Biopharmaceutical profiling of anti-infective sanggenons from Morus alba root bark for inhalation administration.

Mulberry Diels-Alder-type adducts (MDAAs), isolated from Morus alba root bark, exhibit dual activity against viral and bacterial pathogens but show sobering efficacy following oral administration. Inhalation administration may overcome issues with oral bioavailability and improve efficacy for the treatment of respiratory infections. To assess the suitability of MDAAs for inhalation administration, physicochemical (e.g. pH, pKa, logP, pH-dependent solubility) and biopharmaceutical (epithelial cytotoxicity, permeability, and uptake) properties of two bioactive MDAA stereoisomers sanggenon C (SGC) and sanggenon D (SGD) were evaluated as isolated natural compounds and within parent extracts (MA21, MA60). Despite their structural similarity, SGD exhibited a 10-fold higher solubility than SGC across pH 1.2-7.4, with slight increases at neutral pH. Both compounds were more soluble in isolated form than in the parent extracts. The more lipophilic SGC was found to be more cytotoxic when compared to SGD, indicating a better cellular penetration, which was confirmed by uptake studies. Nonetheless, SGC and SGD exhibited no measurable permeability across intact Calu-3 monolayers, highlighting their potential for increased lung retention and improved local anti-infective activity following inhalation administration. Results suggest that SGC and SGD in isolated form, rather than as extracts, are promising candidates for pulmonary drug delivery to treat lung infections.

Intranasal Administration of Bedaquiline-Loaded Fucosylated Liposomes Provides Anti-Tubercular Activity while Reducing the Potential for Systemic Side Effects.

Liposomal formulations of antibiotics for inhalation offer the potential for the delivery of high drug doses, controlled drug release kinetics in the lung, and an excellent safety profile. In this study, we evaluated the in vivo performance of a liposomal formulation for the poorly soluble, antituberculosis agent, bedaquiline. Bedaquiline was encapsulated within monodisperse liposomes of ∼70 nm at a relatively high drug concentration (∼3.6 mg/mL). Formulations with or without fucose residues, which bind to C-type lectin receptors and mediate a preferential binding to macrophage mannose receptor, were prepared, and efficacy was assessed in an in vivo C3HeB/FeJ mouse model of tuberculosis infection (H37Rv strain). Seven intranasal instillations of 5 mg/kg bedaquiline formulations administered every second day resulted in a significant reduction in lung burden (∼0.4-0.6 Δlog10 CFU), although no differences between fucosylated and nonfucosylated formulations were observed. A pharmacokinetic study in healthy, noninfected Balb/c mice demonstrated that intranasal administration of a single dose of 2.5 mg/kg bedaquiline liposomal formulation (fucosylated) improved the lung bioavailability 6-fold compared to intravenous administration of the same formulation at the same dose. Importantly, intranasal administration reduced systemic concentrations of the primary metabolite, N-desmethyl-bedaquiline (M2), compared with both intravenous and oral administration. This is a clinically relevant finding as the M2 metabolite is associated with a higher risk of QT-prolongation in predisposed patients. The results clearly demonstrate that a bedaquiline liposomal inhalation suspension may show enhanced antitubercular activity in the lung while reducing systemic side effects, thus meriting further nonclinical investigation.

Interface Engineering of Water-Dispersible Near-Infrared-Emitting CuInZnS/ZnSe/ZnS Quantum Dots.

We report the synthesis of near-infrared (IR)-emitting core/shell/shell quantum dots of CuInZnS/ZnSe/ZnS and their phase transfer to water. The intermediate ZnSe shell was added to inhibit the migration of ions from the standard ZnS shell into the emitting core, which often leads to a blue shift in the emission profile. By engineering the interface between the core and terminal shell layer, the optical properties can be controlled, and emission was maintained in the near-IR region, making the materials attractive for biological applications. In addition, the hydrodynamic diameter of the particle was controlled using amphiphilic polymers.

Nanozymes for biomedical applications: Multi-metallic systems may improve activity but at the cost of higher toxicity?

Nanozymes are nanomaterials with intrinsic enzyme-like activity with selected advantages over native enzymes such as simple synthesis, controllable activity, high stability, and low cost. These materials have been explored as surrogates to natural enzymes in biosensing, therapeutics, environmental protection, and many other fields. Among different nanozymes classes, metal- and metal oxide-based nanozymes are the most widely studied. In recent years, bi- and tri-metallic nanomaterials have emerged often showing improved nanozyme activity, some of which even possess multifunctional enzyme-like activity. Taking this concept even further, high-entropy nanomaterials, that is, complex multicomponent alloys and ceramics like oxides, may potentially enhance activity even further. However, the addition of various elements to increase catalytic activity may come at the cost of increased toxicity. Since many nanozyme compositions are currently being explored for in vivo biomedical applications, such as cancer therapeutics, toxicity considerations in relation to nanozyme application in biomedicine are of vital importance for translation. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Toxicology and Regulatory Issues in Nanomedicine > Toxicology of Nanomaterials Diagnostic Tools > Diagnostic Nanodevices.

Using the High-Entropy Approach to Obtain Multimetal Oxide Nanozymes: Library Synthesis, In Silico Structure-Activity, and Immunoassay Performance.

High-entropy nanomaterials exhibit exceptional mechanical, physical, and chemical properties, finding applications in many industries. Peroxidases are metalloenzymes that accelerate the decomposition of hydrogen peroxide. This study uses the high-entropy approach to generate multimetal oxide-based nanozymes with peroxidase-like activity and explores their application as sensors in ex vivo bioassays. A library of 81 materials was produced using a coprecipitation method for rapid synthesis of up to 100 variants in a single plate. The A and B sites of the magnetite structure, (AA')(BB'B'')2O4, were substituted with up to six different cations (Cu/Fe/Zn/Mg/Mn/Cr). Increasing the compositional complexity improved the catalytic performance; however, substitutions of single elements also caused drastic reductions in the peroxidase-like activity. A generalized linear model was developed describing the relationship between material composition and catalytic activity. Binary interactions between elements that acted synergistically or antagonistically were identified, and a single parameter, the mean interaction effect, was observed to correlate highly with catalytic activity, providing a valuable tool for the design of high-entropy-inspired nanozymes.

Small polystyrene microplastics interfere with the breakdown of milk proteins during static in vitro simulated human gastric digestion.

Human ingestion of microplastics (MPs) is common and inevitable due to the widespread contamination of food items, but implications on the gastric digestion of food proteins are still unknown. In this study, the interactions between pepsin and polystyrene (PS) MPs were evaluated by investigating enzyme activity and conformation in a simulated human gastric environment in the presence or absence of PS MPs. The impact on food digestion was also assessed by monitoring the kinetics of protein hydrolysis through static in vitro gastric digestion of cow's milk contaminated with PS. The binding of pepsin to PS showed that the surface chemistry of MPs dictates binding affinity. The key contributor to pepsin adsorption seems to be π-π interactions between the aromatic residues and the PS phenyl rings. During quick exposure (10 min) of pepsin to increasing concentrations (222, 2219, 22188 particles/mL) of 10 µm PS (PS10) and 100 µm PS (PS100), total enzymatic activities were not affected remarkably. However, upon prolonged exposure at 1 and 2 h, preferential binding of pepsin to the small, low zeta-potential PS caused structural changes in the protein which led to a significant reduction of its activity. Digestion of cow's milk mixed with PS10 resulted in transient accumulation of larger peptides (10-35 kDa) and reduced bioavailability of short peptides (2-9 kDa) in the gastric phase. This, however, was only observed at extremely high PS10 concentration (0.3 mg/mL or 5.46E+05 particles/mL). The digestion of milk peptides, bound preferentially over pepsin within the hard corona on the PS10 surface, was delayed up to 15 min in comparison to bulk protein digestion. Intact caseins, otherwise rapidly digested, remained bound to PS10 in the hard corona for up to 15 min. This work presents valuable insights regarding the interaction of MPs, food proteins, and pepsin, and their dynamics during gastric digestion.

Profiling alveolar macrophage responses to inhaled compounds using in vitro high content image analysis.

One of the main hurdles in the development of new inhaled medicines is the frequent observation of foamy macrophage (FM) responses in non-clinical studies in experimental animals, which raises safety concerns and hinders progress into clinical trials. We have investigated the potential of a novel multi-parameter high content image analysis (HCIA) assay as an in vitro safety screening tool to predict drug induced FM. Rat (NR8383) and human U937-derived alveolar macrophages were exposed in vitro to a panel of model compounds with different biological activity, including inhaled bronchodilators, inhaled corticosteroids (ICS), phospholipidosis inducers and proapoptotic agents. An HCIA was utilized to produce drug-induced cell response profiles based on individual cell health, morphology and lipid content parameters. The profiles of both rat and human macrophage cell lines differentiated between cell responses to marketed inhaled drugs and compounds known to induce phospholipidosis and apoptosis. Hierarchical clustering of the aggregated data allowed identification of distinct cell profiles in response to exposure to phospholipidosis and apoptosis inducers. Additionally, in NR8383 cell responses formed two distinct clusters, associated with increased vacuolation with or without lipid accumulation. U937 cells presented a similar trend but appeared less sensitive to drug exposure and presented a narrower range of responses. These results indicate that our multi-parameter HCIA assay is suitable to generate characteristic drug-induced macrophage response profiles, thus enabling differentiation of foamy macrophage phenotypes associated with phospholipidosis and apoptosis. This approach shows great potential as pre-clinical in vitro screening tool for safety assessment of candidate inhaled medicines.

Amorphous Drug Nanoparticles for Inhalation Therapy of Multidrug-Resistant Tuberculosis.

Tuberculosis (TB) is one of the most prevalent infectious diseases. The global TB situation is further complicated by increasing patient numbers infected with Mycobacterium tuberculosis (M.tb.) strains resistant to either one or two of the first-line therapeutics, promoted by insufficient treatment length and/or drug levels due to adverse reactions and reduced patient compliance. An intriguing approach to improve anti-TB therapy relates to nanocarrier-based drug-delivery systems, which enhance local drug concentrations at infection sites without systemic toxicity. Recently developed anti-TB antibiotics, however, are lipophilic and difficult to transport in aqueous systems. Here, the very lipophilic TB-antibiotics bedaquiline (BDQ) and BTZ (1,3-benzothiazin-4-one 043) are prepared as high-dose, amorphous nanoparticles via a solvent-antisolvent technique. The nanoparticles exhibit mean diameters of 60 ± 13 nm (BDQ) and 62 ± 44 nm (BTZ) and have an extraordinarily high drug load with 69% BDQ and >99% BTZ of total nanoparticle mass plus a certain amount of surfactant (31% for BDQ, <1% for BTZ) to make the lipophilic drugs water-dispersible. Suspensions with high drug load (4.1 mg/mL BDQ, 4.2 mg/mL BTZ) are stable for several weeks. In vitro and in vivo studies employing M.tb.-infected macrophages and susceptible C3HeB/FeJ mice show promising activity, which outperforms conventional BDQ/BTZ solutions (in DMF or DMSO) with an up to 50% higher efficacy upon pulmonary delivery. In vitro, the BDQ/BTZ nanoparticles demonstrate their ability to cross the different biological barriers and to reach the site of the intracellular mycobacteria. In vivo, high amounts of the BDQ/BTZ nanoparticles are found in the lung and specifically inside granulomas, whereas only low BDQ/BTZ-nanoparticle levels are observed in spleen or liver. Thus, pulmonary delivered BDQ/BTZ nanoparticles are promising formulations to improve antituberculosis treatment.

Biocompatible Magnetic Conjugated Polymer Nanoparticles for Optical and Lifetime Imaging Applications in the First Biological Window.

Conjugated polymers are organic semiconductors that can be used for fluorescence microscopy of living specimens. Here, we report the encapsulation of the bright-red-emitting conjugated polymer, poly[{9,9-dihexyl-2,7-bis(1-cyanovinylene)fluorenylene}-alt-co-{2,5-bis(N,N'-diphenylamino)-1,4-phenylene}] (CN-FO-DPD), and superparamagnetic iron oxide nanoparticles (SPIONs) within poly(styrene-co-maleic anhydride) (PSMA) micelles. The resulting particles exhibited an emission peak at 657 nm, a fluorescence quantum yield of 21%, an average diameter of 65 nm, and a ζ potential of -30 mV. They are taken up by cells, and we describe their use in fluorescence microscopy of living Hela cells and zebrafish embryos and their associated cytotoxicity in HEK, HeLa, and HCE cells.

Comparative profiling and exposure assessment of microplastics in differently sized Manila clams from South Korea by µFTIR and Nile Red staining.

The accumulation of microplastics in marine organisms is an emerging concern. Due to trophic transfer, the safety of seafood is under investigation in view of the potential negative effects of microplastics on human health. In this study, market samples of Manila clams (Ruditapes philippinarum) from South Korea were segregated into two groups of considerably different size (p < 0.05), namely small clams with shell length of 40.69 ± 3.97 mm, and large clams of shell length 51.19 ± 2.86 mm. Comparative profiling of the number, size, shape, and polymer type of microplastics were performed using µFTIR imaging and Nile red staining. Overall, µFTIR detected only 1559 microplastics while 1996 microplastics were counted based on staining from 61 Manila clams (30 small and 31 large), leading to an overestimation of 18 to 75 %. Comparable microplastics concentration, based on µFTIR, were observed at 2.70 ± 1.66 MP/g or 15.64 ± 9.25 MP/individual for the small samples, and 3.65 ± 1.59 MP/g or 41.63 ± 16.90 MP/individual for the large ones (p > 0.05). Particle diameters of 20-100 µm was the most dominant, accounting for 44.6 % and 46.5 % of all microplastics from the small and large groups, respectively. Particles, with a circularity (resemblance to a circle) value between 0.6 and 1.0, were the most prevalent, followed by fragments and fibers. At least 50 % of microplastics from the small and large samples were polystyrene, making it the most abundant polymer type. Despite the substantial difference in the size of the animals, only a weak to moderate correlation was observed between microplastics content and the physical attributes of the clams such as shell length and weight, (soft) tissue weight, and total weight (Spearman's coefficient < 0.5). The estimated intake of microplastics by the Korean population was 1232 MP/person/year via small clams, 1663 MP/person/year via large clams, and 1489 MP/person/year via clams independent of size.

Investigating bolalipids as solubilizing agents for poorly soluble drugs: Effects of alkyl chain length on solubilization and cytotoxicity.

Synthetic single-chain bolalipids with symmetrical headgroups have shown potential in various pharmaceutical applications, such as the stabilization of liposome bilayers. Despite their amphiphilic character, synthetic bolalipids have not yet been investigated for their suitability as solubilizing agents for poorly soluble drug compounds. In this study, three synthetic single-chain bolalipids with increasing alkyl chain lengths (C22, C24 and C26) were investigated. All three bolalipids were able to achieve an increased solubility of the model drug, mefenamic acid, by approximately 180% in a pH 7.4 buffer compared to only a 102-105% increase achieved by sodium dodecyl sulfate (SDS) or the non-ionic surfactant pegylated hydroxystearate (PEG-HS). Subsequently, interfacial activity of bolalipids and their ability to destabilize liposomal bilayers were investigated. The C22 bolalipid exhibited a consistently lower interfacial activity, which was consistent with its significantly lower cytotoxicity in the macrophage-like cell line, J774. A1, compared to C24 and C26 counterparts. The mean IC50 values of the bolalipids tested (0.035-0.093 mM) were approximately 4-100-fold lower than that of SDS (0.401 mM) or PEG-HS (0.922 mM), with the mechanism of toxicity linked to increased cell membrane permeability, as is expected for surfactants. In summary, evidence from this study shows that decreasing the length of the bolalipid alkyl linker from C26 to C22 resulted in a significantly decreased cytotoxicity with no loss in drug solubilization efficiency.

Theranostic Near-Infrared-Active Conjugated Polymer Nanoparticles.

Conjugated polymer nanoparticles (CPNs) based on a common solar cell material (PTB7) have been prepared, and their potential in theranostic applications based on bioimaging and photosensitizing capabilities has been evaluated. The main absorption and emission bands of the prepared CPNs both fell within the NIR-I (650-950 nm) transparency window, allowing facile and efficient implementation of our CPNs as bioimaging agents, as demonstrated in this work for A549 human lung cancer cell cultures. The prepared CPN samples were also shown to produce reactive oxygen species (ROS) upon photoexcitation in the near-infrared or ultraviolet spectral regions, both in aqueous solutions and in HaCaT keratinocyte cell cultures. Importantly, we show that the photosensitizing ability of our CPNs was largely determined by the nature of the stabilizing shell: coating the CPNs with a Pluronic F-127 copolymer led to an improvement of photoinitiated ROS production, while using poly[styrene-co-maleic anhydride] instead completely quenched said process. This work therefore demonstrates that the photosensitizing capability of CPNs can be modulated via an appropriate selection of stabilizing material and highlights the significance of this parameter for the on-demand design of theranostic probes based on CPNs.

Drug reformulation for a neglected disease. The NANOHAT project to develop a safer more effective sleeping sickness drug.

BACKGROUND: Human African trypanosomiasis (HAT or sleeping sickness) is caused by the parasite Trypanosoma brucei sspp. The disease has two stages, a haemolymphatic stage after the bite of an infected tsetse fly, followed by a central nervous system stage where the parasite penetrates the brain, causing death if untreated. Treatment is stage-specific, due to the blood-brain barrier, with less toxic drugs such as pentamidine used to treat stage 1. The objective of our research programme was to develop an intravenous formulation of pentamidine which increases CNS exposure by some 10-100 fold, leading to efficacy against a model of stage 2 HAT. This target candidate profile is in line with drugs for neglected diseases inititative recommendations. METHODOLOGY: To do this, we evaluated the physicochemical and structural characteristics of formulations of pentamidine with Pluronic micelles (triblock-copolymers of polyethylene-oxide and polypropylene oxide), selected candidates for efficacy and toxicity evaluation in vitro, quantified pentamidine CNS delivery of a sub-set of formulations in vitro and in vivo, and progressed one pentamidine-Pluronic formulation for further evaluation using an in vivo single dose brain penetration study. PRINCIPAL FINDINGS: Screening pentamidine against 40 CNS targets did not reveal any major neurotoxicity concerns, however, pentamidine had a high affinity for the imidazoline2 receptor. The reduction in insulin secretion in MIN6 ß-cells by pentamidine may be secondary to pentamidine-mediated activation of ß-cell imidazoline receptors and impairment of cell viability. Pluronic F68 (0.01%w/v)-pentamidine formulation had a similar inhibitory effect on insulin secretion as pentamidine alone and an additive trypanocidal effect in vitro. However, all Pluronics tested (P85, P105 and F68) did not significantly enhance brain exposure of pentamidine. SIGNIFICANCE: These results are relevant to further developing block-copolymers as nanocarriers, improving BBB drug penetration and understanding the side effects of pentamidine.

Cytocompatibility and cellular interactions of chondroitin sulfate microparticles designed for inhaled tuberculosis treatment.

Tuberculosis remains a leading cause of death, therapeutic failure being mainly due to non-compliance with prolonged treatments, often associated with severe side-effects. New therapeutic strategies are demanded and, considering that the lung is the primary site of infection, direct lung delivery of antibiotics is possibly an effective approach. Therapeutic success in this context depends on suitable carriers that reach the alveoli where Mycobacterium hosts (macrophages) reside, as well as on their ability to promote macrophage capture and intracellular accumulation of drugs. In this work, we propose inhalable polymeric microparticles produced from chondroitin sulfate, a polymer composed by moieties recognized by macrophage receptors. Spray-drying of chondroitin sulfate in combination with two first-line antitubercular drugs (isoniazid and rifabutin) yielded respirable microparticles that evidenced no cytotoxic effects on lung epithelial cells (A549) and macrophages (dTHP1 and J744A.1). The microparticles exhibited tendency for macrophage capture in a dose-dependent manner, which was validated through imaging. High content image analysis revealed that rifabutin induced a dose-dependent increase in phospholipid content of macrophages, which could be prevented by formulation in chondroitin sulfate microparticles. This work provides indications on the potential of chondroitin sulfate carriers to interact with macrophages, thus providing a platform for drug delivery in the context of macrophage intracellular diseases, namely tuberculosis.

Development of Lipid Nanocarriers for Tuberculosis Treatment: Evaluation of Suitable Excipients and Nanocarriers.

BACKGROUND: Lipid nanocarriers have been widely tested as drug delivery systems to treat diseases due to their bioavailability, controlled release, and low toxicity. For the pulmonary route, the Food and Drug Administration favors the use of substances generally recognized as safe, as well as biodegradable and biocompatible to minimize the possibility of toxicity. Tuberculosis (TB) remains a public health threat worldwide, mainly due to the long treatment duration and adverse effects. Therefore, new drug delivery systems for treating TB are needed. OBJECTIVE: Physicochemical characterization of different lipid-based nanocarriers was used to optimize carrier properties. Optimized systems were incubated with Mycobacterium tuberculosis to assess whether lipid-based systems act as the energy source for the bacteria, which could be counterproductive to therapy. METHODS: Several excipients and surfactants were evaluated to prepare different types of nanocarriers using high-pressure homogenization. RESULTS: A mixture of trimyristin with castor oil was chosen as the lipid matrix after differential scanning calorimetry analysis. A mixture of egg lecithin and PEG-660 stearate was selected as an optimal surfactant system, as this mixture formed the most stable formulations. Three types of lipid nanocarriers, solid lipid nanoparticles, nanostructured lipid carriers (NLC), and nanoemulsions, were prepared, with the NLC systems showing the most suitable properties for further evaluation. It may provide the advantages of increasing the entrapment efficiency, drug release, and the ability to be lyophilized, producing powder for pulmonary administration as an alternative to entrap poor water-soluble molecules. CONCLUSION: Furthermore, the NLC system can be considered for use as a platform for the treatment of TB through the pulmonary route.

Poly(lactide-co-glycolide) Nanoparticles Mediate Sustained Gene Silencing and Improved Biocompatibility of siRNA Delivery Systems in Mouse Lungs after Pulmonary Administration.

Pulmonary delivery of small interfering RNA (siRNA)-based drugs is promising in treating severe lung disorders characterized by the upregulated expression of disease-causing genes. Previous studies have shown that the sustained siRNA release in vitro can be achieved from polymeric matrix nanoparticles based on poly(lactide-co-glycolide) (PLGA) loaded with lipoplexes (LPXs) composed of cationic lipid and anionic siRNA (lipid-polymer hybrid nanoparticles, LPNs). Yet, the in vivo efficacy, potential for prolonging the pharmacological effect, disposition, and safety of LPNs after pulmonary administration have not been investigated. In this study, siRNA against enhanced green fluorescent protein (EGFP-siRNA) was either assembled with 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) to form LPX or co-entrapped with DOTAP in PLGA nanoparticles to form LPNs. The disposition and clearance of LPXs and LPNs in mouse lungs were studied after intratracheal administration by using single-photon emission computed tomography/computed tomography (SPECT/CT) and gamma counting. Fluorescence spectroscopy, Western blot, and confocal laser scanning microscopy were used to evaluate the silencing of the EGFP expression mediated by the LPXs and LPNs after intratracheal administration to transgenic mice expressing the EGFP gene. The in vivo biocompatibility of LPXs and LPNs was investigated by measuring the cytokine level, total cell counts in bronchoalveolar lavage fluid, and observing the lung tissue histology section. The results showed that the silencing of the EGFP expression mediated by LPNs after pulmonary administration was both prolonged and enhanced as compared to LPXs. This may be attributed to the sustained release characteristics of PLGA, and the prolonged retention in the lung tissue of the colloidally more stable LPNs in comparison to LPXs, as indicated by SPECT/CT. The presence of PLGA effectively alleviated the acute inflammatory effect of cationic lipids to the lungs. This study suggests that PLGA-based LPNs may present an effective formulation strategy to mediate sustained gene silencing effects in the lung via pulmonary administration.

Investigating conjugated polymer nanoparticle formulations for lateral flow immunoassays.

Lateral flow immunoassays (LFI) are valuable tools for point-of-care testing. However, their sensitivity is limited and can be further improved. Nanoparticles (NP) of conjugated polymers (CPNs), also known as Pdots, are reported to be highly sensitive fluorescent probes, but a direct comparison with conventional colloidal gold-based (Au-NP) LFI using the same antibody-antigen pair is missing to date. Furthermore, the influence of brightness and Stokes shift of CPs on the signal : background ratio (SBR) needs to be evaluated. In this study, we encapsulated two different CPs, poly-(9,9-di-n-octyl-fluorenyl-2,7-diyl) (PDOF) and poly-(2,5-di-hexyloxy-cyanoterephthalylidene) (CN-PPV) in silica shell-crosslinked Pluronic© micelles (Si-NP) and Pdots and investigated the NP brightness with respect to CP loading dose. The brightest formulation of each NP system was conjugated to rabbit IgG as a model antigen and the SBR was investigated in an ELISA-like microplate assay and LFI. Two reference particles, Au-NP and a polystyrene NP (PS-NP) loaded with a small-molecule fluorescent dye were conjugated to IgG and compared to the Si-NP and Pdots. The mass of Pdots required for detection in LFI was at least two orders of magnitude lower than that of Si-NP and the reference NP. The SBR of CN-PPV (moderate brightness, large Stokes shift) was two to three times higher than the SBR of PDOF (high brightness, small Stokes shift). To combine the favourable properties of both CPs, a polymer blend of PDOF and CN-PPV was encapsulated in Pdots, and resulted in further increase of SBR in the microplate assay and LFI. In summary, combining two CPs with different properties can lead to fluorescent signal-transducers for applications such as ELISA and LFIs, which can enhance the detection limit of the assay by 2-3 orders of magnitude.

Supported polymer/lipid hybrid bilayers formation resembles a lipid-like dynamic by reducing the molecular weight of the polymer.

Amphiphilic block copolymers form self-assembled bilayers even in combination with phospholipids. They represent an attractive alternative to native lipid-based membrane systems for supported bilayer formation with applications in biomedical research, sensoring and drug delivery. Their enhanced stability and excellent mechanical properties are linked to their higher molecular weight which generates thicker bilayers. Hypothesis: It is hypothesized that reducing the molecular weight of the polymer facilitates the formation of a thinner, more homogeneous polymer/lipid hybrid bilayer which would benefit the formation of supported bilayers on silicon oxide. Experiment: We investigated hybrid bilayers composed of mixtures of 1-palmitoyl-2-oleoyl-glycero-3-phosphocholine and increasing amounts of a low molecular weight polybutadiene-b-polyethylene oxide copolymer (1050 g/mol). By assessing the bilayer thickness and the molecular packing behavior we sought to demonstrate how reducing the polymer molecular weight increases the tendency to form supported hybrid bilayers in a lipid-like manner. Findings: The formation of a supported hybrid bilayers occurs at polymer contents <70 mol% in a lipid-like fashion and is proportional to the cohesive forces between the bilayer components and inversely related to the bilayer hydrophobic core thickness and the extended brush regime of the PEGylated polymeric headgroup.

Different PEG-PLGA Matrices Influence In Vivo Optical/Photoacoustic Imaging Performance and Biodistribution of NIR-Emitting π-Conjugated Polymer Contrast Agents.

The π-conjugated polymer poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b0]-dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)] (PCPDTBT) with deep-red/near-infrared (NIR) absorption and emission has been investigated as a contrast agent for in vivo optical and photoacoustic imaging. PCPDTBT is encapsulated within poly(ethylene glycol) methyl ether-block-poly(lactide-co-glycolide) (PEG2kDa -PLGA4kDa or PEG5kDa -PLGA55kDa ) micelles or enveloped by the phospholipid, 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000] (PEG2kDa -DPPE), to investigate the formulation effect on imaging performance, biodistribution, and biocompatibility. Nanoparticles that meet the quality requirements for parenteral administration are generated with similar physicochemical properties. Optical phantom imaging reveals that both PEG-PLGA systems exhibit a 30% higher signal-to-background ratio (SBR) than PEG2kDa -DPPE. This trend cannot be observed in a murine HeLa xenograft model following intravenous administration since dramatic differences in biodistribution are observed. PEG2kDa -PLGA4kDa systems accumulate more rapidly in the liver compared to other formulations and PEG2kDa -DPPE demonstrates a higher tumor localization. Protein content in the "hard" corona differs between formulations (PEG2kDa -DPPE < PEG2kDa -PLGA4kDa < PEG5kDa -PLGA55kDa ), although this observation alone does not explain biodistribution patterns. PEG2kDa -PLGA4kDa systems show the highest photoacoustic amplitude in a phantom, but also a lower signal in the tumor due to differences in biodistribution. This study demonstrates that formulations for conjugated polymer contrast agents can have significant impact on both imaging performance and biodistribution.

Tuberculosis Treatment Facilitated by Lipid Nanocarriers: Can Inhalation Improve the Regimen?

Tuberculosis (TB) remains a major global health problem. Conventional treatments fail either because of poor patient compliance with the drug regimen or due to the emergence of multidrug-resistant TB. Thus, not only has the discovery of new compounds and new therapeutic strategies been the focus of many types of research but also new routes of administration. Pulmonary drug delivery possesses many advantages, including the noninvasive route of administration, low metabolic activity, and control environment for systemic absorption, and avoids first-pass metabolism. The use of lipid nanocarriers provides several advantages such as protection of the compound's degradation, increased bioavailability, and controlled drug release. In this study, we review some points related to how the use of lipid nanocarriers can improve TB treatment with inhaled nanomedicines. This review also discusses the current approaches and formulations developed to achieve optimal pulmonary drug delivery systems with nanocarriers targeting alveolar macrophages.