ABSTRACT
The A(n+1)B(n)O(3n+1) Ruddlesden-Popper homologous series offers a wide variety of functionalities including dielectric, ferroelectric, magnetic and catalytic properties. Unfortunately, the synthesis of such layered oxides has been a major challenge owing to the occurrence of growth defects that result in poor materials behaviour in the higher-order members. To understand the fundamental physics of layered oxide growth, we have developed an oxide molecular beam epitaxy system with in situ synchrotron X-ray scattering capability. We present results demonstrating that layered oxide films can dynamically rearrange during growth, leading to structures that are highly unexpected on the basis of the intended layer sequencing. Theoretical calculations indicate that rearrangement can occur in many layered oxide systems and suggest a general approach that may be essential for the construction of metastable Ruddlesden-Popper phases. We demonstrate the utility of the new-found growth strategy by performing the first atomically controlled synthesis of single-crystalline La3Ni2O7.
ABSTRACT
The variation in the fitting accuracy of neural networks (NNs) when used to fit databases comprising potential energies obtained from ab initio electronic structure calculations is investigated as a function of the number and nature of the elements employed in the input vector to the NN. Ab initio databases for H(2)O(2), HONO, Si(5), and H(2)C[Double Bond]CHBr were employed in the investigations. These systems were chosen so as to include four-, five-, and six-body systems containing first, second, third, and fourth row elements with a wide variety of chemical bonding and whose conformations cover a wide range of structures that occur under high-energy machining conditions and in chemical reactions involving cis-trans isomerizations, six different types of two-center bond ruptures, and two different three-center dissociation reactions. The ab initio databases for these systems were obtained using density functional theory/B3LYP, MP2, and MP4 methods with extended basis sets. A total of 31 input vectors were investigated. In each case, the elements of the input vector were chosen from interatomic distances, inverse powers of the interatomic distance, three-body angles, and dihedral angles. Both redundant and nonredundant input vectors were investigated. The results show that among all the input vectors investigated, the set employed in the Z-matrix specification of the molecular configurations in the electronic structure calculations gave the lowest NN fitting accuracy for both Si(5) and vinyl bromide. The underlying reason for this result appears to be the discontinuity present in the dihedral angle for planar geometries. The use of trigometric functions of the angles as input elements produced significantly improved fitting accuracy as this choice eliminates the discontinuity. The most accurate fitting was obtained when the elements of the input vector were taken to have the form R(ij) (-n), where the R(ij) are the interatomic distances. When the Levenberg-Marquardt procedure was modified to permit error minimization with respect to n as well as the weights and biases of the NN, the optimum powers were all found to lie in the range of 1.625-2.38 for the four systems studied. No statistically significant increase in fitting accuracy was achieved for vinyl bromide when a different value of n was employed and optimized for each bond type. The rate of change in the fitting error with n is found to be very small when n is near its optimum value. Consequently, good fitting accuracy can be achieved by employing a value of n in the middle of the above range. The use of interparticle distances as elements of the input vector rather than the Z-matrix variables employed in the electronic structure calculations is found to reduce the rms fitting errors by factors of 8.86 and 1.67 for Si(5) and vinyl bromide, respectively. If the interparticle distances are replaced with input elements of the form R(ij) (-n) with n optimized, further reductions in the rms error by a factor of 1.31 to 2.83 for the four systems investigated are obtained. A major advantage of using this procedure to increase NN fitting accuracy rather than increasing the number of neurons or the size of the database is that the required increase in computational effort is very small.
ABSTRACT
A novel method is presented that significantly reduces the computational bottleneck of executing high-level, electronic structure calculations of the energies and their gradients for a large database that adequately samples the configuration space of importance for systems containing more than four atoms that are undergoing multiple, simultaneous reactions in several energetically open channels. The basis of the method is the high-degree of correlation that generally exists between the Hartree-Fock (HF) and higher-level electronic structure energies. It is shown that if the input vector to a neural network (NN) includes both the configuration coordinates and the HF energies of a small subset of the database, MP4(SDQ) energies with the same basis set can be predicted for the entire database using only the HF and MP4(SDQ) energies for the small subset and the HF energies for the remainder of the database. The predictive error is shown to be less than or equal to the NN fitting error if a NN is fitted to the entire database of higher-level electronic structure energies. The general method is applied to the computation of MP4(SDQ) energies of 68,308 configurations that comprise the database for the simultaneous, unimolecular decomposition of vinyl bromide into six different reaction channels. The predictive accuracy of the method is investigated by employing successively smaller subsets of the database to train the NN to predict the MP4(SDQ) energies of the remaining configurations of the database. The results indicate that for this system, the subset can be as small as 8% of the total number of configurations in the database without loss of accuracy beyond that expected if a NN is employed to fit the higher-level energies for the entire database. The utilization of this procedure is shown to save about 78% of the total computational time required for the execution of the MP4(SDQ) calculations. The sampling error involved with selection of the subset is shown to be about 10% of the predictive error for the higher-level energies. A practical procedure for utilization of the method is outlined. It is suggested that the method will be equally applicable to the prediction of electronic structure energies computed using even higher-level methods than MP4(SDQ).
ABSTRACT
A general method for the development of potential-energy hypersurfaces is presented. The method combines a many-body expansion to represent the potential-energy surface with two-layer neural networks (NN) for each M-body term in the summations. The total number of NNs required is significantly reduced by employing a moiety energy approximation. An algorithm is presented that efficiently adjusts all the coupled NN parameters to the database for the surface. Application of the method to four different systems of increasing complexity shows that the fitting accuracy of the method is good to excellent. For some cases, it exceeds that available by other methods currently in literature. The method is illustrated by fitting large databases of ab initio energies for Si(n) (n=3,4,...,7) clusters obtained from density functional theory calculations and for vinyl bromide (C(2)H(3)Br) and all products for dissociation into six open reaction channels (12 if the reverse reactions are counted as separate open channels) that include C-H and C-Br bond scissions, three-center HBr dissociation, and three-center H(2) dissociation. The vinyl bromide database comprises the ab initio energies of 71 969 configurations computed at MP4(SDQ) level with a 6-31G(d,p) basis set for the carbon and hydrogen atoms and Huzinaga's (4333/433/4) basis set augmented with split outer s and p orbitals (43321/4321/4) and a polarization f orbital with an exponent of 0.5 for the bromine atom. It is found that an expansion truncated after the three-body terms is sufficient to fit the Si(5) system with a mean absolute testing set error of 5.693x10(-4) eV. Expansions truncated after the four-body terms for Si(n) (n=3,4,5) and Si(n) (n=3,4,...,7) provide fits whose mean absolute testing set errors are 0.0056 and 0.0212 eV, respectively. For vinyl bromide, a many-body expansion truncated after the four-body terms provides fitting accuracy with mean absolute testing set errors that range between 0.0782 and 0.0808 eV. These errors correspond to mean percent errors that fall in the range 0.98%-1.01%. Our best result using the present method truncated after the four-body summation with 16 NNs yields a testing set error that is 20.3% higher than that obtained using a 15-dimensional (15-140-1) NN to fit the vinyl bromide database. This appears to be the price of the added simplicity of the many-body expansion procedure.
ABSTRACT
An improved neural network (NN) approach is presented for the simultaneous development of accurate potential-energy hypersurfaces and corresponding force fields that can be utilized to conduct ab initio molecular dynamics and Monte Carlo studies on gas-phase chemical reactions. The method is termed as combined function derivative approximation (CFDA). The novelty of the CFDA method lies in the fact that although the NN has only a single output neuron that represents potential energy, the network is trained in such a way that the derivatives of the NN output match the gradient of the potential-energy hypersurface. Accurate force fields can therefore be computed simply by differentiating the network. Both the computed energies and the gradients are then accurately interpolated using the NN. This approach is superior to having the gradients appear in the output layer of the NN because it greatly simplifies the required architecture of the network. The CFDA permits weighting of function fitting relative to gradient fitting. In every test that we have run on six different systems, CFDA training (without a validation set) has produced smaller out-of-sample testing error than early stopping (with a validation set) or Bayesian regularization (without a validation set). This indicates that CFDA training does a better job of preventing overfitting than the standard methods currently in use. The training data can be obtained using an empirical potential surface or any ab initio method. The accuracy and interpolation power of the method have been tested for the reaction dynamics of H+HBr using an analytical potential. The results show that the present NN training technique produces more accurate fits to both the potential-energy surface as well as the corresponding force fields than the previous methods. The fitting and interpolation accuracy is so high (rms error=1.2 cm(-1)) that trajectories computed on the NN potential exhibit point-by-point agreement with corresponding trajectories on the analytic surface.
ABSTRACT
Previous methods proposed for obtaining analytic potential-energy surfaces (PES) from ab initio electronic structure calculations are not self-starting. They generally require that the sampling of configuration space important in the reaction dynamics of the process being investigated be initiated by using chemical intuition or a previously developed semiempirical potential-energy surface. When the system under investigation contains four or more atoms undergoing three- and four-center reactions in addition to bond scission processes, obtaining a sufficiently converged initial sampling can be very difficult due to the extremely large volume of configuration space that is important in the reaction dynamics. It is shown that by combining direct dynamics (DD) with previously reported molecular dynamics (MD), novelty sampling (NS), and neural network (NN) methods, an analytical surface suitable for MD computations for large systems may be obtained. Application of the method to the investigation of N-O bond scission and cis-trans isomerization reactions of HONO followed by comparison of the resulting neural network potential-energy surface to one obtained by using a semiempirical potential to initiate the sampling shows that the two potential surfaces are the same within the fitting accuracy of the surfaces. It is concluded that the combination of direct dynamics, molecular dynamics, novelty sampling, and neural network fitting provides a self-starting, robust, and accurate DD/MD/NS/NN method for the execution of first-principles, ab initio, molecular dynamics studies in systems containing four or more atoms which are undergoing simultaneous two-, three-, and four-center reactions.
ABSTRACT
A generalized method that permits the parameters of an arbitrary empirical potential to be efficiently and accurately fitted to a database is presented. The method permits the values of a subset of the potential parameters to be considered as general functions of the internal coordinates that define the instantaneous configuration of the system. The parameters in this subset are computed by a generalized neural network (NN) with one or more hidden layers and an input vector with at least 3n-6 elements, where n is the number of atoms in the system. The Levenberg-Marquardt algorithm is employed to efficiently affect the optimization of the weights and biases of the NN as well as all other potential parameters being treated as constants rather than as functions of the input coordinates. In order to effect this minimization, the usual Jacobian employed in NN operations is modified to include the Jacobian of the computed errors with respect to the parameters of the potential function. The total Jacobian employed in each epoch of minimization is the concatenation of two Jacobians, one containing derivatives of the errors with respect to the weights and biases of the network, and the other with respect to the constant parameters of the potential function. The method provides three principal advantages. First, it obviates the problem of selecting the form of the functional dependence of the parameters upon the system's coordinates by employing a NN. If this network contains a sufficient number of neurons, it will automatically find something close to the best functional form. This is the case since Hornik et al., [Neural Networks 2, 359 (1989)] have shown that two-layer NNs with sigmoid transfer functions in the first hidden layer and linear functions in the output layer are universal approximators for analytic functions. Second, the entire fitting procedure is automated so that excellent fits are obtained rapidly with little human effort. Third, the method provides a procedure to avoid local minima in the multidimensional parameter hyperspace. As an illustrative example, the general method has been applied to the specific case of fitting the ab initio energies of Si(5) clusters that are observed in a molecular dynamics (MD) simulation of the machining of a silicon workpiece. The energies of the Si(5) configurations obtained in the MD calculations are computed using the B3LYP procedure with a 6-31G(**) basis set. The final ab initio database, which comprises the density functional theory energies of 10 202 Si(5) clusters, is fitted to an empirical Tersoff potential containing nine adjustable parameters, two of which are allowed to be the functions of the Si(5) configuration. The fitting error averaged over all 10 202 points is 0.0148 eV (1.43 kJ mol(-1)). This result is comparable to the accuracy achieved by more general fitting methods that do not rely on an assumed functional form for the potential surface.
ABSTRACT
A previously reported method for conducting molecular dynamics simulations of gas-phase chemical dynamics on ab initio potential-energy surfaces using modified novelty sampling and feedforward neural networks is applied to the investigation of the unimolecular dissociation of vinyl bromide. The neural network is fitted to a database comprising the MP4(SDQ) energies computed for 71 969 nuclear configurations using an extended basis set. Dissociation rate coefficients and branching ratios at an internal excitation energy of 6.44 eV for all six open reaction channels are reported. The distribution of vibrational energy in HBr formed in three-center dissociation is computed and found to be in excellent accord with experimental measurements. Computational requirements for the electronic structure calculations, neural network training, and trajectory calculations are given. The weight and bias matrices required for implementation of the neural network potential are made available through the Supplementary Material.
ABSTRACT
A neural network/trajectory approach is presented for the development of accurate potential-energy hypersurfaces that can be utilized to conduct ab initio molecular dynamics (AIMD) and Monte Carlo studies of gas-phase chemical reactions, nanometric cutting, and nanotribology, and of a variety of mechanical properties of importance in potential microelectromechanical systems applications. The method is sufficiently robust that it can be applied to a wide range of polyatomic systems. The overall method integrates ab initio electronic structure calculations with importance sampling techniques that permit the critical regions of configuration space to be determined. The computed ab initio energies and gradients are then accurately interpolated using neural networks (NN) rather than arbitrary parametrized analytical functional forms, moving interpolation or least-squares methods. The sampling method involves a tight integration of molecular dynamics calculations with neural networks that employ early stopping and regularization procedures to improve network performance and test for convergence. The procedure can be initiated using an empirical potential surface or direct dynamics. The accuracy and interpolation power of the method has been tested for two cases, the global potential surface for vinyl bromide undergoing unimolecular decomposition via four different reaction channels and nanometric cutting of silicon. The results show that the sampling methods permit the important regions of configuration space to be easily and rapidly identified, that convergence of the NN fit to the ab initio electronic structure database can be easily monitored, and that the interpolation accuracy of the NN fits is excellent, even for systems involving five atoms or more. The method permits a substantial computational speed and accuracy advantage over existing methods, is robust, and relatively easy to implement.