ABSTRACT
The side reactions and dendrite growth at the interface of Zn anodes greatly limit their practical applications in Zn metal batteries. Herein, we propose a hybrid molecular sieve-based interfacial layer (denoted as Z7M3) with a hierarchical porous structure for Zn metal anodes, which contains 70 vol % microporous ZSM-5 molecular sieves and 30 vol % mesoporous MCM-41 molecular sieves. Through comprehensive molecular dynamics simulations, we demonstrate that the mesopores (â¼2.5 nm) of MCM-41 can limit the disordered diffusion of free water molecules and increase the wettability of the interfacial layer toward aqueous electrolytes. In addition, the micropores (â¼0.56 nm) of ZSM-5 can optimize the Zn2+ solvation structures by reducing the bonded water molecules, which simultaneously decrease the constraint force of solvated water molecules to Zn2+ ions, thus promoting the penetrability and diffusion kinetics of Zn2+ ions in Z7M3. The synergetic effects from the hybrid molecular sieves maintain a constant Zn2+ concentration on the surface of the Zn electrode during Zn deposition, contributing to dendrite-free Zn anodes. Consequently, Z7M3-coated Zn electrodes achieved excellent cycling stability in both half and full cells.
ABSTRACT
Objective: To analyze the antibiotic resistance profile, virulence genes, and molecular typing of Staphylococcus aureus (S. aureus) strains isolated in skin and soft tissue infections at the First Affiliated Hospital, Gannan Medical University, to better understand the molecular epidemiological characteristics of S. aureus. Methods: In 2023, 65 S. aureus strains were isolated from patients with skin and soft tissue infections. Strain identification and susceptibility tests were performed using VITEK 2 and gram-positive bacteria identification cards. DNA was extracted using a DNA extraction kit, and all genes were amplified using polymerase chain reaction. Multilocus sequence typing (MLST) was used for molecular typing. Results: In this study, of the 65 S. aureus strains were tested for their susceptibility to 16 antibiotics, the highest resistance rate to penicillin G was 95.4%. None of the staphylococcal isolates showed resistance to ceftaroline, daptomycin, linezolid, tigecycline, teicoplanin, or vancomycin. fnbA was the most prevalent virulence gene (100%) in S. aureus strains isolated in skin and soft tissue infections, followed by arcA (98.5%). Statistical analyses showed that the resistance rates of methicillin-resistant S. aureus isolates to various antibiotics were significantly higher than those of methicillin-susceptible S. aureus isolates. Fifty sequence types (STs), including 44 new ones, were identified by MLST. Conclusion: In this study, the high resistance rate to penicillin G and the high carrying rate of virulence gene fnbA and arcA of S.aureus were determine, and 44 new STs were identified, which may be associated with the geographical location of southern Jiangxi and local trends in antibiotic use. The study of the clonal lineage and evolutionary relationships of S. aureus in these regions may help in understanding the molecular epidemiology and provide the experimental basis for pathogenic bacteria prevention and treatment.
ABSTRACT
Practical aqueous zinc-ion batteries require low-cost thin zinc anodes with long-term reversible stripping/depositing. However, thin zinc anodes encounter more severe issues than thick zinc, such as dendrites and uneven stripping, resulting in subpar performance and limited lifetimes. Here, this work proposes a three-in-one zinc anode obtained by a large-scale two-step method to address the above issues. In a three-in-one zinc anode, the copper foil as an inactive current collector solves the gradual reduction of the active area when only the pure zinc as an active current collector. This work develops an automatic electroplating device that can continuously deposit a zinc layer on a conducting foil to meet the demand for zinc-coated copper foils. The sodium carboxymethylcellulose (CMC)-zinc fluoride (ZnF2) protective layer prevents direct contact between zinc and separator, and provides a uniform and sufficient supply of zinc ions. The CMC-ZnF2-coated copper foil performs up to 3000 reversible zinc deposition/stripping cycles with a cumulative capacity of 6 Ah cm-2 and an average Coulombic efficiency of 99.94%. The Zn||ZnVO cell using the three-in-one anode achieved a high capacity retention of over 70% after 15 000 cycles. The proposed three-in-one anode and the automatic electroplating device will facilitate industrialization of practical thin zinc anodes.
ABSTRACT
Organophosphorus pesticides play an important role as broad-spectrum inactivating herbicides in agriculture. Developing a method for rapid and efficient organophosphorus pesticides detection is still urgent due to the increasing concern on food safety. An organo-probe (ZDA), synthesized by purine hydrazone derivative and 2,2'-dipyridylamine derivative, was applied in sensitive recognition of Cu2+ with detection limit of 300 nM. Mechanism study via density functional theory (DFT) and job's plot experiment revealed that ZDA and Cu2+ ions form a 1:2 complex quenching the fluorescence emission. Moreover, this fluorescent complex ZDA-Cu2+ was applicable for detecting glyphosate and glufosinate ammonium following fluorescence enhancement mechanism, with detection limits of 11.26 nM and 11.5 nM, respectively. Meanwhile, ZDA-Cu2+ was effective and sensitive when it is used for pesticide detection, reaching the maximum value and stabilizing in 1 min. Finally, the ZDA-Cu2+ probe could also be tolerated in cell assay environment, implying potential bio-application.
Subject(s)
Aminobutyrates , Glyphosate , Pesticides , Organophosphorus Compounds , Fluorescence , Fluorescent Dyes , Purines , Spectrometry, Fluorescence , CopperABSTRACT
OBJECTIVE: To explore the molecular mechanism of oxymatrine (OM) by increasing the phosphorylation of ERK1/2 signal factor and blocking the transcription factors HNF1α and HNF4α expression against hepatitis B virus (HBV) antigen secretion and HBV DNA replication in HepG2.2.15 cells. STUDY DESIGN: An experimental study. Place and Duration of the Study: Department of Laboratory Medicine, First Affiliated Hospital of Gannan Medical University, Jiangxi, China, between May 2020 and December 2022. METHODOLOGY: HepG2.2.15 cells, known for stably expressing HBV particles, were utilised as a cell-based model to explore potential pathways pertaining to the OM inhibition of HBV replication. An MTT assay was utilised to measure cytotoxicity. HBsAg or HBeAg content was measured using an enzyme-linked immunosorbent assay kit. HBV DNA in cell-free culture media was examined using a fluorescent quantitative PCR kit. Real-time PCR was utilised to analyse HNF1α and HNF4α mRNA expression, whereas Western blotting was performed to evaluate HNF1α, HNF4α, and ERK1/2 protein expression. RESULTS: OM inhibited HBV DNA copy number in the cell supernatant, 3.5-kb RNA gene expression in cells, and HBsAg and HBeAg secretion. OM upregulated p-ERK1/2 protein and significantly downregulated HNF1α and HNF4α gene transcription and protein translation. CONCLUSION: OM may inhibit the replication of HBV by inducing the phosphorylation of ERK1/2 and blocking the transcription factors HNF1α and HNF4α expression that are essential for viral replication. KEY WORDS: Oxymatrine, ERK1/2, Hepatocyte nuclear factor, Anti-HBV.
Subject(s)
Hepatitis B virus , Hepatitis B , Matrines , Humans , Hepatitis B virus/genetics , Hepatitis B Surface Antigens , Hepatitis B e Antigens/metabolism , MAP Kinase Signaling System , DNA, Viral , Hepatitis B/drug therapy , Transcription Factors/metabolism , Virus Replication/physiologyABSTRACT
An electrochemical method for the decarboxylative alkylation of ß-ketoacids with phenol derivatives has been developed. The protocol was carried out in readily available unseparated cells at room temperature in the absence of catalysts and oxidants. The corresponding aryl ketones were obtained in satisfactory yields without additional electrolytes, and were easy to produce in gram-scale synthesis. Based on control experiments and cyclic voltammetry, a plausible reaction mechanism was proposed.
ABSTRACT
Hydrogen sulfide (H2S) is a gas with a toxic odor that plays an irreplaceable role in physiological activities within the mammalian body. Therefore, it is important to do the distribution and quantitative detection of H2S in mammalian cells. In this paper, a fluorescence probe (EDPH) based on purine scaffold was designed and synthesized with high sensitivity and good selectivity. H2S induced ether bond breakage in EDPH, resulting in a significant redshift of the absorption band (from 370 nm to 500 nm) with a Stokes shift of 130 nm. After the addition of H2S, the fluorescence intensity of EDPH showed a good linear correlation with the concentration of H2S, which enabled the quantitative detection of H2S with a low limit of detection (41 nM). Finally, the EDPH was applied to the cellular Hele, and the probe has good cellularity imaging capability for the detection of H2S in living systems.
Subject(s)
Fluorescent Dyes , Hydrogen Sulfide , Animals , Fluorescent Dyes/chemistry , HeLa Cells , Hydrogen Sulfide/chemistry , Mammals , Optical Imaging , PurinesABSTRACT
Hydrogen reduction reaction (HER) and corrosion limit the long-life cycle of zinc-ion batteries. However, hydrophilic separators are unable to prevent direct contact between water and electrodes, and hydrophobic separators have difficulty in transporting electrolytes. In this work, an inorganic oxide-based "hydrophobic-hydrophilic-hydrophobic" self-assembled separator system is proposed. The hydrophobic layer consists of a porous structure, which can isolate a large amount of free water to avoid HER and corrosion reactions, and can transport electrolyte by binding water. The middle hydrophilic layer acts as a storage layer consisting of the GF separator, storing large amounts of electrolyte for proper circulation. By using this structure separator, Zn||Zn symmetric cell achieve 2200 h stable cycle life at 5 mA cm-2 and 1mAh cm-2 and still shows a long life of 1800 h at 10 mA cm-2 and 1mAh cm-2. The assembled Zn||VO2 full cell displays high specific capacity and excellent long-term durability of 60.4% capacity retention after 1000 cycles at 2C. The assembled Zn||VO2 pouch full cell displays high specific capacity of 172.5mAh g-1 after 40 cycles at 0.5C. Changing the inorganic oxide materials, the hydrophobic-hydrophilic-hydrophobic structure of the separators still has excellent performance. This work provides a new idea for the engineering of water-based battery separators.
ABSTRACT
PURPOSE: To evaluate the diagnostic performance of 3.0 T unenhanced compressed-sensing sensitivity encoding (CS-SENSE) Dixon water-fat separation coronary MR angiography (CMRA) in patients with low-to-intermediate risk of coronary artery disease (CAD) and its ability to grade the severity of CAD based on Coronary Artery Disease Reporting and Data System (CAD-RADS). METHODS: A total of 55 patients who was clinically evaluated as low-to-intermediate risk of CAD were finally included to undergo both 3.0 T CS-SENSE water-fat separation CMRA and coronary computed tomography angiography (CCTA), and 11 of them also underwent X-ray coronary angiography (CAG). The severity of coronary artery disease was graded in patients who had completed both CCTA and CMRA examinations by the use of CAD-RADS reports for the patients with stable chest pain, and the diagnostic consistency between the two approaches was evaluated. Diagnostic performance of CMRA was assessed using the combination of CCTA and CAG as the reference standard for excluding or confirming CAD respectively. RESULTS: The sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV) and diagnostic accuracy of 3.0 T unenhanced water-fat separation coronary MRA were 90.0%, 95.0%, 81.8%, 97.4% and 94.0% for a patient-based analysis respectively. In comparison with CCTA, 3.0 T Dixon water-fat separation CMRA demonstrated excellent consistency in grading the severity of coronary heart disease according to CAD-RADS (0.77 for kappa value). CONCLUSION: In the group of low-to-intermediate probability for CAD, 3.0 T unenhanced CS-SENSE Dixon water-fat separation CMRA can present satisfactory diagnostic performance for the exclusion of CAD with high sensitivity and negative predictive value as well as the evaluation of grading the severity of coronary artery disease.
Subject(s)
Coronary Artery Disease , Humans , Coronary Artery Disease/diagnostic imaging , Coronary Angiography/methods , Water , Heart , Predictive Value of TestsABSTRACT
BACKGROUND: The clinical application of coronary MR angiography (MRA) combining diastole and systole imaging has never been described comprehensively in coronary artery disease (CAD) patients. We aimed to design an optimal non-contrast coronary MRA scan protocol combining diastolic and systolic imaging and to (1) evaluate its diagnostic performance for detecting significant coronary stenosis; (2) evaluate the feasibility of this protocol to noninvasively measure the coronary distensibility index (CDI). METHODS: From June 2021 to May 2022, 33 healthy volunteers and 91 suspected CAD patients scheduled for X-ray coronary angiography (CAG) were prospectively enrolled. 3T non-contrast water-fat coronary MRA was carried out twice at diastole and systole. Significant coronary stenosis was defined as a luminal diameter reduction of ≥ 50% using CAG as the reference and was evaluated as follows: (1) by coronary MRA in diastole alone; (2) by coronary MRA in systole alone; (3) by combined coronary MRA in diastole and systole. According to CAG, the patients were divided into significant CAD patients and non-significant CAD patients. The difference in CDI among participants was evaluated. RESULTS: Combined coronary MRA was completed in 31 volunteers and 76 patients. The per-patient sensitivity, specificity, and accuracy of combined coronary MRA were 97.5%, 83.3%, and 90.8%, respectively. Compared with single diastolic mode, combined coronary MRA showed equally high sensitivity but improved specificity on a per-patient basis (83.3% vs. 63.9%, adjusted P = 0.013). The CDI tested by coronary MRA decreased incrementally from healthy volunteers to non-significant and significant CAD patients. CONCLUSION: Compared with single-phase mode, 3 T non-contrast combined coronary MRA significantly improved specificity and may have potential to be a simple noninvasive method to measure CDI.
Subject(s)
Coronary Artery Disease , Coronary Stenosis , Humans , Coronary Angiography/methods , Diastole , Systole , Predictive Value of Tests , Coronary Artery Disease/diagnostic imaging , Coronary Stenosis/diagnostic imaging , Sensitivity and Specificity , Magnetic Resonance Angiography/methodsABSTRACT
Fungi are eukaryotic microorganisms found in nature, which can invade the human body and cause tissue damage, inflammatory reactions, organ dysfunctions, and diseases. These diseases can severely damage the patient's body systems and functions, leading to a range of clinical symptoms that can be life-threatening. As the incidence of invasive fungal infections has progressively increased in the recent years, a wealth of evidence has confirmed the "double-edged sword" role of fungal extracellular vesicles (EVs) in intercellular communication and pathogen-host interactions. Fungal EVs act as mediators of cellular communication, affecting fungal-host cell interactions, delivering virulence factors, and promoting infection. Fungal EVs can also have an induced protective effect, affecting fungal growth and stimulating adaptive immune responses. By integrating recent studies, we discuss the role of EVs in fungi, providing strong theoretical support for the early prevention and treatment of invasive fungal infections. Finally, we highlight the feasibility of using fungal EVs as drug carriers and in vaccine development.
ABSTRACT
This study was aimed to investigate 3.0 T unenhanced Dixon water-fat whole-heart CMRA (coronary magnetic resonance angiography) using compressed-sensing sensitivity encoding (CS-SENSE) and conventional sensitivity encoding (SENSE) in vitro and in vivo. The key parameters of CS-SENSE and conventional 1D/2D SENSE were compared in vitro phantom study. In vivo study, fifty patients with suspected coronary artery disease (CAD) completed unenhanced Dixon water-fat whole-heart CMRA at 3.0 T using both CS-SENSE and conventional 2D SENSE methods. We compared mean acquisition time, signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR) and the diagnostic accuracy between two techniques. In vitro study, CS-SENSE achieved better effectiveness between higher SNR/CNR and shorter scan times using the appropriate acceleration factor compared with conventional 2D SENSE. In vivo study, CS-SENSE CMRA had better performance than 2D SENSE in terms of the mean acquisition time, SNR and CNR (7.4 ± 3.2 min vs. 8.3 ± 3.4 min, P = 0.001; SNR: 115.5 ± 35.4 vs. 103.3 ± 32.2; CNR: 101.1 ± 33.2 vs. 90.6 ± 30.1, P < 0.001 for both). The diagnostic accuracy between CS-SENSE and 2D SENSE had no significant difference on a patient-based analysis (sensitivity: 97.3% vs. 91.9%; specificity: 76.9% vs. 61.5%; accuracy: 92.0% vs. 84.0%; P > 0.05 for each). Unenhanced CS-SENSE Dixon water-fat separation whole-heart CMRA at 3.0 T can improve the SNR and CNR, shorten the acquisition time while providing equally satisfactory image quality and diagnostic accuracy compared with 2D SENSE CMRA.
Subject(s)
Coronary Artery Disease , Magnetic Resonance Angiography , Humans , Magnetic Resonance Angiography/methods , Water , Predictive Value of Tests , Heart , Coronary Artery Disease/diagnostic imaging , Imaging, Three-Dimensional/methods , Magnetic Resonance Imaging/methods , Coronary Angiography/methodsABSTRACT
The utilization of light for therapeutic interventions, also known as phototherapy, has been extensively employed in the treatment of a wide range of illnesses, including cancer. Despite the benefits of its non-invasive nature, phototherapy still faces challenges pertaining to the delivery of phototherapeutic agents, phototoxicity, and light delivery. The incorporation of nanomaterials and bacteria in phototherapy has emerged as a promising approach that leverages the unique properties of each component. The resulting nano-bacteria biohybrids exhibit enhanced therapeutic efficacy when compared to either component individually. In this review, we summarize and discuss the various strategies for assembling nano-bacteria biohybrids and their applications in phototherapy. We provide a comprehensive overview of the properties and functionalities of nanomaterials and cells in the biohybrids. Notably, we highlight the roles of bacteria beyond their function as drug vehicles, particularly their capacity to produce bioactive molecules. Despite being in its early stage, the integration of photoelectric nanomaterials and genetically engineered bacteria holds promise as an effective biosystem for antitumor phototherapy. The utilization of nano-bacteria biohybrids in phototherapy is a promising avenue for future investigation, with the potential to enhance treatment outcomes for cancer patients.
Subject(s)
Nanostructures , Neoplasms , Photochemotherapy , Humans , Phototherapy/methods , Neoplasms/therapy , BacteriaABSTRACT
In this study, we used purine hydrazone derivatives and coumarin aldehyde to synthesize a novel fluorescent sensor (EDTP) by Schiff base reaction, which exhibited significant selective fluorescence quenching of Cu2+, and a distinct change from brilliant yellow to red is present along with the solution color. The detection limit of EDTP for Cu2+ was 109.52 nM. Job's plot experiment, density flooding theory (DFT) and 1H NMR titration experiments revealed the possible binding mechanism of EDTP to Cu2+, the probe EDTP could achieve highly detection of Cu2+ through forming a 1:1 complex. Additionally, this new fluorescent sensor EDTP-Cu2+ can be further applied in the rapid and selective detection of pesticide residues in solutions. When the EDTP-Cu2+ system was subsequently exposed to organophosphorus pesticides (glyphosate and glufosinate-ammonium), it was observed that the fluorescence was recovered and accompanied by a red to yellow color change. This may be attributed to the strong chelation of glyphosate and glufosinate-ammonium with Cu2+, leading to the dissociation of the EDTP-Cu2+ system and thus triggering the fluorescence recovery effect. The detection limits of the EDTP-Cu2+ system is 2.48 nM for glyphosate and 17.23 nM for glufosinate-ammonium, respectively. Finally, the developed sensor system has been successfully utilized image glyphosate and glufosinate-ammonium fluorescence in living cells. Purine fluorescence probes are a potential fluorescent probe for the detection of metal ions and pesticides due to their good characteristics. This study opens up a new way for the detection of fluorescent probes in pesticides.
Subject(s)
Hydrazones , Pesticides , Copper/chemistry , Organophosphorus Compounds , Fluorescent Dyes/chemistry , Spectrometry, FluorescenceABSTRACT
Aqueous Zn-ion batteries are plagued by a short lifespan caused by localized dendrites. High-concentration electrolytes are favorable for dense Zn deposition but have poor performance in batteries with glass-fiber separators. In contrast, low-concentration electrolytes can wet the separators well, ensuring the migration of zinc ions, but the dendrites grow rapidly. In this work, we propose an electrolyte gradient strategy wherein a zinc-ion concentration gradient is established from the anode to the separator, ensuring that the separator keeps a good wettability in low-concentration areas and the zinc anode achieves dendrite-free deposition in a high-concentration area. By using this strategy in a common electrolyte, zinc sulfate, a Zn||Zn symmetric cell achieves 14 000 ultralong cycles (exceeding 8 months) at 5 mA cm-2 and 1 mAh cm-2 . When the current is further increased to 20 mA cm-2 , the symmetric cell could still run for over 10 000 cycles. Assembled Zn||NVO full cells also demonstrate prominent performance. At a high current of 16 mA cm-2 , the NVO cathode with high loading (8 mg cm-2 ) still has a capacity of 58% after 1200 cycles. Overall, the gradient electrolyte strategy provides a promising approach for practical long-life Zn anodes with the advantages of simple operation and low cost.
ABSTRACT
Background: The global prevalence of carbapenem-resistant Klebsiella pneumoniae (CRKP) has become a serious challenge for nosocomial infection and attracted worldwide attention. This study explored the drug resistance genes and molecular characteristics for CRKP, providing a reference for nosocomial prevention and control. Methods: A total of 42 CRKP isolates were collected from the First Affiliated Hospital of Gannan Medical University (Ganzhou, China) from January 2018 to February 2021. The drug resistance of CRKP was tested by the VitekII Compact system. Drug resistance gene expression was detected by poly-merase chain reaction (PCR), and molecular typing was performed by pulsed-field gel electrophoresis (PFGE) and multi-locus sequence typing (MLST). Results: All the 42 CRKP isolates were multi-drug resistant. Among them, 35 isolates (83.3%) produced blaKPC-2 and 12 isolates (28.6%) produced blaNDM-1. The detection rate of blaIMP-4 and blaOXA-48 was 2.4% (1/42), respectively. Twelve isolates (28.6%) carried both blaKPC-2 and blaNDM-1, one isolate (2.4%) carried both blaKPC-2 and blaIMP-4, and one isolate (2.4%) carried blaKPC-2, blaNDM-1 and blaOXA-48. A variety of other extended-spectrum beta-lactamases (ESBLs) were also detected. All 42 isolates carried blaSHV and blaCTX-M-1, 27 isolates (64.3%) carried blaTEM and 12 isolates (28.6%) carried blaCTX-M-9. The MLST data classified the 42 CRKP isolates into 11 sequence types, mainly ST11, accounting for 61.9% (26/42), of which 92.3% of isolates (24/26) carrying blaKPC-2. The PFGE results demonstrated that the 42 CRKP isolates could be divided into 20 clusters A-T, with cluster A (26.2%, 11/42) and cluster H (21.4%, 9/42) dominating, which were all ST11. Conclusion: The CRKP isolates were severely multi-drug resistant, and the main resistant gene was blaKPC-2 production, carrying multiple ESBLs genes simultaneously. The MLST and PFGE revealed that the ST11-blaKPC-2 Klebsiella pneumoniae was the main clonotype. Our findings may offer help to antibiotics selection and nosocomial infection prevention and control.
ABSTRACT
The Zn anode suffers from severe dendrite growth and side reactions, which restrict its development in the realm of large-scale energy storage. Herein, in this study, we propose a method to create surface-microcracks in a Zn foil by 200 MPa cold isostatic pressing. The proposed pressing method can avoid the surface tip effect of Zn, and creates a subtly surface-microcracked zinc structure, providing more zinc ion transport channels, thereby effectively alleviating the dendrite growth and side reactions during the repeated Zn plating and stripping. Benefiting from these advantages, the 200 MPa ZnâZn symmetric cell can achieve a long cycle life (1525 h) of 1 mA h cm-2 at 2 mA cm-2. The 200 MPa ZnâVO2 full cell can still maintain a capacity of 110 mA h g-1 after 1000 cycles at 0.1 A g-1. In addition, assembled pouch cells also show excellent cycling stability. The proposed cold isostatic pressing method is compatible with large-scale production applications and provides an effective strategy for realizing high-performance zinc anodes for zinc-ion batteries.
ABSTRACT
Garnet electrolytes, possessing high ionic conductivity (10-4 -10-3 S cm-1 at room temperature) and excellent chemical/electrochemical compatibility with lithium metal, are expected to be used in solid-state lithium metal batteries. However, the poor solid-solid interfacial contact between lithium and garnet leads to high interfacial resistance, reducing the battery power capability and cyclability. Garnet electrolytes are commonly believed to be intrinsically lithiophilic, and lithiophobic Li2 CO3 on the garnet surface accounted for the poor interfacial contact. Here, it is proposed that the interfacial lithiophobicity/lithiophilicity of garnets (LLZO, LLZTO) can be transformed above a temperature of ≈380 °C. This transition mechanism is also suitable for other materials such as Li2 CO3 , Li2 O, stainless steel, and Al2 O3 . By using this transition mechanism, uniform and even lithium can be strongly bonded no-surface-treated garnet electrolytes with various shapes. The Li-LLZTO interfacial resistance can be reduced to ≈3.6 Ω cm2 and sustainably withstood lithium extraction and insertion for up to 2000 h at 100 µA cm-2 . This high-temperature lithiophobicity/lithiophilicity transition mechanism can help improve the understanding of lithium-garnet interfaces and build practical lithium-garnet solid-solid interfaces.
ABSTRACT
The FeS2 has abundant reserves and a high specific capacity (894 mAh g-1 ), commonly used to fabricate Li-FeS2 primary batteries, like LiMx -FeS2 thermal batteries (working at ≈500 °C). However, Li-FeS2 batteries struggle to function as rechargeable batteries due to serious issues such as pulverization and polysulfide shuttling. Herein, highly reversible solid-state Li-FeS2 batteries operating at 300 °C are designed. Molten salt-based FeS2 slurry cathodes address the notorious electrode pulverization problem by encapsulating pulverized particles in time with e- and Li⺠flow conductors. In addition, the solid electrolyte LLZTO tube serves as a hard separator and fast Li+ channel, effectively separating the molten electrodes to construct a liquid-solid-liquid structure instead of the solid-liquid-solid structure of LiMx -FeS2 thermal batteries. Most importantly, these high-temperature Li-FeS2 solid-state batteries achieve FeS2 conversion to Li2 S and Fe at discharge and further back to FeS2 at charge, unlike room-temperature Li-FeS2 batteries where FeS and S act as oxidation products. Therefore, these new-type Li-FeS2 batteries have a lower operating temperature than Li-FeS2 thermal batteries and perform highly reversible electrochemical reactions, which can be cycled stably up to 2000 times with a high specific capacity of ≈750 mAh g-1 in the prototype batteries.
ABSTRACT
Reductive biodegradation by microorganisms has been widely explored for detoxifying recalcitrant contaminants; however, the biodegradation capacity of microbes is limited by the energy level of the released electrons. Here, we developed a method to self-assemble Shewanella oneidensis-CdS nanoparticle hybrids with significantly improved reductive biodegradation capacity and constructed a living material by encapsulating the hybrids in hydrogels. The material confines the nano-bacteria hybrids and protects them from environmental stress, thus improving their recyclability and long-term stability (degradation capacity unhindered after 4 weeks). The developed living materials exhibited efficient photocatalytic biodegradation of various organic dyes including azo and nitroso dyes. This study highlights the feasibility and benefits of constructing self-assembled nano-bacteria hybrids for bioremediation and sets the stage for the development of novel living materials from nano-bacteria hybrids.