ABSTRACT
Iodinated X-ray contrast media (ICM) are ubiquitously present in water sources and challenging to eliminate using conventional processes, posing a significant risk to aquatic ecosystems. Ultraviolet light-emitting diodes (UV-LED) emerge as a promising technology for transforming micropollutants in water, boasting advantages such as diverse wavelengths, elimination of chemical additives, and no induction of microorganisms' resistance to disinfectants. The research reveals that iohexol (IOX) degradation escalates as UV wavelength decreases, attributed to enhanced photon utilization efficiency. Pseudo-first-order rate constants (kobs) were determined as 3.70, 2.60, 1.31 and 0.65 cm2 J-1 at UV-LED wavelengths of 255, 265, 275 and 285 nm, respectively. The optical properties of dissolved organic matter (DOM) and anions undeniably influence the UV-LED photolysis process through photon competition and the generation of reactive substances. The influence of Cl- on IOX degradation was insignificant at UV-LED 255, but it promoted IOX degradation at 265, 275 and 285 nm. IOX degradation was accelerated by ClO2-, NO3-and HA due to the formation of various reactive species. In the presence of NO3-, the kobs of IOX followed the order: 265 > 255 > 275 > 285 nm. Photosensitizers altered the spectral dependence of IOX, and the intermediate photoactivity products were detected using electron spin resonance. The transformation pathways of IOX were determined through density functional theory calculations and experiments. Disinfection by-products (DBPs) yields of IOX during UV-LED irradiation decreased as the wavelength increased: 255 > 265 > 275 > 285 nm. The cytotoxicity index value decreased as the UV-LED wavelength increased from 255 to 285 nm. These findings are crucial for selecting the most efficient wavelength for UV-LED degradation of ICM and will benefit future water purification design.
ABSTRACT
The degradation kinetics, reaction pathways, and disinfection by-products formation of an organic UV filter, benzophenone-4 (BP4) during UV/persulfate oxidation were investigated. BP4 can hardly be degraded by UV alone, but can be effectively decomposed by UV/persulfate following pseudo-first order kinetics. BP4 degradation rate was enhanced with increasing persulfate dosage and decreasing pH from 8 to 5. However, the degradation rate of BP4 at pH 9 was higher than that at pH 8 because of the presence of phenolic group in BP4 structure. and SO4-â were confirmed as the major contributors to BP4 decomposition in radical scavenging experiments, and the second-order rate constants between HOâ and BP4 as well as those between SO4-â and BP4 were estimated by establishing and solving a kinetic model. The presence of Br- and humic acid inhibited the decomposition of BP4, while NO3- promoted it. The mineralisation of BP4 was only 9.1% at the persulfate concentration of 50 µM. Six degradation intermediates were identified for the promulgation of the reaction pathways of BP4 during UV/persulfate oxidation were proposed as a result. In addition, the formation of DBP in the sequential chlorination was evaluated at different persulfate dosages, pH values, and water matrix. The results of this study can provide essential knowledge for the effective control of DBP formation with reducing potential hazard to provide safe drinking water to the public.
BP4 can be effectively degraded by UV/persulfate process, following pseudo-first order kinetics.
ABSTRACT
A commercialized and widely applied nanofiltration membrane, NF90, was in-situ modified through a surface grafting modification method by using 3-sulfopropyl methacrylate potassium salt and initiators. The effects of water electrical conductivity (EC) and fouling types on membrane separation efficiency were examined before and after membrane modification. Results reveal that both the pristine membrane (PTM) and surface grafting modification membrane (SGMM) had a declining permeate flux and salt (NaCl) removal efficiency but an increasing trend of pharmaceuticals and personal care products (PPCPs) removal with increasing water EC from 250 to 10,000 µs cm-1. However, SGMM exhibited a slightly declining permeate flux but 13%-17% and 1%-42% higher rejection of salt and PPCPs, respectively, compared with PTM, due to electrostatic repulsion and size exclusion provided by the grafted polymer. After sodium alginate (SA) and humic acid (HA) fouling, SGMM had 17%-26% and 16%-32% higher salt rejection and 1%-12% and 1%-51% greater PPCP removal, respectively, compared with PTM due to the additional steric barrier layer contributed by the foulants. The successful grafting and increasing hydrophilicity of the SGMM were confirmed by contact angle analysis, which was beneficial for mitigating membrane fouling. Overall, the proposed in-situ surface grafting modification of NF90 can considerably mitigate organic and biological fouling while raising the rejection of salt and PPCPs at different background water EC, which is beneficial for practical applications in producing clean and high quality water for consumers.
Subject(s)
Polymers , Sodium Chloride , Membranes , Electric Conductivity , WaterABSTRACT
The complex was prepared with preyssler polyoxoanion and transition metal (Mo), a cationic surfactant as a connector. It has tuneable physical and chemical potential which has been exploited to study novel properties. A new technique of shock wave impulses is also used on the Mo-PHP complex. Extensive use of cationic surfactants could impact accumulation in the environment set off the surfacing of bacterial resistance. Due to the electrostatic binding to bacterial surface, the hydrophobic parts of cationic surfactants tend to penetrate bacterial cell walls and may cause membrane lysis and bacteria death. The surfactant-supported and direct release of metal ions from P5W29Mo against bacterial resistance has been explained schematically. The dielectric study helps to understand the dissociation of cations that generate polarons and the hopping mechanism with neighbouring vacant atomic sites. Structural analysis confirms the formation of cationic surfactant incorporated polyoxoanion (Mo-PHP). A hexagonal shape-like structure for the PHP complex has been observed. The Mo-incorporated PHP complex was characterized using UV-visible (UV), Fourier Transform-infrared (IR), Raman spectra, scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD) techniques.
ABSTRACT
A novel keggin-type tetra-metalates substituted polyoxometalate was functionalized by 3-(aminopropyl)-imidazole (3-API) supporting a ligand substitution method. In this paper, polyoxometalate (POMs) (NH4)3 [PMo12O40] and transition metal substituted of (NH4)3 [{PMIVMo11O40}.(H2O)] (M = Mn, V) are used as one of the adsorbents. The 3-API/POMs hybrid have been synthesized and used as adsorbent for the photo-catalysis of azo-dye molecule degradation after visible-light illumination as a simulated organic contaminant in water. The transition metal (M = MIV, VIV) substituted keggin-type anions (MPOMs) were synthesized, which reveals the degradation of methyl orange (MO) of about 94.0 % and 88.6 %. Immobilizing high redox ability POMs as an efficient acceptor of photo generated electron, on metal 3-API. In the presence of visible light irradiation result reveals that 3-API/POMs (89.9 %) have incredibly achieved after certain irradiation time and at specific conditions (3)-API/POMs; photo-catalysts dose = 5mg/100 ml, pH = 3 and MO dye concentration = 5 ppm). As the surface of POM catalyst has strong absorption of azo-dye MO molecule engaged as a molecular exploration through photo catalytic reactant. From the SEM images it is clear that the synthesized POMs based materials and POMs conjugated MO have varieties of morphological changes observed such as flakes, rods and spherical like structures. Anti-bacterial study reveals that the process of targeted microorganism occur higher activity against pathogenic bacterium for 180 min of visible-light irradiation is measured in terms of zone of the inhibition. Furthermore, the photo catalytic degradation mechanism of MO using POM, metaled POMs and 3-API/POMs also has been discussed.
Subject(s)
Coloring Agents , Light , Coloring Agents/chemistry , Anions , Imidazoles/pharmacologyABSTRACT
RATIONALE: Subglottic tracheal stenosis is stenosis of the trachea between the vocal cords and the lower margin of the cricoid cartilage. The Montgomery T-tube is used as a tracheostomy tube and a combined tracheal stent to avoid postoperative tracheal stenosis. PATIENT CONCERNS: Because the stenosis is close to the glottis, surgical treatment is complex, and many complications may arise. DIAGNOSES: Subglottic tracheal stenosis. INTERVENTIONS: The patients underwent endotracheal intubation or tracheotomy because of acute pancreatitis, laryngeal malignancy, or cerebral hemorrhage after endotracheal intubation or tracheotomy and presented with varying degrees of tracheal stenosis and dyspnea. We relieved airway stenosis and improved dyspnea in these 3 patients by placing a Montgomery T-tube. OUTCOMES: None of the 3 patients had intraoperative complications. In 2 of the cases, airway secretions were stored after surgery. LESSONS: Montgomery T-tube placement is safe and effective for patients with complex subglottic tracheal stenosis.
Subject(s)
Laryngostenosis , Pancreatitis , Tracheal Stenosis , Humans , Trachea/surgery , Tracheal Stenosis/etiology , Tracheal Stenosis/surgery , Constriction, Pathologic/complications , Acute Disease , Pancreatitis/complications , Laryngostenosis/etiology , Intubation, Intratracheal/adverse effects , Postoperative ComplicationsABSTRACT
2,4,6-Trichloroanisole (2,4,6-TCA) has aroused a special concern for their odor problem and potential threats. In this study, the degradation of 2,4,6-TCA by UV/chlorination with different UV sources was compared, including low-pressure mercury lamp (LPUV, 254 nm) and ultraviolet light-emitting diode (UV-LED, 275 and 285 nm). The maximum removal of 2,4,6-TCA can be achieved by 275-nm UV-LED/chlorination in neutral and alkaline conditions which was 80.0%. The reaction, kinetics, and water matrix parameters on 2,4,6-TCA degradation were also evaluated. During UV-LED (275 nm)/chlorination, 2,4,6-TCA degradation was mainly caused by direct UV photolysis and indirect hydroxyl radical (HO·) oxidation, while reactive chlorine radicals (RCSs) had a negligible contribution. The second-order rate constant between HO· and 2,4,6-TCA was determined as 3.1 × 109 M-1 s-1. Increasing initial chlorine dosage and decreasing 2,4,6-TCA concentration or pH value significantly promoted 2,4,6-TCA degradation during UV/chlorination process. The presence of natural organic matter (NOM) and bicarbonate (HCO3-) can inhibit 2,4,6-TCA degradation, while chloride ion (Cl-) had a negligible effect. The kinetic model for 2,4,6-TCA degradation was established and validated, and the degradation pathways were proposed based on the identified intermediates. Furthermore, UV-LED (275 nm)/chlorination also exhibited a promising effect on 2,4,6-TCA removal in real water, which can be used to control 2,4,6-TCA pollution and odor problems.
Subject(s)
Water Pollutants, Chemical , Water Purification , Water , Halogenation , Chlorine/analysis , Kinetics , Odorants , Water Pollutants, Chemical/analysis , Ultraviolet Rays , Oxidation-ReductionABSTRACT
Combining pre-oxidation with activated carbon adsorption was explored as an ideal approach for removing iodine from water source to eliminate the formation of Iodinated trihalomethanes (I-THMs). Compared with permanganate and monochloramine, chlorine is more suitable as pre-oxidant to obtain higher active iodine species (HOI/I2). Active iodine species adsorption using both powdered activated carbon (PAC) and granular activated carbon (GAC) can be well fitted the pseudo-second-order kinetic model indicating that chemical adsorption was the dominant mechanism for HOI/I2 adsorption. The average pore size of activated carbons was the most strongly correlated with the adsorption capacity (R2 > 0.98), followed by methylene blue (R2 > 0.76), pore volume (R2 > 0.70) and iodine number (R2 > 0.67). Moreover, three models, including intraparticle diffusion, Byod kinetic, and diffusion-chemisorption were used to illustrate the mechanisms of HOI/I2 adsorption. Chemical adsorption was the dominant mechanism for HOI/I2 adsorption. In summary, at the molar ratio of [NaClO] and [I-] as 1.2, pre-chloriantion time of 5 min, subsequently dosage of 15 mg/L of PAC E with 20 min adsorption can remove 79.8% iodine. In addition, the combined process can eliminate 61%-87.2% of I-THMs in the subsequent chlor(am)ination. The results indicate that pre-chlorination combined with PAC can effectively removed HOI/I2 and attenuate I-THMs formation in the subsequent disinfection process.
Subject(s)
Drinking Water , Iodine , Water Purification , Charcoal , Trihalomethanes , Halogenation , Adsorption , Water Purification/methodsABSTRACT
To improve the performance of the conventional coagulation process, a permanganate (Mn(VII)) pre-oxidation combined with Fe(III)/peroxymonosulfate (PMS) coagulation process (Mn(VII)-Fe(III)/PMS) that can significantly improve the removal of dissolved organic carbon (DOC), turbidity, and micropollutants is proposed in this study. Compared with conventional Fe(III) coagulation, the Mn(VII)-Fe(III)/PMS process can also significantly enhance the removal of iohexol and sulfamethoxazole in raw water. During this process, the primary reduction product, Mn(IV), after Mn(VII) pre-oxidation was adsorbed on the floc surfaces and involved in the Fe(III)/PMS process. The natural organic matter (NOM) in raw water mediated the redox cycle of iron. The synergistic effect of NOM, Fe, and Mn facilitated the redox cycle of Mn(III)/Mn(IV) and Fe(III)/Fe(II) to promote the activation of PMS. The sulfate radical (SO4â¢-) played an important role in the degradation of micropollutants. The formation potential of the detected volatile disinfection by-product (DBP) during the subsequent chlorination was reduced by 21.9% after the Mn(VII)-Fe(III)/PMS process. This study demonstrated the promising application of the Mn(VII)-Fe(III)/PMS process for coagulation and micropollutant control and illustrated the reaction mechanism. This study provides guidance for improving conventional drinking water treatment processes.
Subject(s)
Ferric Compounds , Water Purification , Peroxides , Oxidation-ReductionABSTRACT
Chlorine dioxide (ClO2) has emerged as a broad-spectrum, safe, and effective disinfectant due to its high oxidation efficiency and reduced formation of organochlorinated by-products during application. This article provides an updated overview of ClO2-based oxidation processes used in water treatment. A systematic review of scientific information and experimental data on ClO2-based water purification procedures is presented. Concerning ClO2-based oxidation derivative problems, the pros and cons of ClO2-based combined processes are assessed and disinfection by-product (DBP) control approaches are proposed. The kinetic and mechanistic data on ClO2 reactivity towards micropollutants are discussed. ClO2 selectively reacts with electron-rich moieties (anilines, phenols, olefins, and amines) and eliminates certain inorganic ions and microorganisms with high efficiency. The formation of chlorite and chlorate during the oxidation process is a crucial concern when utilizing ClO2. Future applications include the combination of ClO2 with ferrous ions, activated carbon, ozone, UV, visible light, or persulfate processes. The combined process can reduce by-product generation while still ensuring ClO2 sterilization and disinfection. Overall, this research could provide useful information and new insights into the application of ClO2-based technologies.
Subject(s)
Chlorine Compounds , Disinfectants , Water Purification , Chlorine , Disinfection/methods , Oxides , Water Purification/methodsABSTRACT
The stress of freshwater scarcity has become a severe problem worldwide and drives the development of technologies for water recycling and reuse [...].
ABSTRACT
In this study, the formation of iodinated trihalomethanes (I-THMs) was systematically evaluated and compared for three treatment processes - (i) chlorination, (ii) monochloramine, and (iii) dichloramination - under different pH conditions. The results demonstrated that I-THM formation decreased in the order of monochloramination > dichloramination > chlorination in acidic and neutral pH. However, the generation of I-THMs increased in the dichloramination < chlorination < monochloramination order in alkaline condition. Specifically, the formation of I-THMs increased as pH increased from 5 to 9 during chlorination and monochloramination processes, while the maximum I-THM formation occurred at pH 7 during dichloramination. The discrepancy could be mainly related to the stability of the three chlor (am) ine disinfectants at different pH conditions. Moreover, in order to gain a thorough insight into the mechanisms of I-THM formation during dichloramination, further investigation was conducted on the influencing factors of DOC concentration and Br-/I- molar ratio. I-THM formation exhibited an increasing and then decreasing trend as the concentration of DOC increased from 1 to 7 mg-C/L, while the yield of I-THMs increased with increasing Br-/I- molar ratio from 5:0 to 5:10. During the three processes mentioned above, similar I-THM formation results were also obtained in real water, which indicates that the excessive generation of I-THMs should be paid special attention during the disinfection of iodide-containing water.
Subject(s)
Disinfectants , Water Pollutants, Chemical , Water Purification , Chlorine , Disinfection/methods , Halogenation , Iodides , Trihalomethanes , Water , Water Pollutants, Chemical/analysis , Water Purification/methodsABSTRACT
Organic chloramines (OCs) have become one of the research focuses in the field of drinking water treatment due to its limited oxidation and sterilization ability as well as potential cytotoxicity and genetic toxicity to the public. Among widespread OCs, produced by chlorinating cytosine are a typical one exists during chlorine disinfection. OCs degradation during UV, chlorination and UV/chlorine processes were systematically investigated. UV irradiation at 254 nm could effectively degrade OCs by 96.6% after 60 min, mainly because N-Cl bond had significant UV absorption at 250-280 nm leading to the generation of Cl⢠and HOâ¢. Direct chlorination had poor removal of OCs with the OCs concentration increased first and then decreased as time went by. On the other hand, the removal of OCs during UV/chlorination was much higher than that during chlorination, but was worse than that during UV alone. pH had a minor effect on OCs decomposition via UV irradiation, whereas the effect was pronounced in the chlorination and UV chlorine processes. UV wavelength can affect the degradation of OCs with efficiency decreased in the order of UV 254 > UV 265 > UV 275. The total yields of disinfection by-products (DBPs) during the degradation of OCs followed UV/chlorine > UV > chlorination. CH and DCAA were the two dominant types of DBPs among detected 7 DBPs. DBPs yield followed the order of UV254 > UV265 > UV275 at pH 6.0 and 7.0. After UV 265 irradiation, DBPs yield slightly decreased by 2.4%, 3.0% and 6.6% with the pH increased from 6.0 to 9.0. The results can provide theoretical basis for effective control of OCs in drinking water.
Subject(s)
Disinfectants , Drinking Water , Water Pollutants, Chemical , Water Purification , Chloramines/chemistry , Chlorine/chemistry , Disinfection/methods , Halogenation , Water Pollutants, Chemical/analysis , Water Purification/methodsABSTRACT
Permanganate (Mn(VII)) is widely used as a mild oxidant in water treatment. However, the reaction rates of some emerging contaminants with Mn(VII) are extremely low. In this study, benzoquinone (BQ), a redox mediator with the important component in dissolved organic matter (DOM), enhanced the oxidation of bisphenol A (BPA) by Mn(VII) in a wide pH range of 4.0-10.0. The redox cycle of BQ would produce semiquinone radicals, which could act as ligands to stabilize the formed Mn(III) in the system to promote the oxidation of BPA. Notably, the presence of BQ might promote the formation of MnO2. A novel mechanism was proposed that singlet oxygen (1O2), Mn(III)-ligands (Mn(III)-L) and in-situ formed MnO2 were the main contributors to accelerate BPA degradation in the Mn(VII)/BQ system. Under acidic conditions, the in-situ formed MnO2 involved in the redox reaction and part of the Mn(IV) was reduced to Mn(III), indicating that the electron transfer of BQ promoted the formation of active Mn species and enhanced the Mn(VII) oxidation performance. Semiquinone radicals generated by BQ transformation would couple with the hydrogen substitution products of BPA to inhibit BPA self-coupling and promote the ring-opening reactions of BPA. Mn(VII)/BQ had better effect in raw water than in pure water, indicating that the Mn(VII)/BQ system has high potential for practical application. This study provided insights into the role of DOM in enhancing the Mn(VII) oxidation in water treatment.
Subject(s)
Manganese Compounds , Oxides , Benzhydryl Compounds , Benzoquinones , Ligands , Oxidation-Reduction , Phenols , QuinonesABSTRACT
In this study, the degradation kinetic model and pathways of a UV filter, 2-phenylbenzimidazole-5-sulfonic acid (PBSA) during UV/chlorination were investigated. PBSA hardly degraded under UV irradiation or chlorination alone, but its degradation in UV/chlorination was efficient and followed pseudo-first order kinetics at pH 7. Increasing the chlorine dosage from 12.5 to 200 µM can enhance PBSA degradation, while increasing pH from 5 to 9 caused opposite effect. The second-order rate constants between radicals (âCl, âClO, and âOH) and PBSA and the contribution of âOH during UV/chlorination were determined. âCl and âOH were confirmed to be the main contributors to PBSA degradation. The presence of background [Formula: see text] and humic acid can inhibit PBSA degradation, but the presence of Cl- showed negligible effect. Kinetic model was established, and the prediction correlated well to the experimental results. The mineralization rate in terms of total organic carbon increased with reaction time to 44.9% after 60 min UV/chlorination. The PBSA degradation intermediates in UV/chlorination were identified, and the transformation pathways were proposed accordingly. Furthermore, the formation of chlorinated disinfection by-products (Cl-DBPs) were evaluated in the sequential chlorination for comprehensively evaluation of the efficiency, mechanism, and safety of removing PBSA using UV/chlorination.
Subject(s)
Water Pollutants, Chemical , Water Purification , Benzimidazoles , Chlorine/analysis , Disinfection/methods , Halogenation , Kinetics , Sulfonic Acids , Ultraviolet Rays , Water Pollutants, Chemical/analysis , Water Purification/methodsABSTRACT
Iodinated trihalomethanes (I-THMs) have drawn increasing concerns due to their higher toxicity than those of their chlorinated and brominated analogues. In this study, I-THM formation was firstly evaluated for three treatment scenarios - (i) chlorine alone, (ii) chloramine alone, and (iii) mixed chlorine/chloramine - in the presence and absence of UV irradiation for the iodide-containing humic acid solution or natural water. The results indicated that I-THM formation decreased in the order of mixed chlorination/chloramination > chloramination > > chlorination, which fitted the trend of toxicity evaluation results using Chinese hamster ovary cells. Conversely, total organic halide concentration decreased in the order of chlorination > > chloramination ≈ mixed chlorination/chloramination. Besides, I-THM formation can be efficiently controlled in a UV-activated mixed chlorine/chloramine system. Influencing factors including pH values and Br-/I- molar ratios were also systematically investigated in a mixed chlorine/chloramine system. Enhanced I-THM formation was observed with increasing pH values (6.0-8.0) and Br-/I- molar ratios (1: 1-10: 1). The results obtained in this study can provide new insights into the increasing risk of I-THM formation in a mixed chlorine/chloramine system and the effective control of I-THMs in the iodide-containing water using UV irradiation.
Subject(s)
Disinfectants , Water Pollutants, Chemical , Water Purification , Animals , CHO Cells , Chloramines , Chlorine , Cricetinae , Cricetulus , Disinfection/methods , Halogenation , Trihalomethanes , Water Pollutants, Chemical/analysis , Water Pollutants, Chemical/toxicity , Water Purification/methodsABSTRACT
Phthalate esters (PAEs) are a group of ubiquitous organic environmental contaminants. Engineered ferromanganese-bearing sludge-derived biochar (SDB), synthesized using one-step pyrolysis in the temperature range between 300 and 900 °C, was used to enable Fenton-like processes that decontaminated PAE-laden sediments. SDB was thoroughly characterized using scanning electron microscopyenergy-dispersive spectroscopy, transmission electron microscopy, Brunauer-Emmett-Teller surface area, thermogravimetric analysis, Raman spectroscopy, Fourier-transform infrared spectroscopy, electron paramagnetic resonance, X-ray photoelectron spectroscopy, and fluorescence excitation-emission matrix spectroscopy coupled with parallel factor analysis. The maximum PAE degradation was remarkable at 90% in 12 h at pH 6.0 in the presence of 1.7 g L-1 of SDB 900. The highly-effective PAE degradation was mainly attributed to the synergism between FeOx and MnOx, which strengthened the activation of percarbonate (PC) via electron transfer, hydroxy addition, and hydrogen abstraction through radical (HOâ¢) and nonradical (1O2) oxidation mechanisms, thereby facilitating PAE catalytic degradation over SDB in real sediments, which clearly proved the efficacy of ferromanganese-bearing SDB and PC for the remediation of contaminated sediments. The cytotoxicity exhibited by human skin keratinocyte cells exposure to high SDB concentration (100-400 µg mL-1) for 24-48 h was low indicating insignificant cellular toxicity and oxidative damages. This study provides a new strategy for freshwater sludge treatment and reutilization, which enables a water-cycle-based circular economy and waste-to-resource recycling.
Subject(s)
Esters , Sewage , Carbonates , Charcoal , Humans , Iron , Manganese , Phthalic AcidsABSTRACT
This study in-situ modified a commercial nanofiltration membrane, NF90, through the concentration-polymerization-enhanced radical graft polarization method by applying two agents of 3-sulfopropyl methacrylate potassium salt (SPM) and 2-hydroxyethyl methacrylate (HEMA) with different dosages. Surface characterization revealed that the modified membranes became rougher and more hydrophilic compared with the pristine membrane. The modified membranes exhibited considerably enhanced separation performance with 5.8-19.6% higher NaCl rejection and 17.2-19.9% higher pharmaceuticals and personal care products (PPCPs) rejection than the pristine membrane. When treating the feedwater with high silica concentration, the modified membranes exhibited relatively less flux decline with high percentage of reversible fouling, especially the ones modified using a lower monomer concentration (0.01 M SPM and 0.01 M HEMA). Moreover, membrane modification enhanced the PPCP rejection (1.3-5.4%) after silica fouling by mitigating foulant deposition on the membrane surface. The fouling mechanism was confirmed to be intermediate blocking of membrane pores. Therefore, the in-situ modification technique with a low monomer concentration proved to be effective for mitigating silica fouling and improving PPCP rejection, which can be easily performed and cost-effective in practical application.
ABSTRACT
Through interfacial polymerization (IP), a polyamide (PA) layer was synthesized on the top of a commercialized polysulfone substrate to form a thin-film composite (TFC) nanofiltration membrane. Graphene oxide (GO) was dosed during the IP process to modify the NF membrane, termed TFC-GO, to enhance oxidant resistance and membrane performance. TFC-GO exhibited increased surface hydrophilicity, water permeability, salt rejection, removal efficiency of pharmaceutical and personal care products (PPCPs), and H2O2 resistance compared with TFC. When H2O2 exposure was 0-96,000 ppm-h, the surfaces of the TFC and TFC-GO membranes were damaged, and swelling was observed using scanning electron microscopy. However, the permeate flux of TFC-GO remained stable, with significantly higher NaCl, MgSO4, and PPCP rejection with increasing H2O2 exposure intensity than TFC, which exhibited a 3.5-fold flux increase with an approximate 50% decrease in salt and PPCP rejection. GO incorporated into a PA layer could react with oxidants to mitigate membrane surface damage and increase the negative charge on the membrane surface, resulting in the enhancement of the electrostatic repulsion of negatively charged PPCPs. This hypothesis was confirmed by the significant decrease in PPCP adsorption onto the surface of TFC-GO compared with TFC. Therefore, TFC-GO membranes exhibited superior water permeability, salt rejection, and PPCP rejection and satisfactory resistance to H2O2, indicating its great potential for practical applications.
ABSTRACT
In order to overcome the challenges of low permeate flux (Jp) and the accompanying reverse solute flux (JS) during the forward osmosis (FO) membrane separation process, we synthesized four hybrid materials of polyacid-based organic compounds and incorporated them into the selective polyamide (PA) layer to make novel thin-film nanocomposite (TFN) FO membranes. The Jp and JS of each membrane were evaluated and used along with membrane selectivity (Jp/JS) as indicators of membrane separation performance. The fabricated and modified membranes were also characterized for ridge and valley surface morphologies with increasing hydrophilicity and finger-shaped parallel channels in the PSf substrate. Moreover, two highly hydrophilic nanoparticles of graphene oxide (GO) and titanium oxide (TiO2) were introduced with the hybrid materials for PA modification, which can further enhance the Jp of the TFN membranes. The highest Jp of the TFN membranes achieved 12.1 L/m2-h using 0.1% curcumin-acetoguanamine @ cerium polyacid (CATCP) and 0.0175% GO. The characteristic peaks of the hybrid materials were detected on the membrane surface using attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, evidencing successful incorporation of the hybrid materials during membrane modification. Here, we present the novel TFN membranes using hybrid materials for separation applications. The reactions for synthesizing the hybrid materials and for incorporating them with PA layer are proposed.