ABSTRACT
BACKGROUND: Information on the predictive determinants of abdominal aortic aneurysm rupture from CT angiography are scarce. The aim of this study was to investigate biomechanical parameters in abdominal aortic aneurysms and their association with risk of subsequent rupture. METHODS: In this retrospective study, the digital radiological archive was searched for 363 patients with ruptured abdominal aortic aneurysms. All patients who underwent at least one CT angiography examination before aneurysm rupture were included. CT angiography results were analysed to determine maximum aneurysm diameter, aneurysm volume, and biomechanical parameters (peak wall stress and peak wall rupture index). In the primary survival analysis, patients with abdominal aortic aneurysms less than 70â mm were considered. Sensitivity analyses including control patients and abdominal aortic aneurysms of all sizes were performed. RESULTS: A total of 67 patients who underwent 109 CT angiography examinations before aneurysm rupture were identified. The majority were men (47, 70%) and the median age at the time of CTA examination was 77 (71-83) years. The median maximum aneurysm diameter was 56 (interquartile range 46-65) mm and the median time to rupture was 2.13 (interquartile range 0.64-4.72) years. In univariable analysis, maximum aneurysm diameter, aneurysm volume, peak wall stress, and peak wall rupture index were all associated with risk of rupture. Women had an increased HR for rupture when adjusted for maximum aneurysm diameter or aneurysm volume (HR 2.16, 95% c.i. 1.23 to 3.78 (P = 0.007) and HR 1.92, 95% c.i. 1.06 to 3.50 (P = 0.033) respectively). In multivariable analysis, the peak wall rupture index was associated with risk of rupture. The HR for peak wall rupture index was 1.05 (95% c.i. 1.03 to 1.08) per % (P < 0.001) when adjusted for maximum aneurysm diameter and 1.05 (95% c.i. 1.02 to 1.08) per % (P < 0.001) when adjusted for aneurysm volume. CONCLUSION: Biomechanical factors appear to be important in the prediction of abdominal aortic aneurysm rupture. Women are at increased risk of rupture when adjustments are made for maximum aneurysm diameter alone.
Subject(s)
Aortic Aneurysm, Abdominal , Aortic Rupture , Computed Tomography Angiography , Humans , Aortic Aneurysm, Abdominal/diagnostic imaging , Aortic Aneurysm, Abdominal/complications , Aortic Aneurysm, Abdominal/pathology , Aortic Rupture/etiology , Aortic Rupture/diagnostic imaging , Aged , Retrospective Studies , Female , Male , Aged, 80 and over , Risk Factors , Sex FactorsABSTRACT
The preparation of slender specimens for in-vitro tissue characterisation could potentially alter mechanical tissue properties. To investigate this factor, rectangular specimens were prepared from the wall of the porcine aorta for uniaxial tensile loading. Varying strip widths of 16 mm, 8 mm, and 4 mm were achieved by excising zero, one, and three cuts within the specimen along the loading direction, respectively. While specimens loaded along the vessel's circumferential direction acquired consistent tissue properties, the width of test specimens influenced the results of axially loaded tissue; vascular wall stiffness was reduced by approximately 40% in specimens with strips 4 mm wide. In addition, the cross-loading stretch was strongly influenced by specimen strip width, and fiber sliding contributed to the softening of slender tensile specimens, an outcome from finite element analysis of test specimens. We may, therefore, conclude that cutting orthogonal to the main direction of collagen fibers introduces mechanical trauma that weakens slender tensile specimens, compromising the determination of representative mechanical vessel wall properties.
Subject(s)
Aorta , Swine , Animals , Tensile Strength , Finite Element Analysis , Stress, Mechanical , Biomechanical PhenomenaABSTRACT
The identification of carotid atherosclerotic lesion at risk for plaque rupture, eventually resulting in cerebral embolism and stroke, is of paramount clinical importance. High stress in the fibrous plaque cap has been proposed as risk factor. However, among others, residual strains influence said stress predictions, but quantitative and qualitative implications of residual strains in this context are not well explored. We therefore propose a multiplicative kinematics-based Growth and Remodeling (G&R) framework to predict residual strains from homogenizing tissue stress and then investigate its implication on plaque stress. Carotid vessel morphology of four patients was reconstructed from clinical Computed Tomography-Angiography (CT-A) images and equipped with heterogeneous tissue constitutive properties assigned through a histology-based artificial intelligence image segmentation tool. As compared to a purely elastic analysis and depending on patient-specific morphology and tissue distributions, the incorporation of residual strains reduced the maximum wall stress by up to 30 % and resulted in a fundamentally different distribution of stress across the atherosclerotic wall. Regardless residual strains homogenized tissue stresses, the fibrous plaque cap may persistently be exposed to spots of high stress. In conclusion, the incorporation of residual strains in biomechanical studies of atherosclerotic carotids may be important for a reliable assessment of fibrous plaque cap stress.
Subject(s)
Atherosclerosis , Plaque, Atherosclerotic , Stroke , Humans , Artificial Intelligence , Atherosclerosis/diagnostic imaging , Atherosclerosis/pathology , Carotid Arteries/diagnostic imaging , Carotid Arteries/pathology , Plaque, Atherosclerotic/diagnostic imaging , Plaque, Atherosclerotic/pathology , Stroke/pathology , Fibrosis , Stress, MechanicalABSTRACT
The mechanics of vascular tissue, particularly its fracture properties, are crucial in the onset and progression of vascular diseases. Vascular tissue properties are complex, and the identification of fracture mechanical properties relies on robust and efficient numerical tools. In this study, we propose a parameter identification pipeline to extract tissue properties from force-displacement and digital image correlation (DIC) data. The data has been acquired by symconCT testing porcine aorta wall specimens. Vascular tissue is modelled as a non-linear viscoelastic isotropic solid, and an isotropic cohesive zone model describes tissue fracture. The model closely replicated the experimental observations and identified the fracture energies of 1.57±0.82 kJ m-2 and 0.96±0.34 kJ m-2 for rupturing the porcine aortic media along the circumferential and axial directions, respectively. The identified strength was always below 350 kPa, a value significantly lower than identified through classical protocols, such as simple tension, and sheds new light on the resilience of the aorta. Further refinements to the model, such as considering rate effects in the fracture process zone and tissue anisotropy, could have improved the simulation results. STATEMENT OF SIGNIFICANCE: This paper identified porcine aorta's biomechanical properties using data acquired through a previously developed experimental protocol, the symmetry-constraint compact tension test. An implicit finite element method model mimicked the test, and a two-step approach identified the material's elastic and fracture properties directly from force-displacement curves and digital image correlation-based strain measurements. Our findings show a lower strength of the abdominal aorta as compared to the literature, which may have significant implications for the clinical evaluation of the risk of aortic rupture.
Subject(s)
Aorta, Abdominal , Aortic Rupture , Swine , Animals , Biomechanical Phenomena , Mechanical Phenomena , Computer Simulation , Stress, Mechanical , Finite Element AnalysisABSTRACT
Tissue failure and damage are inherent parts of vascular diseases and tightly linked to clinical events. Additionally, experimental set-ups designed to study classical engineering materials are suboptimal in the exploration of vessel wall fracture properties. The classical Compact Tension (CT) test was augmented to enable stable fracture propagation, resulting in the symmetry-constraint Compact Tension (symconCT) test, a suitable set-up for fracture testing of vascular tissue. The test was combined with Digital Image Correlation (DIC) to study tissue fracture in 45 porcine aorta specimens. Test specimens were loaded in axial and circumferential directions in a physiological solution at 37 °C. Loading the aortic vessel wall in the axial direction resulted in mode I tissue failure and a fracture path aligned with the circumferential vessel direction. Circumferential loading resulted in mode I-dominated failure with multiple deflections of the fracture path. The aorta ruptured at a principal Green-Lagrange strain of approximately 0.7, and strain rate peaks that develop ahead of the crack tip reached nearly 400 times the strain rate on average over the test specimen. It required approximately 70% more external work to fracture the aorta by circumferential than axial load; normalised with the fracture surface, similar energy levels are, however, observed. The symconCT test resulted in a stable fracture propagation, which, combined with DIC, provided a set-up for the in-depth analysis of vascular tissue failure. The high strain rates ahead of the crack tip indicate the significance of rate effects in the constitutive description of vascular tissue fracture. STATEMENT OF SIGNIFICANCE: This paper represents a significant step forward in understanding the fracture properties of porcine aorta. Inspired by the Compact Tension test, we developed an ad hoc experimental protocol to investigate stable crack propagation in soft materials, providing new insights into the mechanical processes that lead to the rupture of vascular tissue. The set-up enables the assessment of strains and strain rates ahead of the crack tip, and our findings could improve the clinical risk assessment of vascular pathologies as well as optimise medical device design.
Subject(s)
Fractures, Bone , Animals , Swine , Stress, Mechanical , Aorta/diagnostic imaging , Materials TestingABSTRACT
Growth of abdominal aortic aneurysms (AAAs) is often described as erratic and discontinuous. This study aimed at describing growth patterns of AAAs with respect to maximal aneurysm diameter (Dmax) and aneurysm volume, and to characterize changes in the intraluminal thrombus (ILT) and biomechanical indices as AAAs grow. 384 computed tomography angiographies (CTAs) from 100 patients (mean age 70.0, standard deviation, SD = 8.5 years, 22 women), who had undergone at least three CTAs, were included. The mean follow-up was 5.2 (SD = 2.5) years. Growth of Dmax was 2.64 mm/year (SD = 1.18), volume 13.73 cm3/year (SD = 10.24) and PWS 7.3 kPa/year (SD = 4.95). For Dmax and volume, individual patients exhibited linear growth in 87% and 77% of cases. In the tertile of patients with the slowest Dmax-growth (< 2.1 mm/year), only 67% belonged to the slowest tertile for volume-growth, and 52% and 55% to the lowest tertile of PWS- and PWRI-increase, respectively. The ILT-ratio (ILT-volume/aneurysm volume) increased with time (2.6%/year, p < 0.001), but when adjusted for volume, the ILT-ratio was inversely associated with biomechanical stress. In contrast to the notion that AAAs grow in an erratic fashion most AAAs displayed continuous and linear growth. Considering only change in Dmax, however, fails to capture the biomechanical risk progression, and parameters such as volume and the ILT-ratio need to be considered.
Subject(s)
Aortic Aneurysm, Abdominal , Humans , Female , Aged , Aortic Aneurysm, Abdominal/diagnostic imaging , Aortic Aneurysm, Abdominal/complications , Tomography, X-Ray Computed , Computed Tomography Angiography , Risk AssessmentABSTRACT
Background: Sac regression after endovascular aneurysm repair (EVAR) of abdominal aortic aneurysms (AAA) is regarded as a marker of successful response to treatment. Several factors influence sac behavior after EVAR, yet little is known about the value of preoperative biomechanics. The aim of this study was to investigate the difference in aortic biomechanics between patients with and without sac regression. Methods: Patients treated with standard EVAR for infrarenal AAA at the Karolinska University Hospital between 2009 and 2012 with one preoperative and a minimum of two postoperative computed tomography angiography (CTA) scans were considered for inclusion in this single-center retrospective cohort study. Biomechanical indices such as AAA wall stress and wall stress-strength ratio as well as intraluminal thrombus (ILT) thickness and stress were measured preoperatively in A4ClinicRE (VASCOPS GmbH). AAA diameter and volume were analyzed on preoperative, 30-day, and 1-year CTAs. Patients were dichotomized based on sac regression, defined as a ≥ 5 mm decrease in maximal AAA diameter between the first two postoperative CTA scans. Multivariable logistic regression was used for analysis of factors associated with early sac regression. Results: Of the 101 patients treated during the inclusion period, 64 were included. Thirty-nine (61%) demonstrated sac regression and 25 (39%) had a stable sac or sac increase. The mean patients age (73 years vs 76 years), male sex (85% vs 96%), and median AAA diameter (58 mm vs 58.5 mm) did not differ between patients with and without sac regression. Although no difference in preoperative biomechanics was seen between the groups, multivariable logistic regression revealed that a larger AAA diameter (odds ratio [OR], 1.27; 95% confidence interval [CI], 1.06-1.51; P = .009) and smoking (OR, 22.1; 95% CI, 2.78-174; P = .003) were positively associated with sac regression. In contrast, the lumen diameter (OR, 0.87; 95% CI, 0.77-0.98; P = .023), ILT thickness (OR, 0.85; 95% CI, 0.75-0.97; P = .013), aspirin or direct-acting oral anticoagulant use (OR, 0.11; 95% CI, 0.02-0.61; P = .012), and mean ILT stress (OR, 0.35; 95% CI, 0.14-0.87; P = .024) showed a negative association. Patients with sac regression had fewer reinterventions (log-rank P = .010) and lower mortality (log-rank P = .012) at the 5-year follow-up. Conclusions: This study, characterizing preoperative biomechanics in patients with and without sac regression, demonstrated a negative association between mean ILT stress and ILT thickness with a change in sac diameter after EVAR. Given that the ILT is a highly dynamic entity, further studies focusing on the role of the thrombus are needed. Furthermore, patients presenting with early sac regression had improved outcomes after EVAR.
ABSTRACT
OBJECTIVE: The aim of this study was to assess whether aortic peak wall stress (PWS) and peak wall rupture index (PWRI) were associated with the risk of abdominal aortic aneurysm (AAA) rupture or repair (defined as AAA events) among participants with small AAAs. METHODS: PWS and PWRI were estimated from computed tomography angiography (CTA) scans of 210 participants with small AAAs (≥ 30 and ≤ 50 mm) prospectively recruited between 2002 and 2016 from two existing databases. Participants were followed for a median of 2.0 (inter-quartile range 1.9, 2.8) years to record the incidence of AAA events. The associations between PWS and PWRI with AAA events were assessed using Cox proportional hazard analyses. The ability of PWS and PWRI to reclassify the risk of AAA events compared to the initial AAA diameter was examined using net reclassification index (NRI) and classification and regression tree (CART) analysis. RESULTS: After adjusting for other risk factors, one standard deviation increase in PWS (hazard ratio, HR, 1.56, 95% confidence intervals, CI 1.19, 2.06; p = 0.001) and PWRI (HR 1.74, 95% CI 1.29, 2.34; p < 0.001) were associated with significantly higher risks of AAA events. In the CART analysis, PWRI was identified as the best single predictor of AAA events at a cut-off value of > 0.562. PWRI, but not PWS, significantly improved the classification of risk of AAA events compared to the initial AAA diameter alone. CONCLUSION: PWS and PWRI predicted the risk of AAA events but only PWRI significantly improved the risk stratification compared to aortic diameter alone. KEY POINTS: ⢠Aortic diameter is an imperfect measure of abdominal aortic aneurysm (AAA) rupture risk. ⢠This observational study of 210 participants found that peak wall stress (PWS) and peak wall rupture index (PWRI) predicted the risk of aortic rupture or AAA repair. ⢠PWRI, but not PWS, significantly improved the risk stratification for AAA events compared to aortic diameter alone.
Subject(s)
Aortic Aneurysm, Abdominal , Humans , Risk Assessment , Aortography/methods , Stress, Mechanical , Finite Element Analysis , Retrospective Studies , Aortic Aneurysm, Abdominal/complications , Aortic Aneurysm, Abdominal/diagnostic imaging , Aortic Aneurysm, Abdominal/epidemiology , Risk Factors , Aorta, Abdominal/diagnostic imagingABSTRACT
Abdominal aortic aneurysm (AAA) disease, the local enlargement of the infrarenal aorta, is a serious condition that causes many deaths, especially in men exceeding 65 years of age. Over the past quarter of a century, computational biomechanical models have been developed towards the assessment of AAA risk of rupture, technology that is now on the verge of being integrated within the clinical decision-making process. The modeling of AAA requires a holistic understanding of the clinical problem, in order to set appropriate modeling assumptions and to draw sound conclusions from the simulation results. In this article we summarize and critically discuss the proposed modeling approaches and report the outcome of clinical validation studies for a number of biomechanics-based rupture risk indices. Whilst most of the aspects concerning computational mechanics have already been settled, it is the exploration of the failure properties of the AAA wall and the acquisition of robust input data for simulations that has the greatest potential for the further improvement of this technology.
Subject(s)
Aortic Aneurysm, Abdominal , Aortic Rupture , Male , Humans , Clinical Relevance , Risk Assessment , Aorta, Abdominal , Biomechanical Phenomena , Stress, Mechanical , Models, CardiovascularABSTRACT
Intimal calcification and vascular stiffening are predominant features of end-stage atherosclerosis. However, their role in atherosclerotic plaque instability and how the extent and spatial distribution of calcification influence plaque biology remain unclear. We recently showed that extensive macro calcification can be a stabilizing feature of late-stage human lesions, associated with a reacquisition of more differentiated properties of plaque smooth muscle cells (SMCs) and extracellular matrix (ECM) remodeling. Here, we hypothesized that biomechanical forces related to macro-calcification within plaques influence SMC phenotype and contribute to plaque stabilization. We generated a finite element modeling (FEM) pipeline to assess plaque tissue stretch based on image analysis of preoperative computed tomography angiography (CTA) of carotid atherosclerotic plaques to visualize calcification and soft tissues (lipids and extracellular matrix) within the lesions. Biomechanical stretch was significantly reduced in tissues in close proximity to macro calcification, while increased levels were observed within distant soft tissues. Applying this data to an in vitro stretch model on primary vascular SMCs revealed upregulation of typical markers for differentiated SMCs and contractility under low stretch conditions but also impeded SMC alignment. In contrast, high stretch conditions in combination with calcifying conditions induced SMC apoptosis. Our findings suggest that the load bearing capacities of macro calcifications influence SMC differentiation and survival and contribute to atherosclerotic plaque stabilization.
Subject(s)
Calcinosis , Carotid Artery Diseases , Plaque, Atherosclerotic , Humans , Plaque, Atherosclerotic/pathology , Myocytes, Smooth Muscle/pathology , Carotid Artery Diseases/diagnostic imaging , Calcinosis/pathology , Phenotype , LipidsABSTRACT
BACKGROUND: Rupture of unstable atherosclerotic plaques with a large lipid-rich necrotic core and a thin fibrous cap cause myocardial infarction and stroke. Yet it has not been possible to assess this for individual patients. Clinical guidelines still rely on use of luminal narrowing, a poor indicator but one that persists for lack of effective means to do better. We present a case study demonstrating the assessment of biomechanical indices pertaining to plaque rupture risk non-invasively for individual patients enabled by histologically validated tissue characterization. METHODS: Routinely acquired clinical images of plaques were analyzed to characterize vascular wall tissues using software validated by histology (ElucidVivo, Elucid Bioimaging Inc.). Based on the tissue distribution, wall stress and strain were then calculated at spatial locations with varied fibrous cap thicknesses at diastolic, mean and systolic blood pressures. RESULTS: The von Mises stress of 152 [131, 172] kPa and the equivalent strain of 0.10 [0.08, 0.12] were calculated where the fibrous cap thickness was smallest (560 µm) (95% CI in brackets). The stress at this location was at a level predictive of plaque failure. Stress and strain at locations with larger cap thicknesses were calculated to be lower, demonstrating a clinically relevant range of risk levels. CONCLUSION: Patient specific tissue characterization can identify distributions of stress and strain in a clinically relevant range. This capability may be used to identify high-risk lesions and personalize treatment decisions for individual patients with cardiovascular disease and improve prevention of myocardial infarction and stroke.
Subject(s)
Myocardial Infarction , Plaque, Atherosclerotic , Stroke , Computed Tomography Angiography , Fibrosis , Humans , Myocardial Infarction/diagnostic imaging , Plaque, Atherosclerotic/diagnostic imaging , Plaque, Atherosclerotic/pathology , Stroke/diagnostic imagingABSTRACT
OBJECTIVE: This study was an unplanned exploratory analysis of a subset of participants from the Telmisartan in the Management of Abdominal Aortic Aneurysm (TEDY) trial. It aimed to assess the efficacy of the angiotensin 1 receptor blocker telmisartan in reducing abdominal aortic aneurysm (AAA) peak wall stress (PWS) and peak wall rupture index (PWRI) among individuals with small AAAs. METHODS: Participants with AAAs measuring 35 - 49 mm in maximum diameter were randomised to receive telmisartan 40 mg or identical placebo in the TEDY trial. Participants who had computed tomography angiography performed at entry and at least one other time point during the trial (12 or 24 months) were included in the current study. Orthogonal AAA diameter, PWS, and PWRI were measured using previously validated methods. The annual change in PWS and PWRI from baseline was compared between participants allocated telmisartan or placebo using linear mixed effects models. These models were either unadjusted or adjusted for risk factors that were different in the groups at entry (p < .100) or systolic blood pressure (SBP) at one year. RESULTS: Of the 207 participants recruited to TEDY, 124 were eligible for inclusion in this study. This study included 65 and 59 participants from the telmisartan and placebo groups, respectively. The PWS and PWRI were not significantly different in the two groups at baseline. Participants allocated telmisartan had a slower annual increase in PWS (-4.19; 95% CI -8.24, -0.14 kPa/year; p = .043) and PWRI (-0.014; 95% CI -0.026, -0.001; p = .032) compared with those allocated placebo after adjusting for risk factors. After adjustment for SBP at one year, telmisartan did not significantly reduce annual increases in PWS or PWRI. CONCLUSION: The findings of this study suggest that telmisartan limits the rate of increase in PWS and PWRI of small AAAs by reducing blood pressure.
Subject(s)
Aortic Aneurysm, Abdominal , Aortic Rupture , Humans , Aortic Aneurysm, Abdominal/diagnostic imaging , Aortic Aneurysm, Abdominal/drug therapy , Aortic Aneurysm, Abdominal/complications , Aortic Rupture/etiology , Telmisartan/therapeutic use , Aortography/methods , Risk Assessment , Stress, Mechanical , Finite Element Analysis , Aorta, Abdominal/diagnostic imagingABSTRACT
It remains difficult to predict when which patients with abdominal aortic aneurysm (AAA) will require surgery. The aim was to study the accuracy of geometric and biomechanical analysis of small AAAs to predict reaching the threshold for surgery, diameter growth rate and rupture or symptomatic aneurysm. 189 patients with AAAs of diameters 40-50 mm were included, 161 had undergone two CTAs. Geometric and biomechanical variables were used in prediction modelling. Classifications were evaluated with area under receiver operating characteristic curve (AUC) and regressions with correlation between observed and predicted growth rates. Compared with the baseline clinical diameter, geometric-biomechanical analysis improved prediction of reaching surgical threshold within four years (AUC 0.80 vs 0.85, p = 0.031) and prediction of diameter growth rate (r = 0.17 vs r = 0.38, p = 0.0031), mainly due to the addition of semiautomatic diameter measurements. There was a trend towards increased precision of volume growth rate prediction (r = 0.37 vs r = 0.45, p = 0.081). Lumen diameter and biomechanical indices were the only variables that could predict future rupture or symptomatic AAA (AUCs 0.65-0.67). Enhanced precision of diameter measurements improves the prediction of reaching the surgical threshold and diameter growth rate, while lumen diameter and biomechanical analysis predicts rupture or symptomatic AAA.
Subject(s)
Aorta, Abdominal/pathology , Aortic Aneurysm, Abdominal/diagnosis , Aortic Rupture/diagnosis , Biomechanical Phenomena , Machine Learning , Models, Cardiovascular , Algorithms , Aorta, Abdominal/diagnostic imaging , Aortic Aneurysm, Abdominal/surgery , Aortic Rupture/surgery , Area Under Curve , Clinical Decision-Making , Computed Tomography Angiography , Disease Management , Humans , Prognosis , ROC Curve , Tomography, X-Ray ComputedABSTRACT
Over the last decades, climate science has evolved rapidly across multiple expert domains. Our best tools to capture state-of-the-art knowledge in an internally self-consistent modeling framework are the increasingly complex fully coupled Earth System Models (ESMs). However, computational limitations and the structural rigidity of ESMs mean that the full range of uncertainties across multiple domains are difficult to capture with ESMs alone. The tools of choice are instead more computationally efficient reduced complexity models (RCMs), which are structurally flexible and can span the response dynamics across a range of domain-specific models and ESM experiments. Here we present Phase 2 of the Reduced Complexity Model Intercomparison Project (RCMIP Phase 2), the first comprehensive intercomparison of RCMs that are probabilistically calibrated with key benchmark ranges from specialized research communities. Unsurprisingly, but crucially, we find that models which have been constrained to reflect the key benchmarks better reflect the key benchmarks. Under the low-emissions SSP1-1.9 scenario, across the RCMs, median peak warming projections range from 1.3 to 1.7°C (relative to 1850-1900, using an observationally based historical warming estimate of 0.8°C between 1850-1900 and 1995-2014). Further developing methodologies to constrain these projection uncertainties seems paramount given the international community's goal to contain warming to below 1.5°C above preindustrial in the long-term. Our findings suggest that users of RCMs should carefully evaluate their RCM, specifically its skill against key benchmarks and consider the need to include projections benchmarks either from ESM results or other assessments to reduce divergence in future projections.
ABSTRACT
BACKGROUND: Previous studies have suggested that finite element analysis (FEA) can estimate the rupture risk of an abdominal aortic aneurysm (AAA); however, the value of biomechanical estimates over measurement of AAA diameter alone remains unclear. This study aimed to compare peak wall stress (PWS) and peak wall rupture index (PWRI) in participants with ruptured and asymptomatic intact AAAs. METHODS: The reproducibility of semiautomated methods for estimating aortic PWS and PWRI from CT images was assessed. PWS and PWRI were estimated in people with ruptured AAAs and those with asymptomatic intact AAAs matched by orthogonal diameter on a 1 : 2 basis. Spearman's correlation coefficient was used to assess the association between PWS or PWRI and AAA diameter. Independent associations between PWS or PWRI and AAA rupture were identified by means of logistic regression analyses. RESULTS: Twenty individuals were included in the analysis of reproducibility. The main analysis included 50 patients with an intact AAA and 25 with a ruptured AAA. Median orthogonal diameter was similar in ruptured and intact AAAs (82·3 (i.q.r. 73·5-92·0) versus 81·0 (73·2-92·4) mm respectively; P = 0·906). Median PWS values were 286·8 (220·2-329·6) and 245·8 (215·2-302·3) kPa respectively (P = 0·192). There was no significant difference in PWRI between the two groups (P = 0·982). PWS and PWRI correlated positively with orthogonal diameter (both P < 0·001). Participants with high PWS, but not PWRI, were more likely to have a ruptured AAA after adjusting for potential confounders (odds ratio 5·84, 95 per cent c.i. 1·22 to 27·95; P = 0·027). This association was not maintained in all sensitivity analyses. CONCLUSION: High aortic PWS had an inconsistent association with greater odds of aneurysm rupture in patients with a large AAA.
Subject(s)
Aortic Aneurysm, Abdominal/complications , Aortic Rupture/etiology , Aged , Aorta, Abdominal/physiopathology , Aortic Aneurysm, Abdominal/pathology , Aortic Aneurysm, Abdominal/physiopathology , Aortic Rupture/diagnosis , Aortic Rupture/pathology , Aortic Rupture/physiopathology , Asymptomatic Diseases , Case-Control Studies , Female , Finite Element Analysis , Humans , Male , Retrospective Studies , Risk FactorsABSTRACT
Background Prior studies have suggested aortic peak wall stress (PWS) and peak wall rupture index (PWRI) can estimate the rupture risk of an abdominal aortic aneurysm (AAA), but whether these measurements have independent predictive ability over assessing AAA diameter alone is unclear. The aim of this systematic review was to compare PWS and PWRI in participants with ruptured and asymptomatic intact AAAs of similar diameter. Methods and Results Web of Science, Scopus, Medline, and The Cochrane Library were systematically searched to identify studies assessing PWS and PWRI in ruptured and asymptomatic intact AAAs of similar diameter. Random-effects meta-analyses were performed using inverse variance-weighted methods. Leave-one-out sensitivity analyses were conducted to assess the robustness of findings. Risk of bias was assessed using a modification of the Newcastle-Ottawa scale and standard quality assessment criteria for evaluating primary research papers. Seven case-control studies involving 309 participants were included. Meta-analyses suggested that PWRI (standardized mean difference, 0.42; 95% CI, 0.14-0.70; P=0.004) but not PWS (standardized mean difference, 0.13; 95% CI, -0.18 to 0.44; P=0.418) was greater in ruptured than intact AAAs. Sensitivity analyses suggested that the findings were not dependent on the inclusion of any single study. The included studies were assessed to have a medium to high risk of bias. Conclusions Based on limited evidence, this study suggested that PWRI, but not PWS, is greater in ruptured than asymptomatic intact AAAs of similar maximum aortic diameter.
Subject(s)
Aorta, Abdominal/physiopathology , Aortic Aneurysm, Abdominal/physiopathology , Aortic Rupture/physiopathology , Asymptomatic Diseases , Aorta, Abdominal/diagnostic imaging , Aortic Aneurysm, Abdominal/complications , Aortic Aneurysm, Abdominal/diagnosis , Aortic Rupture/diagnosis , Aortic Rupture/etiology , Aortography/methods , Biomechanical Phenomena , HumansABSTRACT
[Figure: see text].
Subject(s)
Artificial Intelligence , Computed Tomography Angiography , Coronary Angiography , Coronary Artery Disease/diagnostic imaging , Coronary Artery Disease/genetics , Coronary Vessels/diagnostic imaging , Gene Expression Profiling , Plaque, Atherosclerotic , Radiographic Image Interpretation, Computer-Assisted , Transcriptome , Aged , Coronary Artery Disease/pathology , Coronary Vessels/pathology , Feasibility Studies , Female , Humans , Male , Models, Genetic , Oligonucleotide Array Sequence Analysis , Phenotype , Pilot Projects , Predictive Value of TestsABSTRACT
Clinical results obtained when degradable polymer-based medical devices are used in breast reconstruction following mastectomy are promising. However, it remains challenging to develop a large scaffold structure capable of providing both sufficient external mechanical support and an internal cell-like environment to support breast tissue regeneration. We propose an internal-bra-like prototype to solve both challenges. The design combines a 3D-printed scaffold with knitted meshes and electrospun nanofibers and has properties suitable for both breast tissue regeneration and support of a silicone implant. Finite element analysis (FEA) was used to predict the macroscopic and microscopic stiffnesses of the proposed structure. The simulations show that introduction of the mesh leads to a macroscopic scaffold stiffness similar to the stiffness of breast tissue, and mechanical testing confirms that the introduction of more layers of mesh in the modular design results in a lower elastic modulus. The compressive modulus of the scaffold can be tailored within a range from hundreds of kPa to tens of kPa. Biaxial tensile testing reveals stiffening with increasing strain and indicates that rapid strain-induced softening occurs only within the first loading cycle. In addition, the microscopic local stiffness obtained from FEA simulations indicates that cells experience significant heterogeneous mechanical stimuli at different places in the scaffold and that the local mechanical stimulus generated by the strand surface is controlled by the elastic modulus of the polymer, rather than by the scaffold architecture. From in vitro experiments, it was observed that the addition of knitted mesh and an electrospun nanofiber layer to the scaffold significantly increased cell seeding efficiency, cell attachment, and proliferation compared to the 3D-printed scaffold alone. In summary, our results suggest that the proposed design strategy is promising for soft tissue engineering of scaffolds to assist breast reconstruction and regeneration.
ABSTRACT
Hip fractures are a major health problem with high socio-economic costs. Subject-specific finite element (FE) models have been suggested to improve the fracture risk assessment, as compared to clinical tools based on areal bone mineral density, by adding an estimate of bone strength. Typically, such FE models are limited to estimate bone strength and possibly the fracture onset, but do not model the fracture process itself. The aim of this study was to use a discrete damage approach to simulate the full fracture process in subject-specific femur models under stance loading conditions. A framework based on the partition of unity finite element method (PUFEM), also known as XFEM, was used. An existing PUFEM framework previously used on a homogeneous generic femur model was extended to include a heterogeneous material description together with a strain-based criterion for crack initiation. The model was tested on two femurs, previously mechanically tested in vitro. Our results illustrate the importance of implementing a subject-specific material distribution to capture the experimental fracture pattern under stance loading. Our models accurately predicted the fracture pattern and bone strength (1% and 5% error) in both investigated femurs. This is the first study to simulate complete fracture paths in subject-specific FE femur models and it demonstrated how discrete damage models can provide a more complete picture of fracture risk by considering both bone strength and fracture toughness in a subject-specific fashion.