ABSTRACT
The order Acipenseriformes, which includes sturgeons and paddlefishes, represents "living fossils" with complex genomes that are good models for understanding whole-genome duplication (WGD) and ploidy evolution in fishes. Here, we sequenced and assembled the first high-quality chromosome-level genome for the complex octoploid Acipenser sinensis (Chinese sturgeon), a critically endangered species that also represents a poorly understood ploidy group in Acipenseriformes. Our results show that A. sinensis is a complex autooctoploid species containing four kinds of octovalents (8n), a hexavalent (6n), two tetravalents (4n), and a divalent (2n). An analysis taking into account delayed rediploidization reveals that the octoploid genome composition of Chinese sturgeon results from two rounds of homologous WGDs, and further provides insights into the timing of its ploidy evolution. This study provides the first octoploid genome resource of Acipenseriformes for understanding ploidy compositions and evolutionary trajectories of polyploid fishes.
Subject(s)
Evolution, Molecular , Fishes , Genome , Polyploidy , Whole Genome Sequencing , Animals , Fishes/genetics , Whole Genome Sequencing/methods , Genome/genetics , PhylogenyABSTRACT
Chinese sturgeon Dmrt gene family was identified and characterized for the first time. A total of 5 putative Dmrt genes were identified. The gene structure, conserved protein domain and the phylogenetic relationship of Dmrt gene family were systematically analyzed. The expressed profile of Chinese sturgeon Dmrt genes in gonad, pituitary and hypothalamus in the male and female were investigated. The results indicated that the accumulation of Dmrt genes was involved in different tissues, and the expression profile also differed among each Dmrt genes. ASDmrt1A, ASDmrt2, ASDmrt3, and ASDmrtA1 were highly expressed in the testis in comparison with other tissue. This result showed that ASDmrt1A, ASDmrt2, ASDmrt3, and ASDmrtA1 played an important role in the development of testicle, and may be useful tool in distinguishing between male and female of Chinese sturgeon. Our study will provide a basis for additional analyses of Chinese sturgeon Dmrt genes. This systematic analysis provided a foundation for further functional characterization of Dmrt genes with an aim of study of Chinese sturgeon Dmrt gene family.
Subject(s)
Fishes , Testis , Animals , Male , Female , Phylogeny , Fishes/genetics , Fishes/metabolism , Testis/metabolism , Gonads , GenomeABSTRACT
As an ancient and endangered species unique to the Yangtze River in China, the wild population of the Dabry's sturgeon has become scarce. Due to the long time till the first sexual maturity of Dabry's sturgeon, the population of artificially bred Dabry's sturgeon recovered slowly. As a member of the tachykinin family, TAC1 has been reported to have a variety of functions in mammals such as pain control, smooth muscle contraction and reproductive cycle regulation, but the function of Tac1 in fish has been rarely reported. In this study, we synthesized two tac1 gene products, Substance P (SP) and neurokinin A (NKA), and further verified the effect of two tac1 gene products on the secretion of related hormones in the pituitary of Dabry's Sturgeon by intraperitoneal injection and co-culture of primary cells. Expression studies revealed that the newly cloned tac1 were mainly distributed in the hypothalamus and pituitary tissue of the brain. In prepubertal Dabry's sturgeon, this study showed that the two gonadotropins' mRNA levels in pituitary tissue can be significantly increased by SP and NKA through intraperitoneal injection, and the LH protein level in serum was also increased. Further study showed that both NKA and SP could promote the two gonadotropins' mRNA expression in pituitary cells of Dabry's sturgeon. In addition, we explored the optimal dose and time of SP and NKA on pituitary cells is 24 h and over 10 nM. These results, as a whole, suggested that tac1 gene products play an important role in gonadotropin release and gonadal development in prepubertal Dabry's sturgeon.
ABSTRACT
Non-invasive human-machine interactions (HMIs) are expected to be promoted by epidermal tactile receptive devices that can accurately perceive human activities. In reality, however, the HMI efficiency is limited by the unsatisfactory perception capability of mechanosensors and the complicated techniques for device fabrication and integration. Herein, a paradigm is presented for high-throughput fabrication of multimodal epidermal mechanosensors based on a sequential "femtosecond laser patterning-elastomer infiltration-physical transfer" process. The resilient mechanosensor features a unique hybrid sensing layer of rigid cellular graphitic flakes (CGF)-soft elastomer. The continuous microcracking of CGF under strain enables a sharp reduction in conductive pathways, while the soft elastomer within the framework sustains mechanical robustness of the structure. As a result, the mechanosensor achieves an ultrahigh sensitivity in a broad strain range (GF of 371.4 in the first linear range of 0-50%, and maximum GF of 8922.6 in the range of 61-70%), a low detection limit (0.01%), and a fast response/recovery behavior (2.6/2.1 ms). The device also exhibits excellent sensing performances to multimodal mechanical stimuli, enabling high-fidelity monitoring of full-range human motions. As proof-of-concept demonstrations, multi-pixel mechanosensor arrays are constructed and implemented in a robot hand controlling system and a security system, providing a platform toward efficient HMIs.
Subject(s)
Graphite , Wearable Electronic Devices , Humans , Epidermis , Touch , Motion , Elastomers , Graphite/chemistryABSTRACT
Tachykinins belong to a large, evolutionarily conserved family of brain/gut peptides that are involved in a variety of physiological functions in mammals, such as reproductive regulation. However, little information was available about tachykinins in ancient fish lineage. In the present study, we firstly identified three tachykinin genes (named tac1, tac3 and tac4) and three neurokinin receptors (named nk1r, nk2r and nk3r) from Chinese sturgeon brain and pituitary. Sequence analysis showed that tac1 encoded substance P (SP) and neurokinin A (NKA), tac3 encoded neurokinin B (NKB) and NKB-related peptide (NKBRP), and tac4 encoded hemokin 1 (HK-1) and hemokin 2 (HK-2), respectively. The luciferase reporter assay results showed that NK1R preferentially selected asSP, NK2R preferentially selected asNKA, and NK3R preferentially selected asNKB. Tissue expression analysis showed that the three tac genes were highly detected in the telencephalon and hypothalamus, whereas nkr genes were widely expressed in peripheral tissues. Spatio-temporal expression analysis showed that all three tac genes were highly expressed in unknown sex individuals. Intraperitoneal injection experiments showed that both asSP and asNKB could stimulate luteinizing hormone (LH) release in Chinese sturgeon serum. At the transcriptional level, asSP and asNKB could significantly reduce pituitary follicle-stimulating hormone beta (fshß) mRNA expression, but induce pituitary growth hormone (gh) mRNA expression. In addition, estradiol (E2) could stimulate tac3 mRNA expression in hypothalamus. Taken together, this study provided information on the tachykinin family in Chinese sturgeon and demonstrates that asNKB and asSP could be involved in reproductive and growth regulation in pituitary.
Subject(s)
Pituitary Gland , Tachykinins , Animals , Tachykinins/genetics , Pituitary Gland/metabolism , Luteinizing Hormone/metabolism , Neurokinin B/genetics , Neurokinin B/metabolism , Fishes/genetics , Fishes/metabolism , RNA, Messenger/metabolism , Mammals/geneticsABSTRACT
Fabric-based materials have demonstrated promise for high-performance wearable applications but are currently restricted by their deficient mechanical properties. Here, this work leverages the design freedom offered by additive manufacturing and a novel interlocking pattern to for the first time fabricate a dual-faced chain mail structure consisting of 3D re-entrant unit cells. The flexible structured fabric demonstrates high specific energy absorption and specific strength of up to 1530 J kg-1 and 5900 Nm kg-1 , respectively, together with an excellent recovery ratio of ≈80%, thereby overcoming the strength-recoverability trade-off. The designed dual-faced structured fabric compares favorably against a wide range of materials proposed for wearable applications, attributed to the synergetic strengthening of the energy-absorbing re-entrant unit cells and their unique topological interlocking. This work advocates the combined design of energy-absorbing unit cells and their interlocking to extend the application prospects of fabric-based materials to shape-adaptive protection.
ABSTRACT
The hypothalamus and pituitary serve as important neuroendocrine center, which is able to secrete a variety of neuropeptides and hormones to participate in the regulation of reproduction, growth, stress and feeding in fish. Chinese sturgeon is a basal vertebrate lineage fish with a special evolutionary status, but the information on its neuroendocrine system is relatively scarce. Using the transcriptome data on the hypothalamus-pituitary axis of Chinese sturgeon as reference, we found out 46 hypothalamus neuropeptide genes, which were involved in regulation of reproduction, growth, stress and feeding. The results of sequence alignment showed that the neuroendocrine system of Chinese sturgeon evolves slowly, which confirms that Chinese sturgeon is a species with a slow phenotypic evolution rate. In addition, we also isolated six pituitary hormones genes from Chinese sturgeon, including reproductive hormones: follicle-stimulating homone (FSH) and luteinizing hormone (LH), growth-related hormones: growth hormone (GH)/prolactin (PRL)/somatolactin (SL), and stress-related hormone gene: proopiomelanocortin (POMC). Similar to teleost, immunostaining localization analysis in Chinese sturgeon pituitary showed that LH and FSH were located in the pituitary proximal pars distalis, SL was located in the pituitary rostral pars distalis, and POMC was located in the pituitary pars intermedia and pituitary rostral pars distalis. This study will give a contribution to enrich our information on the neuroendocrine system in Chinese sturgeon.
Subject(s)
Neuropeptides , Pro-Opiomelanocortin , Animals , Pituitary Hormones , Pituitary Gland , Fishes , Growth Hormone , Prolactin , Neuropeptides/genetics , Luteinizing Hormone , Hypothalamus , Follicle Stimulating Hormone , ChinaABSTRACT
Rhodeuscyanorostris Li, Liao & Arai, 2020 is a freshwater fish that is endemic to China and restricted to Chengdu City in Sichuan Province. This study is the first to sequence and characterize the complete mitochondrial genome of R.cyanorostris. The mitogenome of R.cyanorostris is 16580 bp in length, including 13 protein-coding genes, two rRNA genes, 22 tRNA genes, and a control region (D-loop). The base composition of the sequence is 28.5% A, 27.6% C, 26.4% T, and 17.5% G, with a bias toward A+T. The genome structure, nucleotide composition, and codon usage of the mitogenome of R.cyanorostris are consistent with those of other species of Rhodeus. To verify the molecular phylogeny of the genus Rhodeus, we provide new insights to better understand the taxonomic status of R.cyanorostris. The phylogenetic trees present four major clades based on 19 mitogenomic sequences from 16 Rhodeus species. Rhodeuscyanorostris exhibits the closest phylogenetic relationship with R.pseudosericeus, R.amarus, and R.sericeus. This study discloses the complete mitochondrial genome sequence of R.cyanorostris for the first time and provides the most comprehensive phylogenetic reconstruction of the genus Rhodeus based on whole mitochondrial genome sequences. The information obtained in this study will provide new insights for conservation, phylogenetic analysis, and evolutionary biology research.
ABSTRACT
Airflow sensor is a crucial component for monitoring environmental airflow conditions in many engineering fields, especially in the field of aerospace engineering. However, conventional airflow sensors have been suffering from issues such as complexity and bulk in structures, high cost in fabrication and maintenance, and low stability and durability. In this work, we developed a facile direct-writing method for fabricating a low-cost piezoresistive element aiming at high-performance airflow sensing, in which a commercial pen was utilized to drop solutions of single-walled carbon nanotubes onto tissue paper to form a piezoresistive sensing element. The encapsulated piezoresistive element was tested for electromechanical properties under two loading modes: one loading mode is the so-called pressure mode in which the piezoresistive element is pressed by a normal pressure, and another mode is the so-called bending mode in which the piezoresistive element is bended as a cantilever beam. Unlike many other developed airflow sensors among which the sensing elements are normally employed as cantilever beams for facing winds, we designed a fin structure to be incorporated with the piezoresistive element for airflow sensing; the main function of the fin is to face winds instead of the piezoresistive element, and subsequently transfer and enlarge the airflow pressure to the piezoresistive element for the normal pressure loading mode. With this design, the piezoresistive element can also be protected by avoiding experiencing large strains and direct contact with external airflows so that the stability and durability of the sensor can be maintained. Moreover, we experimentally found that the performance parameters of the airflow sensor could be effectively tuned by varying the size of the fin structure. When the fin sizes of the airflow sensors were 20 mm, 30 mm, and 40 mm, the detection limits and sensitivities of the fabricated airflow sensors were measured as 8.2 m/s, 6.2 m/s, 3.2 m/s, 0.0121 (m/s)-2, 0.01657 (m/s)-2, and 0.02264 (m/s)-2, respectively. Therefore, the design of the fin structure could pave an easy way for adjusting the sensor performance without changing the sensor itself toward different application scenarios.
ABSTRACT
Reconstructing of cell architecture plays a vital role in tissue engineering. Recent developments of self-assembling of cells into three-dimensional (3D) matrix pattern using surface acoustic waves have paved a way for a better tissue engineering platform thanks to its unique properties such as nature of noninvasive and noncontact, high biocompatibility, low-power consumption, automation capability, and fast actuation. This article discloses a method to manipulate the orientation and curvature of 3D matrix pattern by redesigning the top wall of microfluidic chamber and the technique to create a 3D longitudinal pattern along preinserted polydimethylsiloxane (PDMS) rods. Experimental results showed a good agreement with model predictions. This research can actively contribute to the development of better organs-on-chips platforms with capability of controlling cell architecture and density. Meanwhile, the 3D longitudinal pattern is suitable for self-assembling of microvasculatures.
Subject(s)
Microfluidics , AcousticsABSTRACT
In this study, we tried to maintain the vitality of Chinese sturgeon (Acipenser sinensis) ova before fertilization with several treatments in vitro. The ovulated eggs were allocated to groups with different incubation medium (coelomic fluid and artificial media), temperature (4°C and 16°C) and storage duration (2 h and 6 h). The maximum fertilization and hatching rate were observed for the control group in which the ova were fertilized immediately after spawning, with the values of 82.45% and 84.73%, respectively. Compared with the control group, the fertilization and hatching rate of all the treatment groups stored at 4°C or in coelomic fluid decreased significantly (P < 0.05). The fertilization rate of the treatment group stored in artificial medium at 16°C did not change obviously in the first 2 h (P > 0.05), but declined dramatically (P < 0.05) after 6 h. In comparison with the control group, no significant (P > 0.05) reduction was shown in hatching rate of the treatment group stored in artificial medium at 16°C for 6 h. The results showed that the ova of Chinese sturgeon can be stored for at least 6 h at 16°C in artificial medium without weakening; this provides a practical application method for the routine hatchery practice of Chinese sturgeon, as well as certain relevant research.
Subject(s)
Fertilization , Fishes , Animals , China , TemperatureABSTRACT
Citrobacter freundii is one of the important bacterial diseases responsible for disease outbreaks to wild and cultured fishes globally. However, no known empirical research has focused on exploring relationships between immune response after C. freundii infection in sturgeons. In this study, C. freundii was isolated and identified from artificially breeding Chinese sturgeon, and global measurement of transcriptome response to C. freundii infection in head-kidney and spleen of A. sinensis were conducted to the acknowledgement of the potential mechanisms of pathogen-host interaction triggered by the bacterial infection. In total, differentially expressed genes which significantly associated with immune responses were found to be participated in antigen processing and presentation (MHC I, MHC II, HspA1, Hsp90A, Hsp70, CTSL, and CTSE), and acute phase response (serotransferrin and CP), as well as changing of other immune-related cytokine, such as chemokine and interferon, which proving their reacting and regulatory role during the response of thehost against C. freundii infection in fish. C. freundii can cause serious disease in sturgeon species was first reported in this study, and innate immune responses to C. freundii infection in this study will be conducive to understand the defense mechanisms and making appropriate prevention strategies in A. sinensis aquaculture operations.
Subject(s)
Citrobacter freundii/physiology , Enterobacteriaceae Infections/immunology , Fish Diseases/immunology , Fish Proteins/genetics , Fishes/immunology , Head Kidney/physiology , Spleen/physiology , Acute-Phase Reaction/genetics , Animals , Antigen Presentation/genetics , Aquaculture , Chemokines/genetics , China , Gene Expression Profiling , Immunity, Innate/genetics , Immunomodulation , Interferons/genetics , TranscriptomeABSTRACT
In this study, the effects of different feeding frequencies on the growth and the expression of genes in the GH/IGF axis were assessed in juvenile Chinese sturgeon. The newly hatched Chinese sturgeons were bred for 38 days at three different feeding frequencies groups (feeding frequency of two times a day, TWD; three times a day, THD; and four times a day, FOD), and the expression levels of the GH/IGF axis responses to feeding frequency were determined by quantitative real-time PCR. In addition, the full-length of the Coding Sequences of IGF I and IGF II genes (489-bp and 660-bp, respectively), were cloned and analyzed from Chinese sturgeon the first time. Multiple sequence alignments of IGFs revealed that Chinese sturgeon are high sequence identity to IGFs from other species. The phylogenetic relationships based on the IGF I and IGF II amino acid sequences were consistent with the traditional classification. After 38 days of growth, the three different feeding frequencies groups of Chinese sturgeon had no significant difference of body length, body weight, specific growth rate, the survival rate, the rate of weight gain and the condition factor. However, the relative expression of Chinese sturgeon GH in the pituitary decreased with increasing feeding frequency. The relative expression of Chinese sturgeon GHR in liver and skeletal muscle was deceased with increasing feeding frequency, while the relative expression of GHR in stomach and intestines at THD group was significantly higher than that of at TWD group and FOD group (p < 0.05). The relative expression of Chinese sturgeon IGF I in liver increased significantly with increasing feeding frequency (p < 0.05). The relative expression of IGF I in stomach and skeletal muscle was similar at the three groups. The relative expression of IGF I in intestines was significantly higher at FOD group than at TWD group and THD group (p < 0.05). The relative expression of Chinese sturgeon IGF II in liver at TWD group was significantly higher than that at THD group and FOD group (p < 0.05). However, the relative expression of IGF II in stomach, intestines and skeletal muscle at THD group was higher than that at TWD group and FOD group. Based on these previous studies that liver IGF I is regarded as a biomarker of growth performance, this result suggested that the juvenile Chinese sturgeon is better for growth when feeding four times daily compared to twice and thrice daily.
Subject(s)
Feeding Behavior , Fishes/physiology , Amino Acid Sequence , Animals , Base Sequence , Fishes/genetics , Gene Expression Regulation , Growth Hormone/genetics , Insulin-Like Growth Factor I/genetics , Insulin-Like Growth Factor II/genetics , Phylogeny , Polymerase Chain Reaction , Sequence AlignmentABSTRACT
Yangtze sturgeon (Acipenser dabryanus) is an endangered endemic freshwater fish of China. Cell-line is a potential means used for long-term preservation of germplasm resources and an ideal in vitro model in place of living organisms for biological studies. Here, culture condition and characterization of fin-derived cell in Yangtze sturgeon were carried out. Tissue explant techniques have been efficiently used in the Yangtze sturgeon caudal fin (YSCF) culture. The YSCF cell line showed a fibroblast-like morphology and stable growth in minimum essential medium eagle's (MEME) supplemented with 10-20% fetal bovine serum at 25°C. Cells were cryopreserved with preservative DMSO in liquid nitrogen and grew normally after recovery. No bacterial, fungal, or mycoplasma contamination was detected in the YSCF cells. Karyotype analysis of the YSCF cells showed that the chromosome numbers of the YSCF ranged from 242 to 273, and the modal chromosome number was identified as 264 at passage 9. The YSCF cells were confirmed from A. dabryanus by assay of 16S rRNA and COI. Furthermore, GFP reporter gene was successfully transferred into YSCF cells and expressed. The established YSCF cell lines will contribute to the preservation of germplasm resources and provide a useful vitro tool for further biological studies in sturgeon species.
Subject(s)
Animal Fins/cytology , Cell Culture Techniques/methods , Cell Line/cytology , Endangered Species , Fishes/metabolism , Animals , Base Sequence , Cell Proliferation , Cell Shape , Chromosomes , Cryopreservation , Genes, Reporter , Green Fluorescent Proteins/metabolism , Karyotype , Metaphase , RNA, Ribosomal, 16S/geneticsABSTRACT
Fabrication of printed electronic devices along with other parts such as supporting structures is a major problem in modern additive fabrication. Solution-based inkjet printing of metal oxide semiconductor usually requires a heat treatment step to facilitate the formation of target material. The employment of external furnace introduces additional complexity in the fabrication scheme, which is supposed to be simplified by the additive manufacturing process. This work presents the fabrication and utilization of micro-heater on the same thermal resistive substrate with the printed precursor pattern to facilitate the formation of zinc oxide (ZnO) semiconductor. The ultraviolet (UV) photodetector fabricated by the proposed scheme was successfully demonstrated. The performance characterization of the printed devices shows that increasing input heating power can effectively improve the electrical properties owing to a better formation of ZnO. The proposed approach using the on-substrate heating element could be useful for the additive manufacturing of functional material by eliminating the necessity of external heating equipment, and it allows in-situ annealing for the printed semiconductor. Hence, the integration of the printed electronic device with printing processes of other materials could be made possible.
ABSTRACT
For passive droplet generation, multiple parameters such as the fluid viscosities and flow rates of the continuous and discrete phases correlate to each other, raising relevant control difficulties. In the current study, a droplet platform that is capable of handling dissimilar liquids is proposed. Through combining oscillatory flow and electric charge, synchronized generation and forced coalescence of different droplets can be achieved. Its application for the separation of E. coli from blood is tested, which leads to a high capture efficiency with less sample and within a shorter time than usual.
ABSTRACT
Chinese sturgeon (Acipenser sinensis) has been listed as a critically endangered species on the IUCN Red List and is an endemic fish of China. Five sets of duplex polymerase chain reactions (PCR) assays were developed with 10 tetranucleotide microsatellites for Chinese sturgeon. The size of CS57, ZHX43, ZHX69, AS105, ZHX51, AS074, ZHX2, AS078, AS026 and AS073 products in 184 Chinese sturgeon individuals ranged from 257-305, 191-241, 251-285, 172-244, 236-260, 169-209, 194-234, 92-176, 165-257 and 120-164, respectively. The observed allele number of the 10 microsatellites ranged from 7 to 16, and the total number of alleles was 106. The number of alleles per individual in CS57, ZHX43, AS105, AS074, AS078 and AS026 was 1-4. The number of alleles per individual in ZHX69, ZHX51, ZHX2 and AS073 was 2-4. The mean number of alleles per locus per individual ranged from 2.01-3.76. The expected heterozygosity (HE), observed heterozygosity (HO), polymorphic information content (PIC) and Shannon-Weiner diversity index (H') ranged from 0.582 to 0.899, from 0.676 to 1, from 0.518 to 0.886 and from 1.034 to 2.34, respectively. Despite many advantages, the use of microsatellites as genetic analysis tools can be limited by the cost of the associated experiment. To solve this problem, this set of five duplex PCRs will provide tools that are more helpful, less expensive and less time consuming than others used for genetic analyses in Chinese sturgeon.
Subject(s)
Fishes/genetics , Genetic Variation , Alleles , Animals , China , Endangered Species , Fishes/growth & development , Microsatellite Repeats/genetics , Polymerase Chain Reaction/methods , TranscriptomeABSTRACT
The sox family is assumed to be responsible for a number of developmental systems. Genome sequencing technology makes it possible to scan sox genes and conduct characteristic analyses of different species. In fish, full characterisation of sox genes at the genome-wide level has been reported for pufferfish Takifugu rubripes, medaka Oryzias latipes, tilapia Oreochromis niloticus and channel catfish Ictalurus punctatus. However, no systematic investigation of the sox family in sturgeons (Acipenseridae) has been reported to date. This study conducted genome-wide identification of the sox genes in the Chinese sturgeon Acipenser sinensis and profiled their tissue distribution between male and female individuals. In total, 19 sox genes were identified, including soxb1, b2, c, d, e, f and h, in the Chinese sturgeon. Genomic structure analysis indicated relatively conserved exon-intron structures in each sox group and phylogenetic analysis supported the previous classification of the sox family. Most of the sox genes showed a tissue-specific expression pattern, indicating the possible involvement of Chinese sturgeon sox genes at different developmental processes such as cardiac and gonadal development. This study provides a comprehensive resource of Chinese sturgeon sox genes and enables a better understanding of the evolution and function of the sox family.
Subject(s)
Fishes/genetics , SOX Transcription Factors/genetics , Animals , Female , Genome , Gonads , Heart , Male , Phylogeny , Real-Time Polymerase Chain Reaction , TranscriptomeABSTRACT
Chinese sturgeon (Acipenser sinensis), a critically endangered Acipenseridae family member, is one of the largest anadromous, native fish in China. Numerous research programmes and protection agencies have focused on breeding and preserving this endangered species. However, available information is limited on the different stages of sex development, especially on the reproductive regulation of the hypothalamus-pituitary-gonad (HPG) axis of A. sinensis. To unravel the mechanism of gene interactions during sex differentiation and gonad development of A. sinensis, we performed transcriptome sequencing using HPG samples from male and female A. sinensis in two developmental stages. In this study, 271.19 Gb high-quality transcriptome data were obtained from 45 samples belonging to 15 individuals (six in stage I, six males and three females in stage II). These transcriptomic data will help us understand the reproductive regulation of the HPG axis in the development stages of A. sinensis and provide important reference data for genomic and genetic studies in A. sinensis and related species.
Subject(s)
Endangered Species , Fishes/physiology , Gene Expression Profiling , Hypothalamo-Hypophyseal System/physiology , Sex Differentiation/genetics , Animals , Female , Fishes/genetics , Genome , Male , TranscriptomeABSTRACT
Photodetectors, which are capable of detecting light with varied wavelength, have nowadays been widely applied onto emerging fields such as security, entertainment, healthcare, environment, and so on. As the one with a two-dimensional layered structure, molybdenum disulfide (MoS2) possesses striking optical and electrical properties that can be used in photodetecting, yet the challenges remain in terms of material processing, device fabrication simplicity, and enhancement of overall photodetection performance. In this work, a photodetectable paper based on a mixture of double-phased MoS2 (1T and 2H) and MoO3 was successfully fabricated through a straightforward route, that is, chemical exfoliation and deposition of MoS2 powder on a flexible cellulose ester membrane, followed by inkjet-printed PEDOT:PSS as electrodes. The obtained device shows varied sensitivity to the light with different wavelengths. Compared with that under green and red lights, the prepared photodetector has the highest internal quantum efficiency (0.063%) and responsivity (0.134 mA W-1), while having longest response/recovery time (17.5/15.3 s) when illuminated with purple light (405 nm). The achieved responsivity is much higher than other reported liquid exfoliation- and solution-derived MoS2 photodetectors. This is ascribed to (1) the enhanced photoelectron generation caused by both MoS2 and MoO3 and (2) the good electric conductivity and efficient charge transport caused by the metallic 1T MoS2. This work demonstrates the feasibility of fabricating the MoS2-based photodetector with excellent performance through a simple exfoliation/filtration and inject printing route, and the detailed study on the response to light with different wavelengths unveils the interaction between the device and the incident light, further broadening the potential applications of such design.