Notably, compared to TP-RAPN, the RP-RAPN group demonstrated shorter operative time (OT) (MD: 17.25, P = 0.01), length of hospital stay (LOS) (MD: 0.37, P < 0.01), and lower estimated blood loss (EBL) (MD: 15.29, P < 0.01). However, no significant differences were found between the two groups in terms of warm ischemia time (WIT) (MD: -0.34, P = 0.69), overall complications (RR: 1.25, P = 0.09), major complications (the Clavien-Dindo classification ≥ 3) (RR: 0.97, P = 0.93), and positive surgical margin (PSM) (RR: 1.06, P = 0.87). The systematic review and meta-analysis suggests RP-RAPN may be more advantageous for posterior-lateral renal tumors in terms of OT, EBL, and LOS, but no significant differences were found in WIT, overall complications, major complications, and PSM. Both surgical approaches are safe, but a definitive advantage remains uncertain.

Size and fixation options of dorsoulnar fragments in distal radius fractures.

PURPOSE: This study aimed to investigate the influence of size and fixation options of dorsoulnar fragments on the clinical outcomes of distal radius fractures (DRFs). METHODS: This retrospective analysis was performed on 94 patients with DFR accompanied by dorsoulnar fragments, spanning the period from October 2018 to November 2022. Mean follow-up was 15.5 (range, 12-20) months. Patients were divided into small- (<5 %, n = 28), middle- (5-15 %, n = 50), and large- (>15 %, n = 16) sized groups according to articular involvement of dorsoulnar fragments determined by three-dimensional (3D) computed tomography (CT) modeling. Subdivision also took place for the presence of postoperative fragment displacement (>2 mm) and fixation methods including volar locking plate (VLP), VLP combined with dorsal hollow compression screw (VDS), and VLP combined with dorsal low-profile mini plate (VDP). The radiographic parameters (volar tilt, radial inclination, and radial height) and functional outcome measures of wrist range of motion, wrist function (DASH, PRWE), and wrist pain (VAS) were evaluated and compared between groups. RESULTS: Fracture healing was observed in all patients at final follow-up. No instances of dorsoulnar fragment displacement were observed in patients undergoing VDS and VDP treatment and the incidence of the dorsoulnar fragment displacement was 35 % (n = 8) in small-sized group, 21 % (n = 7) in middle-sized group, and 7 % (n = 1) in large-sized group when patients were treated with VLP. In small-sized group, no significant differences were found between patients with and without dorsoulnar fragment displacement in dorsiflexion restriction (10.6 ± 2.8°, 9.1 ± 2.3°, P = 0.159), pronosupination restriction (9.6 ± 2.1°, 8.6 ± 1.7°, P = 0.188), DASH (11.5 ± 4.1, 10.7 ± 3.2, P = 0.562), PRWE (11.9 ± 4.2, 10.6 ± 3.6, P = 0.425), and VAS (1.1 ± 1.1, 0.9 ± 1.0, P = 0.528). In middle-sized combined with large-sized group, the functional outcome measures of dorsiflexion restriction (12.5 ± 3.7°, 9.8 ± 2.9°, P = 0.022), DASH (14.6 ± 5.2, 11.4 ± 3.7, P = 0.030), and PRWE (15.0 ± 4.5, 11.3 ± 3.9, P = 0.016) were superior in patients without dorsoulnar fragment displacement. In patients treated with VLPs, no significant differences were found in dorsiflexion restriction (9.8 ± 2.5°, 10.8 ± 3.5°, 9.4 ± 2.5°, P = 0.299), pronosupination restriction (9.2 ± 1.9°, 10.1 ± 2.8°, 8.9 ± 1.5°, P = 0.200), DASH (11.1 ± 3.5, 12.9 ± 4.3, 11.1 ± 3.6, P = 0.162), PRWE (11.1 ± 3.9, 12.8 ± 4.2, 10.8 ± 3.9, P = 0.188), and VAS (1.0 ± 1.0, 1.4 ± 1.1, 0.9 ± 0.9, P = 0.151) between small-sized, middle-sized, and large-sized groups. In middle-sized group, no significant differences were found in dorsiflexion restriction (10.8 ± 3.5°, 9.4 ± 2.2°, 9.4 ± 2.4°, P = 0.316); pronosupination restriction (10.1 ± 2.8°, 8.8 ± 1.9°, 9.0 ± 2.5°, P = 0.314), DASH (12.9 ± 4.3, 10.3 ± 3.7, 10.5 ± 3.7, P = 0.133), PRWE (12.8 ± 4.2, 10.4 ± 3.8, 10.6 ± 4.1, P = 0.199), and VAS (1.4 ± 1.1, 0.8 ± 0.7, 1.0 ± 1.1, P = 0.201) between subgroups of VLP, VDS, and VDP. No significant differences were found in radiographic parameters between all groups compared. CONCLUSION: This study indicated that the strict reduction and fixation of a dorsoulnar fragment might be not essential when its articular involvement was less than 5 %. The volar locking plate (VLP) fixation was commonly effective in treating distal radius fractures accompanied by a dorsoulnar fragment involving over 15 % of the articular surface. Additionally, the use of an additional dorsal hollow compression screw or a dorsal low-profile mini plate can get good wrist function in the early-term follow-up when the dorsoulnar fragment involve 5-15 % of the articular surface.

Lung transcriptomics reveals the underlying mechanism by which aerobic training enhances pulmonary function in chronic obstructive pulmonary disease.

BACKGROUND: Aerobic training is the primary method of rehabilitation for improving respiratory function in patients with chronic obstructive pulmonary disease (COPD) in remission. However, the mechanism underlying this improvement is not yet fully understood. The use of transcriptomics in rehabilitation medicine offers a promising strategy for uncovering the ways in which exercise training improves respiratory dysfunction in COPD patients. In this study, lung tissue was analyzed using transcriptomics to investigate the relationship between exercise and lung changes. METHODS: Mice were exposed to cigarette smoke for 24 weeks, followed by nine weeks of moderate-intensity treadmill exercise, with a control group for comparison. Pulmonary function and structure were assessed at the end of the intervention and RNA sequencing was performed on the lung tissue. RESULTS: Exercise training was found to improve airway resistance and lung ventilation indices in individuals exposed to cigarette smoke. However, the effect of this treatment on damaged alveoli was weak. The pair-to-pair comparison revealed numerous differentially expressed genes, that were closely linked to inflammation and metabolism. CONCLUSIONS: Further research is necessary to confirm the cause-and-effect relationship between the identified biomarkers and the improvement in pulmonary function, as this was not examined in the present study.

Modification of traditional composite nonwovens with stable storage of light absorption transients and photodynamic antibacterial effect.

Combining photodynamic antimicrobials with nonwovens is prospective. However, common photosensitizers still have drawbacks such as poor photoactivity and the inability to charge. In this study, a photodynamic and high-efficiency antimicrobial protective material was prepared by grafting bis benzophenone-structured 4,4-terephthaloyl diphthalic anhydride (TDPA) photosensitizer, and antimicrobial agent chlorogenic acid (CA) onto spunbond-meltblown-spunbond (SMS) membranes. The charging rates for ·OH and H2O2 were 6377.89 and 913.52 µg/g/h. The light absorption transients structural storage remained above 69% for 1 month. High electrical capacity remained after seven cycles indicating its rechargeability and recyclability. The SMS/TDPA/CA membrane has excellent bactericidal performance when under illumination or lightless conditions, and the bactericidal efficiency of Escherichia coli and Staphylococcus aureus reached over 99%. The construction of self-disinfection textiles based on the photodynamic strategies proposed in this paper is constructive for expanding and promoting the application of textile materials in the medical field.

Off-label use of Baricitinib improves moderate and severe atopic dermatitis in China through inhibiting MAPK and PI3K/Akt/mTOR pathway via targeting JAK-STAT signaling of CD4+ cells.

As an inflammatory disease with a disrupted immune system, cytokine disorders in atopic dermatitis (AD) are closely related to the abnormal activation of JAK-STAT signal pathway. The critical relevance of the JAK-STAT signaling pathway to the pathogenesis of AD provides a strong rationale for JAK inhibitor research. Baricitinib, a small-molecule oral JAK inhibitor, has been proven to inhibit JAK-STAT signaling in a variety of diseases, including AD. It is currently available in China for off-label use. However, its efficacy in China and its mechanism are rarely reported. In our study, we found that the immune status of patients with moderate and severe AD was hyperactive. Among the 49 known immunotherapy targets, JAK1 and JAK2 genes on lymphocytes of AD patients were significantly upregulated, which was closely related to the symptom severity in moderate and severe AD patients. Baricitinib can improve immune hyperresponsiveness and clinical symptoms in moderate and severe AD by inhibiting the activation of Th2 cell subsets and the secretion of Th2-type cytokines through MAPK, mTOR and PI3K-Akt signaling pathways, providing an important theoretical basis for clinical off-label use of Baricitinib to treat moderate and severe AD.