Extraction of microcrystalline cellulose from Ficus benghalensis leaf and its characterization.

Microcrystalline cellulose (MCC) is a crucial component in various industries, including pharmaceuticals, culinary, and cosmetics. The growing demand for MCC has spurred research into extraction methods. This study focused on extracting MCC from Ficus benghalensis using acid hydrolysis to convert the alpha-cellulose content of its leaves into MCC. The solvent used in this process was recyclable for further use. The extracted MCC was characterized by its physicochemical properties, including density, yield percentage, and structural characteristics. The yield was approximately 39.68 %, and the density was low at 1.518 g/cm3, making it suitable for filler applications. Fourier transform spectroscopy and UV-visible analysis identified functional groups of cellulose. X-ray diffraction analysis revealed a crystallite size of 1.560 nm and a crystallinity index of 66.43 %, indicating suitability for related applications. ImageJ determined a mean particle size of 36.545 µm, while scanning electron microscopy showed distinct surface orientations. Atomic force microscopy revealed surface roughness, root mean square, ten-point average roughness, skewness, and kurtosis. Elemental analysis indicated high concentrations of carbon (20.1 %) and oxygen (34 %). Based on these physicochemical features, the extracted MCC could be a valuable source for applications such as filler in reinforcement technology and coating material in pharmaceutical products.

Characterization of Calotropis gigantiea plant leaves biomass-based bioplasticizers for biofilm applications.

The present surge in environmental consciousness has pushed for the use of biodegradable plasticizers, which are sustainable and abundant in plant resources. As a result of their biocompatibility and biodegradability, Calotropis gigantiea leaf plasticizers (CLP) serve as viable alternatives to chemical plasticizers. First time, the natural plasticizers from the Calotropis leaves were extracted for this study using a suitable chemical approach that was also environmentally friendly. The XRD results showed a reduced crystallinity index of 20.2 % and a crystalline size of 5.3 nm, respectively. TGA study revealed that the CLP has good thermal stability (244 °C). Through FT-IR study, the existence of organic compounds in CLP can be investigated by key functional groups such as alcohol, amine, amide, hydrocarbon, alkene, aromatic, etc. Further the presence of alcoholic, amino, and carboxyl constituents was confirmed by UV investigation. SEM, EDAX analysis, and AFM are used to examine the surface morphology of the isolated plasticizer. SEM pictures reveal rough surfaces on the CLP surface pores, which makes them suitable for plasticizing new bioplastics with improved mechanical properties. Poly (butylene adipate-co-terephthalate) (PBAT), a biodegradable polymer matrix, was used to investigate the plasticization impact after the macromolecules were characterised. The biofilm PBAT/CLP had a thickness of 0.8 mm. In addition, the reinforcement interface was examined using scanning electron microscopy. When CLP is loaded differently in PBAT, the tensile strength and young modulus change from 15.30 to 24.60 MPa and from 137 to 168 MPa, respectively. CLP-reinforced films demonstrated better surface compatibility and enhanced flexibility at a loading of 2 % when compared to pure PBAT films. Considering several documented characteristics, CLP may prove to be an excellent plasticizer for resolving environmental issues in the future.

Pedalium murex plant-based bioplasticizer reinforced polylactic acid films: A promising approach for biodegradable fruit packaging applications.

The most likely materials for use in packaging are plastics. A lot of synthetic polymers are harming the environment. A plasticizer is required for all polymers to improve their characteristics and workability. The plasticizers come in liquid form and are also derived from fossil fuels, which are harmful to the environment. Producing functional and affordable biopolymer for packaging applications is a difficult task nowadays. The preparation of biofilm for packaging using biopolymer and bioplasticizer is the main aim of this work. The biopolymer poly L-lactic acid (PLA) is used, and the bio plasticizer is extracted from Pedalium murex plant. Chemical and mechanical methods are used to extract the plasticizer. Plasticization of polylactic acid biopolymer was done using the extracted plasticizer at additions of 1 %, 2 %, 3 %, 4 %, and 5 %. FT-IR spectroscopy, X-ray diffraction spectroscopy, and surface roughness values are used to characterise the prepared biofilms. Scanning electron spectroscopy pictures are utilised to evaluate the morphological orientation of the biofilms. Strawberries packed with biofilms are used to evaluate the barrier properties of biofilms using UV spectroscopy analysis. Thermal degradation behaviour is investigated using thermo gravimetric analysis. We examined the mechanical characteristics, such as tensile strength, elongation modulus, and elongation break percentage. The plasticizing effect of the plasticizer raises the elongation break percentage while decreasing the tensile strength and modulus. For 2 % plasticizer addition the elongation break increases and the tensile not much affected. To demonstrate biodegradability and microbial resistance, the soil degradation behaviour and antimicrobial activities were examined.

Isolation and characterization of novel bioplasticizers from rose (Rosa damascena Mill.) petals and its suitability investigation for poly (butylene adipate-co-terephthalate) biofilm applications.

The current growing environmental awareness has forced the use of biodegradable plasticizers, which are sustainable and abundant in plant resources. Rose petal plasticizers (RPP) act as an actual substitute for chemical plasticizers in this situation as they are biocompatible and biodegradable. Chemical procedures like amination, alkalization, and surface catalysis are used to extract the natural emollients from rose petals. XRD, FT-IR, and UV studies were used to understand the characteristics of the rose petal plasticizer. Based on the XRD data, the RPP's crystallinity size (CS) and crystallinity index (CI) values were determined to be 9.36 nm and 23.87%, respectively. The surface morphology of the isolated plasticizer is investigated using SEM, EDAX analysis and AFM. RPP surface pores with rough surfaces are visible in SEM images, which make them appropriate for plasticizing novel bioplastics with superior mechanical qualities. The plasticizer's heat degradation behaviour is investigated using thermogravimetric and differential thermogram analysis curves. Following the characterization of the synthesised molecules, the plasticization effect was examined using a biodegradable polymer matrix called poly (butylene adipate-co-terephthalate) (PBAT). The reinforcement interface was also examined using scanning electron microscopy analysis. RPP-reinforced films demonstrated greater flexibility and superior surface compatibility at a 5% loading compared to PBAT-only films. Based on a number of reported features, RPP could be a great plasticizer to address future environmental problems.

Facile exfoliation and physicochemical characterization of Thespesia populnea plant leaves based bioplasticizer macromolecules reinforced with polylactic acid biofilms for packaging applications.

Plasticizers are active ingredients added to the polymer to increase its workability. Since synthetic plasticizer is not ecofriendly and toxic in nature, it is a real cause for concern. On this basis, our study focuses on plasticizer extraction from plant-based resources. In this research work, Thespesia populnea leaves are utilized for the isolation of biological macromolecules with a plasticizing effect for biofilm applications. This extraction process is done through solvent extraction, amination, slow pyrolysis, and surface catalysis process. The physico-chemical and microstructural characterization of novel plasticizer particles were studied for the first time. The lower crystallinity index and crystalline size obtained from X-ray diffraction is 50.08 % and 20.45 nm respectively. Energy dispersive spectroscopy, particle sizer analysis, atomic force microscopy, and scanning electron microscopy are used to assess surface morphology of this plasticizer. The thermogram and differential thermal analysis curves give the information about degradation behavior of plasticizers and their thermal stability. The glass transition temperature of the extracted plasticizer is 60.56 °C. The plasticizing effect of the plasticizer is studied through film fabrication of polylactic acid which was blended with the extracted plasticizer. The mechanical property of biofilm was improved with the addition of plasticizer. The elongation break percentage (for 5 % plasticizer 46.12 %) was increased compared to others with moderate tensile strength. However, the tensile and elongation modulus decreases with the increase of plasticizer content. The crystallinity of the PLA film was improved after the plasticization. The thermal stability also increased with 3 % addition of the plasticizer. The isolated plasticizer was soluble in water and its molecular weight ≈380.

Isolation and characterization of microcrystalline cellulose from an agro-waste tamarind (Tamarindus indica) seeds and its suitability investigation for biofilm formulation.

The exploration of potential bio-fillers for bio-film application is a promising approach to ensure biodegradable, eco-friendly, good-quality materials with high-performance applications. This is a comprehensive study executed to establish the utility of an agro-waste Tamarindus indica seeds for microcrystalline cellulose production and to assess its feasibility for biofilm fabrication. The extraction was carried out through consecutive chemical-mediated alkalization, acid hydrolysis and bleaching. The isolated microcrystalline cellulose from Tamarindus indica seeds (TSMCC) was characterized through chemical, thermal and morphological characterization to validate the cellulose contribution, thermal resistance, and compatibility of the material. The physical parameters as density and yield percentage were assessed to evaluate its light-weight utility and economic productivity. These examinations revealed that TSMCC has good specific properties such as high cellulose content (90.57 %), average density (1.561 g/cm3), feasible average roughness (12.161 nm), desired particle size (60.40 ± 21.10 µm), good crystallinity (CI-77.6 %) and thermal stability (up to 230 °C); which are worthwhile to consider TSMCC for bio-film formulation. Subsequently, bio-films were formulated by reinforcing TSMCC in polylactic acid (PLA) matrix and the mechanical properties of the bio-films were then studied to establish the efficacy of TSMCC. It is revealed that the properties of pure PLA film increased after being incorporated with TSMCC, where 5 %TSMCC addition showed greater impact on crystalline index (26.16 % to 39.62 %), thermal stability (333oc to 389 °C), tensile strength (36.11 ± 2.90 MPa to 40.22 ± 3.22 MPa) and modulus (2.62 ± 0.55GPa to 4.15 ± 0.53GPa). In light of all promising features, 5 % TSMCC is recommended as a potential filler reinforcement for the groundwork of good quality bio-films for active packaging applications in future.

Exfoliation and physico-chemical characterization of novel bioplasticizers from Nelumbo nucifera leaf for biofilm application.

Due to the extreme threats as environmental and health issues caused by the petroleum-based leachable plasticizers, researchers among different domains are more interested in finding unique biodegradable plasticizers from natural sources. The present study used Nelumbo nucifera leaf to extract novel biopolymers as viable substitutes for chemical plasticizers. The biopolymers extraction was carried out through chemical means and its physico-chemical and morphological characterization were carried out to confirm its plastic nature. The polymers extracted possess a low glass transition temperature (77.17 °C), good thermal stability (230 °C), low density (0.94 g/cc), good surface roughness (34.154 µm), low crystallinity index (25.1%) and moderate crystallite size (16.36 nm). The presence of an organic polymer with specific chemical groups as olefinic alkenes, epoxide, imino/azo groups, and hydrophobic organic siloxane groups, signify that the material is a condensed phenolic derivative. Furthermore, bio-film was formulated using NLP and poly lactic acid (PLA) matrix to evaluate its plasticizing effect and film-forming ability. Variation in specific properties of film was noted after bio-plasticizer addition, where tensile strength (20.94 ± 1.5 MPa to 19.22 ± 1.3 MPa) and Young's modulus (1.462 ± 0.43 GPa to 1.025 ± 0.52 GPa) was found to be decreased whereas increased the percentage of elongation at break (26.30 ± 1.1% to 39.64 ± 1.6%). In addition, decreased glass transition temperature (Tg) (59.17 °C), good surface compatibility, and increased flexibility of NLP-PLA film in contrast to pure PLA film authorizes the plasticizing effect of bio-plasticizers on PLA. Since the extracted bio-plasticizers could be a suitable replacement to harmful synthetic plasticizers for lightweight packaging applications in bioplastics sector.