3D printed elastomeric biomaterial mitigates compaction during in vitro vasculogenesis.

A key parameter for the success of most cellular implants is the formation of a complete and comprehensive intra-implant vessel network. Pre-vascularization, the generation of vessel structures in vitro prior to transplantation, provides accelerated implant perfusion via anastomosis, but scalability and ease of integration hinder clinical translation. For fibrin-based vasculogenesis approaches, the remodeling and degradation of the fragile, hydrogel matrix during the formation of vessel-like structures results in rapid, cell-mediated construct compaction leading to dense, capillary-like structures with ineffective network coverage. To resolve these challenges, vasculogenic hydrogels were embedded within a highly porous, biostable three-dimensional (3D) polydimethylsiloxane (PDMS) scaffold. Using reverse-casting of 3D-printed molds, scaffolds exhibited highly interconnected and reproducible pore structures. Pore size was optimized via in vivo screening of intra-device angiogenesis. The inclusion of the PDMS frame with vasculogenic hydrogels significantly reduced fibrin compaction in vitro, resulting in easily manipulated constructs with predictable dimensionality and increased surface area compared to fibrin hydrogel alone. Globally, vascular morphogenesis was altered by the PDMS frame, with significantly larger and less dense network structures. Vasculogenic proteomic evaluation showed a temporal impact of the addition of the PDMS frame, indicating altered cellular proliferation and migration signaling. This work establishes a platform for improving the generation of translational pre-vascularized networks for greater flexibility to meet the needs of clinically scaled, engineered tissues. STATEMENT OF SIGNIFICANCE: Competent intra-implant vascularization is a significant issue hindering the success of engineered tissues. Pre-vascularization approaches, whereby a vascular network is formed in vitro and subsequently implanted into the host to anastomose, is a promising approach but it is limited by the compacted, dense, and poorly functional microcapillary structures typically formed using soft hydrogels. Herein, we have uniquely addressed this challenge by adding a 3D printed PDMS-based open framework structure that serves to prevent hydrogel compaction. Globally, we observed distinct differences in overall construct geometry, vascular network density, compaction, and morphogenesis, indicating that this PDMS framework lead to elevated maturity of this in vitro network while retaining its global dimensions. Overall, this novel approach elevates the translational potential of pre-vascularized constructs.

Engineering Modular, Oxygen-Generating Microbeads for the In Situ Mitigation of Cellular Hypoxia.

Insufficient oxygenation is a key obstacle in the design of clinically scalable tissue-engineered grafts. In this work, an oxygen-generating composite material, termed OxySite, is created through the encapsulation of calcium peroxide (CaO2 ) within polydimethylsiloxane and formulated into microbeads for ease in tissue integration. Key material parameters of reactant loading, porogen addition, microbead size, and an outer rate-limiting layer are modulated to characterize oxygen generation kinetics and their suitability for cellular applications. In silico models are developed to predict the local impact of different OxySite microbead formulations on oxygen availability within an idealized cellular implant. Promising OxySite microbead variants are subsequently coencapsulated with murine ß-cells within macroencapsulation devices, resulting in improved cellular metabolic activity and function under hypoxic conditions when compared to controls. Additionally, the coinjection of optimized OxySite microbeads with murine pancreatic islets within a confined transplant site demonstrates ease of integration and improved primary cell function. These works highlight the broad translatability delivered by this new oxygen-generating biomaterial format, whereby the modularity of the material provides customization of the oxygen source to the specific needs of the cellular implant.

Engineering a macroporous oxygen-generating scaffold for enhancing islet cell transplantation within an extrahepatic site.

Insufficient oxygenation is a serious issue arising within cell-based implants, as the hypoxic period between implantation and vascularization of the graft is largely unavoidable. In situ oxygen supplementation at the implant site should significantly mitigate hypoxia-induced cell death and dysfunction, as well as improve transplant efficacy, particularly for highly metabolically active cells such as pancreatic islets. One promising approach is the use of an oxygen generating material created through the encapsulation of calcium peroxide within polydimethylsiloxane (PDMS), termed OxySite. In this study, OxySite microbeads were incorporated within a macroporous PDMS scaffold to create a single, streamlined, oxygen generating macroporous scaffold. The resulting OxySite scaffold generated sufficient local oxygenation for up to 20 days, with nontoxic levels of reaction intermediates or by-products. The benefit of local oxygen release on transplant efficacy was investigated in a diabetic Lewis rat syngeneic transplantation model using a clinically relevant islet dosage (10,000 IEQ/kg BW) with different isolation purities (80%, 90%, and 99%). Impure islet preparations containing pancreatic non-islet cells, which are common in the clinical setting, permit examination of the effect of increased overall oxygen demand. Our transplantation outcomes showed that elevating the oxygen demand of the graft with decreasing isolation purity resulted in decreased graft efficacy for control implants, while the integration of OxySite significantly mitigated this impact and resulted in improved graft outcomes. Results highlight the superior clinical translational potential of these off-the-shelf OxySite scaffolds, where islet purity and the overall oxygen demands of implants are increased and highly variable. The oxygen-generating porous scaffold further provides a broad platform for enhancing the survival and efficacy of cellular implants for numerous other applications. STATEMENT OF SIGNIFICANCE: Hypoxia is a serious issue within tissue engineered implants. To address this challenge, we developed a distinct macroporous scaffold platform containing oxygen-generating microbeads. This oxygen-generating scaffold showed the potential to support clinically relevant cell dosages for islet transplantation, leading to improved treatment efficacy. This platform can also be used to mitigate hypoxia for other biomedical applications.

Immunosuppressive PLGA TGF-ß1 Microparticles Induce Polyclonal and Antigen-Specific Regulatory T Cells for Local Immunomodulation of Allogeneic Islet Transplants.

Allogeneic islet transplantation is a promising cell-based therapy for Type 1 Diabetes (T1D). The long-term efficacy of this approach, however, is impaired by allorejection. Current clinical practice relies on long-term systemic immunosuppression, leading to severe adverse events. To avoid these detrimental effects, poly(lactic-co-glycolic acid) (PLGA) microparticles (MPs) were engineered for the localized and controlled release of immunomodulatory TGF-ß1. The in vitro co-incubation of TGF-ß1 releasing PLGA MPs with naïve CD4+ T cells resulted in the efficient generation of both polyclonal and antigen-specific induced regulatory T cells (iTregs) with robust immunosuppressive function. The co-transplantation of TGF-ß1 releasing PLGA MPs and Balb/c mouse islets within the extrahepatic epididymal fat pad (EFP) of diabetic C57BL/6J mice resulted in the prompt engraftment of the allogenic implants, supporting the compatibility of PLGA MPs and local TGF-ß1 release. The presence of the TGF-ß1-PLGA MPs, however, did not confer significant graft protection when compared to untreated controls, despite measurement of preserved insulin expression, reduced intra-islet CD3+ cells invasion, and elevated CD3+Foxp3+ T cells at the peri-transplantation site in long-term functioning grafts. Examination of the broader impacts of TGF-ß1/PLGA MPs on the host immune system implicated a localized nature of the immunomodulation with no observed systemic impacts. In summary, this approach establishes the feasibility of a local and modular microparticle delivery system for the immunomodulation of an extrahepatic implant site. This approach can be easily adapted to deliver larger doses or other agents, as well as multi-drug approaches, within the local graft microenvironment to prevent transplant rejection.

Controlled Release of Anti-Inflammatory and Proangiogenic Factors from Macroporous Scaffolds.

The simultaneous local delivery of anti-inflammatory and proangiogenic agents via biomaterial scaffolds presents a promising method for improving the engraftment of tissue-engineered implants while avoiding potentially detrimental systemic delivery. In this study, polydimethylsiloxane (PDMS) microbeads were loaded with either anti-inflammatory dexamethasone (Dex) or proangiogenic 17ß-estradiol (E2) and subsequently integrated into a single macroporous scaffold to create a controlled, dual-drug delivery platform. Compared to a standard monolithic drug dispersion scaffold, macroporous scaffolds containing drug-loaded microbeads exhibited reduced initial burst release and increased durability of drug release for both agents. The incubation of scaffolds with lipopolysaccharide (LPS)-stimulated M1 macrophages found that Dex suppressed the production of proinflammatory and proangiogenic factors when compared to drug-free control scaffolds; however, the coincubation of macrophages with Dex and E2 scaffolds restored their proangiogenic features. Following implantation, Dex-loaded microbead scaffolds (Dex-µBS) suppressed host cell infiltration and integration, when compared to controls. In contrast, the codelivery of dexamethasone with estrogen from the microbead scaffold (Dex+E2-µBS) dampened overall host cell infiltration, but restored graft vascularization. These results demonstrate the utility of a microbead scaffold approach for the controlled, tailored, and local release of multiple drugs from an open framework implant. It further highlights the complementary impacts of local Dex and E2 delivery to direct the healthy integration of implants, which has broad applications to the field of tissue engineering and regenerative medicine. Impact statement Inflammatory responses and vascularization are two significant challenges associated with the engraftment of tissue-engineered implants. To overcome these challenges, we developed a microbead scaffold platform for the local delivery of anti-inflammatory and proangiogenic agents. This drug delivery system showed the potential to simultaneously control the release of multiple agents, leading to a healthy integration of implants with host tissues. This multifunctional platform could be useful to numerous cellular transplants and engineered tissues.