Injectable Radiopaque Hyaluronic Acid Granular Hydrogels for Intervertebral Disc Repair.

Injectable hydrogels offer minimally-invasive treatment options for degenerative disc disease, a prevalent condition affecting millions annually. Many hydrogels explored for intervertebral disc (IVD) repair suffer from weak mechanical integrity, migration issues, and expulsion. To overcome these limitations, an injectable and radiopaque hyaluronic acid granular hydrogel is developed. The granular structure provides easy injectability and low extrusion forces, while the radiopacity enables direct visualization during injection into the disc and non-invasive monitoring after injection. The radiopaque granular hydrogel is injected into rabbit disc explants to investigate restoration of healthy disc mechanics following needle puncture injury ex vivo and then delivered in a minimally-invasive manner into the intradiscal space in a clinically-relevant in vivo large animal goat model of IVD degeneration initiated through degradation by chondroitinase. The radiopaque granular hydrogel successfully halted loss of disc height due to degeneration. Further, the hydrogel not only enhanced proteoglycan content and reduced collagen content in the nucleus pulposus (NP) region compared to degenerative discs, but also helped to maintain the structural integrity of the disc and promote healthy segregation of the NP and annulus fibrosus regions. Overall, this study demonstrates the great potential of an injectable radiopaque granular hydrogel for treatment of degenerative disc disease.

Mechanical crosstalk between the intervertebral disc, facet joints, and vertebral endplate following acute disc injury in a rabbit model.

Background: Vertebral endplate sclerosis and facet osteoarthritis have been documented in animals and humans. However, it is unclear how these adjacent pathologies engage in crosstalk with the intervertebral disc. This study sought to elucidate this crosstalk by assessing each compartment individually in response to acute disc injury. Methods: Eleven New Zealand White rabbits underwent annular disc puncture using a 16G or 21G needle. At 4 and 10 weeks, individual compartments of the motion segment were analyzed. Discs underwent T 1 relaxation mapping with MRI contrast agent gadodiamide as well T 2 mapping. Both discs and facets underwent mechanical testing via vertebra-disc-vertebra tension-compression creep testing and indentation testing, respectively. Endplate bone density was quantified via µCT. Discs and facets were sectioned and stained for histology scoring. Results: Intervertebral discs became more degenerative with increasing needle diameter and time post-puncture. Bone density also increased in endplates adjacent to both 21G and 16G punctured discs leading to reduced gadodiamide transport at 10 weeks. The facet joints, however, did not follow this same trend. Facets adjacent to 16G punctured discs were less degenerative than facets adjacent to 21G punctured discs at 10 weeks. 16G facets were more degenerative at 4 weeks than at 10, suggesting the cartilage had recovered. The formation of severe disc osteophytes in 16G punctured discs between 4 and 10 weeks likely offloaded the facet cartilage, leading to the recovery observed. Conclusions: Overall, this study supports that degeneration spans the whole spinal motion segment following disc injury. Vertebral endplate thickening occurred in response to disc injury, which limited the diffusion of small molecules into the disc. This work also suggests that altered disc mechanics can induce facet degeneration, and that extreme bony remodeling adjacent to the disc may promote facet cartilage recovery through offloading of the articular cartilage.

A Tunable Calcium Phosphate Coating to Drive in vivo Osseointegration of Composite Engineered Tissues.

Varying degrees of hydroxyapatite (HA) surface functionalization have been implicated as the primary driver of differential osteogenesis observed in infiltrating cells. The ability to reliably create spatially controlled areas of mineralization in composite engineered tissues is of growing interest in the field, and the use of HA-functionalized biomaterials may provide a robust solution to this challenge. In this study, we successfully fabricated polycaprolactone salt-leached scaffolds with two levels of a biomimetic calcium phosphate coating to examine their effects on MSC osteogenesis. Longer duration coating in simulated body fluid (SBF) led to increased HA crystal nucleation within scaffold interiors as well as more robust HA crystal formation on scaffold surfaces. Ultimately, the increased surface stiffness of scaffolds coated in SBF for 7 days in comparison to scaffolds coated in SBF for 1 day led to more robust osteogenesis of MSCs in vitro without the assistance of osteogenic signaling molecules. This study also demonstrated that the use of SBF-based HA coatings can promote higher levels of osteogenesis in vivo. Finally, when incorporated as the endplate region of a larger tissue-engineered intervertebral disc replacement, HA coating did not induce mineralization in or promote cell migration out of neighboring biomaterials. Overall, these results verified tunable biomimetic HA coatings as a promising biomaterial modification to promote discrete regions of mineralization within composite engineered tissues.

Level dependent alterations in human facet cartilage mechanics and bone morphometry with spine degeneration.

The zygapophyseal joints of the spine, also known as the facet joints, are paired diarthrodial joints posterior to the intervertebral disc and neural elements. The pathophysiology of facet osteoarthritis (OA), as well as crosstalk between the disc and facets, remains largely understudied compared to disc degeneration. The purpose of this study was to characterize alterations to human facet cartilage and subchondral bone across a spectrum of degeneration and to investigate correlations between disc and facet degeneration. Human lumbar facet articular surfaces from six independent donors were subject to creep indentation mechanical testing to quantify cartilage mechanical properties, followed by microcomputed tomography (µCT) analyses for subchondral bone morphometry. The degenerative state of each articular surface was assessed via macroscopic scoring and via Osteoarthritis Research Society International histopathology scoring. Our data suggest reduced facet cartilage compressive and tensile moduli and increased permeability with increasing degenerative grade, particularly at the lower levels of the spine. µCT analyses revealed spinal level-dependent alterations to the subchondral bone, with an increase in trabecular bone at the L4-L5 level, but a decrease at the upper levels of the lumbar spine with increasing degenerative grade. Cortical bone volume fraction was generally decreased with increasing degenerative grade across spinal levels. Correlation analysis revealed several associations between quantitative measures of disc degeneration and facet OA. This study showed that alterations in the mechanical properties of facet cartilage and in the structural properties of facet subchondral bone correlated with aspects of disc degeneration and were highly dependent on spinal level.

Spatial organization of biochemical cues in 3D-printed scaffolds to guide osteochondral tissue engineering.

Functional repair of osteochondral (OC) tissue remains challenging because the transition from bone to cartilage presents gradients in biochemical and physical properties necessary for joint function. Osteochondral regeneration requires strategies that restore the spatial composition and organization found in the native tissue. Several biomaterial approaches have been developed to guide chondrogenic and osteogenic differentiation of human mesenchymal stem cells (hMSCs). These strategies can be combined with 3D printing, which has emerged as a useful tool to produce tunable, continuous scaffolds functionalized with bioactive cues. However, functionalization often includes one or more post-fabrication processing steps, which can lead to unwanted side effects and often produce biomaterials with homogeneously distributed chemistries. To address these challenges, surface functionalization can be achieved in a single step by solvent-cast 3D printing peptide-functionalized polymers. Peptide-poly(caprolactone) (PCL) conjugates were synthesized bearing hyaluronic acid (HA)-binding (HAbind-PCL) or mineralizing (E3-PCL) peptides, which have been shown to promote hMSC chondrogenesis or osteogenesis, respectively. This 3D printing strategy enables unprecedented control of surface peptide presentation and spatial organization within a continuous construct. Scaffolds presenting both cartilage-promoting and bone-promoting peptides had a synergistic effect that enhanced hMSC chondrogenic and osteogenic differentiation in the absence of differentiation factors compared to scaffolds without peptides or only one peptide. Furthermore, multi-peptide organization significantly influenced hMSC response. Scaffolds presenting HAbind and E3 peptides in discrete opposing zones promoted hMSC osteogenic behavior. In contrast, presenting both peptides homogeneously throughout the scaffolds drove hMSC differentiation towards a mixed population of articular and hypertrophic chondrocytes. These significant results indicated that hMSC behavior was driven by dual-peptide presentation and organization. The downstream potential of this platform is the ability to fabricate biomaterials with spatially controlled biochemical cues to guide functional tissue regeneration without the need for differentiation factors.

Fabricating spatially functionalized 3D-printed scaffolds for osteochondral tissue engineering.

Three-dimensional (3D) printing of biodegradable polymers has rapidly become a popular approach to create scaffolds for tissue engineering. This technique enables fabrication of complex architectures and layer-by-layer spatial control of multiple components with high resolution. The resulting scaffolds can also present distinct chemical groups or bioactive cues on the surface to guide cell behavior. However, surface functionalization often includes one or more post-fabrication processing steps, which typically produce biomaterials with homogeneously distributed chemistries that fail to mimic the biochemical organization found in native tissues. As an alternative, our laboratory developed a novel method that combines solvent-cast 3D printing with peptide-polymer conjugates to spatially present multiple biochemical cues in a single scaffold without requiring post-fabrication modification. Here, we describe a detailed, stepwise protocol to fabricate peptide-functionalized scaffolds and characterize their physical architecture and biochemical spatial organization. We used these 3D-printed scaffolds to direct human mesenchymal stem cell differentiation and osteochondral tissue formation by controlling the spatial presentation of cartilage-promoting and bone-promoting peptides. This protocol also describes how to seed scaffolds and evaluate matrix deposition driven by peptide organization.