ABSTRACT
BACKGROUND: Controlled and targeted drug delivery to treat nonalcoholic fatty liver disease (NAFLD) can benefit from additive attributes of natural formulation ingredients incorporated into the drug delivery vehicles. METHODS: Lovastatin (LVN) loaded, bile acid (BA) and fatty acid (FA) integrated nanoemulsomes (NES) were formulated by thin layer hydration technique for synergistic and targeted delivery of LVN to treat NAFLD. Organic phase NES was comprised of stearic acid with garlic (GL) and ginger (GR) oils, separately. Ursodeoxycholic acid and linoleic acid were individually incorporated as targeting moieties. RESULTS: Stability studies over 90 days showed average NES particle size, surface charge, polydispersity index, and entrapment efficiency values of 270 ± 27.4 nm, -23.8 ± 3.5 mV, 0.2 ± 0.04 and 81.36 ± 3.4%, respectively. Spherical NES were observed under a transmission electron microscope. In-vitro LVN release depicted non-fickian release mechanisms from GL and GR oils-based NES. Ex-vivo permeation of BA/FA integrated NES through isolated rat intestines showed greater flux than non-integrated ones. CONCLUSION: Liver histopathology of experimental rats together with in-vivo lipid profiles and liver function tests illustrated that these NES possess the clinical potential to be promising drug carriers for NAFLD.
Subject(s)
Bile Acids and Salts , Drug Delivery Systems , Drug Stability , Emulsions , Fatty Acids , Lovastatin , Non-alcoholic Fatty Liver Disease , Particle Size , Animals , Non-alcoholic Fatty Liver Disease/drug therapy , Rats , Bile Acids and Salts/chemistry , Male , Lovastatin/administration & dosage , Lovastatin/pharmacokinetics , Lovastatin/chemistry , Fatty Acids/chemistry , Fatty Acids/administration & dosage , Nanoparticles/chemistry , Rats, Sprague-Dawley , Drug Carriers/chemistryABSTRACT
Flurbiprofen (FBP), a nonsteroidal anti-inflammatory drug (NSAID), is commonly used to treat the pain of rheumatoid arthritis, but in prolonged use it causes gastric irritation and ulcer. To avoid these adverse events of NSAIDs, the simultaneous administration of H2 receptor antagonists such as ranitidine hydrochloride (RHCl) is obligatory. Here, we developed composite oral fast-disintegrating films (ODFs) containing FBP along with RHCl to provide a gastroprotective effect as well as to enhance the solubility and bioavailability of FBP. The ternary solid dispersion (TSD) of FBP was fabricated with Syloid® 244FP and poloxamer® 188 using the solvent evaporation technique. The synthesized FBP-TSD (coded as TSD) was loaded alone (S1) and in combination with plain RHCl (S2) in the composite ODFs based on hydroxypropyl methyl cellulose E5 (HPMC E5). The synthesized composite ODFs were evaluated by in vitro (thickness, folding endurance, tensile strength, disintegration, SEM, FTIR, XRD and release study) and in vivo (analgesic, anti-inflammatory activity, pro-inflammatory cytokines and gastroprotective assay) studies. The in vitro characterization revealed that TSD preserved its integrity and was effectively loaded in S1 and S2 with optimal compatibility. The films were durable and flexible with a disintegration time ≈15 s. The release profile at pH 6.8 showed that the solid dispersion of FBP improved the drug solubility and release when compared with pure FBP. After in vitro studies, it was observed that the analgesic and anti-inflammatory activity of S2 was higher than that of pure FBP and other synthesized formulations (TSD and S1). Similarly, the level of cytokines (TNF-α and IL-6) was also markedly reduced by S2. Furthermore, a gastroprotective assay confirmed that S2 has a higher safety profile in comparison to pure FBP and other synthesized formulations (TSD and S1). Thus, composite ODF (S2) can effectively enhance the FBP solubility and its therapeutic efficacy, along with its gastroprotective effect.
ABSTRACT
One of the major challenges with curcumin is its poor solubility in water, which limits its absorption and bioavailability in the body. This study aimed to develop and characterize stable microemulsions (MEs) as MEs increase the dispersibility of curcumin in water and aid its absorption in the body. Curcumin-loaded MEs were developed with the goal of enhancing topical delivery and its pharmacological activity (antioxidant, antibacterial, anticancer activity, and anti-inflammatory). The pseudoternary phase diagram was constructed to find out the desired microemulsion region. The prepared MEs (ME1-ME5) were evaluated for pH, viscosity, size of the particle, electrical conductivity, zeta potential, and ex vivo permeation of the drug. The optimized ME formulation was selected based on particle size and was further evaluated for biological activity (in vitro/vivo). In vitro cytotoxic effects of formulations were checked on the human liver cancer cell line, HEPG2 (a cell line exhibiting epithelial-like morphology that was isolated from a hepatocellular carcinoma). Geranium oil, Tween 80 (as a surfactant), and propylene glycol (as a cosurfactant) were screened out based on solubility to formulate MEs. The optimized ME formulation (ME5), with a composition of 20:50:30 (geranium oil:Tween 80:propylene glycol), exhibited pH 4.36 ± 0.057, conductivity of 40.06 ± 0.05 µS/cm, viscosity of 165 ± 0.37 mPa·s, and droplet diameter of 199.39 ± 0.017 nm. The ex vivo permeation study demonstrated a significant cumulative amount of curcumin permeated in 24 h and had a flux of 130.91 ± 0.02 µg/cm2/h. Antioxidant activity demonstrated that curcumin-loaded microemulsion (ME5) exhibited higher scavenging activity (99.27 ± 0.021%) than blank microemulsion (94.67 ± 0.001%). Optimized curcumin-loaded microemulsion (ME5) exhibited zones of inhibition of 25.18 and 28.37 mm against Escherichia coli and Staphylococcus aureus, respectively. Among the cell lines tested, a higher concentration of ME5 showed the greatest cytotoxicity with a % viability of 8.22 ± 1.09%. Evidently, it also revealed significant in vivo anti-inflammatory effects with 93.29 ± 0.030% inhibition by the carrageenan-induced paw edema model (6 h study) and 88.39 ± 0.002% inhibition by the formalin-induced paw edema model (14 day study). In conclusion, microemulsion was safe and effective for effective delivery of curcumin with the potential for antioxidant, antibacterial, cytotoxic, and in vivo anti-inflammatory activities.
ABSTRACT
Plant essential oils (EOs) possess significant bioactivities (antibacterial and antioxidant) and can be substituted for potentially harmful synthetic preservatives in the food industry. However, limited water solubility, bioavailability, volatility, and stability limit their use. Therefore, the goal of this research was nanosizing lavender essential oil (LEO), basil essential oil (BEO), and clove essential oil (CEO) in a microemulsion (ME) to improve their physicochemical attributes and bioefficacy. Tween 80 and Transcutol P were utilized for construction of pseudoternary phase diagrams. It was observed that the concentration of EOs had a great impact on the physicochemical and biological properties of MEs. A spherical droplet of MEs with a diameter of less than 20 nm with a narrower size distribution (polydispersity index (PDI) = 0.10-0.27) and a ζ potential of -0.27 to -9.03 was observed. ME formulations were also evaluated for viscosity, conductivity, and the refractive index. Moreover, the impact of delivery systems on the antibacterial property of EOs was assessed by determining the zone of inhibition and minimum inhibitory concentration against two distinct pathogen classes (S. aureus and E. coli). Crystal violet assay was used to measure the growth and development of biofilms. According to bioefficacy assays, ME demonstrated more efficient antibacterial activity against microorganisms at concentrations lower than pure EOs. CEO ME had superior activity againstS. aureus and E. coli. Similarly, dose-dependent antioxidant capacity was noted for MEs. Consequently, nanosized EO formulations with improved physicochemical properties and enhanced bioactivities can be employed in the food processing sector as a preservation agent.
ABSTRACT
BCS class II drugs exhibit low aqueous solubility and high permeability. Such drugs often have an incomplete or erratic absorption profile. This study aimed to predict the effects of ß-cyclodextrin (ßCD) and different hydrophilic polymers (poloxamer 188 (PXM-188), polyvinyl pyrrolidone (PVP) and soluplus (SOLO)) on the saturated solubility and dissolution profile of hydrophobic model drug rivaroxaban (RIV). Binary inclusion complex with ßCD were prepared by kneading and solvent evaporation method, at drug to cyclodextrin weight molar ratios of 1:1, 1:2, and 1:4. Saturated solubility of the hydrophobic model moiety was evaluated with ßCD to explore the increment in saturated solubility. Dissolution test was carried out to assess the drug release from the produced binary inclusion complex in the aqueous medium. Solid state analysis was performed using Fourier transform infrared spectroscopy (FTIR), Differential scanning calorimetry (DSC), X-ray diffraction (XRD), and Scanning electron microscopy (SEM) techniques. When compared to pure drug, the binary complex (Drug: ßCD at molar ratio of 1:2 w/w) demonstrated the best performance in terms of enhanced solubility and drug release. Furthermore, ternary inclusion complex was prepared with hydrophilic polymers SOLO, PVP K-30 and PXM-188 at 0.5%,1%,2.5%,5% and 10% w/w to optimized binary formulation RIV:ßCD (1:2) prepared by kneading (KN) and solvent evaporation (S.E) method. The findings demonstrated that among ternary formulations (1:2 Drug: ßCD: SOLO 10% S.E) manifested greatest improvement in saturated solubility and dissolution rate. Results of solubility enhancement and improvement in dissolution profile of model drug by ternary inclusion complexation were also supported by FTIR, DSC, XRD, and SEM analysis. So, it can be concluded that the ternary inclusion systems were more effective compared to the binary combinations in improving solubility as well as dissolution of hydrophobic model drug rivaroxaban.
ABSTRACT
In Parkinson's disease (PD), degradation of dopaminergic neurons in substantia nigra causes striatal deficiency of dopamine, which results in tremors, bradykinesia with instability in posture, rigidity and shuffled gait. Prevalence of PD increases with age as from 65 to 85 years. In an attempt to devise targeted safe therapy, nanoparticles of methyl 4-hydroxy-2H-1,2-benzothiazine-3-carboxylate 1,1-dioxide (MBD) (MBDN), were prepared and their acute toxicity and safety was evaluated. Thirty-six healthy albino mice were randomly divided into six groups (n = 6): normal control, diseased control, standard (levodopa/carbidopa (100/25 mg/kg) and the remaining three groups were administered 1.25, 2.5 and 5 mg/kg MBDN during 21 days study. Except control, all mice, were injected haloperidol (1 mg/ kg i.p.) 1-h prior to treatment to induce PD. Acute toxicity test showed, no effect of MBDN on lipid profile, brain, renal and liver function and histoarchitecture of kidney, liver and heart, except decreased (p < 0.05) platelet count. Behavioral studies showed significant improvement (p < 0.001) in motor function and reduction of oxidation status in a MBDN in a dose dependent manner. Thus, the study findings revealed significance of MBDN as a selective MAO-B inhibitor for the improvement of Parkinson's symptoms in animal model.
Subject(s)
Parkinson Disease , Mice , Animals , Parkinson Disease/drug therapy , Parkinson Disease/metabolism , Haloperidol/toxicity , Haloperidol/therapeutic use , Dopamine/metabolism , Brain/metabolismABSTRACT
Here, we evaluate the feasibility of co-loading plain ranitidine hydrochloride (RHCl) and microencapsulated flurbiprofen (FBP) in a Lycoat® RS780-based oral fast disintegrating film (ODF). These films were developed by the solvent casting method to minimize the adverse effects of FBP and reduce the dosage form burden on patients. Optimized FBP microparticles (M3) with an average size of 21.2 ± 9.2 µm were loaded alone (F1) and in combination with plain RHCl (F2) in the composite ODF. All films were evaluated physicomechanically and physicochemically. These films were resilient, flexible, and disintegrated within thirty seconds. SEM images showed intact FBP microparticles in both formulations and, moreover, did not observe an interaction between the drug and film components. Microencapsulated FBP was released in a controlled manner over 48 h from the proposed formulations, while RHCl was released within 5 min from F2. After in vitro evaluation, formulations were also tested for in vivo anti-inflammatory activity, cytokine (TNF-α and IL-6) levels, and gastroprotective effects in rats. The anti-inflammatory activity and gastroprotective effect of F2 were markedly higher than pure FBP and other synthesized formulations (M3 and F1). The average score of gastric lesions was in the order of pure FBP (15.5 ± 1.32) > M3 (8 ± 2) > F1 (1 ± 0.5) > F2 (0.5 ± 0) > control (0). Additionally, F2 showed a sustained anti-inflammatory effect up to 10 h in the rat paw edema model. Furthermore, F2 also markedly reduced TNF-α and IL-6 levels. Conclusively, the Lycoat® RS780-based composite film could be a promising carrier for the co-loading of microencapsulated FBP with RHCl. In the future, an optimized formulation (F2) could be capable of countering the issues related to multiple drug administration in geriatric patients and evading the gastric irritation associated with FBP.
ABSTRACT
Inflammation is the core contributor in the pathogenesis of various acute and chronic illness including appendicitis, bronchitis, arthritis, cancer and neurological diseases. NSAIDs, commonly used medications for inflammatory diseases, on prolonged use cause GI bleeding, ulcers and many more issues. Plant-based therapeutic agents including essential oils in combination with low-dose synthetic drugs have been shown to produce synergistic effects and reduce complications of synthetic drugs. This study was designed to evaluate the anti-inflammatory, analgesic and anti-pyretic properties of Eucalyptus globulus essential oil alone and in combination with flurbiprofen. GC-MS analysis was performed to screen chemical composition of oil. In vitro anti-inflammatory assay (membrane stabilization assay) and in vivo inflammatory acute (carrageenan and histamine-induced paw oedema) and chronic (cotton pellet-induced granuloma and Complete Freund's adjuvant-induced arthritis) models were performed to check anti-inflammatory properties. Acetic acid-induced algesia and yeast-induced pyrexia models were performed to check analgesic and anti-pyretic properties. qRT-PCR was performed to study the effect of treatments on the expression of inflammatory biomarkers. GC-MS analysis of E. globulus essential oil showed the presence of eucalyptol along with other active biomolecules. 500 + 10 mg/kg of oil-drug combination showed significantly (p < 0.05) better in vitro membrane stabilization effects as compared with groups treated with 500 mg/kg of E. globulus oil and 10 mg/kg of Flurbiprofen alone. 500 + 10 mg/kg of oil-drug combination showed significantly (p < 0.05) better anti-inflammatory, analgesic and antipyretic effects as compared to 500 mg/kg of E. globulus oil alone in all in vivo models. When comparison was done between 500 + 10 mg/kg of oil-drug combination-treated and 10 mg/kg Flurbiprofen-treated group, the former group showed significantly (p < 0.05) better anti-inflammatory and anti-pyretic effects, but there were non-significant differences in the analgesic model. Animal group treated with 10 mg/kg of Flurbiprofen showed significantly (p < 0.05) better anti-inflammatory and analgesic effects than group treated with 500 mg/kg of oil alone while, there were non-significant differences in anti-pyretic effects. qRT-PCR analysis showed significant (p < 0.05) down-regulation in the expression of IL-4 and TNF-α in serum samples of animals treated with 500 + 10 mg/kg of oil-drug combination as compared to the diseased control (arthritic) group. Overall, the current research demonstrates that Eucalyptus globulus essential oil in combination with flurbiprofen showed better anti-inflammatory, analgesic and anti-pyretic effects than oil and flurbiprofen alone which is attributed to the down-regulation of pro-inflammatory biomarkers (IL-4 and TNF-α). Further studies are required to formulate a stable dosage form and to check the anti-inflammatory efficacy in different inflammatory disorders.
Subject(s)
Arthritis , Eucalyptus , Flurbiprofen , Oils, Volatile , Animals , Flurbiprofen/pharmacology , Flurbiprofen/therapeutic use , Eucalyptol/pharmacology , Eucalyptol/therapeutic use , Eucalyptus/chemistry , Eucalyptus Oil/pharmacology , Interleukin-4 , Tumor Necrosis Factor-alpha , Anti-Inflammatory Agents , Analgesics , Anti-Inflammatory Agents, Non-Steroidal/pharmacology , Fever/drug therapy , Plant Extracts/pharmacology , Oils, Volatile/pharmacology , Oils, Volatile/therapeutic use , Arthritis/drug therapyABSTRACT
Hydrogels are crosslinked three-dimensional networks, and their properties can be easily tuned to target the various segments of the gastrointestinal tract (GIT). Cetirizine HCl (CTZ HCl) is an antihistaminic drug, which when given orally can upset the stomach. Moreover, this molecule has shown maximum absorption in the intestine. To address these issues, we developed a pH-responsive semi-interpenetrating polymer network (semi-IPN) for the delivery of CTZ HCl to the lower part of the GIT. Initially, 10 different formulations of itaconic acid-grafted-poly (acrylamide)/aloe vera [IA-g-poly (AAm)/aloe vera] semi-IPN were developed by varying the concentration of IA and aloe vera using the free radical polymerization technique. Based on swelling and sol-gel analysis, formulation F5 containing 0.3%w/w aloe vera and 6%w/w IA was chosen as the optimum formulation. The solid-state characterization of the optimized formulation (F5) revealed a successful incorporation of CTZ HCl in semi-IPN without any drug-destabilizing interaction. The in vitro drug release from F5 showed limited release in acidic media followed by a controlled release in the intestinal environment for over 72 h. Furthermore, during the in vivo evaluation, formulation F5 did not affect the hematological parameters, kidney, and liver functions. Clinical observations did not reveal any signs of illness in rabbits treated with hydrogels. Histopathological images of vital organs of treated animals showed normal cellular architecture. Thus, the results suggest a non-toxic nature and overall potential of the developed formulation as a targeted drug carrier.
ABSTRACT
Curcumin (Cur) entrapped poly(vinyl alcohol) (PVA)/gelatin composite films were prepared by cross-linking with tannic acid (TA) as bioactive dressings for rapid wound closure. Films were evaluated for mechanical strength, swelling index, water vapor transmission rate (WVTR), film solubility, and in-vitro drug release studies. SEM revealed uniform and smooth surfaces of blank (PG9) and Cur-loaded composite films (PGC4). PGC4 exhibited excellent mechanical strength (tensile strength (TS) and Young's modulus (YM) were 32.83 and 0.55 MPa, respectively), swelling ability (600-800% at pH 5.4, 7.4, and 9), WVTR (2003 ± 26), and film solubility (27.06 ± 2.0). Sustained release (81%) of the encapsulated payload was also observed for 72 h. The antioxidant activity determined by DPPH free radical scavenging showed that the PGC4 possessed strong % inhibition. The PGC4 formulation displayed higher antibacterial potential against S. aureus (14.55 mm zone of inhibition) and E. coli (13.00 mm zone of inhibition) compared to blank and positive control by the agar well diffusion method. An in-vivo wound healing study was carried out on rats using a full-thickness excisional wound model. Wounds treated with PGC4 showed very rapid healing about 93% in just 10 days post wounding as compared to 82.75% by Cur cream and 80.90% by PG9. Furthermore, histopathological studies showed ordered collagen deposition and angiogenesis along with fibroblast formation. PGC4 also exerted a strong anti-inflammatory effect by downregulating the expression of pro-inflammatory cytokines (TNF-α and IL-6 were lowered by 76% and 68% as compared to the untreated group, respectively). Therefore, Cur-loaded composite films can be an ideal delivery system for effective wound healing.
ABSTRACT
Traditional wound dressings have a limited capacity to absorb exudates, are permeable to microbes, and may adhere to wounds, which leads to secondary injuries. Hydrogels are promising alternative dressings to overcome the above challenges. In this study, we developed sodium alginate-based hydrogel films loaded with Betula utilis bark extract. These films were prepared via solvent-casting crosslinking method and evaluated for wound healing activity. Prepared films were 0.05-0.083 mm thick, flexible with folding endurance ranging from 197-203 folds, which indicates good physical properties. Optimized formulations exhibited successful loading of extract in the film matrix without any interaction as confirmed by FTIR. Maximum zone of inhibition against Gram-positive and Gram-negative bacteria was achieved by optimum formulation (B6), i.e., 19 mm and 9 mm, respectively, with > 90% scavenging activity. Furthermore, this optimum formulation (B6) was able to achieve 93% wound contraction in rats. Histograms of the optimized formulation treated group also revealed complete reepithelization of wounds. Conclusively, our extract-loaded hydrogel dressing successfully demonstrated its potential for cutaneous wound healing.
ABSTRACT
The current study was designed to formulate ternary solid dispersions (TSDs) of dexibuprofen (Dex) by solvent evaporation to augment the solubility and dissolution profile, in turn providing gastric protection and effective anti-inflammatory activity. Initially, nine formulations (S1 to S9) of binary solid dispersions (BSDs) were developed. Formulation S1 comprising a 1:1 weight ratio of Dex and Syloid 244FP® was chosen as the optimum BSD formulation due to its better solubility profile. Afterward, 20 TSD formulations were developed using the optimum BSD. The formulation containing Syloid 244FP® with 40% Gelucire 48/16® (S18) and Poloxamer 188® (S23) successfully enhanced the solubility by 28.23 and 38.02 times, respectively, in pH 6.8, while dissolution was increased by 1.99- and 2.01-fold during the first 5 min as compared to pure drug. The in vivo gastroprotective study in rats suggested that the average gastric lesion index was in the order of pure Dex (8.33 ± 2.02) > S1 (7 ± 1.32) > S18 (2.17 ± 1.61) > S23 (1.83 ± 1.04) > control (0). The in vivo anti-inflammatory study in rats revealed that the percentage inhibition of swelling was in the order of S23 (71.47 ± 2.16) > S18 (64.8 ± 3.79) > S1 (54.14 ± 6.78) > pure drug (18.43 ± 2.21) > control (1.18 ± 0.64) after 6 h. ELISA results further confirmed the anti-inflammatory potential of the developed formulation, where low levels of IL-6 and TNF alpha were reported for animals treated with S23. Therefore, S23 could be considered an effective formulation that not only enhanced the solubility and bioavailability but also reduced the gastric irritation of Dex.
ABSTRACT
In this paper, we fabricated semi-interpenetrating polymeric network (semi-IPN) of hydroxypropyl-ß-cyclodextrin-grafted-poly(acrylic acid)/poly(vinyl pyrrolidone) (HP-ß-CD-g-poly(AA)/PVP) by the free radical polymerization technique, intended for colon specific release of dexamethasone sodium phosphate (DSP). Different proportions of polyvinyl pyrrolidone (PVP), acrylic acid (AA), and hydroxypropyl-beta-cyclodextrin (HP-ß-CD) were reacted along with ammonium persulphate (APS) as initiator and methylene-bis-acrylamide (MBA) as crosslinker to develop a hydrogel system with optimum swelling at distal intestinal pH. Initially, all formulations were screened for swelling behavior and AP-8 was chosen as optimum formulation. This formulation was capable of releasing a small amount of drug at acidic pH (1.2), while a maximum amount of drug was released at colonic pH (7.4) by the non-Fickian diffusion mechanism. Fourier transformed infrared spectroscopy (FTIR) revealed successful grafting of components and development of semi-IPN structure without any interaction with DSP. Thermogravimetric analysis (TGA) confirmed the thermal stability of developed semi-IPN. X-ray diffraction (XRD) revealed reduction in crystallinity of DSP upon loading in the hydrogel. The scanning electron microscopic (SEM) images revealed a rough and porous hydrogel surface. The toxicological evaluation of semi-IPN hydrogels confirmed their bio-safety and hemocompatibility. Therefore, the prepared hydrogels were pH sensitive, biocompatible, showed good swelling, mechanical properties, and were efficient in releasing the drug in the colonic environment. Therefore, AP-8 can be deemed as a potential carrier for targeted delivery of DSP to treat inflammatory bowel diseases.
ABSTRACT
[This corrects the article DOI: 10.1021/acsomega.2c03053.].
ABSTRACT
In this study, biocomposite hydrogel films made from flaxseed gum (FSG)/kappa carrageenan (CGN) were fabricated, using potassium chloride as a crosslinker and glycerol as a plasticizer. The composite films were loaded with deferoxamine (DFX), an iron chelator that promotes neovascularization and angiogenesis for the healing of wounds. The properties of the biocomposite hydrogel films, including swelling, solubility, water vapor transmission rate, tensile strength, elongation at break, and Young's modulus studies, were tested. The films were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). In addition, drug release studies in PBS at pH 7.2 were investigated. In vivo analysis was performed by assessing the wound contraction in a full-thickness excisional wound rat model. Hematoxylin & eosin (H & E) and Masson's trichome staining were performed to evaluate the effect of the films on wound healing progress. The visual and micro-morphological analysis revealed the homogenous structure of the films; however, the elongation at break property decreased within the crosslinked film but increased for the drug-loaded film. The FTIR analysis confirmed the crosslinking due to potassium chloride. A superior resistance towards thermal degradation was confirmed by TGA for the crosslinked and drug-loaded films. Drug release from the optimum film was sustained for up to 24 h. In vivo testing demonstrated 100% wound contraction for the drug-loaded film group compared to 72% for the pure drug solution group. In light of the obtained results, the higher potential of the optimized biocomposite hydrogel film for wound healing applications was corroborated.
ABSTRACT
Topical preparations have a problem of being wiped off after a short time, which results in low activity of the active moiety. In this research, topical organogels (OGs) were prepared with different oils for the controlled action of miconazole nitrate. Various oils were checked for their gel-forming ability. Controlled release OGs were prepared with a 15% concentration of glyceryl monostearate. Differential scanning calorimetry was performed to study the thermal behavior of gels. X-ray diffraction revealed that the drug was changed into an amorphous form from the crystalline form. The absence of any interaction between the active ingredient and excipients was concluded by Fourier Transform Infrared spectroscopy. Permeability studies were carried out with cellulose acetate membrane by using Franz diffusion cell containing phosphate buffer saline pH 7.4. The release of drug followed the Weibull model. A frequency sweep test was performed to study the rheological behavior of optimized formulations. Rheology revealed the true nature of formulations whether they are gels or just viscous fluids. Images of scanning electron microscopy showed a network formed by the gelator molecules. The antifungal activity was checked against C. albicans and A. niger and it was best by the formulation made by TT. It was concluded that all the OGs gave controlled topical antifungal action.
Subject(s)
Antifungal Agents , Miconazole , Antifungal Agents/chemistry , Candida albicans , Delayed-Action Preparations , Excipients , Gels/chemistry , Oils , Phosphates , RheologyABSTRACT
Agarose (AG) forms hydrocolloid in hot water and possesses a noteworthy gel strength. However, no reasonable scientific work on investigating the mucoadhesive character of AG has been reported. Therefore, the current study was designed to develop AG and carbopol (CP) based buccal gel scaffold for simultaneous release of benzocaine (BZN) and tibezonium iodide (TIB). Gels' scaffold formulations (F1−F12) were prepared with varied concentrations (0.5−1.25% w/v) of AG and CP alone or their blends (AG-CP) using homogenization technique. The prepared formulations were characterized for solid-state, physicochemical, in vitro, ex vivo, and in vivo mucoadhesive studies in healthy volunteers. The results showed that mucoadhesive property of AG was concentration dependent but improved by incorporating CP in the scaffolds. The ex vivo mucoadhesive time reached >36 h when AG was used alone or blended with CP at 1% w/v concentration or above. The optimized formulation (F10) depicted >98% drugs release within 8 h and was also storage stable up to six months. The salivary concentration of BZN and TIB from formulation F10 yielded a Cmax value of 9.97 and 8.69 µg/mL at 2 and 6 h (tmax), respectively. In addition, the FTIR, PXRD, and DSC results confirmed the presence of no unwanted interaction among the ingredients. Importantly, the mucoadhesive study performed on healthy volunteers did not provoke any signs of inflammation, pain, or swelling. Clearly, it was found from the results that AG-CP scaffold provided better mucoadhesive properties in comparison to pure AG or CP. Conclusively, the developed AG based mucoadhesive drug delivery system could be considered a potential alternative for delivering drugs through the mucoadhesive buccal route.
ABSTRACT
Melilotus indicus (L.) All. is known to have anti-inflammatory and anticancer properties. The present study explored the in vivo skin carcinogenesis attenuating potential of ethanolic extract of M. indicus (L.) All. (Miet) in a 7,12-dimethylbenz[a]anthracene (DMBA)-induced skin cancer model. The ethanolic extract of the plant was prepared by a maceration method. HPLC analysis indicated the presence of quercetin in abundance and also various other phytoconstituents. DPPH radical scavenging assay results showed moderate antioxidant potential (IC50 = 93.55 ± 5.59 µg/mL). A topical acute skin irritation study showed the nonirritant nature of Miet. Data for the skin carcinogenic model showed marked improvement in skin architecture in Miet and its primary phytochemicals (quercetin and coumarin) treated groups. Miet 50% showed comparable effects with 5-fluorouracil. Significant (p < 0.05) anticancerous effects were seen in coumarin-quercetin combination-treated animals than in single agent (coumarin and quercetin alone)-treated animals. Chorioallantoic membrane (CAM) assay results showed the antiangiogenic potential of Miet. Treatment with Miet significantly down-regulated the serum levels of CEA (carcinoembryonic antigen) and TNF-α (Tumor necrosis factor-α). Data for the docking study indicated the binding potential of quercetin and coumarin with TNF-α, EGFR, VEGF, and BCL2 proteins. Thus, it is concluded that Miet has skin cancer attenuating potential that is proposed to be due to the synergistic actions of its bioactive molecules. Further studies to explore the effects of Miet and its bioactive molecules as an adjuvant therapy with low dose anticancer drugs are warranted, which may lead to a new area of research.
ABSTRACT
The aim of this study was to improve the solubility and prevent the ulcerogenic effect of flurbiprofen. Initially, binary and ternary solid dispersions (BSDs and TSDs) of flurbiprofen were prepared by using non-ordered mesoporous silica and gelucire. After preformulation testing (solubility, flow properties, % yield, and entrapment efficiency), four formulations were selected for further detailed studies. Solid-state characterization of optimized formulations (S1, S6, S7, and S12) showed successful drug incorporation in the solid dispersion at the molecular state without any noticeable interactions. The in vitro solubility and release study showed an increase in solubility and 98-100% of drug release in 30-45 min. The in vivo gastro-protective effect of the optimized formulations containing flurbiprofen and silica (1:1) with 25% w/w gelucire (S6 and S12) showed a reduction in the gastric lesion index (GLI) after four days of treatment. Moreover, histological images of the stomach lining (S6 and S12) illustrated normal epithelial cells and a partially protected mucosal membrane. Thus, TSD exhibited a significant increase in solubility and the dissolution rate and reduced the gastric ulceration. Therefore, TSDs are dubbed as efficacious carriers to enhance the bioavailability of flurbiprofen while simultaneously reducing its side effects.
ABSTRACT
We developed alginate-based floating microbeads of clarithromycin with therapeutic oils for the possible eradication of Helicobacter pylori (H. pylori) infections by enhancing the residence time of the carrier at the site of infection. In pursuit of this endeavor, the alginate was blended with hydroxy propyl methyl cellulose (HPMC) as an interpenetrating polymer to develop beads by ionotropic gelation using calcium carbonate as a gas generating agent. The developed microbeads remained buoyant under gastric conditions for 24 h. These microbeads initially swelled and afterwards decreased in size, possibly due to the erosion of the polymer. Furthermore, swelling was also affected by the type of encapsulated oil, i.e., swelling decreased with increasing concentrations of eucalyptus oil and increased with increasing concentrations of oleic acid. Antibacterial assays of the formulations showed significant antibacterial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli); these assays also showed synergistic activity between clarithromycin and therapeutic oils as evident from the higher zone of inhibition of the microbeads as compared to the pure drug and oils. Scanning electron microscopy (SEM) images revealed a smoother surface for oleic acid containing the formulation as compared to eucalyptus oil containing the formulation. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) revealed the development of a stable formulation, while Fourier transform infrared spectrophotometry (FTIR) studies did not reveal any interaction between the polymers and the active ingredients. Optimized formulations (CLM3 and CLM6) were designed to release the drug in a controlled manner in gastric media by Fickian diffusion. Conclusively, the developed microbeads are a promising carrier to overcome the narrow therapeutic index and low bioavailability of clarithromycin, while the presence of therapeutic oils will produce synergistic effects with the drug to eradicate infection effectively.