ABSTRACT
Colloidal gelation phase diagram has been traditionally characterized using three key factors: particle volume fraction, strength of attraction, and range of attraction. While there's a rich body of literature on the role of attraction strength and particle volume fraction, majority of studies have been limited to short range interactions. Using Brownian dynamics simulations, we explored the effect that the range of attractions has on the microstructure and dynamics of both weakly and strongly attractive colloidal systems. Although gelation occurs significantly faster at high attraction strength, by an order of magnitude compared to low strength, we did not observe any clear trend in gelation-rate with respect to a change in the range of interaction. However, as the attraction range increases in both systems, the final structure undergoes a transition from a single connected network to a fluid of dense clusters. This results in a new gelation phase boundary for long range attractive colloids.
ABSTRACT
Colloidal gels typically exhibit mechanical properties akin to a viscoelastic solid, influenced by their underlying particulate network. Hence, the structural and morphological characteristics of the colloidal network have a significant effect on the rigidity of the gel. In this study, we show how seemingly small variations in the particle-level interactions throughout the system result in larger scale structural heterogeneities. While the microscale particle level descriptors of the colloidal network remain largely unaffected by heterogeneous interactions, larger scale properties of a colloidal gel change appreciably. The overall cluster-level mesostructure of a colloidal gel is found to be sensitive to the small variations in the interaction potential at the particle level.
ABSTRACT
One of the defining characteristics of soft glassy materials is their ability to exhibit a yield stress, which can result in an overall elasto-visco-plastic mechanics. To design soft materials with specific properties, it is essential to gain a comprehensive understanding of the topological and structural failure points that occur during yielding. However, predicting these failure points, which lead to yielding, is challenging due to the dynamic nature of structure development and its cooccurrence with other complicated processes, such as local rearrangements and anisotropy. In this study, we employ a series of tools from network science to investigate colloidal gels as a model for soft glassy materials during yielding. Our findings reveal that edge betweenness centrality can be utilized as a universal predictor for yielding across various state variables, including the volume fraction of solids, the strength, and the range of attraction between colloids.
ABSTRACT
Colloidal gels exhibit solid-like behavior at vanishingly small fractions of solids, owing to ramified space-spanning networks that form due to particle-particle interactions. These networks give the gel its rigidity, and with stronger attractions the elasticity grows as well. The emergence of rigidity can be described through a mean field approach; nonetheless, fundamental understanding of how rigidity varies in gels of different attractions is lacking. Moreover, recovering an accurate gelation phase diagram based on the system's variables has been an extremely challenging task. Understanding the nature of colloidal clusters, and how rigidity emerges from their connections is key to controlling and designing gels with desirable properties. Here, we employ network analysis tools to interrogate and characterize the colloidal structures. We construct a particle-level network, having all the spatial coordinates of colloids with different attraction levels, and also identify polydisperse rigid fractal clusters using a Gaussian mixture model, to form a coarse-grained cluster network that distinctly shows main physical features of the colloidal gels. A simple mass-spring model then is used to recover quantitatively the elasticity of colloidal gels from these cluster networks. Interrogating the resilience of these gel networks shows that the elasticity of a gel (a dynamic property) is directly correlated to its cluster network's resilience (a static measure). Finally, we use the resilience investigations to devise [and experimentally validate] a fully resolved phase diagram for colloidal gelation, with a clear solid-liquid phase boundary using a single volume fraction of particles well beyond this phase boundary.
ABSTRACT
The ability to concisely describe the dynamical behavior of soft materials through closed-form constitutive relations holds the key to accelerated and informed design of materials and processes. The conventional approach is to construct constitutive relations through simplifying assumptions and approximating the time- and rate-dependent stress response of a complex fluid to an imposed deformation. While traditional frameworks have been foundational to our current understanding of soft materials, they often face a twofold existential limitation: i) Constructed on ideal and generalized assumptions, precise recovery of material-specific details is usually serendipitous, if possible, and ii) inherent biases that are involved by making those assumptions commonly come at the cost of new physical insight. This work introduces an approach by leveraging recent advances in scientific machine learning methodologies to discover the governing constitutive equation from experimental data for complex fluids. Our rheology-informed neural network framework is found capable of learning the hidden rheology of a complex fluid through a limited number of experiments. This is followed by construction of an unbiased material-specific constitutive relation that accurately describes a wide range of bulk dynamical behavior of the material. While extremely efficient in closed-form model discovery for a real-world complex system, the model also provides insight into the underpinning physics of the material.
ABSTRACT
Yielding of the particulate network in colloidal gels under applied deformation is accompanied by various microstructural changes, including rearrangement, bond rupture, anisotropy, and reformation of secondary structures. While much work has been done to understand the physical underpinnings of yielding in colloidal gels, its topological origins remain poorly understood. Here, employing a series of tools from network science, we characterize the bonds using their orientation and network centrality. We find that bonds with higher centralities in the network are ruptured the most at all applied deformation rates. This suggests that a network analysis of the particulate structure can be used to predict the failure points in colloidal gels a priori.
Subject(s)
Gels , Gels/chemistryABSTRACT
Single ventricle hearts have only one ventricle that can pump blood effectively and the treatment requires three stages of operations to reconfigure the heart and circulatory system. At the second stage, Glenn procedure is performed to connect superior vena cava (SVC) to the pulmonary arteries (PA). For the third and most complex operation, called Fontan, an extracardiac conduit is used to connect inferior vena cava (IVC) to the PL and thereafter no deoxygenated blood goes to the heart. Predicting Hemodynamic Performance of Fontan Operation using computational fluid dynamics (CFD) is hypothesized to improve outcomes and optimize this treatment planning in children with single-ventricle heart disease. An important reason for this surgical planning is to reduce the development of pulmonary arteriovenous malformations (PAVM) and the need to perform Fontan revisions. The purpose of this study was to develop amodel for Fontan surgical planning and use this model to compare blood circulation in two designed graft types of Fontan operation known as T-shape and Y-graft. The functionality of grafts was compared in terms of power loss (PL) and hepatic flow distribution (HFD), a known factor in PAVM development. To perform this study, ten single-ventricle children with Glenn physiology were included and a CFD model was developed to estimate the blood flow circulation to the left and right pulmonary arteries. The estimated blood flow by CFD was compared with that measured by cardiovascular magnetic resonance. Results showed that there was an excellent agreement between the net blood flow in the right and left pulmonary arteries computed by CFD and CMR (ICC= 0.98, P-value ≥0.21). After validating the accuracy of each CFD model, Fontan operations using T-shape and Y-graft conduits were performed in silico for each patient and the developed CFD model was used to predict the post-surgical PL and HFD. We found that the PL in the Y-graft was significantly lower than in the T-shape (P-value ≤0.001) and HFD was significantly better balanced in Y-graft compared to the T-shape (P-value=0.004).
ABSTRACT
Dense suspensions can exhibit shear thickening in response to large deformation. A consensus has emerged over the past few years on the formation of force networks, that span the entire system size, that lead to increased resistance to motion. Nonetheless, the characteristics of these networks are to a large extent poorly understood. Here, force networks formed in continuous and discontinuous shear thickening dense suspensions (CST and DST, respectively) are studied. We first show the evolution of the network formation and its topological heterogeneities as the applied stress increases. Subsequently, we identify force communities and coarse grain the suspension into a cluster network, and show that cluster-level dynamics are responsible for stark differences between the CST and DST behavior. Our results suggest that the force clusters formed in the DST regime are considerably more constrained in their motion, while CST clusters are loosely connected to their surrounding clusters.
ABSTRACT
Microthrombi and circulating cell clusters are common microscopic findings in patients with coronavirus disease 2019 (COVID-19) at different stages in the disease course, implying that they may function as the primary drivers in disease progression. Inspired by a recent flow imaging cytometry study of the blood samples from patients with COVID-19, we perform computational simulations to investigate the dynamics of different types of circulating cell clusters, namely white blood cell (WBC) clusters, platelet clusters, and red blood cell clusters, over a range of shear flows and quantify their impact on the viscosity of the blood. Our simulation results indicate that the increased level of fibrinogen in patients with COVID-19 can promote the formation of red blood cell clusters at relatively low shear rates, thereby elevating the blood viscosity, a mechanism that also leads to an increase in viscosity in other blood diseases, such as sickle cell disease and type 2 diabetes mellitus. We further discover that the presence of WBC clusters could also aggravate the abnormalities of local blood rheology. In particular, the extent of elevation of the local blood viscosity is enlarged as the size of the WBC clusters grows. On the other hand, the impact of platelet clusters on the local rheology is found to be negligible, which is likely due to the smaller size of the platelets. The difference in the impact of WBC and platelet clusters on local hemorheology provides a compelling explanation for the clinical finding that the number of WBC clusters is significantly correlated with thrombotic events in COVID-19 whereas platelet clusters are not. Overall, our study demonstrates that our computational models based on dissipative particle dynamics can serve as a powerful tool to conduct quantitative investigation of the mechanism causing the pathological alterations of hemorheology and explore their connections to the clinical manifestations in COVID-19.
Subject(s)
COVID-19 , Blood Viscosity , COVID-19/blood , Fibrinogen/metabolism , Hemorheology , HumansABSTRACT
Molecular assembly processes are generally driven by thermodynamic properties in solutions. Atomistic modeling can be very helpful in designing and understanding complex systems, except that bulk solvent is very inefficient to treat explicitly as discrete molecules. In this work, we develop and assess two multiscale solvation models for computing solvation thermodynamic properties. The new SLIC/CDC model combines continuum solvent electrostatics based on the solvent layer interface condition (SLIC) with new statistical thermodynamic models for hydrogen bonding and nonpolar modes: cavity formation, dispersion interactions, combinatorial mixing (CDC). Given the structures of 500 solutes, the SLIC/CDC model predicts Gibbs energies of solvation in water with an average accuracy better than 1 kcal/mol, when compared to experimental measurements, and better than 0.8 kcal/mol, when compared to explicit-solvent molecular dynamics simulations. The individual SLIC/CDC energy mode values agree quantitatively with those computed from explicit-solvent molecular dynamics. The previously published SLIC/SASA multiscale model combines the SLIC continuum electrostatic model with the solvent-accessible surface area (SASA) nonpolar energy mode. With our new, improved parametrization method, the SLIC/SASA model now predicts Gibbs energies of solvation with better than 1.4 kcal/mol average accuracy in aqueous systems, compared to experimental and explicit-solvent molecular dynamics, and better than 1.6 kcal/mol average accuracy in ionic liquids, compared to explicit-solvent molecular dynamics. Both models predict solvation entropies, and are the first implicit-solvation models capable of predicting solvation heat capacities.
Subject(s)
Ionic Liquids , Solutions , Solvents/chemistry , Thermodynamics , Water/chemistryABSTRACT
SignificanceScience-based data-driven methods that can describe the rheological behavior of complex fluids can be transformative across many disciplines. Digital rheometer twins, which are developed here, can significantly reduce the cost, time, and energy required to characterize complex fluids and predict their future behavior. This is made possible by combining two different methods of informing neural networks with the rheological underpinnings of a system, resulting in quantitative recovery of a gel's response to different flow protocols. The platform developed here is general enough that it can be extended to areas well beyond complex fluids modeling.
ABSTRACT
Hemorheology is known to be a major diagnostic tool for many blood-altering diseases. While hemorheological measures of blood, such as the general flow curve, shear-thinning behavior, and its yield stress, are much more studied in detail, thixotropic behavior and thermokinematic memory formation in blood are less understood. Here, we study the thermokinematic memory formation in blood, resulting in a clear sensitivity to the flow history, i.e., thixotropic behavior. We also measure the thixotropic timescale for blood flow using a well-defined flow protocol. Employing a series of in silico flow loops in which the blood is subject to a sweep down/up flow, we measure and discuss the dependence of the thixotropic timescale to the concentration of fibrinogen in the plasma as the main driver of structural evolution under flow.
Subject(s)
RheologyABSTRACT
Calculating the magnetic interaction between magnetic particles that are positioned in close proximity to one another is a surprisingly challenging task. Exact solutions for this interaction exist either through numerical expansion of multipolar interactions or through solving Maxwell's equations with a finite element solver. These approaches can take hours for simple configurations of three particles. Meanwhile, across a range of scientific and engineering problems, machine learning approaches have been developed as fast computational platforms for solving complex systems of interest when large data sets are available. In this paper, we bring the touted benefits of recent advances in science-based machine learning algorithms to bear on the problem of modeling the magnetic interaction between three particles. We investigate this approach using diverse machine learning systems including physics informed neural networks. We find that once the training data has been collected and the model has been initiated, simulation times are reduced from hours to mere seconds while maintaining remarkable accuracy. Despite this promise, we also try to lay bare the current challenges of applying machine learning to these and more complex colloidal systems.
Subject(s)
Machine Learning , Neural Networks, Computer , Algorithms , Computer Simulation , Magnetic PhenomenaABSTRACT
Time- and rate-dependent material functions in non-Newtonian fluids in response to different deformation fields pose a challenge in integrating different constitutive models into conventional computational fluid dynamic platforms. Considering their relevance in many industrial and natural settings alike, robust data-driven frameworks that enable accurate modeling of these complex fluids are of great interest. The main goal is to solve the coupled Partial Differential Equations (PDEs) consisting of the constitutive equations that relate the shear stress to the deformation and fully capture the behavior of the fluid under various flow protocols with different boundary conditions. In this work, we present non-Newtonian physics-informed neural networks (nn-PINNs) for solving systems of coupled PDEs adopted for complex fluid flow modeling. The proposed nn-PINN method is employed to solve the constitutive models in conjunction with conservation of mass and momentum by benefiting from Automatic Differentiation (AD) in neural networks, hence avoiding the mesh generation step. nn-PINNs are tested for a number of different complex fluids with different constitutive models and for several flow protocols. These include a range of Generalized Newtonian Fluid (GNF) empirical constitutive models, as well as some phenomenological models with memory effects and thixotropic timescales. nn-PINNs are found to obtain the correct solution of complex fluids in spatiotemporal domains with good accuracy compared to the ground truth solution. We also present applications of nn-PINNs for complex fluid modeling problems with unknown boundary conditions on the surface, and show that our approach can successfully recover the velocity and stress fields across the domain, including the boundaries, given some sparse velocity measurements.
ABSTRACT
Correction for 'Hemorheology: the critical role of flow type in blood viscosity measurements' by Elahe Javadi et al., Soft Matter, 2021, 17, 8446-8458, DOI: 10.1039/D1SM00856K.
ABSTRACT
We report experimental and computational observations of dynamic contact networks for colloidal suspensions undergoing shear thickening. The dense suspensions are comprised of sterically stabilized poly(methyl methacrylate) colloids that are spherically symmetric and have varied surface roughness. Confocal rheometry and dissipative particle dynamics simulations show that the shear thickening strength ß scales exponentially with the scaled deficit contact number and the scaled jamming distance. Rough colloids, which experience additional rotational constraints, require an average of 1.5-2 fewer particle contacts as compared to smooth colloids, in order to generate the same ß. This is because the surface roughness enhances geometric friction in such a way that the rough colloids do not experience a large change in the free volume near the jamming point. The available free volume for colloids of different roughness is related to the deficiency from the maximum number of nearest neighbors at jamming under shear. Our results further suggest that the force per contact is different for particles with different morphologies.
ABSTRACT
The crucial role of the hemorheological characteristics of blood in a range of diagnoses, treatments and drug delivery mechanisms is widely accepted. Nonetheless, the literature on blood rheology remains inconclusive and sometimes even contradictory. This is in part due to natural variance of blood samples from one study to another, but also stems from fundamental differences in the consequences of the choice of rheometric flow employed. Here, and using a detailed and accurate computational scheme, we thoroughly study the role of flow type in measurement of blood viscosity. Performing these in silico measurements, we isolate the role of flow type and geometry at different hematocrit levels. We show that flow curves obtained in pressure-driven flows relevant to laminar circulatory flows deviate greatly from ones obtained in drag flow at the same hematocrit level. Our numerical platform also allows for the yield stress to be measured under quiescent conditions and without imposing any flow for different hematocrits. We discuss the scaling of the yield stress with the hematocrit level, and show that the differences in pressure vs. drag flows stem from the Red Blood Cell (RBC) orientation at different flow rates as well as the existence of a cell free layer close to the walls.
Subject(s)
Blood Viscosity , Hemorheology , Computer Simulation , Erythrocytes , HematocritABSTRACT
Colloidal gels exhibit rich rheological responses under flowing conditions. A clear understanding of the coupling between the kinetics of the formation/rupture of colloidal bonds and the rheological response of attractive gels is lacking. In particular, for gels under different flow regimes, the correlation between the complex rheological response, the bond kinetics, microscopic forces, and an overall micromechanistic view is missing in previous works. Here, we report the bond dynamics in short-range attractive particles, microscopically measured stresses on individual particles and the spatiotemporal evolution of the colloidal structures in different flow regimes. The interplay between interparticle attraction and hydrodynamic stresses is found to be the key to unraveling the physical underpinnings of colloidal gel rheology. Attractive stresses, mostly originating from older bonds dominate the response at low Mason number (the ratio of shearing to attractive forces) while hydrodynamic stresses tend to control the rheology at higher Mason numbers, mostly arising from short-lived bonds. Finally, we present visual mapping of particle bond numbers, their life times and their borne stresses under different flow regimes.
ABSTRACT
Reliable and accurate prediction of complex fluids' response under flow is of great interest across many disciplines, from biological systems to virtually all soft materials. The challenge is to solve non-trivial time and rate dependent constitutive equations to describe these structured fluids under various flow protocols. We present Rheology-Informed Neural Networks (RhINNs) for solving systems of Ordinary Differential Equations (ODEs) adopted for complex fluids. The proposed RhINNs are employed to solve the constitutive models with multiple ODEs by benefiting from Automatic Differentiation in neural networks. In a direct solution, the RhINNs platform accurately predicts the fully resolved solution of constitutive equations for a Thixotropic-Elasto-Visco-Plastic (TEVP) complex fluid for a series of flow protocols. From a practical perspective, an exhaustive list of experiments are required to identify model parameters for a multi-variant constitutive TEVP model. RhINNs are found to learn these non-trivial model parameters for a complex material using a single flow protocol, enabling accurate modeling with limited number of experiments and at an unprecedented rate. We also show the RhINNs are not limited to a specific model and can be extended to include various models and recover complex manifestations of kinematic heterogeneities and transient shear banding of thixotropic fluids.
ABSTRACT
Hyperviscosity syndrome (HVS) is characterized by an increase of the blood viscosity by up to seven times the normal blood viscosity, resulting in disturbances to the circulation in the vasculature system. HVS is commonly associated with an increase of large plasma proteins and abnormalities in the properties of red blood cells, such as cell interactions, cell stiffness, and increased hematocrit. Here, we perform a systematic study of the effect of each biophysical factor on the viscosity of blood by employing the dissipative particle dynamic method. Our in silico platform enables manipulation of each parameter in isolation, providing a unique scheme to quantify and accurately investigate the role of each factor in increasing the blood viscosity. To study the effect of these four factors independently, each factor was elevated more than its values for a healthy blood while the other factors remained constant, and viscosity measurement was performed for different hematocrits and flow rates. Although all four factors were found to increase the overall blood viscosity, these increases were highly dependent on the hematocrit and the flow rates imposed. The effect of cell aggregation and cell concentration on blood viscosity were predominantly observed at low shear rates, in contrast to the more magnified role of cell rigidity and plasma viscosity at high shear rates. Additionally, cell-related factors increase the whole blood viscosity at high hematocrits compared with the relative role of plasma-related factors at lower hematocrits. Our results, mapped onto the flow rates and hematocrits along the circulatory system, provide a correlation to underpinning mechanisms for HVS findings in different blood vessels.