From biomass to Energy: Investigating Chlorella pyrenoidosa's potential for fuel and carbon materials.

This study investigated the bioenergy potential of Chlorella pyrenoidosa (CP) for use as fuel and carbon material through chemical and thermal characterization. The thermo-kinetic characteristics of Chlorella pyrenoidosa were assessed using isoconversional, linear regression, and non-linear regression approaches. The physicochemical analysis revealed high carbon (53.1 %), volatile (69.35 %), and low moisture (2.19 %), ash content (3.42 %). The results indicated that the non-linear model fitting method was the most accurate with the approximated activation energy (Eα) and pre-exponential Arrhenius constant (Ln A) were 124.92 ± 2.74 kJ/mol and 23.38 ± 4.63 min-1, respectively. Additionally, the inclusion of sodium bicarbonate resulted in a significant increase in BET surface area. FTIR analysis revealed several functional groups beneficial for carbon material, while XRD analysis showed a broad peak correlated with an amorphous structure. This study highlighted the potential of Chlorella pyrenoidosa biomass for various applications, including carbon material and renewable fuel.

Recent Advances in Anode Electrocatalysts for Direct Formic Acid Fuel Cell-II-Platinum-Based Catalysts.

Platinum-based catalysts have a long history of application in formic acid oxidation (FAO). The single metal Pt is active in FAO but expensive, scarce, and rapidly deactivates. Understanding the mechanism of FAO over Pt important for the rational design of catalysts. Pt nanomaterials rapidly deactivate because of the CO poisoning of Pt active sites via the dehydration pathway. Alloying with another transition metal improves the performance of Pt-based catalysts through bifunctional, ensemble, and steric effects. Supporting Pt catalysts on a high-surface-area support material is another technique to improve their overall catalytic activity. This review summarizes recent findings on the mechanism of FAO over Pt and Pt-based alloy catalysts. It also summarizes and analyzes binary and ternary Pt-based catalysts to understand their catalytic activity and structure relationship.

Recent Advances in Anode Electrocatalysts for Direct Formic Acid Fuel Cells - Part I - Fundamentals and Pd Based Catalysts.

Direct formic acid fuel cells (DFAFCs) have gained immense importance as a source of clean energy for portable electronic devices. It outperforms other fuel cells in several key operational and safety parameters. However, slow kinetics of the formic acid oxidation at the anode remains the main obstacle in achieving a high power output in DFAFCs. Noble metal-based electrocatalysts are effective, but are expensive and prone to CO poisoning. Recently, a substantial volume of research work have been dedicated to develop inexpensive, high activity and long lasting electrocatalysts. Herein, recent advances in the development of anode electrocatalysts for DFAFCs are presented focusing on understanding the relationship between activity and structure. This review covers the literature related to the electrocatalysts based on noble metals, non-noble metals, metal-oxides, synthesis route, support material, and fuel cell performance. The future prospects and bottlenecks in the field are also discussed at the end.

Influence of Nitrogen to Phosphorus Ratio and CO2 Concentration on Lipids Accumulation of Scenedesmus dimorphus for Bioenergy Production and CO2 Biofixation.

The potential of Scenedesmus dimorphus microalgae for CO2 biofixation and lipid biosynthesis for bioenergy applications was evaluated in this study. Batch experiments were conducted using synthetic tertiary municipal wastewater samples at several nitrogen to phosphorus (NP) ratios (1 : 1 to 8 : 1) and CO2 concentrations (∼0%, 2%, 4%, and 6% CO2 in supplied air). Scenedesmus dimorphus was cultivated for 25 days and the growth is highly dependent on the CO2 concentration and the NP ratio. An NP ratio of 2 : 1 produces a biomass yield of 733 mg/L when the microalga culture was supplied with air enriched with 2% CO2 . The maximum CO2 biofixation rate of 49.6 mg L-1 d-1 is at an NP ratio of 8 : 1 with 4% CO2 . A colorimetric technique depending on sulpho-phospho-vanillin (SPV) was utilized for the determination of the intracellular lipid content. The highest lipid content of 31.6% as the dry weight of the biomass is at an NP ratio of 1 : 1 and 6% CO2 . These results indicate that supplementation of suitable CO2 with favorable NP ratio has a considerable effect on lipid accumulation in the microalgae Scenedesmus dimorphus biomass.