Shengmaisan combined with Liuwei Dihuang Decoction alleviates chronic intermittent hypoxia-induced cognitive impairment by activating the EPO/EPOR/JAK2 signaling pathway.

Chronic intermittent hypoxia (CIH), a principal pathophysiological aspect of obstructive sleep apnea (OSA), is associated with cognitive deficits. Clinical evidence suggests that a combination of Shengmaisan and Liuwei Dihuang Decoctions (SMS-LD) can enhance cognitive function by nourishing yin and strengthening the kidneys. This study aimed to assess the efficacy and underlying mechanisms of SMS-LD in addressing cognitive impairments induced by CIH. We exposed C57BL/6N mice to CIH for five weeks (20%-5% O2, 5 min/cycle, 8 h/day) and administered SMS-LD intragastrically (15.0 or 30 g·kg-1·day) 30 min before each CIH session. Additionally, AG490, a JJanus kinase 2 (JAK2) inhibitor, was administered via intracerebroventricular injection. Cognitive function was evaluated using the Morris water maze, while synaptic and mitochondrial structures were examined by transmission electron microscopy. Oxidative stress levels were determined using DHE staining, and the activation of the erythropoietin (ER)/ER receptor (EPOR)/JAK2 signaling pathway was analyzed through immunohistochemistry and Western blotting. To further investigate molecular mechanisms, HT22 cells were treated in vitro with either SMS-LD medicated serum alone or in combination with AG490 and then exposed to CIH for 48 h. Our results indicate that SMS-LD significantly mitigated CIH-induced cognitive impairments in mice. Specifically, SMS-LD treatment enhanced dendritic spine density, ameliorated mitochondrial dysfunction, reduced oxidative stress, and activated the EPO/EPOR/JAK2 signaling pathway. Conversely, AG490 negated SMS-LD's neuroprotective and cognitive improvement effects under CIH conditions. These findings suggest that SMS-LD's beneficial impact on cognitive impairment and synaptic and mitochondrial integrity under CIH conditions may predominantly be attributed to the activation of the EPO/EPOR/JAK2 signaling pathway.

Saccharomyces cerevisiae cellular engineering for the production of FAME biodiesel.

The unsustainable and widespread utilization of fossil fuels continues to drive the rapid depletion of global supplies. Biodiesel has emerged as one of the most promising alternatives to conventional diesel, leading to growing research interest in its production. Microbes can facilitate the de novo synthesis of a type of biodiesel in the form of fatty acid methyl esters (FAMEs). In this study, Saccharomyces cerevisiae metabolic activity was engineered to facilitate enhanced FAME production. Initially, free fatty acid concentrations were increased by deleting two acetyl-CoA synthetase genes (FAA1, FAA4) and an acyl-CoA oxidase gene (POX1). Intracellular S-adenosylmethionine (SAM) levels were then enhanced via the deletion of an adenosine kinase gene (ADO1) and the overexpression of a SAM synthetase gene (SAM2). Lastly, the S. cerevisiae strain overproducing free fatty acids and SAM were manipulated to express a plasmid encoding the Drosophila melanogaster Juvenile Hormone Acid O-Methyltransferase (DmJHAMT). Using this combination of engineering approaches, a FAME concentration of 5.79 ± 0.56 mg/L was achieved using these cells in the context of shaking flask fermentation. To the best of our knowledge, this is the first detailed study of FAME production in S. cerevisiae. These results will provide a valuable basis for future efforts to engineer S. cerevisiae strains for highly efficient production of biodiesel.

The clinical efficacy of single-hole punch excision combined with intralesional steroid injection for nodular keloid treatment: a self-controlled trial.

There are many methods to treat keloid, including various excision operations, laser, injection and radiotherapy. However, few studies have explored the effectiveness of single-hole punch excision in keloid treatment. This study aimed to investigate the efficacy and safety of lateral punch excision combined with intralesional steroid injection for keloid treatment through self-control trial. In this self-controlled trial, 50 patients meet the diagnosis of nodular keloid, and try to choose left-right symmetrical control, one skin lesion in the control group (50 skin lesionsin total) and the other in the observation group (50 skin lesions in total).The keloids in the treatment group were initially treated with punch excision combined with intralesional steroid injection, followed by injection treatment alone. Keloids in the control group received intralesional steroid injection alone. The Vancouver Scar Scale (VSS) of the keloid before and after the punch excision was evaluated; the keloid scores at different time points and the number of injection treatments required in both groups were compared, and adverse reactions were observed. The effective rate of the observation group was 86.0%, which was significantly higher than that of the control group (66.0%), and the recurrence rate of 22% was lower than that of the control group (χ2 = 4.141,63417), all of which were statistically significant (all P < 0.05). At the end of treatment, the VSS and total injection times in the observation group were significantly lower than those in the control group (t = 5.900,3.361), with statistical significance (P < 0.01). The combination of single-hole punch excision and intralesional steroid injection is an effective method to treat multiple nodular keloids, shortening the treatment course of tralesional steroid injection without obvious adverse reactions.

Chromosome-level genome assembly and characterization of the Calophaca sinica genome.

Calophaca sinica is a rare plant endemic to northern China which belongs to the Fabaceae family and possesses rich nutritional value. To support the preservation of the genetic resources of this plant, we have successfully generated a high-quality genome of C. sinica (1.06 Gb). Notably, transposable elements (TEs) constituted ~73% of the genome, with long terminal repeat retrotransposons (LTR-RTs) dominating this group of elements (~54% of the genome). The average intron length of the C. sinica genome was noticeably longer than what has been observed for closely related species. The expansion of LTR-RTs and elongated introns emerged had the largest influence on the enlarged genome size of C. sinica in comparison to other Fabaceae species. The proliferation of TEs could be explained by certain modes of gene duplication, namely, whole genome duplication (WGD) and dispersed duplication (DSD). Gene family expansion, which was found to enhance genes associated with metabolism, genetic maintenance, and environmental stress resistance, was a result of transposed duplicated genes (TRD) and WGD. The presented genomic analysis sheds light on the genetic architecture of C. sinica, as well as provides a starting point for future evolutionary biology, ecology, and functional genomics studies centred around C. sinica and closely related species.

Application and development of foam extraction technology in wastewater treatment: A review.

With the advancement of technology, wastewater treatment has become a significant challenge limiting the clean and sustainable development of chemical and metallurgical industries. Foam extraction, based on interfacial separation and mineral flotation, has garnered considerable attention as a wastewater treatment technology due to its unique physicochemical properties. Although considerable excellent accomplishments were reported, there still lacks a comprehensive summary of process features and contaminant removal mechanisms via foam extraction. According to the latest research progresses, the principles and characteristics of foam extraction technology, the classification and application of flotation reagents are systematically summarized in this work. Then comprehensively commented on the application fields and prospects of iterative flotation technology such as ion flotation, adsorption flotation and floating-extraction. The shortcomings and limitations of the current foam extraction technologies were discussed, and the feasible process intensification techniques were highlighted. This review aims to enchance the understanding of the foam extraction mechanism, and provides guidance for the selection appropriate reagents and foam extraction technologies in wastewater treatment.

Tuning the Flat Band in Bi2O2Se by Pressure to Induce Superconductivity.

The discovery of superconductivity in twisted bilayer graphene has reignited enthusiasm in the field of flat-band superconductivity. However, important challenges remain, such as constructing a flat-band structure and inducing a superconducting state in materials. Here, we successfully achieved superconductivity in Bi2O2Se by pressure-tuning the flat-band electronic structure. Experimental measurements combined with theoretical calculations reveal that the occurrence of pressure-induced superconductivity at 30 GPa is associated with a flat-band electronic structure near the Fermi level. Moreover, in Bi2O2Se, a van Hove singularity is observed at the Fermi level alongside pronounced Fermi surface nesting. These remarkable features play a crucial role in promoting strong electron-phonon interactions, thus potentially enhancing the superconducting properties of the material. These findings demonstrate that pressure offers a potential experimental strategy for precisely tuning the flat band and achieving superconductivity.

Chronic intermittent hypoxia aggravated diabetic cardiomyopathy through LKB1/AMPK/Nrf2 signaling pathway.

Chronic intermittent hypoxia (CIH) may play an important role in the development of diabetic cardiomyopathy (DCM). However, the exact mechanism of CIH-induced myocardial injury in DCM remains unclear. In vivo, the db/db mice exposed to CIH were established, and in vitro, the H9C2 cells were exposed to high glucose (HG) combined with intermittent hypoxia (IH). The body weight (BW), fasting blood glucose (FBG) and food intake were measured every two weeks. The glycolipid metabolism was assessed with the oral glucose tolerance test (OGTT) and insulin resistance (IR). Cardiac function was detected by echocardiography. Cardiac pathology was detected by HE staining, Masson staining, and transmission electron microscopy. The level of reactive oxygen species (ROS) in myocardial tissue was detected by dihydroethidium (DHE). The apoptosis was detected by TUNEL staining. The cell viability, ROS, and the mitochondrial membrane potential were detected by the cell counting kit-8 (CCK-8) assay and related kits. Western blotting was used to analyze the liver kinase B1/AMP-activated protein kinase/ nuclear factor-erythroid 2-related factor 2 (LKB1/AMPK/Nrf2) signaling pathway. CIH exposure accelerated glycolipid metabolism disorders and cardiac injury, and increased the level of cardiac oxidative stress and the number of positive apoptotic cells in db/db mice. IH and HG decreased the cell viability and the level of mitochondrial membrane potential, and increased ROS expression in H9C2 cells. These findings indicate that CIH exposure promotes glycolipid metabolism disorders and myocardial apoptosis, aggravating myocardial injury via the LKB1/AMPK/Nrf2 pathway in vitro and in vivo.

Highly selective ion precipitation flotation for ternary Co-Zn-Mn separation: Stepwise chelation capture of Co and Zn from simulated zinc hydrometallurgy wastewater.

Ion precipitation flotation technology was demonstrated to be an efficient method for the separation of valuable metals from low-concentration solution. However, the selective separation of three metals from mixing solution is a great challenge, and highly selective reagents are the key to polymetallic separation. In this work, stepwise separation of Co and Zn from the simulated zinc hydrometallurgy wastewater containing ternary Co-Zn-Mn metals by ion precipitation flotation process was proposed. It's demonstrated that organic reagents of 1-nitroso-2-naphthol (NN) and sodium dimethyldithiocarbamate (SDDC) had excellent selectivity for the capture of Co and Zn to form respective precipitate from wastewaters via the chelation reactions. After precipitation, dodecylpyridinium chloride (DPC) and tetradecyltrimethylammonium bromide (TTAB) were chosen as surfactants for the separation of Co and Zn sediments from the solution via the flotation process. The effects of solution pH, molar ratio, reaction temperature, and reaction time on the selective precipitation efficiencies of Co and Zn as well as the effects of surfactant dosage and flotation gas velocity on the flotation separation efficiencies were systematically investigated. It's demonstrated that the comprehensive recovery rates of Co, Mn, and Zn reach 98%, 90%, and 99%, respectively. After separation, oxidation calcination of the foam products was conducted to prepare high-purity Co3O4 and ZnO nanoparticles in which the organic matters were burnt out with gas emissions. The stepwise chelation capture mechanisms of Co and Zn by highly selective precipitation reagents were minutely discussed. It's demonstrated that the proposed selective stepwise precipitation and flotation method is suitable for recovery of critical metal ions from low-concentration polymetallic wastewaters.

Electron Microscope Study of the Pressure-Induced Phase Transformation and Microstructure Change of TiO2 Nanocrystals.

Microstructure transformation of materials under compression is crucial to understanding their high-pressure phase transformation. However, direct observation of the microstructure of compressive materials is a considerable challenge, which impedes the understanding of the relations among phase transformation, microstructure, and material properties. In this study, we used transmission Kikuchi diffraction and transmission electron microscopy to intuitively characterize pressure-induced phase transformation and microstructure of TiO2. We observed the changes of twin boundaries with increasing pressure and intermediate phase TiO2-I of anatase transformed into TiO2-II (α-PbO2 phase) for the first time. The following changes occur during this transformation: anatase (diameter of ∼100 nm) → anatase twins 60° along the [110] zone axis → intermediate TiO2-I twins 60° along the [010] zone axis → TiO2-II twins 90° along the [010] zone axis. These results directly reveal the crystallographic relation among these structures, enhancing our understanding of the phase transformation in TiO2 nanocrystals.

Centimeter-sized diamond composites with high electrical conductivity and hardness.

Achieving high-performance materials with superior mechanical properties and electrical conductivity, especially in large-sized bulk forms, has always been the goal. However, it remains a grand challenge due to the inherent trade-off between these properties. Herein, by employing nanodiamonds as precursors, centimeter-sized diamond/graphene composites were synthesized under moderate pressure and temperature conditions (12 GPa and 1,300 to 1,500 °C), and the composites consisted of ultrafine diamond grains and few-layer graphene domains interconnected through covalently bonded interfaces. The composites exhibit a remarkable electrical conductivity of 2.0 × 104 S m-1 at room temperature, a Vickers hardness of up to ~55.8 GPa, and a toughness of 10.8 to 19.8 MPa m1/2. Theoretical calculations indicate that the transformation energy barrier for the graphitization of diamond surface is lower than that for diamond growth directly from conventional sp2 carbon materials, allowing the synthesis of such diamond composites under mild conditions. The above results pave the way for realizing large-sized diamond-based materials with ultrahigh electrical conductivity and superior mechanical properties simultaneously under moderate synthesis conditions, which will facilitate their large-scale applications in a variety of fields.

XylR Overexpression in Escherichia coli Alleviated Transcriptional Repression by Arabinose and Enhanced Xylitol Bioproduction from Xylose Mother Liquor.

Xylitol is a polyol widely used in food, pharmaceuticals, and light industries. It is currently produced through the chemical catalytic hydrogenation of xylose and generates xylose mother liquor as a substantial byproduct in the procedure of xylose extraction. If xylose mother liquor could also be efficiently bioconverted to xylitol, the greenness and atom economy of xylitol production would be largely improved. However, xylose mother liquor contains a mixture of glucose, xylose, and arabinose, raising the issue of carbon catabolic repression in its utilization by microbial conversion. Targeting this challenge, the transcriptional activator XylR was overexpressed in a previously constructed xylitol-producing E. coli strain CPH. The resulting strain CPHR produced 16.61 g/L of xylitol in shake-flask cultures from the mixture of corn cob hydrolysate and xylose mother liquor (1:1, v/v) with a xylose conversion rate of 90.1%, which were 2.23 and 2.15 times higher than the starting strain, respectively. Furthermore, XylR overexpression upregulated the expression levels of xylE, xylF, xylG, and xylH genes by 2.08-2.72 times in arabinose-containing medium, suggesting the alleviation of transcriptional repression of xylose transport genes by arabinose. This work lays the foundation for xylitol bioproduction from xylose mother liquor.

Intensifying separation of Pb and Sn from waste Pb-Sn alloy by ultrasound-assisted acid leaching: Selective dissolution and sonochemistry mechanism.

Clean and efficient extraction and separation of precious metals from discarded Pb-Sn alloy is critical to the sustainable utilization of solid waste resources. Dense oxide layer and compact alloy texture in the waste Pb-Sn alloy pose challenges to the effective leaching process. Ultrasonic waves are demonstrated to improve separation efficiency via the favorable physical and chemical effects in solution system. In this study, ultrasound-assisted leaching technology is attempted to rapidly and selectively extract Pb from the waste Pb-Sn alloy, and gives emphasis on ultrasonic electrochemical behaviors. The Eh-pH diagrams of Sn-H2O and Pb-H2O systems were firstly analyzed to lay the selective dissolution foundation. It's indicated that oxidizing HNO3 lixiviant is suitable to realize the selective separation of Pb. Both Sn and Pb can be dissolved to ionic Sn2+ and Pb2+ in the HNO3 solution. However, Sn2+ rapidly oxidizes to Sn4+ and Sn4+ further hydrolyzes to insoluble SnO2, which will agglomerate on unreacted materials to limit internal metal leaching in conventional leaching process. Due to the vibratory stripping of oxide layer by physical effect of ultrasound, the conventional acid leaching time for Pb extraction can be halved with the ultrasound assistance. About 99.12 % Pb and only 0.1 % Sn are dissolved in ultrasound-assisted leaching under the following optimal parameters: 0.5 mol/L HNO3, leaching temperature of 80 °C, time of 30 min, liquid-to-solid ratio of 20 mL/g, and ultrasound intensity of 0.52 W/cm2. Leaching kinetics of Pb, phase transition, microstructure evolution, Pb-Sn galvanic corrosion and dissolution polarization curve were studied to determine the ultrasonic enhanced dissolution mechanism. Notably, Pb and Sn form a microcorrosion galvanic cell in which Sn acts as a cathode and is protected while the Pb undergoes intensifying corrosion as the anode giving rise to the higher Pb dissolution efficiency. Eventually, it's suggested that Pb can be rapidly extracted and separated from the waste Pb-Sn alloy during the ultrasound-assisted HNO3 leaching process via the ultrasound physical and chemical effects, especially the sonochemistry aspect of intensified spot corrosion and galvanic corrosion. The proposed ultrasonic electrochemical corrosion in this work were applicable to the extraction of valuable metals from various waste alloys through leaching method.

The Multifunctionality of Lanthanum-Strontium Cobaltite Nanopowder: High-Pressure Magnetic Studies and Excellent Electrocatalytic Properties for OER.

Simultaneous study of magnetic and electrocatalytic properties of cobaltites under extreme conditions expands the understanding of physical and chemical processes proceeding in them with the possibility of their further practical application. Therefore, La0.6Sr0.4CoO3 (LSCO) nanopowders were synthesized at different annealing temperatures tann = 850-900 °C, and their multifunctional properties were studied comprehensively. As tann increases, the rhombohedral perovskite structure of the LSCO becomes more single-phase, whereas the average particle size and dispersion grow. Co3+ and Co4+ are the major components. It has been found that LSCO-900 shows two main Curie temperatures, TC1 and TC2, associated with a particle size distribution. As pressure P increases, average ⟨TC1⟩ and ⟨TC2⟩ increase from 253 and 175 K under ambient pressure to 268 and 180 K under P = 0.8 GPa, respectively. The increment of ⟨dTC/dP⟩ for the smaller and bigger particles is sufficiently high and equals 10 and 13 K/GPa, respectively. The magnetocaloric effect in the LSCO-900 nanopowder demonstrates an extremely wide peak δTfwhm > 50 K that can be used as one of the composite components, expanding its working temperature window. Moreover, all LSCO samples showed excellent electrocatalytic performance for the oxygen evolution reaction (OER) process (overpotentials of only 265-285 mV at a current density of 10 mA cm-2) with minimal η10 for LSCO-900. Based on the experimental data, it was concluded that the formation of a dense amorphous layer on the surface of the particles ensures high stability as a catalyst (at least 24 h) during electrolysis in 1 M KOH electrolyte.

Synthesis and characterization of chitosan-copper nanocomposites and their catalytic properties for 4-nitrophenol reduction.

Biopolymer-based copper nanoparticles (CuNPs) have become an area of significant interest due to their wide-ranging applications in a variety of fields. However, there remains a challenge in tailoring their morphologies and improving their properties. In this study, CuNPs were synthesized via wet chemical reduction using sodium hypophosphite monohydrate (NaH2PO2·H2O), l-ascorbic acid and chitosan. The effect of different synthesis conditions, including reaction pH, temperature, time, concentration of NaH2PO2·H2O, l-ascorbic acid and chitosan, as well as the deacetylation degree (DD) of chitosan, on the synthesis of CuNPs was investigated. The synthesized CuNPs were characterized by various analytical techniques. The catalytic properties of synthesized CuNPs were investigated for the reduction of 4-nitrophenol (4-NP) in the presence of sodium borohydride. The synthesis-morphology-catalytic activity relationship of CuNPs was discussed. The results suggested that the morphology of CuNPs could be adjusted by controlling the synthesis conditions. Chitosan DD significantly impacts the morphology of the synthesized CuNPs. As the chitosan DD decreased from 91.8 % to 52.3 %, the average particle size of synthesized CuNPs decreased from 43.9 ± 10.6 to 17.7 ± 5.9 nm and the shape changed from anisotropy to near-sphere. CuNPs synthesized using low DD (53.2 %) chitosan (CuNPs-N3) demonstrated the highest 4-NP conversion rate of 99.1 % and reaction rate constant of 0.3540 min-1. CuNPs-N3 was thermodynamically and kinetically more feasible than CuNPs synthesized with high DD chitosan. These findings provide important insights for further designing and developing hierarchical nanostructured CuNPs catalysts for broader applications.

Relationship between ideal cardiovascular health score and perioperative acute kidney injury: A case-control study.

BACKGROUND: Maintaining ideal cardiovascular health scores (CHS) may indirectly contribute to reducing the risk of perioperative acute kidney injury (AKI), which has never been explored previously. In this study, we aimed to explore the relationship between CHS and AKI and provide new ideas for AKI prevention and treatment. METHODS: We examined the effects of CHS on the occurrence of AKI among 2783 participants from the Kailuan study, who received general anesthesia during noncardiac surgery from 2016 to 2020. The odds ratios (ORs) and 95% confidence intervals (95% CIs) for AKI were calculated by using the logistic regression. RESULTS: Among 2783 participants 187 were diagnosed with perioperative AKI. We found an inverse relationship between the CHS scores and the risk of AKI. Participants with CHS score ≥ 10 had 57% decreased risk of AKI (OR = 0.43, 95% CI = 0.23, 0.79), compared with participants with CHS score ≤ 7, especially in men (OR = 0.39, 95% CI: 0.20, 0.76). In addition, participants who never smoked, exercised frequently, and had normal blood pressure had decreased risk of AKI, with corresponding ORs (95% CIs) of 0.66 (0.47, 0.91), 0.73 (0.60, 0.92), and 0.46 (0.28, 0.75), respectively. CONCLUSIONS: CHS was strongly associated with the risk of perioperative AKI, and higher CHS scores were associated with a lower risk of AKI. Further research is needed to explore the long-term effects of achieving and maintaining an ideal CHS on AKI risk.

Rapid detection and quantification of adulteration in saffron by excitation-emission matrix fluorescence combined with multi-way chemometrics.

BACKGROUND: Saffron has gained people's attention and love for its unique flavor and valuable edible value, but the problem of saffron adulteration in the market is serious. It is urgent for us to find a simple and rapid identification and quantitative estimation of adulteration in saffron. Therefore, excitation-emission matrix (EEM) fluorescence combined with multi-way chemometrics was proposed for the detection and quantification of adulteration in saffron. RESULTS: The fluorescence composition analysis of saffron and saffron adulterants (safflower, marigold and madder) were accomplished by alternating trilinear decomposition (ATLD) algorithm. ATLD and two-dimensional principal component analysis combined with k-nearest neighbor (ATLD-kNN and 2DPCA-kNN) and ATLD combined with data-driven soft independent modeling of class analogies (ATLD-DD-SIMCA) were applied to rapid detection of adulteration in saffron. 2DPCA-kNN and ATLD-DD-SIMCA methods were adopted for the classification of chemical EEM data, first with 100% correct classification rate. The content of adulteration of adulterated saffron was predicted by the N-way partial least squares regression (N-PLS) algorithm. In addition, new samples were correctly classified and the adulteration level in adulterated saffron was estimated semi-quantitatively, which verifies the reliability of these models. CONCLUSION: ATLD-DD-SIMCA and 2DPCA-kNN are recommended methods for the classification of pure saffron and adulterated saffron. The N-PLS algorithm shows potential in prediction of adulteration levels. These methods are expected to solve more complex problems in food authenticity. © 2023 Society of Chemical Industry.

Metabolomics-based investigation of the chemical composition changes in Mongolian medicinal plant Euphorbia pekinensis before and after processing with Chebulae Fructus.

Euphorbia pekinensis (EP), known for its diuretic properties, is clinically utilized for treating conditions such as edema and malignant tumors. However, in its raw form, Euphorbia pekinensis is toxic, and oral administration of this crude medicine can lead to gastrointestinal stimulation, resulting in abdominal pain and diarrhea. In Mongolian medicine's ethnomedicinal system, a distinctive processing method called "Chebulae Fructus processing" is employed. Chebulae Fructus is used to mitigate the toxicity of EP and alleviate its purgative effects. Nevertheless, the detoxification mechanism associated with this processing method remains unexplored. It is hypothesized that processing with Chebulae Fructus may alter the chemical composition of EP, and the residual components of Chebulae Fructus within processed Chinese medicine might exhibit pharmacological antagonistic effects, thereby achieving the purpose of processing and reducing toxicity. To investigate this further, a combination of UPLC-QTOF-MS-based metabolomics technology and multivariate statistical analysis was employed to analyze and compare the chemical composition of raw and processed EP. Differential variables contributing to group separation were identified based on specific criteria, including VIP (Variable Importance in Projection) values of ≥ 1 in PLS-DA models, p-values < 0.05, and fold changes (FC) > 1.2 or < 0.8. The resulting differentially expressed features were then identified through database matching, literature review, or manual annotation. In total, 47 components were identified from the PEP samples in both positive and negative ionization modes, primarily belonging to flavonoids, terpenoids, organic acids, glycosides, and fatty acids. Among the raw EP group and PEP S4 group, 10 differential compounds were identified. Notably, one toxic terpene and one phenylpropanoid from EP were downregulated, while two bioactive components from Chebulae Fructus were upregulated in the processed group. The possible conversion reactions of these two processing Q-markers were also elucidated. The characteristic processing with Chebulae Fructus resulted in a change in the composition of this Mongolian medicine EP. Furthermore, this study provides a scientific foundation for optimizing the processing technology of EP and offers insights into the processing of other ethnomedicines with toxic properties.

Anomalous Pressure Response of Temperature-Induced Spin Transition and a Pressure-Induced Spin Transition in Two-Dimensional Hofmann Coordination Polymers.

Spin transition (ST) compounds have been extensively studied because of the changes in rich physicochemical properties accompanying the ST process. The study of ST mainly focuses on the temperature-induced spin transition (TIST). To further understand the ST, we explore the pressure response behavior of TIST and pressure-induced spin transition (PIST) of the 2D Hofmann-type ST compounds [Fe(Isoq)2M(CN)4] (Isoq-M) (M = Pt, Pd, Isoq = isoquinoline). The TISTs of both Isoq-Pt and Isoq-Pd compounds exhibit anomalous pressure response, where the transition temperature (T1/2) exhibits a nonlinear pressure dependence and the hysteresis width (ΔT1/2) exhibits a nonmonotonic behavior with pressure, by the synergistic influence of the intermolecular interaction and the distortion of the octahedral coordination environment. And the distortion of the octahedra under critical pressures may be the common behavior of 2D Hofmann-type ST compounds. Moreover, ΔT1/2 is increased compared with that before compression because of the partial irreversibility of structural distortion after decompression. At room temperature, both compounds exhibit completely reversible PIST. Because of the greater change in mechanical properties before and after ST, Isoq-Pt exhibits a more abrupt ST than Isoq-Pd. In addition, it is found that the hydrostatic properties of the pressure transfer medium (PTM) significantly affect the PIST due to their influence on spin-domain formation.

Compression Degree of Trigeminal Nerve and Type of Conflicting Vessels Determine Short- and Long-Term Complete Pain Relief in Adult Patients with Primary Trigeminal Neuralgia After Microvascular Decompression: A Three-Year Retrospective Study of 200 Adult Patients with Primary Trigeminal Neuralgia.

Objective: In this study, we aimed to explore the demographic and clinical factors that could determine short- and long-term complete pain relief (CPR) in adult patients with primary trigeminal neuralgia (PTN) after microvascular decompression (MVD) to guide clinical practice. Methods: This single-center retrospective study included adult patients with PTN who underwent MVD as their initial neurosurgical procedure in the Department of Neurosurgery at the Second Affiliated Hospital of Harbin Medical University from January 2017 to December 2019 and completed a 3-year post-surgery follow-up. Demographic and clinical information was obtained from medical records. Pain relief of adult patients with PTN at various time points after sufficient decompression of trigeminal nerve (TN) during MVD was determined and classified by the patient's subjective response and medications use. Pain relief of local patients was evaluated by outpatient follow-up at various time points, whereas that of local cases who could not return to outpatient or non-local cases was assessed through telephone or WeChat. Results: In univariate analysis, compression degree of TN and type of conflicting vessels constantly showed significant differences between the two groups at 3 months, 6 months, 1 year, 2 years, and 3 years after MVD. Compression degree of TN and type of conflicting vessels at various time points after MVD were always the related factors to CPR in logistic regression analysis, with the former having the greatest impact. The areas under the receiver operating characteristic (ROC) curve of CPR at various time points after MVD were 0.937, 0.874, 0.879, 0.864, and 0.869, respectively. Conclusion: In summary, compression degree of TN and type of conflicting vessels can determine short- and long-term CPR in adult patients with PTN after MVD.