ABSTRACT
The development of highly active, durable, and low-cost metal-free catalysts for the photocatalytic CO2 reduction reaction (CO2RR) is an efficient and environmentally friendly solution to address significant problems like global warming and high energy demand. In the present study, we have demonstrated the design and synthesis of a donor-acceptor based conjugated microporous polymer (CMP), TPA-GFP, by integrating an electron donor, tris(4-ethynylphenyl)amine (TPA), with a green fluorescent protein chromophore analogue (Z)-4-(2-hydroxy-3,5-diiodobenzylidene)-1-(4-iodophenyl)-2-methyl-1H-imidazol-5(4H)-one (o-HBDI-I3) (GFP). In comparison to nondonor 1,3,5-triethynylbenzene (TEB) based TEB-GFP CMP, photocatalytic CO2 reduction using donor-acceptor based TPA-GFP CMP displays a 3-fold increment of CO production yield with a maximum CO yield of 1666 µmol g-1 at 12 h. Further, the CO selectivity increases significantly from a mere 54% in TEB-GFP to an impressive 95% in TPA-GFP. The impressive CO2 reduction efficiency and selectivity for TPA-GFP can be attributed to the efficient light-harvesting capability and facile charge separation and migration through donor-acceptor building units of the CMP. The mechanistic aspect of the photocatalytic CO2 reduction process is explored using in situ DRIFTS and DFT calculation, and a plausible photocatalytic mechanism is proposed.
ABSTRACT
Separating carbon dioxide (CO2) from acetylene (C2H2) is one of the most critical and complex industrial separations due to similarities in physicochemical properties and molecular dimensions. Herein, we report a novel Ni-based three-dimensional framework {[Ni4(µ3-OH)2(µ2-OH2)2(1,4-ndc)3](3H2O)}n (1,4-ndc = 1,4-naphthalenedicarboxylate) with a one-dimensional pore channel (3.05 × 3.57 Å2), that perfectly matches with the molecular size of CO2 and C2H2. The dehydrated framework shows structural transformation, decorated with an unsaturated Ni(ii) centre and pendant oxygen atoms. The dynamic nature of the framework is evident by displaying a multistep gate opening type CO2 adsorption at 195, 273, and 298 K, but not for C2H2. The real time breakthrough gas separation experiments reveal a rarely attempted inverse CO2 selectivity over C2H2, attributed to open metal sites with a perfect pore aperture. This is supported by crystallographic analysis, in situ spectroscopic inspection, and selectivity approximations. In situ DRIFTS measurements and DFT-based theoretical calculations confirm CO2 binding sites are coordinatively unsaturated Ni(ii) and carboxylate oxygen atoms, and highlight the influence of multiple adsorption sites.
ABSTRACT
Modern technology demands miniaturization of electronic components to build small, light, and portable devices. Hence, discovery and synthesis of new non-toxic, low cost, ultra-thin ferroelectric materials having potential applications in various electronic and optoelectronic devices are of paramount importance. However, achieving room-temperature ferroelectricity in two dimensional (2D) ultra-thin systems remains a major challenge as conventional three-dimensional ferroelectric materials lose their ferroelectricity when the thickness is brought down below a critical value owing to the depolarization field. Herein, we report room-temperature ferroelectricity in ultra-thin single-crystalline 2D nanosheets of Bi2O2S synthesized by a simple, rapid, and scalable solution-based soft chemistry method. The ferroelectric ground state of Bi2O2S nanosheets is confirmed by temperature-dependent dielectric measurements as well as piezoelectric force microscopy and spectroscopy. High resolution transmission electron microscopy analysis and density functional theory-based calculations suggest that the ferroelectricity in Bi2O2S nanosheets arises due to the local distortion of Bi2O2 layers, which destroys the local inversion symmetry of Bi2O2S.
ABSTRACT
The synthesis of covalent organic frameworks (COFs) at bulk scale require robust, straightforward, and cost-effective techniques. However, the traditional solvothermal synthetic methods of COFs suffer low scalability as well as requirement of sensitive reaction environment and multiday reaction time (2-10â days) which greatly restricts their practical application. Here, we report microwave assisted rapid and optimized synthesis of a donor-acceptor (D-A) based highly crystalline COF, TzPm-COF in second (10â sec) to minute (10â min) time scale. With increasing the reaction time from seconds to minutes crystallinity, porosity and morphological changes are observed for TzPm-COF. Owing to visible range light absorption, suitable band alignment, and low exciton binding energy (Eb=64.6â meV), TzPm-COF can efficaciously produce superoxide radical anion (O2 .-) after activating molecular oxygen (O2) which eventually drives aerobic photooxidative amidation reaction with high recyclability. This photocatalytic approach works well with a variety of substituted aromatic aldehydes having electron-withdrawing or donating groups and cyclic, acyclic, primary or secondary amines with moderate to high yield. Furthermore, catalytic mechanism was established by monitoring the real-time reaction progress through in situ diffuse reflectance infrared Fourier transform spectroscopic (DRIFTS) study.
ABSTRACT
The energy barrier to dissociate neutral water has been lowered by the differential intermediate binding on the charge-modulated metal centers of Co85Mo15 sheets supported on Ni-foam (NF), where the overpotential for hydrogen evolution reaction (HER) in 1â M phosphate buffer solution (PBS) is only 50±9â mV at -10â mA cm-2. It has a turnover frequency (TOF) of 0.18â s-1, mass activity of 13.2â A g-1 at -200â mV vs. reversible hydrogen electrode (RHE), and produces 16â ml H2 h-1 at -300â mV vs. RHE, more than double that of 20 % Pt/C. The Moδ+ and Coδ- sites adsorb OH*, and H*, respectively, and the electron injection from Co to H-O-H cleaves the O-H bond to form the Mo-OH* intermediate. Operando spectral analyses indicate a weak H-bonded network for facilitating the H2O*/OH* transport, and a potential-induced reversal of the charge density from Co to the more electronegative Mo, because of the electron withdrawing Co-H* and Mo-OH* species. Co85Mo15/NF can also drive the complete electrolysis of neutral water at only 1.73â V (10â mA cm-2). In alkaline, and acidic media, it demonstrates a Pt-like HER activity, accomplishing -1000â mA cm-2 at overpotentials of 161±7, and 175±22â mV, respectively.
ABSTRACT
The hydrogels, formed by self-assembly of predesigned, discrete metal-organic cubes (MOCs), have emerged as a new type of functional soft material whose diverse properties are yet to be explored. Here, we explore the proton conductivity of a MOC-based supramolecular porous framework {(Me2NH2)12[Ga8(ImDC)12]·DMF·29H2O} (1) (ImDC = 4,5-imidazole dicarboxylate) and derived hydrogel (MOC-G1). The intrinsic charge-assisted H-bonded (between anionic MOC {[Ga8(ImDC)12]12-} and dimethylammonium cations) framework 1 exhibits an ambient condition proton conductivity value of 2.3 × 10-5 S cm-1 (@40% RH) which increases with increasing temperature (8.2 × 10-4 S cm-1 at 120 °C and 40% RH) and follows the Grotthuss type of mechanism of proton conduction. Self-assembly of the MOCs in the presence of ammonium cations, as molecular binders, resulted in a hydrogel (MOC-G1) that shows directional H-bonded 1D nanotubular morphology. While guest water molecules are immensely important in deciding the proton conductivity of both 1 and MOC-G1, the presence of additional proton carriers, such as DMA and ammonium cations, resulted in at least 1 order increment in the proton conductivity of the latter (1.8 × 10-2 S cm-1) than the former (1.4 × 10-3 S cm-1) under 25 °C and 98% RH condition. The values of proton conductivity of 1 and MOC-G1 are comparable with those of the best proton conduction reports in the literature. This work may pave the way for the development of proton conductors with unique architecture and conductivity requisite for the state-of-the-art technologies by selecting appropriate MOC and molecular binders.
ABSTRACT
Efficient solar-driven syngas production (CO+H2 mixture) from CO2 and H2O with a suitable photocatalyst and fundamental understanding of the reaction mechanism are the desired approach towards the carbon recycling process. Herein, we report the design and development of an unique COF-topological quantum material nano-heterostructure, COF@TI with a newly synthesized donor-acceptor based COF and two dimensional (2D) nanosheets of strong topological insulator (TI), PbBi2Te4. The intrinsic robust metallic surfaces of the TI act as electron reservoir, minimising the fast electron-hole recombination process, and the presence of 6s2 lone pairs in Pb2+ and Bi3+ in the TI helps for efficient CO2 binding, which are responsible for boosting overall catalytic activity. In variable ratio of acetonitrile-water (MeCN : H2O) solvent mixture COF@TI produces syngas with different ratios of CO and H2. COF@TI nano-heterostructure enables to produce higher amount of syngas with more controllable ratios of CO and H2 compared to pristine COF. The electron transfer route from COF to TI was realized from Kelvin probe force microscopy (KPFM) analysis, charge density difference calculation, excited state lifetime and photoelectrochemical measurements. Finally, a probable mechanistic pathway has been established after identifying the catalytic sites and reaction intermediates by in situ DRIFTS study and DFT calculation.
ABSTRACT
Nature's design of biological ion channels that demonstrates efficient gating and selectivity brings to light a very promising model to mimic and design for achieving selective and tunable ion transport. Functionalized nanopores that permit modulation of the pore wall charges are a compelling approach to gain control over the ion transport mechanism through the pores. This makes way for employing a noncovalent supramolecular approach for attaining charge reversal of the MOF pore walls using donor-acceptor pairs that can demonstrate strong charge transfer interactions. Herein, robust Zr4+-based mesoporous MOF-808 was postsynthetically modified into an anion-selective nanochannel (MOF-808-MV) by modification with dicationic viologen-based motifs. Charge modulation and even reversal of the MOF-808-MV pore walls were then explored taking advantage of strong charge transfer interactions between the grafted dicationic viologen acceptor moieties and anionic, π-electron-rich donor guest molecules such as pyranine (PYR) and tetrathiafulvalene tetrabenzoic acid (TTF-TA). Tunability of the MOF pore charge from positive to neutral to negative was achieved via simple methodologies such as diffusion control in case of guest molecule like PYR and by pH modulation for pH-responsive guest like TTF-TA. This results in a concomitant modulation in the selectivity of the nanochannel, rendering it from anion-selective to ambipolar to cation-selective. Furthermore, as a real-time application of this ion channel, Na+ ion conductivity (σ = 3.5 × 10-5 S cm-1) was studied at ambient temperature.
ABSTRACT
Integrating photoactive π-chromophoric guest molecules inside the MOF nanopore can result in the emergence of light-responsive features, which in turn can be utilized for developing photoactive materials with inherent properties of MOF. Herein, we report the confining of π-chromophoric tetracene (TET) molecules inside the nanospace of postmodified Zr-MOF-808 (Zr-MOF) with MBA molecules (MBA = 2-(5'-methyl-[2,2'-bipyridine]-5-yl)acetic acid) for effectively utilizing its light-harvesting properties toward photocatalytic CO2 reduction. The confinement of the TET molecules as a photosensitizer and the covalent grafting of a catalytically active [Re(MBA)(CO)3Cl] complex, postsynthetically, result in a single integrated catalytic system named Zr-MBA-TET-Re-MOF. Photoreduction of CO2 over Zr-MBA-TET-Re-MOF showed the evolution of 805 µmol g-1 CO with 99.9% selectivity after 10 h of continuous visible light irradiation in water without any additional sacrificial electron donor and having the apparent quantum efficiency of 1.3%. In addition, the catalyst demonstrated an appreciable activity even under direct sunlight irradiation in aqueous medium with a maximum production of 362.7 µmol g-1 CO, thereby mimicking artificial photosynthesis. Moreover, electron transfer from TET to the catalytic center was supported by the formation of photoinduced TET radical cation, as inferred from in situ UV-vis spectra, electron paramagnetic resonance (EPR) analysis, and transient absorption (TA) studies. Additionally, the in situ diffuse reflectance infrared Fourier transform (DRIFT) measurements support that the photoreduction of CO2 to CO proceeds via *COOH intermediate formation. The close proximity of the light-harvesting molecule and catalytic center facilitated facile electron transfer from the photosensitizer to the catalyst during the CO2 reduction.
ABSTRACT
Porous, supramolecular structures exhibit preferential encapsulation of guest molecules, primarily by means of differences in the order of (noncovalent) interactions. The encapsulation preferences can be for geometry (dimension and shape) and the chemical nature of the guest. While geometry-based sorting is relatively straightforward using advanced porous materials, designing a "chemical nature" specific host is not. To introduce "chemical specificity", the host must retain an accessible and complementary recognition site. In the case of a supramolecular, porous coordination polymer (PCP) [Zn(o-phen)(ndc)] (o-phen: 1,10-phenanthroline, ndc: 2,6-naphthalenedicarboxylate) host, equipped with an adaptable recognition pocket, we have discovered that the preferential encapsulation of a haloaromatic isomer is not only for dimension and shape, but also for the "chemical nature" of the guest. This selectivity, i.e., preference for the dimension, shape and chemical nature, is not guided by any complementary recognition site, which is commonly required for "chemical specificity". Insights from crystal structures and computational studies unveil that the differences in the different types of noncovalent host-guest interaction strengths, acting in a concerted fashion, yield the unique selectivity.
ABSTRACT
In the quest for renewable fuel production, the selective conversion of CO2 to CH4 under visible light in water is a leading-edge challenge considering the involvement of kinetically sluggish multiple elementary steps. Herein, 1-pyrenebutyric acid is post-synthetically grafted in a defect-engineered Zr-based metal organic framework by replacing exchangeable formate. Then, methyl viologen is incorporated in the confined space of post-modified MOF to achieve donor-acceptor complex, which acts as an antenna to harvest visible light, and regulates electron transfer to the catalytic center (Zr-oxo cluster) to enable visible-light-driven CO2 reduction reaction. The proximal presence of the charge transfer complex enhances charge transfer kinetics as realized from transient absorption spectroscopy, and the facile electron transfer helps to produce CH4 from CO2. The reported material produces 7.3 mmol g-1 of CH4 under light irradiation in aqueous medium using sacrificial agents. Mechanistic information gleans from electron paramagnetic resonance, in situ diffuse reflectance FT-IR and density functional theory calculation.
ABSTRACT
The efficient electrochemical conversion and storage devices can be boosted by the development of cost-effective and durable electrocatalysts. However, simultaneous in-depth understanding of the reaction mechanism is also required. Herein, we report the preparation, characterization, and electrochemical activities of bimetallic NixCo1-x NPs and core-shell NixCo1-x@NixCo1-xO NPs stabilized on N-doped carbon nanotubes (NCNTs). The electrocatalyst is derived from a bimetallic MOF {[Ni0.5Co0.5(bpe)2(N(CN)2)](N(CN)2)·(5H2O)}n (1) via pyrolysis followed by calcination. Pyrolysis of the bimetallic MOF gives rise to bimetallic nanoparticles stabilized on NCNTs, which, when subsequently calcined, leads to the formation of a core-shell structure with a semiconducting oxide shell (NixCo1-xO) encapsulating the NixCo1-x bimetallic NP core. Detailed evaluation of the electrocatalytic performance of NixCo1-x@NixCo1-xO/NCNT proves its worth as a bifunctional catalyst with 380 mV overpotential for oxygen evolution reaction at 10 mA cm-2 current density and 0.87 V (vs RHE) onset for oxygen reduction reaction in the alkaline medium. Additionally, the prepared electrocatalyst efficiently catalyzes the hydrogen evolution reaction with a nominal overpotential of 74 mV (vs RHE) for reaching 10 mA cm-2 current density in acidic medium. The practical applicability of this catalyst is further upheld in the fabrication of a zinc-air battery having high specific capacity with high round-trip efficiency and adequate cycle life. DFT calculations establish that the structure of NixCo1-x@NixCo1-xO/NCNT is crucial for its electrochemical activity since it has the threefold advantages of cooperative charge transfer from Co to Ni, synergistic relationship between the conductive alloy core and semiconducting oxide shell, and a highly conductive N-doped CNT matrix.
ABSTRACT
Exploration of different chemical systems for photocatalytic CO2 reduction by using sunlight en route to the achievement of artificial photosynthesis stems from global warming and the energy crisis. In this work, we have covalently grafted the molecular photosensitizer (PS) [Ru(MBA)(bpy)2]Cl2 (bpy: 2,2'-bipyridine) and the catalyst [Mn(MBA)(CO)3Br] inside the Zr-MOF-808 (Zr-MOF) nanopore postmodified with 2-(5'-methyl-[2,2'-bipyridine]-5-yl)acetic acid (H-MBA) and developed a single integrated system named Zr-MBA-Ru/Mn-MOF for the CO2 reduction reaction (CO2RR). Zr-MBA-Ru/Mn-MOF is found to be active toward CO2-to-CO conversion, with a maximum production of 1027 µmol g-1 after 26 h of reaction having >99% selectivity in the aqueous medium without any additional hole scavenger. The catalyst with direct sunlight in the aqueous medium is equally active for CO production, thus mimicking the natural photosynthetic process. We have performed an in situ diffuse reflectance Fourier transform infrared spectroscopy (FTIR) (DRIFT) study to unveil the electron transfer from the PS to the catalytic center during CO2 reduction by monitoring the changes in the carbonyl stretching frequency in the [Mn(MBA)(CO)3Br] center and correlated with the density functional theory (DFT) calculations. Additionally, we have performed in situ DRIFT spectroscopy to understand the reaction mechanism for the CO2-to-CO conversion.
ABSTRACT
Metal-organic frameworks (MOFs, also known as porous coordination polymers or PCPs) are a novel class of crystalline porous material. The tailorable porous structure, in terms of size, geometry and function, has attracted the attention of researchers across all disciplines of materials science. One of the many exciting aspects of MOFs is that through directional and reversible coordination bonding, organic linkers (chromophores with metal-coordinating functional groups) and metal ions (and clusters) can be spatially organized in a preconceived geometry. The well-defined spatial geometry of the metals and linkers is very advantageous for optoelectronic functions (solar cells, light-emitting diodes, photocatalysts) of the materials. This feature article evaluates the scope of charge transfer (CT) interactions in MOFs, involving the organic linkers and metal ion or cluster components. Irrespective of the type (size, shape, electronic property) of organic chromophores involved, MOFs provide an insightful path to design and make the CT process efficient. The selected examples of MOFs with CT characteristics do not only illustrate the design principles but render a pathway towards understanding the complex photophysical processes and implementing those for future optoelectronic and catalytic applications.
ABSTRACT
There has been a widespread interest in developing self-assembled porphyrin nanostructures to mimic nature's light-harvesting processes. Herein, porphyrin-based coordination polymer gel (CPG) has been developed as a "soft" photocatalyst material for hydrogen (H2) production from water under visible light. The CPG offers a hierarchical nanofibrous network structure obtained through self-assembly of a terpyridine alkyl-amide appended porphyrin (TPY-POR)-based low molecular weight gelator with ruthenium ions (RuII) and produces H2 with a rate of 5.7 mmol g-1 h-1 in the presence of triethylamine (TEA) as a sacrificial electron donor. Further, the [Fe2(bdt)(CO)6] (dbt = 1,2-benzenedithiol) cocatalyst, which can mimic the activity of iron hydrogenase, is coassembled in the CPG and shows remarkable improvement in H2 evolution (catalytic activity; rate â¼10.6 mmol g-1 h-1 and turnover number â¼1287). The significant enhancement in catalytic activity was supported by several controlled experiments, including femtosecond transient absorption (TA) spectroscopy and also DFT calculation. The TA study supported the cascade electron transfer process from porphyrin core to [Ru(TPY)2]2+ center, and subsequently, the electron transfers to the cocatalyst [Fe2(bdt)(CO)6] for H2 production.
ABSTRACT
In recent years, extensive research has been directed toward the successful preparation of nanoscale luminescent thermometers with high sensitivities operative in a broad temperature range. To achieve this goal, we have devised a unique design and facile multistep synthesis of Zr-ctpy-NMOF@TbxEuy compounds by confining Ln-complexes (Ln = Eu3+/Tb3+) into a robust nanoscale Zr-NMOF (MOF-808) via postsynthetic modification. Covalent grafting of 4-(4'-carboxyphenyl)-2,2':6,2â³terpyridine ligand (ctpy) with a high triplet state energy and corresponding immobilization of bimetallic Ln3+ ions resulted in yellow light-emitting Zr-ctpy-NMOF@Tb1.66Eu0.14 to achieve a sensitivity of 5.2% K-1 (thermal uncertainty dT < 1 K) operative over a broad temperature range of 25-400 K. To defeat the odds related to the detection of minute temperature changes using luminescent materials, we prepared a white light-emitting Zr-ctpy-NMOF@Tb1.4Eu0.31 that showed temperature-modulated multispectrum chromism where the color drastically changes from green (at 25 K, Q.Y.: 20.21%) to yellowish-green (at 200 K, Q.Y.: 23.13%) to white (at 300 K, Q.Y.: 26.4%) to orange (at 350 K, Q.Y.: 26.93%) and finally red (at 400 K, Q.Y.: 28.2%) with a high energy transfer efficiency of 49.8%, which is further supported by electron-phonon coupling.
ABSTRACT
Light hydrocarbon separation is considered one of the most industrially challenging and desired chemical separation processes and is highly essential in polymer and chemical industries. Among them, separating ethylene (C2H4) from C2 hydrocarbon mixtures such as ethane (C2H6), acetylene (C2H2), and other natural gas elements (CO2, CH4) is of paramount importance and poses significant difficulty. We demonstrate such separations using an Al-MOF synthesised earlier as a non-porous material, but herein endowed with hierarchical porosity created under microwave conditions in an equimolar water/ethanol solution. The material possessing a large surface area (793 m2 g-1) exhibits an excellent uptake capacity for major industrial hydrocarbons in the order of C2H2 > C2H6 > CO2 > C2H4 > CH4 under ambient conditions. It shows an outstanding dynamic breakthrough separation of ethylene (C2H4) not only for a binary mixture (C2H6/C2H4) but also for a quaternary combination (C2H4/C2H6/C2H2/CO2 and C2H4/C2H6/C2H2/CH4) of varying concentrations. The detailed separation/purification mechanism was unveiled by gas adsorption isotherms, mixed-gas adsorption calculations, selectivity estimations, advanced computer simulations such as density functional theory (DFT), grand canonical Monte Carlo (GCMC) and ab initio molecular dynamics (AIMD), and stepwise multicomponent dynamic breakthrough experiments.
ABSTRACT
Insights into developing innovative routes for the stabilization of photogenerated charge-separated states by suppressing charge recombination in photocatalysts is a topic of immense importance. Herein, we report the synthesis of a metal-organic framework (MOF)-based composite where CdS nanoparticles (NPs) are confined inside the nanosized pores of Zr4+-based MOF-808, namely, CdS@MOF-808. Anchoring l-cysteine into the nanospace of MOF-808 via postsynthetic ligand exchange allows the capture of Cd2+ ions from their aqueous solution, which are further utilized for in situ growth of CdS NPs inside the nanosized MOF pores. The formation of CdS@MOF-808 opens up a possibility for visible-light photocatalysis as CdS NPs (1-2 nm) are a well-studied semiconductor system with a band gap of â¼2.6 eV. The confinement of the CdS NPs inside the MOF pores, close to the Zr4+ cluster, opens up a shorter electron transfer route from CdS to the catalytic Zr4+ cluster and shows a high rate of H2 evolution (10.41 mmol g-1 h-1) from water with a loading of 3.56 wt % CdS. In contrast, a similar composite in which CdS NPs are stabilized on the external surface of MOF-808 reveals poor activity (0.15 mmol g-1 h-1). CdS NPs stabilized on the MOF-808 surface show slower and inefficient electron transfer kinetics compared to CdS stabilized inside the nanospace of the MOF, as realized by the transient absorption measurements. Therefore, this work unveils the critical role of stabilizing the photosensitizer NPs in close proximity of the catalytic sites in MOF systems towards developing highly efficient H2 evolution photocatalysts.
ABSTRACT
Oligo-(p-Phenyleneethynylenes) (OPEs) have garnered widespread interest over the past three decades due to their excellent opto-electronic properties. However, the chief focus has been on the use of mainly small molecules or polymeric systems for the study of their structural diversity in opto-electronic applications. Recently, researchers have started delving deeper into their utility in material applications. Purely organic materials such as supramolecular polymers, self-assembled nanostructures, nanostructured organogels and single-crystalline materials derived from OPEs have already been developed and researched. Chirality has also been introduced into these systems. Additionally, these have shown physical properties such as polymorphism, liquid crystallinity, melt formation, mechanochromism, etc. All these materials have also shown excellent luminescence properties with high quantum yield and some have even shown energy harvesting properties. There have also been sporadic reports on OPE linker based hybrid systems such as metallogels and metal-organic framework (MOF) structures where structural analysis reveals the origin of tunable emission in these materials. Furthermore, by innovative structural design, unexplored properties of OPEs such as water repellency, bioimaging, drug delivery, photocatalysis, energy transfer, nanomorphology control, photoconductivity, and colour tunability could be achieved. This feature article will, therefore, encompass a detailed discussion on the development of this field as well as the analysis of the properties realized in OPE derived self-assembled supramolecular materials. The main focus will be on the following classes of materials: soft supramolecular materials, crystalline supramolecular π-systems, nanoscale metal-organic frameworks (NMOFs) and bulk metal-organic frameworks (MOFs) and how their application horizon has been expanded by integrating OPEs into their structures.