"Deep masseteric triangular area to define masseter neurovascular bundle: A cadaveric study".

INTRODUCTION: Facial reanimation procedures are used in the treatment of the disorder that impairs mimetic function and jeopardizes physical and psychological health, and one of the most important instruments of these techniques is the masseteric neurovascular bundle (NVB) and proper identification at the mandibular notch level. In the current study, a triangular area (deep masseteric triangle, DMT) on the lateral surface of the masseter muscle that was identified to help reliable determination of the masseteric NVB at the mandibular notch level. MATERIAL AND METHODS: 40 parotideomasseteric region dissections were performed in 10 female and 10 male donated cadavers. Structures lateral to the masseter muscle were removed. The edge length of the masseter muscle on the zygomatic arch side was measured. After the edges of the DMT were measured, the masseteric NVB was found by dissection and its distance (depth) from the skin line was measured. RESULTS: The mean lengths of the superior, posterior, and anterior margins were 17.3 (±4.5) mm, 25.9 (±6.2) mm, and 26.3 (±6.5) mm, respectively. The total length of the upper edge of the masseteric muscle attached to the zygomatic arch averaged 52.7 (±5.2) mm. The masseteric neurovascular bundle was detected at a depth of approximately 17 mm from the skin of the parotideamasseteric region. DISCUSSION: The visualization of the DMT can be used as an important landmark for access to branch-free part of the masseteric nerve. Moreover, an specific approach for masseteric NVB localization can be established by drawing a line between the mandibular angle and the midpoint of the upper edge of the DMT. This technique can greatly improve the accuracy of both masseteric nerve harvesting and masseteric nerve block procedures.

Measurements of oculo-palpebral landmarks and evaluation of patient's head position.

PURPOSE: Keeping the head in a neutral position is requisite for glasses/lenses/head-up designs, the suitability of oculo-plastic surgery and for the grading the eye shift. Anatomically incompatible glasses are one of the common problems affecting accommodation, reducing comfort and disturbing by causing symptoms such as dizziness and nausea. The oculo-palpebral measurements act as a key determinant in symmetrical facial attractiveness. This study aims to investigate the most effective oculo-palpebral landmarks, head-neutral as the ideal position, taking into account of individual anatomical differences of these patients. METHODS: 100 females and 100 males aged between 18 and 20 years were photographed. Digital photogrammetric measurements were made with the ImageJ program. Interpupillary and interhelical distances, besides bilateral palpebral fissure length and height, and iris diameter were calculated on front-facing photographs. RESULTS: Mean interpupillary distance was measured wider in males than in females. The mean length of palpebral fissure was 31 mm; palpebral fissure height was 10 mm. These figures were valid in both eyes and gender. The interhelical distance was calculated as the mean and was measured longer in men. Since the measurement values were the same in both sexes and on both sides, they were determined as important landmarks for controlling the head-neutral position, evaluating whether there was a deviation in the eye, and measuring the numerical value when detected. CONCLUSION: It is essential to check the side-symmetry of the patient's palpebral fissure height, palpebral fissure length, diameter of iris and corneal depth during oculo-plastic invention and artificial design.

The tortuous course of the anterior ethmoidal artery in the orbit: A cadaveric study.

AIM: The study aimed to define the coursing pattern of the anterior ethmoidal artery (AEA) in the orbit to minimize complications during endoscopic interventions. MATERIALS AND METHODS: A total of ten formalin-fixed cadaveric halves were included in the study. Orbital regions were shown with a superior approach. The superior rectus and superior oblique muscles, as well as the connective tissue and vessels were removed to observe the path of the anterior ethmoidal artery. Measurements such as the width of the artery, the anterior-posterior length of the U formation, the length of the intraorbital part of the ophthalmic artery, and the distance of the AEA from its opthalmic origin to the anterior ethmoidal foramen were made. RESULTS: Ten of the AEAs originated from the ophthalmic artery. The AEA branches originated from the ophthalmic artery approximately 18.4 mm after the orbital artery entered the orbital, and the mean width of the AEAs was 0.82 mm. In seven of the total anterior ethmoidal arteries, they coursed in the intraethmoidal cavities below the cranial base. The mean distance from the origin of AEAs to the medial wall of the orbit was 4.9 mm. After leaving the ophthalmic artery, seven of the AEAs were coursing forward and turned back ('U' turn formation), which have proximately 1.5 mm in anteroposterior direction. CONCLUSION: The anterior ethmoidal artery is 0.8 mm wide, originates from the distal part of the ophthalmic artery, entering the orbit after a 1.5 mm U-turn.

The Upper Attachment of the Uncinate Process and Anterior Ethmoidal Artery.

OBJECTIVE: Variations in the upper attachment of the uncinate process (UP) are important because they can affect frontal sinus drainage and change the morphology. Functional endoscopic sinus surgery (FESS) is the primary technique used to treat chronic medically refractory rhinosinusitis. Uncinectomy is the basis of FESS technique to obtain the best possible result from surgery. The anterior ethmoidal artery (AEA) enters the nasal cavity through the orbital medial wall (lamina papyracea) may also be affected by the upper attachment of the UP. The aim of this study was to investigate a possible link between UP variations and the course of the AEA. MATERIALS AND METHODS: This retrospective, computed tomography (CT)-based, anatomic study was conducted on 200 healthy adults (100 females and 100 males) by screening bilateral paranasal sinus images. The upper attachment of the UP was classified in 6 types (1-6) based on the Liu classification. The AEA was divided into 4 types (A-D) based on location: anterior to the frontal sinus (A), between the frontal sinus and the middle nasal turbinate (B), and anterior to the posterior ethmoidal cells (C and D). All the CT images were evaluated simultaneously by 2 anatomists and 1 radiologist. RESULTS: Of the total cases (200 right and 200 left side), 48.8% were type 1 UP attachment, 11.0% type 2, 12% type 3, 9% type 4, 18% type 5, and 1.2% type 6. The AEAs were classified as 12.2% type A, 71.8% type B, 15.2% type C, and 0.8% type D. CONCLUSION: The course of the AEA through the nasal cavity was observed to shift anteriorly from the ethmoidal bulla to the frontal sinus in patients with UP attached to the lamina papyracea and middle turbinate. Remarkably, the AEA always coursed anterior from the middle nasal turbinate line.

Anatomical Basis for the Lower Eyelid Rejuvenation.

BACKGROUND: The tear trough, hollow concavity of the lower eyelid, is one of the recognizable signs of facial aging. Anatomical description is essential in improving tear through deformity for facial rejuvenation. METHODS: Fifty cadaver were microdissected. Fat pad types, fat herniation and the fibrous support system of lower lid were investigated. The areas of the fat compartments were compared using photogrammetry method and ImageJ software. RESULTS: Lower lids develop palpebral bags as a result of herniation of orbital fat against a weak orbital septum in all cases (%100). The attachment of the arcus marginalis at the orbital edge is a large contributor to the middle-aged appearance of the midface in all cases (100%). The most common type is Type 1 (36%). In this type, three distinct fat pads were diverged by arcuate expansion at lateral, fascia of the inferior oblique muscle at medial, as central, medial and lateral. Type 2 specimens (20%) were observed with two fat pads. Double convexity contour is in Type 3 cases (%44). It is determined that the medial fat pads are located in larger areas. Also, herniation is particularly evident in the medial and mediocentral fat pads. CONCLUSION: Analysis of the lower lid morphology enables surgeons to apply safe and effective procedures. The inferior oblique muscle and arcuate expansion structures should be supported and not be damaged during surgical interventions. Surgeons should focus mainly on the anatomical data obtained, and in this sense, surgeons apply them during aesthetic and reconstructive procedures of the lower eyelids. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

The Incidence of Accessory Ossicles of the Wrist: A Radiographic Study.

Objective Accessory ossicles of the wrist are generally asymptomatic and detected incidentally as radiological findings. These bones are rarely symptomatic but can produce pain in cases of impingement or direct trauma. More frequently, these bones are misinterpreted as avulsion fractures in trauma patients, which may lead to unnecessary immobilization and overtreatment. The aim of this study is to determine the incidence of accessory ossicles of the wrist and also determine if the incidence is related to age, gender, or ongoing wrist pain. Materials and Methods A total of 1146 wrist radiographs were included in the study. All radiographs were analyzed for the presence of 20 different accessory ossicles of the wrist. Patients were also divided into two groups, as with and without accessory ossicle. Two groups were compared in terms of age, gender, and side. Results About 113 accessory ossicles were detected in 111 (9.7%) radiographs. The most common accessory ossicles were os triangulare and os ulnostyloideum, and the least common accessory ossicles were os gruberi and os praetrapezium. Patients who had accessory ossicle had a significantly higher age than those who did not have accessory ossicle. There was no significant difference between the patients with and without accessory ossicle in terms of gender and side. Conclusions The results of this study showed that the most common accessory ossicles in the wrist were os triangulare and os ulnostyloideum, and the incidence of accessory bones increased with age. Clinical Relevance Since accessory ossicles of the wrist can be confused with fractures in trauma patients and are frequently ignored in patients presenting with pain, it is very important to know the incidence and distribution of these ossicles. Therefore, this study is important, in that it provides potentially guiding anatomical data for clinicians in terms of diagnosis and management.

Prevalence, coincidence and distribution patterns of sesamoid bones of the hand / Patrones de prevalencia, coincidencia y distribución de los huesos sesamoideos de la mano

SUMMARY: The aim of this study is to identify the prevalence and distribution patterns of sesamoid bones at the metacarpophalangeal (MCP) and interphalangeal (IP) joints and to determine if there is an association between the distribution patterns and age, gender, and hand side. Patients who had a direct radiograph of the hand obtained between 2019-2020 were retrospectively evaluated. All radiographs were evaluated in terms of the prevalence, coincidence, and distribution patterns of sesamoid bones. Presence of an association between distribution patterns and age, sex and side was also assessed. A total of 1501 hand radiographs were included into the study. There were 12 different patterns of sesamoid bone distribution. The most common distribution pattern was the presence of sesamoid bone at the first MCP joint only (25.8 %). There was a positive correlation between the second and third MCP, second and fifth MCP, second and first IP, third and fourth MCP and fifth MCP and first IP joints. The pattern with a sesamoid bone at the first MCP joint only was more prevalent among males, whereas the pattern involving coincidence of sesamoid bones at the first, second, fifth MCP and first IP joints was more prevalent among females (p<0.001, p=0.031). A positive correlation was observed between age and the number of MCP joints with sesamoid bones (p<0.001). The number of MCP joints with sesamoid bones was found to be higher in females (p<0.001). This study is important in that it provided anatomical data that can be guiding for clinicians in terms of diagnosis and management of hand disorders.

RESUMEN: El objetivo de este estudio fue identificar la prevalencia y los patrones de distribución de los huesos sesamoideos en las articulaciones metacarpofalángicas (MCF) e interfalángicas (IF) y determinar si existe una asociación entre los patrones de distribución y la edad, el sexo y el lado de la mano; fueron evaluadas retrospectivamente radiografías de la mano obtenidas en 2019- 2020. Todas las radiografías se evaluaron en términos de prevalencia, coincidencia y patrones de distribución de los huesos sesamoideos. También se evaluó la presencia de una asociación entre los patrones de distribución y la edad, el sexo y el lado. Se incluyeron en el estudio un total de 1501 radiografías de mano. Se observaron 12 patrones diferentes de distribución de los huesos sesamoideos. El patrón de distribución más común fue la presencia de hueso sesamoideo solo en la primera articulación MCF (25,8 %). Hubo una correlación positiva entre la segunda y la tercera MCF, la segunda y la quinta MCP, la segunda y la primera IF, la tercera y cuarta MCF y la quinta MCF y las primeras articulaciones IF. El patrón con un hueso sesamoideo en la primera articulación MCF fue más prevalente entre los hombres, mientras que el patrón de coincidencia de los huesos sesamoideos en la primera, segunda, quinta articulación MCF y la primera articulación IF fue más prevalente entre las mujeres (p <0.001, p = 0,031). Se observó una correlación positiva entre la edad y el número de articulaciones MCF con huesos sesamoideos (p <0,001). El número de articulaciones MCF con huesos sesamoideos era mayor en las mujeres (p <0,001). Este estudio es importante debido a que proporcionó datos anatómicos que pueden ser una guía para los médicos en el diagnóstico y tratamiento de los trastornos de la mano.

Topographic anatomical localization of the motor nerve entry points (MEPs) of the masseter muscle.

PURPOSE: The masseteric nerve, which is a branch of the mandibular nerve, passes lateral to the mandibular notch and then spreads in the muscle to achieve motor innervation. The muscle entry points of these motor branches are the target points of minimally invasive interventions preferred in the treatment of masseter hypertrophy. The aim of this study was to reveal the areas where the motor entry points are concentrated in the muscle by dividing the muscle into topographic regions using reliable anatomic landmarks. METHODS: Bilateral 20 masseter muscles (40 in total) belonging to 20 formalin-fixed cadavers (10 female and 10 male) were examined. The distribution of the nerve in the muscle and its motor entry points were demonstrated and marked on the muscle surface. The masseter muscle was divided into six areas by lines passing through reliable anatomical landmarks (Areas 1-6). RESULTS: The total number of MEPs was 231.The mean distance of the MEPs from the Line-1 was 27.4 ± 11 mm, and the same distance from the Line-6 was 30.32 ± 7.2 mm. Most of the MEPs (123/231) were located in Area-4. Area-6 was the second (82/231) and Area-5 (19/231) was the third. CONCLUSION: We suggest that interventions in Area-4 (especially in the middle part) may have less complications as a result of less relationship with surrounding anatomical structures and more effective with high MEP number.

Three-Dimensional Printed Anatomical Models Help in Correcting Foot Alignment in Hallux Valgus Deformities.

BACKGROUND: Hallux valgus (HV) is the most common pathologic entity affecting the great toe. The goal of corrective surgery is to restore foot mechanics and provide pain relief. The purpose of the study was to create individual angle using life-size foot models with three-dimensional (3D) printing technology to design a section on HV osteotomy. MATERIALS AND METHODS: Ten female patients with a diagnosis of HV were included. Radiologic [HV angle and intermetatarsal (IM) angle] and clinical [American Orthopaedic Foot and Ankle Score (AOFAS)] assessment was done pre- and postoperatively. All the operations were planned together with 3D life-size models generated from computed tomography (CT) scans. Benefits of using the 3D life-size models were noted. The 3D model's perception was evaluated. RESULTS: The mean AOFAS score, mean HV, and IM angles had improved significantly (P < 0.05). The visual and tactile inspection of 3D models allowed the best anatomical understanding, with faster and clearer comprehension of the surgical planning. At the first tarsometatarsal joint, the HV models showed significantly greater dorsiflexion, inversion, and adduction of the first metatarsal relative to the medial cuneiform. At the first metatarsophalangeal joint, the HV models showed significantly greater eversion and abduction of the first proximal phalanx relative to the first metatarsal. It provided satisfactory results about operation time and blood loss. 3D model's perception was statistically significant (P < 0.05). CONCLUSION: 3D models help to transfer complex anatomical information to clinicians, which provide guidance in the preoperative planning stage, for intraoperative navigation. It helps to create a patient-specific angle section on osteotomy to correct IM angle better and improve postoperative foot function. The 3D personalized model allowed for a better perception of information when compared to the corresponding 3D reconstructed image provided.

Anatomical description of the upper tarsal plate for reconstruction.

BACKGROUND: Reconstruction of the upper eyelids following traumatic, congenital and tumor surgeries is often difficult owing to a variety of reasons including the influence of the lacrimal system, visual system and aesthetic appearance. In most cases of the reconstruction in the upper eyelid tarsal plate is the main anatomical area that should be protected against the damage. The aim of this study is to investigate the types and the measurements of the tarsal plate of the upper eyelids in Anatolian population. METHODS: Fifty cadaver upper eyelids, tarsal plates were exposed to investigate the location, shape, position and their relationships to the upper eyelid. Their morphometric details such as linear analyses (vertical and horizontal) and ratio analyses were studied. As for the shape of the upper tarsal plate, it was categorized into three distinct types: sickle, trapezoid, and triangular type. RESULTS: The vertical height of the upper tarsal plate was the greatest at the central point 10.6 ± 1.1 mm, followed by the lateral point (7.81 ± 1.0 mm), and medial point (6.2 ± 0.8 mm) medially. The mean medial width of the upper tarsal plate was measured as 37.6 ± 4.1 mm and the lower width as 38.5 ± 4.6 mm. The base-central height ratio of the upper tarsal plate was approximately 0.28. For the upper eyelids, the shapes of tarsal plates were observed as sickle (48%), trapezoid (28%) and triangular (24%). Sickle type was the most frequent upper eyelid type. CONCLUSIONS: Considering the shielding function of the upper eyelid, tarsal plate, serves as fibrocartilaginous skeleton of the upper tarsal plate. In successful lid oculoplastic reconstructive surgery, tarsal plate may be restored by evaluating each patient individually to have symmetrical and youthful eyes. Although sickle tarsal plate is the most frequent type, personalized treatment requires measurement and classification. The findings manifest the necessity of oculoplastic surgical treatment peculiar to each individual. LEVEL OF EVIDENCE: I, Randomized controlled trial.