A Federated Learning Model Based on Hardware Acceleration for the Early Detection of Alzheimer's Disease.

Alzheimer's disease (AD) is a progressive illness with a slow start that lasts many years; the disease's consequences are devastating to the patient and the patient's family. If detected early, the disease's impact and prognosis can be altered significantly. Blood biosamples are often employed in simple medical testing since they are cost-effective and easy to collect and analyze. This research provides a diagnostic model for Alzheimer's disease based on federated learning (FL) and hardware acceleration using blood biosamples. We used blood biosample datasets provided by the ADNI website to compare and evaluate the performance of our models. FL has been used to train a shared model without sharing local devices' raw data with a central server to preserve privacy. We developed a hardware acceleration approach for building our FL model so that we could speed up the training and testing procedures. The VHDL hardware description language and an Altera 10 GX FPGA are utilized to construct the hardware-accelerator approach. The results of the simulations reveal that the proposed methods achieve accuracy and sensitivity for early detection of 89% and 87%, respectively, while simultaneously requiring less time to train than other algorithms considered to be state-of-the-art. The proposed algorithms have a power consumption ranging from 35 to 39 mW, which qualifies them for use in limited devices. Furthermore, the result shows that the proposed method has a lower inference latency (61 ms) than the existing methods with fewer resources.

Detection of Cardiovascular Disease from Clinical Parameters Using a One-Dimensional Convolutional Neural Network.

Heart disease is a significant public health problem, and early detection is crucial for effective treatment and management. Conventional and noninvasive techniques are cumbersome, time-consuming, inconvenient, expensive, and unsuitable for frequent measurement or diagnosis. With the advance of artificial intelligence (AI), new invasive techniques emerging in research are detecting heart conditions using machine learning (ML) and deep learning (DL). Machine learning models have been used with the publicly available dataset from the internet about heart health; in contrast, deep learning techniques have recently been applied to analyze electrocardiograms (ECG) or similar vital data to detect heart diseases. Significant limitations of these datasets are their small size regarding the number of patients and features and the fact that many are imbalanced datasets. Furthermore, the trained models must be more reliable and accurate in medical settings. This study proposes a hybrid one-dimensional convolutional neural network (1D CNN), which uses a large dataset accumulated from online survey data and selected features using feature selection algorithms. The 1D CNN proved to show better accuracy compared to contemporary machine learning algorithms and artificial neural networks. The non-coronary heart disease (no-CHD) and CHD validation data showed an accuracy of 80.1% and 76.9%, respectively. The model was compared with an artificial neural network, random forest, AdaBoost, and a support vector machine. Overall, 1D CNN proved to show better performance in terms of accuracy, false negative rates, and false positive rates. Similar strategies were applied for four more heart conditions, and the analysis proved that using the hybrid 1D CNN produced better accuracy.

Cuffless Blood Pressure Measurement Using Linear and Nonlinear Optimized Feature Selection.

The cuffless blood pressure (BP) measurement allows for frequent measurement without discomfort to the patient compared to the cuff inflation measurement. With the availability of a large dataset containing physiological waveforms, now it is possible to use them through different learning algorithms to produce a relationship with changes in BP. In this paper, a novel cuffless noninvasive blood pressure measurement technique has been proposed using optimized features from electrocardiogram and photoplethysmography based on multivariate symmetric uncertainty (MSU). The technique is an improvement over other contemporary methods due to the inclusion of feature optimization depending on both linear and nonlinear relationships with the change of blood pressure. MSU has been used as a selection criterion with algorithms such as the fast correlation and ReliefF algorithms followed by the penalty-based regression technique to make sure the features have maximum relevance as well as minimum redundancy. The result from the technique was compared with the performance of similar techniques using the MIMIC-II dataset. After training and testing, the root mean square error (RMSE) comes as 5.28 mmHg for systolic BP and 5.98 mmHg for diastolic BP. In addition, in terms of mean absolute error, the result improved to 4.27 mmHg for SBP and 5.01 for DBP compared to recent cuffless BP measurement techniques which have used substantially large datasets and feature optimization. According to the British Hypertension Society Standard (BHS), our proposed technique achieved at least grade B in all cumulative criteria for cuffless BP measurement.

Advancement in the Cuffless and Noninvasive Measurement of Blood Pressure: A Review of the Literature and Open Challenges.

Hypertension is a chronic condition that is one of the prominent reasons behind cardiovascular disease, brain stroke, and organ failure. Left unnoticed and untreated, the deterioration in a health condition could even result in mortality. If it can be detected early, with proper treatment, undesirable outcomes can be avoided. Until now, the gold standard is the invasive way of measuring blood pressure (BP) using a catheter. Additionally, the cuff-based and noninvasive methods are too cumbersome or inconvenient for frequent measurement of BP. With the advancement of sensor technology, signal processing techniques, and machine learning algorithms, researchers are trying to find the perfect relationships between biomedical signals and changes in BP. This paper is a literature review of the studies conducted on the cuffless noninvasive measurement of BP using biomedical signals. Relevant articles were selected using specific criteria, then traditional techniques for BP measurement were discussed along with a motivation for cuffless measurement use of biomedical signals and machine learning algorithms. The review focused on the progression of different noninvasive cuffless techniques rather than comparing performance among different studies. The literature survey concluded that the use of deep learning proved to be the most accurate among all the cuffless measurement techniques. On the other side, this accuracy has several disadvantages, such as lack of interpretability, computationally extensive, standard validation protocol, and lack of collaboration with health professionals. Additionally, the continuing work by researchers is progressing with a potential solution for these challenges. Finally, future research directions have been provided to encounter the challenges.

Cuff-less blood pressure measurement based on hybrid feature selection algorithm and multi-penalty regularized regression technique.

One of the prominent reasons behind the deterioration of cardiovascular conditions is hypertension. Due to lack of specific symptoms, sometimes existing hypertension goes unnoticed until significant damage happens to the heart or any other body organ. Monitoring of BP at a higher frequency is necessary so that we can take early preventive measures to control and keep it within the normal range. The cuff-based method of measuring BP is inconvenient for frequent daily measurements. The cuffless BP measurement method proposed in this paper uses features extracted from the electrocardiogram (ECG) and photoplethysmography (PPG). ECG and PPG both have distinct characteristics, which change with the change of blood pressure levels. Feature extraction and hybrid feature selection algorithms are followed by a generalized penalty-based regression technique led to a new BP measurement process that uses the minimum number of features. The performance of the proposed technique to measure blood pressure was compared to an approach using an ordinary linear regression method with no feature selection and to other contemporary techniques. MIMIC-II database was used to train and test our proposed method. The root mean square error (RMSE) for systolic blood pressure (SBP) improved from 11.2 mmHg to 5.6 mmHg when the proposed technique was implemented and for diastolic blood pressure (DBP) improved from 12.7 mmHg to 6.69 mmHg. The mean absolute error (MAE) was found to be 4.91 mmHg for SBP and 5.77 mmHg for DBP, which have shown improvement over other existing cuffless techniques where the substantial number of patients, as well as feature selection algorithm, were implemented. In addition, according to the British Hypertension Society standard (BHS) standard for cuff-based BP measurement, the criteria for acceptable measurement are to achieve at least grade B; our proposed method also satisfies this criterion.