ABSTRACT
The ankle joint, which connects the lower limbs and the sole of the foot, is prone to sprain during walking and sports, which leads to ankle arthritis. Supratroleolar osteotomy is an ankle preserving operation for the treatment of ankle arthritis, in which the osteotomy is an important fixing and supporting part. In order to avoid stress shielding effect as much as possible, the osteotomy block is designed as a porous structure. In this study, the osteotomy block was designed based on three-period minimal surface, and the designed structure was manufactured by 3D printing. The mechanical properties of different structures were studied by mechanical test and finite element simulation. In mechanical tests, the Gyroid structure showed a progressive failure mechanism from bottom to bottom, while the Diamond structure showed a shear failure zone at 45° Angle, which was not conducive to energy absorption and was more prone to brittle fracture than the Gyroid structure. Therefore, the Gyroid structure is valuable for further research in the development of porous osteotomy.
Subject(s)
Finite Element Analysis , Osteotomy , Printing, Three-Dimensional , Osteotomy/methods , Humans , Foot/surgery , Ankle Joint/surgeryABSTRACT
OBJECTIVE: To evaluate the feasibility and accuracy of virtual preoperative planning and 3D-printed templates for pre-contoured plates for the treatment of posterior wall fractures of the acetabulum. METHODS: A retrospective analysis of 29 patients with posterior acetabular wall fractures treated between August 2017 and March 2021 were divided into 2 groups based on whether to use preoperative virtual planning and 3D printed template. In 3D-printing group, there were 14 patients, including 10 males and 4 femalesï¼ aged from 21 to 53 years oldï¼CT-based virtual surgical planning was done using Mimics and 3-Matic software and 3D-printed templates for pre-contoured plates were adopted. In conventional group, there were 15 patients, including 10 males and 5 femalesï¼aged from 19 to 55 years oldï¼conventional method of intra-operative contouring to adapt the plate to the fracture region was adopted. Blood loss, surgical time, radiographic quality of reduction, and hip function were compared between groups. RESULTS: The difference in operation time and intraoperative blood loss was significantï¼P<0.05ï¼. Twenty-three patients were followed up from 12 to 30 months, and the fractures in both groups healed with a healing time of 3 to 6 months. At the last follow-up, the Merle d'Aubign-Postel score of the 3D printed group was lower than that of the conventional groupï¼P<0.05ï¼, with no significant differences in walking ability, hip mobility and total scoreï¼P>0.05ï¼. In 3D printing group, 6 cases were excellent, 5 cases were good, 3 cases were fairï¼in conventional group, 5 cases were excellent, 5 cases were good, 4 cases were fair, 1 case was worseï¼no significant difference between two groupsï¼P>0.05ï¼. CONCLUSION: Virtual preoperative planning and 3D-printed templates for pre-contoured plates can reduce operative time and the blood loss of surgery, improve the quality of reduction. This method is efficient, accurate and reliable to treat acetabular posterior wall fractures.
Subject(s)
Fractures, Bone , Hip Fractures , Spinal Fractures , Male , Female , Humans , Young Adult , Adult , Middle Aged , Fracture Fixation, Internal/methods , Retrospective Studies , Hip Fractures/surgery , Fractures, Bone/diagnostic imaging , Fractures, Bone/surgery , Acetabulum/diagnostic imaging , Acetabulum/surgery , Acetabulum/injuries , Printing, Three-Dimensional , Bone Plates , Treatment OutcomeABSTRACT
OBJECTIVE: To investigate the short-term clinical effect of the computer virtual technique combined with pelvic reduction frame in the treatment of complex pelvic fractures. METHODS: Thirty patients with Tile C pelvic fractures treated by percutaneous minimally invasive pelvic reduction frame from April 2018 to April 2020 were retrospectively analyzed, including 21 males and 9 females, aged from 19 to 57 (39.40±9.85) years old. The patient's pelvic CT DICOM data were imported into Mimics software to reconstruct the virtual fracture model. Virtual reduction and nail placement were carried out on the fracture model, and then simulated fluoroscopy was carried out to record the ideal fluoroscopy orientation and angle to guide the correct fluoroscopy during operation. The operation time, fluoroscopy times and intraoperative blood loss were recorded. The quality of fracture reduction was evaluated by Matta image score standard, and the postoperative function was evaluated by Majeed function score standard. RESULTS: All 30 patients achieved closed reduction and percutaneous screw fixation. According to Matta score, the excellent and good rate of fracture reduction was 93.3%(28/30). A total of 67 channel screws were inserted, and the excellent and good rate was 98.5%(66/67). The operation time was (173.54±79.31) min, fluoroscopy time was (90.81±41.11) times, intraoperative blood loss was (81.21±43.97) ml. All incisions healed at one stage without broken nails or re-displacement of fractures. All patients were followed up for 12 months. At the final follow-up, Majeed function score was 73 to 94(85.66±5.33) scores. CONCLUSION: Computer virtual technology combined with pelvic reduction frame could rapidly, accurately and safely reduce and fix unstable pelvic fractures. Computer virtualization could help surgeons to recognition and understanding pelvic fractures, pelvic reduction frame could improve the surgeon's ability to manage complex and unstable pelvic injuries.
Subject(s)
Fractures, Bone , Pelvic Bones , Adult , Blood Loss, Surgical , Computers , Female , Fracture Fixation, Internal/methods , Fractures, Bone/surgery , Humans , Male , Middle Aged , Pelvic Bones/injuries , Retrospective StudiesABSTRACT
This study was designed to compare screw stabilities augmented with different volumes of PMMA and analyze relationship between screw stability and volume of PMMA and optimum volume of PMMA in different bone condition. Osteoporotic and severely osteoporotic synthetic bone blocks were divided into groups A0-A5 and B0-B5, respectively. Different volumes of PMMA were injected in groups A0 to A5 and B0 to B5. Axial pullout tests were performed and F max was measured. F max in groups A1-A5 were all significantly higher than group A0. Except between groups A1 and A2, A3 and A4, and A4 and A5, there were significant differences on F max between any other two groups. F max in groups B1-B5 were all significantly higher than group B0. Except between groups B1 and B2, B2 and B3, and B4 and B5, there were significant differences on F max between any other two groups. There was significantly positive correlation between F max and volume of PMMA in osteoporotic and severely osteoporotic blocks. PMMA can significantly enhance pedicle screw stability in osteoporosis and severe osteoporosis. There were positive correlations between screw stability and volume of PMMA. In this study, injection of 3 mL and 4 mL PMMA was preferred in osteoporotic and severely osteoporotic blocks, respectively.
Subject(s)
Lumbar Vertebrae/pathology , Osteoporosis/therapy , Pedicle Screws , Biomechanical Phenomena , Bone Cements/therapeutic use , Bone Density , Humans , Osteoporosis/pathology , Polymethyl Methacrylate/chemistry , Polymethyl Methacrylate/therapeutic useABSTRACT
This study was designed to analyze the flow and distribution of polymethylmethacrylate (PMMA) in vertebral body through computer simulation. Cadaveric lumbar vertebrae were scanned through electron beam tomography (EBT). The data was imported into Mimics software to build computational model. Vertebral body center and junction of pedicle and vertebral body were chosen as injection points. Silicone oil with viscosity of 100,000 cSt matching with PMMA bone cement was chosen for injection. The flow and distribution of silicone oil were analyzed using Fluent software. In vertebral body, silicone oil formed a circle-like shape centered by injection point on transverse and longitudinal sections, finally forming a sphere-like shape as a whole. Silicone oil diffused along lateral and posterior walls forming a circle-like shape on transverse section centered by injection point in pedicle, eventually forming a sphere-like shape as a whole. This study demonstrated that silicone oil flowed and diffused into a circle-like shape centered by injection point and finally formed a sphere-like shape as a whole in both vertebral body and pedicle. The flow and distribution of silicon oil in computational model could simulate PMMA distribution in vertebral body. It may provide theoretical evidence to reduce PMMA leakage risk during percutaneous vertebroplasty.
Subject(s)
Bone Cements/therapeutic use , Computer Simulation , Polymethyl Methacrylate/administration & dosage , Spinal Fractures/therapy , Cadaver , Female , Humans , Lumbar Vertebrae/drug effects , Lumbar Vertebrae/pathology , Silicone Oils/administration & dosage , Spinal Fractures/pathology , Tomography, X-Ray ComputedABSTRACT
In bones, osteoblasts are responsible for bone formation. The cell death of osteoblasts may cause a series of bone diseases and lead to bone loss, such as osteoarthrosis, hyperparathyroidism, and Paget's disease. Reactive oxygen species (ROS) are reported as a main factor for osteoblast cell death and further several bone diseases. However, the detailed mechanism is still largely unknown. Here, we found that ROS could induce cell death of rat osteoblast-like cell line ROS 17/2.8 via Akt (protein kinase B). Also, the mammalian target of rapamycin signaling was involved in this process. Our findings could help to reveal the cellular mechanism of osteoblast cell death, which is served for the pursuit of clinical treatment targets of relative bone diseases.
Subject(s)
Apoptosis , Osteoblasts/metabolism , Oxidative Stress , Proto-Oncogene Proteins c-akt/antagonists & inhibitors , Reactive Oxygen Species/metabolism , Signal Transduction , TOR Serine-Threonine Kinases/antagonists & inhibitors , Animals , Apoptosis/drug effects , Biomarkers/metabolism , Bone Resorption/chemically induced , Bone Resorption/metabolism , Bone Resorption/pathology , Cell Line , Down-Regulation/drug effects , Hydrogen Peroxide/toxicity , Kinetics , Osteoblasts/cytology , Osteoblasts/drug effects , Osteoblasts/pathology , Oxidants/toxicity , Oxidative Stress/drug effects , Phosphorylation/drug effects , Protein Processing, Post-Translational/drug effects , Proto-Oncogene Proteins c-akt/metabolism , Proto-Oncogene Proteins c-bcl-2/metabolism , Rats , Signal Transduction/drug effects , TOR Serine-Threonine Kinases/chemistry , TOR Serine-Threonine Kinases/metabolism , bcl-Associated Death Protein/metabolismABSTRACT
Leptin and vascular cell adhesion molecules-1 (VCAM-1) are two important mediators in obesity-related osteoarthritis, while the molecular mechanism linking leptin to VCAM-1 production is still obscure. Here we show that leptin upregulates VCAM-1 mRNA and protein levels in a time- and dose-dependent manner. Mechanistically, leptin induces VCAM-1 promoter activity by increasing the expression of C/EBP-α and facilitating its binding to a newly identified element in the VCAM-1 gene. Gain or loss of function studies reveal a regulatory role of C/EBP-α on VCAM-1 expression. Finally, elevated plasma leptin level correlates to increased C/EBP-α and VCAM-1 production in chondrocytes from obese mice.
Subject(s)
CCAAT-Enhancer-Binding Proteins/physiology , Chondrocytes/metabolism , Leptin/physiology , Vascular Cell Adhesion Molecule-1/genetics , Animals , Binding Sites , Cells, Cultured , Humans , Male , Mice , Mice, Inbred C57BL , Obesity/blood , Primary Cell Culture , Promoter Regions, Genetic , RNA, Messenger/genetics , RNA, Messenger/metabolism , Vascular Cell Adhesion Molecule-1/metabolismABSTRACT
STUDY DESIGN: Expansive pedicle screw (EPS) and polymethylmethacrylate-augmented pedicle screw (PMMA-PS) were inserted in sheep vertebrae in vitro and were evaluated by performing biomechanical tests, radiographic examinations and histological observations. OBJECTIVE: The objective of the study was to compare the biomechanical and interfacial performances of EPS and PMMA-PS in sheep lumbar vertebrae in vitro. SUMMARY OF BACKGROUND DATA: It is a great challenge for orthopedic surgeons performing transpedicular fixation in the osteoporotic spine. It was reported that either the EPS or PMMA-PS could increase the screw stability. However, there are no studies comparing the 2 kinds of screws especially in primary spinal instrumentation. METHODS: A total of 60 sheep lumbar vertebrae were randomly divided into 3 groups. A pilot hole was made in advance in all samples using the same method. Thereafter, the conventional pedicle screw (CPS) was inserted directly into the pilot hole in the CPS group; the hole in PMMA-PS group was first filled with polymethylmethacrylate (PMMA; 1.0 mL) and then inserted with CPS; and the EPS was inserted directly into the vertebrae in EPS group. After a period of 24 hours, biomechanical tests were performed to evaluate screw stability, and x-ray examination, micro-computerized tomography analysis, and histologic observation were performed to evaluate the interface between screw and bone. RESULTS: Compared with the stability of CPS, those of EPS and PMMA-PS were significantly enhanced. However, no significant differences were detected between the stabilities of EPS and PMMA-PS. The PMMA surrounding the screw blocked direct contact between bone and screw and formed a "screw-PMMA-bone" interface in the PMMA-PS group. There was a "screw-bone" interface in both CPS and EPS groups. Nevertheless, the expanded anterior part of EPS formed a claw-like structure pressing the surrounding bone trabeculae, which made the local bone tissue more compacted and denser than that in the CPS group. CONCLUSIONS: EPS can enhance the screw stability as markedly as the traditional PMMA-PS in primary surgery, and EPS can form a better immediate interface between screw and bone compared with PMMA-PS. EPS also can effectively avoid thermal injury, leakage, and compression caused by PMMA. A great feasibility was proved in this study to perform comparisons between the 2 kinds of pedicle screws in osteoporotic sheep vertebrae in vivo in the further research. In conclusion, we propose that EPS has a great application potential in augmentation of screw stability in the clinic.
Subject(s)
Bone Screws , Lumbar Vertebrae/physiology , Materials Testing , Orthopedic Procedures/instrumentation , Animals , Biomechanical Phenomena , Bone Density , Imaging, Three-Dimensional , Lumbar Vertebrae/diagnostic imaging , Polymethyl Methacrylate , Sheep , Spine/surgery , X-Ray MicrotomographyABSTRACT
BACKGROUND: It was reported that expansive pedicle screw (EPS) and polymethylmethacrylate-augmented pedicle screw (PMMA-PS) could be used to increase screw stability in osteoporosis. However, there are no studies comparing the two kinds of screws in vivo. Thus, we aimed to compare biomechanical and interfacial performances of EPS and PMMA-PS in osteoporotic sheep spine. METHODOLOGY/PRINCIPAL FINDINGS: After successful induction of osteoporotic sheep, lumbar vertebrae in each sheep were randomly divided into three groups. The conventional pedicle screw (CPS) was inserted directly into vertebrae in CPS group; PMMA was injected prior to insertion of CPS in PMMA-PS group; and the EPS was inserted in EPS group. Sheep were killed and biomechanical tests, micro-CT analysis and histological observation were performed at both 6 and 12 weeks post-operation. At 6-week and 12-week, screw stabilities in EPS and PMMA-PS groups were significantly higher than that in CPS group, but there were no significant differences between EPS and PMMA-PS groups at two study periods. The screw stability in EPS group at 12-week was significantly higher than that at 6-week. The bone trabeculae around the expanding anterior part of EPS were more and denser than that in CPS group at 6-week and 12-week. PMMA was found without any degradation and absorption forming non-biological "screw-PMMA-bone" interface in PMMA-PS group, however, more and more bone trabeculae surrounded anterior part of EPS improving local bone quality and formed biological "screw-bone" interface. CONCLUSIONS/SIGNIFICANCE: EPS can markedly enhance screw stability with a similar effect to the traditional method of screw augmentation with PMMA in initial surgery in osteoporosis. EPS can form better biological interface between screw and bone than PMMA-PS. In addition, EPS have no risk of thermal injury, leakage and compression caused by PMMA. We propose EPS has a great application potential in augmentation of screw stability in osteoporosis in clinic.
Subject(s)
Bone Screws , Lumbar Vertebrae/physiopathology , Lumbar Vertebrae/surgery , Osteoporosis/physiopathology , Osteoporosis/surgery , Polymethyl Methacrylate/chemistry , Animals , Biomechanical Phenomena , Bone Density , Female , Imaging, Three-Dimensional , Lumbar Vertebrae/diagnostic imaging , Lumbar Vertebrae/pathology , Osteoporosis/diagnostic imaging , Osteoporosis/pathology , Sheep , Weight-Bearing , X-Ray MicrotomographyABSTRACT
This article introduces a new-type anti-rotation reduction internal fixator, which can be applied in various spine fractures and dislocations in order to shorten the operation time, to raise reduction effect, and to reduce the complications such as the loss of reduction, broken nail, broken rod etc. Biomechanical tests and clinical applications have proved that the internal fixator has the features of a short operation time, a definite fixation and few complications.