Strain Measurement within an Intact Swine Periodontal Ligament.

The periodontal ligament (PDL) provides support, proprioception, nutrition, and protection within the tooth-PDL-bone complex (TPBC). While understanding the mechanical behavior of the PDL is critical, current research has inferred PDL mechanics from finite element models, from experimental measures on complete TPBCs, or through direct measurement of isolated PDL sections. Here, transducers are used in an attempt to quantify ex vivo PDL strain. In-fiber Bragg grating (FBG) sensors are small flexible sensors that can be placed within an intact TPBC and yield repeatable strain measurements from within the PDL space. The objective of this study was to determine: 1) if the FBG strain measured from the PDL space of intact swine premolars ex vivo was equivalent to physical PDL strains estimated through finite element analysis and 2) if a change in FBG strain could be linearly related to a change in finite element strain under variable tooth displacement, applied to an intact swine TPBC. Experimentally, individual TPBCs were subjected to 2 displacements (n = 14). The location of the FBG was determined from representative micro-computed tomography images. From a linear elastic finite element model of a TPBC, the strain magnitudes at the sensor locations were recorded. An experimental ratio (i.e., FBG strain at the first displacement divided by the FBG strain at the second displacement) and a finite element ratio (i.e., finite element strain at the first displacement divided by the finite element strain at the second displacement) were calculated. A linear regression model indicated a statistically significant relationship between the experimental and finite element ratio (P = 0.017) with a correlation coefficient (R2) of 0.448. It was concluded that the FBG sensor could be used as a measure for a change in strain and thus could be implemented in applications where the mechanical properties of an intact PDL are monitored over time.

Alveolar Bone Segmentation in Intraoral Ultrasonographs with Machine Learning.

The use of intraoral ultrasound imaging has received great attention recently due to the benefits of being a portable and low-cost imaging solution for initial and continuing care that is noninvasive and free of ionizing radiation. Alveolar bone is an important structure in the periodontal apparatus to support the tooth. Accurate assessment of alveolar bone level is essential for periodontal diagnosis. However, interpretation of alveolar bone structure in ultrasound images is a challenge for clinicians. This work is aimed at automatically segmenting alveolar bone and locating the alveolar crest via a machine learning (ML) approach for intraoral ultrasound images. Three convolutional neural network-based ML methods were trained, validated, and tested with 700, 200, and 200 images, respectively. To improve the robustness of the ML algorithms, a data augmentation approach was introduced, where 2100 additional images were synthesized through vertical and horizontal shifting as well as horizontal flipping during the training process. Quantitative evaluations of 200 images, as compared with an expert clinician, showed that the best ML approach yielded an average Dice score of 85.3%, sensitivity of 88.5%, and specificity of 99.8%, and identified the alveolar crest with a mean difference of 0.20 mm and excellent reliability (intraclass correlation coefficient ≥0.98) in less than a second. This work demonstrated the potential use of ML to assist general dentists and specialists in the visualization of alveolar bone in ultrasound images.

Viscoelastic response of the midpalatal suture during maxillary expansion treatment.

OBJECTIVES: The viscoelastic response of the midpalatal suture during maxillary expansion treatment has been sparsely studied. The aim of our study was to use viscoelastic models to investigate the effect of appliance mechanics on sutural tissue. MATERIALS AND METHODS: Four creep-strain models were utilized in predicting the midpalatal suture's response to a constant-force application during expansion treatment. The functional forms included a three-term separable, three-term inseparable, two-term inseparable, and single-term arrangement. The functions were then transformed into subsequent stress-relaxation representations to predict suture response as a result of 0.25, 0.20, 0.15, and 0.10 mm displacements. Finally, the single-term creep-strain representation was altered to simulate treatment decaying force during treatment. A force that decays 30 and 10% of an initially applied 0.98 N was considered for decaying functions over a 6-week period, and compared to strain resulting from a constant-force application. RESULTS: This analysis illustrated that the decay in suture strain closely followed decay in force and that the path of decay had minimal impact on overall results. Also, it was found that a single screw activation would likely not cause suture soft tissue failure, even for a 0.25 mm displacement, and that suture stress rapidly decayed within minutes of activation. CONCLUSION: Results from this study support the notion of maintaining a low-magnitude constant traction on the suture during treatment to avoid soft tissue failure and promote tissue remodeling.

Changes in temporomandibular joint morphology in class II patients treated with fixed mandibular repositioning and evaluated through 3D imaging: a systematic review.

To estimate the effects of skeletal class II malocclusion treatment using fixed mandibular repositioning appliances on the position and morphology of the temporomandibular joint (TMJ). Two independent reviewers performed comprehensive electronic searches of MEDLINE, EMBASE, EBM reviews and Scopus (until May 5, 2015). The references of the identified articles were also manually searched. All studies investigating morphological changes of the TMJ articular disc, condyle and glenoid fossa with 3D imaging following non-surgical fixed mandibular repositioning appliances in growing individuals with class II malocclusions were included in the analysis. Of the 269 articles initially reviewed, only 12 articles used magnetic resonance imaging and two articles used computed tomography (CT) or cone-beam CT images. Treatment effect on condyle and glenoid fossa was discussed in eight articles. Treatment effect on TMJ articular disc position and morphology was discussed in seven articles. All articles showed a high risk of bias due to deficient methodology: inadequate consideration of confounding variables, blinding of image assessment, selection or absence of control group and outcome measurement. Reported changes in osseous remodelling, condylar and disc position were contradictory. The selected articles failed to establish conclusive evidence of the exact nature of TMJ tissue response to fixed mandibular repositioning appliances.

Assessing the reliability of MRI-CBCT image registration to visualize temporomandibular joints.

OBJECTIVES: To evaluate image quality of two methods of registering MRI and CBCT images of the temporomandibular joint (TMJ), particularly regarding TMJ articular disc-condyle relationship and osseous abnormality. METHODS: MR and CBCT images for 10 patients (20 TMJs) were obtained and co-registered using two methods (non-guided and marker guided) using Mirada XD software (Mirada Medical Ltd, Oxford, UK). Three radiologists independently and blindly evaluated three types of images (MRI, CBCT and registered MRI-CBCT) at two times (T1 and T2) on two criteria: (1) quality of MRI-CBCT registrations (excellent, fair or poor) and (2) TMJ disc-condylar position and articular osseous abnormalities (osteophytes, erosions and subcortical cyst, surface flattening, sclerosis). RESULTS: 75% of the non-guided registered images showed excellent quality, and 95% of the marker-guided registered images showed poor quality. Significant difference was found between the non-guided and marker-guided registration (χ(2) = 108.5; p < 0.01). The interexaminer variability of the disc position in MRI [intraclass correlation coefficient (ICC) = 0.50 at T1, 0.56 at T2] was lower than that in MRI-CBCT registered images [ICC = 0.80 (0.52-0.92) at T1, 0.84 (0.62-0.93) at T2]. Erosions and subcortical cysts were noticed less frequently in the MRI-CBCT images than in CBCT images. CONCLUSIONS: Non-guided registration proved superior to marker-guided registration. Although MRI-CBCT fused images were slightly more limited than CBCT alone to detect osseous abnormalities, use of the fused images improved the consistency among examiners in detecting disc position in relation to the condyle.

Intra-arch dimensional measurement validity of laser-scanned digital dental models compared with the original plaster models: a systematic review.

A systematic review was undertaken to evaluate the validity of intra-arch dimensional measurements made from laser-scanned digital dental models in comparison with measurements directly obtained from the original plaster casts (gold standard). Finally included articles were only those reporting studies that compared measurements from digital models produced from laser scanning against their plaster models. Measurements from the original plaster models should have been made using a manual or digital caliper (gold standard). Articles that used scans from impressions or digital photographs were discarded. Detailed individual search strategies for Cochrane, EMBASE, MEDLINE, PubMed, and LILACS were developed. The references cited in the selected articles were also checked for any references that could have been missed in the electronic database searches. A partial gray literature search was undertaken using Google Scholar. The methodology of selected studies was evaluated using the 14-item quality assessment tool for diagnostic accuracy studies (QUADAS). Only 16 studies were finally included for the qualitative/quantitative synthesis. The selected studies consistently agree that the validity of measurements obtained after using a laser scanner from plaster models is similar to direct measurements. Any stated differences would be unlikely clinically relevant. There is consistent scientific evidence to support the validity of measurements from digital dental models in comparison with intra-arch dimensional measurements directly obtained from them.

The validity, reliability, and time requirement of study model analysis using cone-beam computed tomography-generated virtual study models.

OBJECTIVES: To investigate the validity, reliability, and time spent to perform a full orthodontic study model analysis (SMA) on cone-beam computed tomography (CBCT)-generated dental models (Anatomodels) compared with conventional plaster models and a subset of extracted premolars. SETTING AND SAMPLE POPULATION: A retrospective sample of 30 consecutive patient records with fully erupted permanent dentition, good-quality plaster study models, and CBCT scans. Twenty-two extracted premolars were available from eleven of these patients. MATERIALS AND METHODS: Five evaluators participated in the inter-rater reliability study and one evaluator for the intrarater reliability and validity studies. Agreement was assessed by ICC and cross-tabulations, while mean differences were investigated using paired-sample t-tests and repeated-measures anova. RESULTS: For all three modalities studied, intrarater reliability was excellent, inter-rater reliability was moderate to excellent, validity was poor to moderate, and performing SMA on Anatomodels took twice as long as on plaster. CONCLUSIONS: Study model analysis using CBCT-generated study models was reliable but not always valid and required more time to perform when compared with plaster models.

Towards a viscoelastic model for the unfused midpalatal suture: development and validation using the midsagittal suture in New Zealand white rabbits.

Maxillary expansion treatment is a commonly used procedure by orthodontists to widen a patient's upper jaw. As this is typically performed in adolescent patients, the midpalatal suture, connective tissue adjoining the two maxilla halves, remains unfused. Studies that have investigated patient response to expansion treatment, generally through finite element analysis, have considered this suture to behave in a linear elastic manner or it was left vacant. The purpose of the study presented here was to develop a model that could represent the midpalatal suture's viscoelastic behavior. Quasilinear viscoelastic, modified superposition, Schapery's, and Burgers modeling approaches were all considered. Raw data from a previously published study using New Zealand White Rabbits was utilized for model parameter estimation and validation. In this study, Sentalloy(®) coil springs at load levels of 0.49N (50g), 0.98N (100g), and 1.96N (200g) were used to widen the midsagittal suture of live rabbits over a period of 6 weeks. Evaluation was based on a models ability to represent experimental data well over all three load sets. Ideally, a single set of model constants could be used to represent data over all loads tested. Upon completion of the analysis it was found that the modified superposition method was able to replicate experimental data within one standard deviation of the means using a single set of constants for all loads. Future work should focus on model improvement as well as prediction of treatment outcomes.

Topical contrast agents to improve soft-tissue contrast in the upper airway using cone beam CT: a pilot study.

The purpose of this study is to explore the topical use of radiographic contrast agents to enhance soft-tissue contrast on cone beam CT (CBCT) images. Different barium sulphate concentrations were first tested using an airway phantom. Different methods of barium sulphate application (nasal drops, syringe, spray and sinus wash) were then tested on four volunteers, and nebulized iodine was tested in one volunteer. CBCT images were performed and then assessed subjectively by two examiners for contrast agent uniformity and lack of streak artefact. 25.0% barium sulphate presented adequate viscosity and radiodensity. Barium sulphate administered via nasal drops and sprays showed non-uniform collection at the nostrils, along the inferior and/or middle nasal meatuses and posterior nasal choana. The syringe and sinus wash showed similar results with larger volumes collecting in the naso-oropharynx. Nebulized iodine failed to distribute into the nasal cavity and scarcely collected at the nostrils. All methods of nasal application failed to adequately reach or uniformly coat the nasal cavity beyond the inferior nasal meatuses. The key factors to consider for optimum topical radiographic contrast in the nasal airway are particle size, flow velocity and radio-opacity.

Efficiency of molar distalization with the XBow appliance related to second molar eruption stage.

To quantitatively evaluate on lateral cephalograms horizontal, vertical, and angular changes in the position of the maxillary first molar based on the presence and absence of erupted maxillary second molars when it is distalized with the XBow appliance. In this retrospective study, a total of 102 consecutively treated cases were assessed. Lateral cephalograms were obtained at the start and after completion of active treatment with the XBow appliance. In one group of patients, distal movement of the maxillary first molars was performed before the eruption of maxillary second molars; in the other group of patients, both first and second maxillary molars were simultaneously moved distally. All cephalograms were superimposed on palatal plane using the method of best-fit. In order to compare the mean horizontal, vertical, and angular changes in molar position between the treatment groups and gender, a multivariate analysis of covariance (MANCOVA) was performed with the pre-treatment class II severity used as a covariate. Regression analysis was also performed to further explore any possible relationships between the predictor variables and the quantity and quality of distalization. A MANCOVA revealed that the eruption stage of the maxillary second molar did not have a significant effect on the change in position of the maxillary first molar after treatment with a XBow appliance. When distalizing maxillary first molars with a XBow appliance, there is no difference in the amount of distalization in patients with erupted and unerupted maxillary second molars.

Three-dimensional segmentation of the upper airway using cone beam CT: a systematic review.

The objectives of this study were to systematically review the literature for studies that used cone beam CT (CBCT) to automatically or semi-automatically model the upper airway (including the pharyngeal, nasal and paranasal airways), and to assess their validity and reliability. Several electronic databases (MEDLINE®, MEDLINE In-Process & Other Non-Indexed Citations, all evidence-based medicine reviews including the Cochrane database, and Scopus) were searched. Abstracts that appeared to meet the initial selection criteria were selected by consensus. The original articles were then retrieved and their references were searched manually for potentially suitable articles that were missed during the electronic search. Final articles that met all the selection criteria were evaluated using a customized evaluation checklist. 16 articles were finally selected. From these, five scored more than 50% based on their methodology. Although eight articles reported the reliability of the airway model generated, only three used intraclass correlation (ICC). Two articles tested the accuracy/validity of airway models against the gold standard, manual segmentation, using volumetric measurements; however, neither used ICC. Only three articles properly tested the reliability of the three-dimensional (3D) upper airway model generated from CBCT and only one article had sufficiently sound methodology to test the airway model's accuracy/validity. The literature lacks proper scientific justification of a solid and optimized CBCT protocol for airway imaging. Owing to the limited number of adequate studies, it is difficult to generate a strong conclusion regarding the current validity and reliability of CBCT-generated 3D models.

Review of maxillary expansion appliance activation methods: engineering and clinical perspectives.

Objective. Review the reported activation methods of maxillary expansion devices for midpalatal suture separation from an engineering perspective and suggest areas of improvement. Materials and Methods. A literature search of Scopus and PubMed was used to determine current expansion methods. A U.S. and Canadian patent database search was also conducted using patent classification and keywords. Any paper presenting a new method of expansion was included. Results. Expansion methods in use, or patented, can be classified as either a screw- or spring-type, magnetic, or shape memory alloy expansion appliance. Conclusions. Each activation method presented unique advantages and disadvantages from both clinical and engineering perspectives. Areas for improvement still remain and are identified in the paper.

Sensitivity analysis for plane orientation in three-dimensional cephalometric analysis based on superimposition of serial cone beam computed tomography images.

OBJECTIVES: The purpose of this study was to evaluate the potential errors associated with superimposition of serial cone beam CT (CBCT) images utilizing reference planes based on cranial base landmarks using a sensitivity analysis. METHODS: CBCT images from 62 patients participating in a maxillary expansion clinical trial were analysed. The left and right auditory external meatus (AEM), dorsum foramen magnum (DFM) and the midpoint between the left and right foramen spinosum (ELSA) were used to define a three-dimensional (3D) anatomical reference co-ordinate system. Intraclass correlation coefficients for all four landmarks were obtained. Transformation of the reference system was carried out using the four landmarks and mathematical comparison of values. RESULTS: Excellent intrareliability values for each dimension were obtained for each landmark. Evaluation of the method to transform the co-ordinate system was first done by comparing interlandmark distances before and after transformations, giving errors in lengths in the order of 10-14% (software rounding error). A sensitivity evaluation was performed by adding 0.25 mm, 0.5 mm and 1 mm error in one axis of the ELSA. A positioning error of 0.25 mm in the ELSA can produce up to 1.0 mm error in other cranial base landmark co-ordinates. These errors could be magnified to distant landmarks where in some cases menton and infraorbital landmarks were displaced 4-6 mm. CONCLUSIONS: Minor variations in location of the ELSA, both the AEM and the DFM landmarks produce large and potentially clinically significant uncertainty in co-ordinate system alignment.

The association between neck disability and jaw disability.

The association between cervical spine disorders (CSD) and temporomandibular disorders (TMD) has been extensively investigated. However, no studies investigating the relationship between the level of jaw disability and neck disability have been published. Therefore, the objective of this study was to determine whether there was a relationship between neck disability measured using the neck disability index (NDI) and jaw disability measured through the jaw function scale (JFS). A sample of 154 subjects who attended the TMD/Orofacial Pain clinic and students and staff at the University of Alberta participated in this study. All subjects were asked to complete the NDI, the JFS, the jaw disability checklist (JDC), and the level of chronic disability of TMD (chronic pain grade disability questionnaire used in the RDC/TMD). Spearman rho test was used to analyse the relationship between neck disability and jaw disability. Multiple regression analysis was used to determine the association between the level of chronic disability of TMD and neck disability. A strong relationship between neck disability and jaw disability was found (r = 0.82). A subject with a high level of TMD disability (grade IV) increased by about 19 points on the NDI when compared with a person without TMD disability. These results have implications for clinical practice. If patients with TMD have neck disability in addition to jaw disability, treatment needs to focus on both areas because the improvement of one could have an influence on the other.

Effect of object location on the density measurement and Hounsfield conversion in a NewTom 3G cone beam computed tomography unit.

OBJECTIVES: The purpose of this study was to determine the effect of an object's location in a cone beam CT imaging chamber (CBCT-NewTom 3G) on its apparent density and to develop a linear conversion coefficient for Hounsfield units (HU) to material density (g cm(-3)) for the NewTom 3G Scanner. METHODS: Three cylindrical models of materials with different densities were constructed and scanned at five different locations in a NewTom 3G Volume Scanner. The average HU value for each model at each location was obtained using two different types of software. Next, five cylinders of different known densities were scanned at the exact centre of a NewTom 3G Scanner. The collected data were analysed using the same two types of software to determine a standard linear relationship between density and HU for each type of software. RESULTS: There is no statistical significance of location of an object within the CBCT scanner on determination of its density. A linear relationship between the density of an object and the HU of a scan was rho = 0.001(HU)+1.19 with an R2 value of 0.893 (where density, rho, is measured in g cm(-3)). This equation is to be used on a range between 1.42 g cm(-3) and 0.4456 g cm(-3). CONCLUSIONS: A linear relationship can be used to determine the density of materials (in the density range of bone) from the HU values of a CBCT scan. This relationship is not affected by the object's location within the scanner itself.

Sequential analysis applied to clinical trials in dentistry: a systematic review.

Clinical trials employ sequential analysis for the ethical and economic benefits it brings. In dentistry, as in other fields, resources are scarce and efforts are made to ensure that patients are treated ethically. The objective of this systematic review was to characterise the use of sequential analysis for clinical trials in dentistry. We searched various databases from 1900 through to January 2008. Articles were selected for review if they were clinical trials in the field of dentistry that had applied some form of sequential analysis. Selection was carried out independently by two of the authors. We included 18 trials from various specialties, which involved many different interventions. We conclude that sequential analysis seems to be underused in this field but that there are sufficient methodological resources in place for future applications.Evidence-Based Dentistry (2008) 9, 55-62. doi:10.1038/sj.ebd.6400587.

Surface analysis of etched molar enamel by gas adsorption.

Much research has been devoted to the study of etched enamel, since it is critical to bonding. Currently, there are no precise data regarding the etched-enamel specific surface area. The aim of this study was to characterize, by two different methods, the surface of human dental enamel in vitro after being etched. It was hypothesized that differences would be observed between specimens in terms of specific surface area and grade of etching. Sixteen third molar enamel samples were etched for 30 sec with 37% phosphoric acid prior to being viewed by SEM. Etched enamel surfaces were graded according to the Galil and Wright classification. The total surface area of etched samples was determined by the BET gas absorption method. A substantial variability in total surface area was observed between and among samples. A Pearson's Correlation Coefficient showed a lack of relationship between etch pattern and total surface area.

Role of different imaging modalities in assessment of temporomandibular joint erosions and osteophytes: a systematic review.

OBJECTIVES: To evaluate the ability of different diagnostic imaging techniques for diagnosing the presence of erosions and osteophytes in the temporomandibular joint (TMJ). METHODS: A systematic search of PubMed, Medline, all Evidence Based Medicine (EBM) reviews, Embase, Web of Sciences and Lilacs identified nine articles that met the selection criteria: some type of TMJ diagnostic imaging, data from autopsy or dry skull TMJs as gold standard, absence of diagnosed systemic arthritis and evaluation of the presence of erosions and/or osteophytes. A hand search of the references of the selected articles was also performed. RESULTS: Selected studies evaluated panoramic imaging (unenhanced and colour-enhanced digital subtraction panoramic imaging), axially corrected sagittal tomography, axially corrected frontal tomography, sagittal MRI, CT, high-resolution ultrasound and cone beam CT (CBCT). CONCLUSIONS: Axially corrected sagittal tomography is currently the imaging modality of choice for diagnosing erosions and osteophytes in the TMJ. CT does not seem to add any significant information to what is obtained from axially corrected sagittal tomography. CBCT might prove to be a cost- and radiation dose-effective alternative to axially corrected sagittal tomography. Combining different radiographic techniques is likely to be more accurate in diagnosing erosions and osteophytes in the TMJ than using a single imaging modality. Diagnostic studies that simultaneously evaluate all of the available TMJ imaging technologies are needed.

Longitudinal study on TMJ disk status and its effect on mandibular growth.

OBJECTIVE: This longitudinal study assessed the potential contribution of temporomandibular joint (TMJ) disk status over mandibular linear and angular changes. DESIGN: Cohort study. SETTING: Edmonton, Alberta, Canada. PARTICIPANTS: Seventy-three adolescent subjects attending TMJ or orthodontic clinics with or without TMJ disk abnormality were followed during a mean 3 years 7 months. From this sample 39 subjects underwent orthodontic treatment. METHODS: Disk displacement and disk length measurements taken from MRIs were utilized to evaluate the TMJ disk status. Mandibular changes were quantified from cephalometric radiographs by superimposing the mandible around the internal cortex of the posterior wall of the mandibular symphysis. Fishman's skeletal maturation system was used to calculate the percentage of mandibular growth remaining during the follow-up. This expected mandibular growth was factored out through a statistical normalization process applied to the actual difference between the initial and final mandibular measurements. In addition, previous orthodontic treatment was also considered for the analysis. A multiple analysis of variance (MANOVA) was used to evaluate interaction between the independent variables (TMJ disk status and previous orthodontic treatment) over the dependent variables (mandibular ramus, mandibular body, mandibular length and gonial angle measurements). RESULTS: No significant contribution was found of any of the evaluated variables or its interactions over the mandibular measurements. CONCLUSIONS: No evidence was found of TMJ disk abnormality as an associated significant factor with mandibular dimensional changes. The findings have to be evaluated with caution because of some limitations identified in this study.