ABSTRACT
There are several image inverse tasks, such as inpainting or super-resolution, which can be solved using deep internal learning, a paradigm that involves employing deep neural networks to find a solution by learning from the sample itself rather than a dataset. For example, Deep Image Prior is a technique based on fitting a convolutional neural network to output the known parts of the image (such as non-inpainted regions or a low-resolution version of the image). However, this approach is not well adjusted for samples composed of multiple modalities. In some domains, such as satellite image processing, accommodating multi-modal representations could be beneficial or even essential. In this work, Multi-Modal Convolutional Parameterisation Network (MCPN) is proposed, where a convolutional neural network approximates shared information between multiple modes by combining a core shared network with modality-specific head networks. The results demonstrate that these approaches can significantly outperform the single-mode adoption of a convolutional parameterisation network on guided image inverse problems of inpainting and super-resolution.
ABSTRACT
This paper reports on the use of estimates of individual animal feed intake (made using time spent feeding measurements) to predict the Feed Conversion Ratio (FCR), a measure of the amount of feed consumed to produce 1 kg of body mass, for an individual animal. Reported research to date has evaluated the ability of statistical methods to predict daily feed intake based on measurements of time spent feeding measured using electronic feeding systems. The study collated data of the time spent eating for 80 beef animals over a 56-day period as the basis for the prediction of feed intake. A Support Vector Regression (SVR) model was trained to predict feed intake and the performance of the approach was quantified. Here, feed intake predictions are used to estimate individual FCR and use this information to categorise animals into three groups based on the estimated Feed Conversion Ratio value. Results provide evidence of the feasibility of utilising the 'time spent eating' data to estimate feed intake and in turn Feed Conversion Ratio (FCR), the latter providing insights that guide farmer decisions on the optimisation of production costs.
Subject(s)
Animal Feed , Eating , Animals , Cattle , ElectronicsABSTRACT
Monitoring and classification of dairy cattle behaviours is essential for optimising milk yields. Early detection of illness, days before the critical conditions occur, together with automatic detection of the onset of oestrus cycles is crucial for obviating prolonged cattle treatments and improving the pregnancy rates. Accelerometer-based sensor systems are becoming increasingly popular, as they are automatically providing information about key cattle behaviours such as the level of restlessness and the time spent ruminating and eating, proxy measurements that indicate the onset of heat events and overall welfare, at an individual animal level. This paper reports on an approach to the development of algorithms that classify key cattle states based on a systematic dimensionality reduction process through two feature selection techniques. These are based on Mutual Information and Backward Feature Elimination and applied on knowledge-specific and generic time-series extracted from raw accelerometer data. The extracted features are then used to train classification models based on a Hidden Markov Model, Linear Discriminant Analysis and Partial Least Squares Discriminant Analysis. The proposed feature engineering methodology permits model deployment within the computing and memory restrictions imposed by operational settings. The models were based on measurement data from 18 steers, each animal equipped with an accelerometer-based neck-mounted collar and muzzle-mounted halter, the latter providing the truthing data. A total of 42 time-series features were initially extracted and the trade-off between model performance, computational complexity and memory footprint was explored. Results show that the classification model that best balances performance and computation complexity is based on Linear Discriminant Analysis using features selected through Backward Feature Elimination. The final model requires 1.83 ± 1.00 ms to perform feature extraction with 0.05 ± 0.01 ms for inference with an overall balanced accuracy of 0.83.
Subject(s)
Algorithms , Eating , Accelerometry , Animals , Cattle , Female , Least-Squares Analysis , PregnancyABSTRACT
Monitoring cattle behaviour is core to the early detection of health and welfare issues and to optimise the fertility of large herds. Accelerometer-based sensor systems that provide activity profiles are now used extensively on commercial farms and have evolved to identify behaviours such as the time spent ruminating and eating at an individual animal level. Acquiring this information at scale is central to informing on-farm management decisions. The paper presents the development of a Convolutional Neural Network (CNN) that classifies cattle behavioural states ('rumination', 'eating' and 'other') using data generated from neck-mounted accelerometer collars. During three farm trials in the United Kingdom (Easter Howgate Farm, Edinburgh, UK), 18 steers were monitored to provide raw acceleration measurements, with ground truth data provided by muzzle-mounted pressure sensor halters. A range of neural network architectures are explored and rigorous hyper-parameter searches are performed to optimise the network. The computational complexity and memory footprint of CNN models are not readily compatible with deployment on low-power processors which are both memory and energy constrained. Thus, progressive reductions of the CNN were executed with minimal loss of performance in order to address the practical implementation challenges, defining the trade-off between model performance versus computation complexity and memory footprint to permit deployment on micro-controller architectures. The proposed methodology achieves a compression of 14.30 compared to the unpruned architecture but is nevertheless able to accurately classify cattle behaviours with an overall F1 score of 0.82 for both FP32 and FP16 precision while achieving a reasonable battery lifetime in excess of 5.7 years.
Subject(s)
Data Compression , Neural Networks, Computer , Accelerometry , Animals , Cattle , Eating , United KingdomABSTRACT
Automated methods for detecting defects within composite materials are highly desirable in the drive to increase throughput, optimise repair program effectiveness and reduce component replacement. Tap-testing has traditionally been used for detecting defects but does not provide quantitative measurements, requiring secondary techniques such as ultrasound to certify components. This paper reports on an evaluation of the use of a distributed temperature measurement system-high-definition fibre optic sensing (HD-FOS)-to identify and characterise crushed core and disbond defects in carbon fibre reinforced polymer (CFRP)-skin, aluminium-core, sandwich panels. The objective is to identify these defects in a sandwich panel by measuring the heat transfer through the panel thickness. A heater mat is used to rapidly increase the temperature of the panel with the HD-FOS sensor positioned on the top surface, measuring temperature. HD-FOS measurements are made using the Luna optical distributed sensor interrogator (ODISI) 9100 system comprising a sensor fabricated using standard single mode fibre (SMF)-20 of external diameter 250 µm, including the cladding. Results show that areas in which defects are present modulate thermal conductivity, resulting in a lower surface temperature. The resultant data are analysed to identify the length, width and type of defect. The non-invasive technique is amenable to application in challenging operational settings, offering high-resolution visualisation and defect classification.
ABSTRACT
Delaminations within aerospace composites are of particular concern, presenting within composite laminate structures without visible surface indications. Transmission based thermography techniques using contact temperature sensors and surface mounted heat sources are able to detect reductions in thermal conductivity and in turn impact damage and large disbonds can be detected. However delaminations between Carbon Fibre Reinforced Polymer (CFRP) plies are not immediately discoverable using the technique. The use of transient thermal conduction profiles induced from zonal heating of a CFRP laminate to ascertain inter-laminate differences has been demonstrated and the paper builds on this method further by investigating the impact of inter laminate inclusions, in the form of delaminations, to the transient thermal conduction profile of multi-ply bi-axial CFRP laminates. Results demonstrate that as the distance between centre of the heat source and delamination increase, whilst maintaining the delamination within the heated area, the resultant transient thermal conduction profile is measurably different to that of a homogeneous region at the same distance. The method utilises a supervised Support Vector Classification (SVC) algorithm to detect delaminations using temperature data from either the edge of the defect or the centre during a 140 s ramped heating period to 80 °C. An F1 score in the classification of delaminations or no delamination at an overall accuracy of over 99% in both training and with test data separate from the training process has been achieved using data points effected by transient thermal conduction due to structural dissipation at 56.25 mm.
ABSTRACT
The growth in wirelessly enabled sensor network technologies has enabled the low cost deployment of sensor platforms with applications in a range of sectors and communities. In the agricultural domain such sensors have been the foundation for the creation of decision support tools that enhance farm operational efficiency. This Research Reflection illustrates how these advances are assisting dairy farmers to optimise performance and illustrates where emerging sensor technology can offer additional benefits. One of the early applications for sensor technology at an individual animal level was the accurate identification of cattle entering into heat (oestrus) to increase the rate of successful pregnancies and thus optimise milk yield per animal. This was achieved through the use of activity monitoring collars and leg tags. Additional information relating to the behaviour of the cattle, namely the time spent eating and ruminating, was subsequently derived from collars giving further insights of economic value into the wellbeing of the animal, thus an enhanced range of welfare related services have been provisioned. The integration of the information from neck-mounted collars with the compositional analysis data of milk measured at a robotic milking station facilitates the early diagnosis of specific illnesses such as mastitis. The combination of different data streams also serves to eliminate the generation of false alarms, improving the decision making capability. The principle of integrating more data streams from deployed on-farm systems, for example, with feed composition data measured at the point of delivery using instrumented feeding wagons, supports the optimisation of feeding strategies and identification of the most productive animals. Optimised feeding strategies reduce operational costs and minimise waste whilst ensuring high welfare standards. These IoT-inspired solutions, made possible through Internet-enabled cloud data exchange, have the potential to make a major impact within farming practices. This paper gives illustrative examples and considers where new sensor technology from the automotive industry may also have a role.
Subject(s)
Animal Welfare , Cattle , Dairying/methods , Farms/organization & administration , Internet of Things , Animal Feed , Animals , Dairying/instrumentation , Estrus Detection/instrumentation , Female , Internet of Things/instrumentation , Mastitis, Bovine/diagnosis , Monitoring, Physiologic/instrumentation , Monitoring, Physiologic/veterinary , Pregnancy , RadarABSTRACT
Sandwich panels consisting of two Carbon Fibre Reinforced Polymer (CFRP) outer skins and an aluminium honeycomb core are a common structure of surfaces on commercial aircraft due to the beneficial strength-weight ratio. Mechanical defects such as a crushed honeycomb core, dis-bonds and delaminations in the outer skins and in the core occur routinely under normal use and are repaired during aerospace Maintenance, Repair and Overhaul (MRO) processes. Current practices rely heavily on manual inspection where it is possible minor defects are not identified prior to primary repair and are only addressed after initial repairs intensify the defects due to thermal expansion during high temperature curing. This paper reports on the development and characterisation of a technique based on conductive thermography implemented using an array of single point temperature sensors mounted on one surface of the panel and the concomitant induced thermal profile generated by a thermal stimulus on the opposing surface to identify such defects. Defects are classified by analysing the differential conduction of thermal energy profiles across the surface of the panel. Results indicate that crushed core and impact damage are detectable using a stepped temperature profile of 80 ∘C The method is amenable to integration within the existing drying cycle stage and reduces the costs of executing the overall process in terms of time-to-repair and manual effort.
ABSTRACT
The experiment reported in this research paper aimed to determine whether clinical and subclinical effects on cattle were similar if provided with isoenergetic and isonitrogenous challenge diets in which carbohydrate sources were predominantly starch or sugar. The study was a 3 × 3 Latin square using six adult Jersey cows with rumen cannulae, over 9 weeks. In the first 2 weeks of each 3 week experimental period cows were fed with a maintenance diet and, in the last week, each animal was assigned to one of three diets: a control diet (CON), being a continuation of the maintenance diet; a high starch (HSt) or a high sugar (HSu) diet. Reticuloruminal pH and motility were recorded throughout the study period. Blood and ruminal samples were taken on day-1 (TP-1), day-2 (TP-2) and day-7 (TP-7) of each challenge week. Four clinical variables were recorded daily: diarrhoea, inappetence, depression and ruminal tympany. The effects of treatment, hour of day and day after treatment on clinical parameters were analysed using linear mixed effects (LME) models. Although both challenge diets resulted in a decline in pH, an increase in the absolute pH residuals and an increase in the number of minutes per day under pH 5.8, systemic inflammation was only detected with the HSt diet. The challenge diets differentially modified amplitude and period of reticuloruminal contractions compared with CON diet and both were associated with an increased probability of diarrhoea. The HSu diet reduced the probability of an animal consuming its complete allocation. Because the challenge diets were derived from complex natural materials (barley and molasses respectively), it is not possible to assign all the differential effects to the difference in starch and sugar concentration: non-starch components of barley or non-sugar components of molasses might have contributed to some of the observations. In conclusion, substituting much of the starch with sugar caused no substantial reduction in the acidosis load, but inflammatory response was reduced while feed rejection was increased.
Subject(s)
Cattle/physiology , Diet/veterinary , Dietary Sugars/administration & dosage , Rumen/physiology , Starch/administration & dosage , Animal Feed/analysis , Animals , Biomarkers/blood , Female , Gastrointestinal Motility/physiology , Hydrogen-Ion Concentration , Inflammation/blood , Rumen/drug effectsABSTRACT
Regulatory requirements for sub-sea oil and gas operators mandates the frequent inspection of pipeline assets to ensure that their degradation and damage are maintained at acceptable levels. The inspection process is usually sub-contracted to surveyors who utilize sub-sea Remotely Operated Vehicles (ROVs), launched from a surface vessel and piloted over the pipeline. ROVs capture data from various sensors/instruments which are subsequently reviewed and interpreted by human operators, creating a log of event annotations; a slow, labor-intensive and costly process. The paper presents an automatic image annotation framework that identifies/classifies key events of interest in the video footage viz. exposure, burial, field joints, anodes, and free spans. The reported methodology utilizes transfer learning with a Deep Convolutional Neural Network (ResNet-50), fine-tuned on real-life, representative data from challenging sub-sea environments with low lighting conditions, sand agitation, sea-life and vegetation. The network outputs are configured to perform multi-label image classifications for critical events. The annotation performance varies between 95.1% and 99.7% in terms of accuracy and 90.4% and 99.4% in terms of F1-Score depending on event type. The performance results are on a per-frame basis and corroborate the potential of the algorithm to be the foundation for an intelligent decision support framework that automates the annotation process. The solution can execute annotations in real-time and is significantly more cost-effective than human-only approaches.
ABSTRACT
The reticuloruminal function is central to the digestive efficiency in ruminants. For cattle, collar- and ear tag-based accelerometer monitors have been developed to assess the time spent ruminating on an individual animal. Cattle that are ill feed less and so ruminate less, thus, the estimation of the time spent ruminating provides insights into the health of individual animals. pH boluses directly provide information on the reticuloruminal function within the rumen and extended (three hours or more) periods during which the ruminal pH value remains below 5.6 is an indicator that dysfunction and poor welfare are likely. Accelerometers, incorporated into the pH boluses, have been used to indicate changes in behaviour patterns (high/low activity), utilised to detect the onset of oestrus. The paper demonstrates for the first time that by processing the reticuloruminal motion, it is possible to recover rumination periods. Reticuloruminal motion energy and the time between reticuloruminal contractions are used as inputs to a Support Vector Machine (SVM) to identify rumination periods with an overall accuracy of 86.1%, corroborated by neck mounted rumination collars.
ABSTRACT
The application of pH observations to clinical practice in dairy cattle is based on criteria derived primarily from single time-point observations more than 20 years ago. The aims of this study were to evaluate these criteria using data collected using continuous recording methods; to make recommendations that might improve their interpretation; and to determine the relationship between the number of devices deployed in a herd and the accuracy of the resulting estimate of the herd-mean reticuloruminal pH. The study made use of 815,475 observations of reticuloruminal pH values obtained from 75 cattle in three herds (one beef and two twice-daily milking herds) to assess sampling strategies for the diagnosis of sub-acute rumen acidosis (SARA), and to evaluate the ability of different numbers of bolus devices to accurately estimate the true herd-mean reticuloruminal pH value at any time. The traditional criteria for SARA provide low diagnostic utility, the probability of detection of animals with pH values below specified thresholds being affected by a strong effect of time of day and herd. The analysis suggests that regardless of time of feeding, sampling should be carried out in the late afternoon or evening to obtain a reasonable probability of detection of animals with pH values below the threshold level. The among-cow variation varied strongly between herds, but for a typical herd, if using reticuloruminal pH boluses to detect a predisposition to fermentation disorders while feeding a diet that is high in rapidly fermentable carbohydrates, it is recommended to use a minimum of nine boluses.
Subject(s)
Acidosis/veterinary , Animal Husbandry/methods , Cattle Diseases/diagnosis , Reticulum/physiology , Rumen/physiology , Acidosis/diagnosis , Animal Husbandry/instrumentation , Animals , Cattle , Female , Hydrogen-Ion Concentration , Retrospective Studies , Sampling StudiesABSTRACT
Using automatic sensor data, this is the first study to characterize individual cow feeding and rumination behavior simultaneously as affected by lameness. A group of mixed-parity, lactating Holstein cows were loose-housed with free access to 24 cubicles and 12 automatic feed stations. Cows were milked three times/day. Fresh feed was delivered once daily. During 24 days with effectively 22 days of data, 13,908 feed station visits and 7,697 rumination events obtained from neck-mounted accelerometers on 16 cows were analyzed. During the same period, cows were locomotion scored on four occasions and categorized as lame (n = 9) or not lame (n = 7) throughout the study. Rumination time, number of rumination events, feeding time, feeding frequency, feeding rate, feed intake, and milk yield were calculated per day, and coefficients of variation were used to estimate variation between and within cows. Based on daily sums, using each characteristic as response, the effects of lameness and stage of lactation were tested in a mixed model. With rumination time as response, each of the four feeding characteristics, milk yield, and lameness were tested in a second mixed model. On a visit basis, effects of feeding duration, lameness, and milk yield on feed intake were tested in a third mixed model. Overall, intra-individual variation was <15% and inter-individual variation was up to 50%. Lameness introduced more inter-individual variation in feeding characteristics (26-50%) compared to non-lame cows (17-29%). Lameness decreased daily feeding time and daily feeding frequency, but increased daily feeding rate. Interestingly, lameness did not affect daily rumination behaviors, fresh matter intake, or milk yield. On a visit basis, a high feeding rate was associated with a higher feed intake, a relationship that was exacerbated in the lame cows. In conclusion, cows can be characterized in particular by their feeding behavior, and lame cows differ from their non-lame pen-mates in terms of fewer feed station visits, faster eating, less time spent feeding, and more variable feeding behavior. Further, daily rumination time was slightly negatively associated with feeding rate, a relationship which calls for more research to quantify rumination efficiency relative to feeding rate.