Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 6 de 6
Filter
Add more filters








Database
Language
Publication year range
1.
Opt Express ; 22(9): 10923-37, 2014 May 05.
Article in English | MEDLINE | ID: mdl-24921791

ABSTRACT

We demonstrate full flex-grid operation with Nyquist frequency division multiplexing. The technique supports high spectral efficiency, asynchronous operation of channels, variable channel loading with different modulation formats and dynamic bandwidth allocation. Data from different sources with different bit and symbol rates are encoded onto electrical Nyquist pulses with different electrical subcarrier frequencies, and then transmitted optically. We give details on the transceiver design with digital signal processing and investigate the implementation penalty as a function of several design parameters such as limited filter length and effective number of bits. Finally, experiments are performed for receivers with direct detection, intradyne and remote heterodyne reception.

2.
Opt Express ; 22(8): 9344-59, 2014 Apr 21.
Article in English | MEDLINE | ID: mdl-24787823

ABSTRACT

Efficient algorithms for timing, carrier frequency and phase recovery of Nyquist and OFDM signals are introduced and experimentally verified. The algorithms exploit the statistical properties of the received signals to efficiently derive the optimum sampling time, the carrier frequency offset, and the carrier phase. Among the proposed methods, the mean modulus algorithm (MMA) shows a very robust performance at reduced computational complexity. This is especially important for optical communications where data rates can exceed 100 Gbit/s per wavelength. All proposed algorithms are verified by simulations and by experiments using optical M-ary QAM Nyquist and OFDM signals with data rates up to 84 Gbit/s.

3.
Opt Express ; 22(1): 193-209, 2014 Jan 13.
Article in English | MEDLINE | ID: mdl-24514981

ABSTRACT

We demonstrate two efficient processing techniques for Nyquist signals, namely computation of signals using dynamic precision as well as arbitrary rational oversampling factors. With these techniques along with massively parallel processing it becomes possible to generate and receive high data rate Nyquist signals with flexible symbol rates and bandwidths, a feature which is highly desirable for novel flexgrid networks. We achieved maximum bit rates of 252 Gbit/s in real-time.

4.
Opt Express ; 20(6): 6439-47, 2012 Mar 12.
Article in English | MEDLINE | ID: mdl-22418526

ABSTRACT

We demonstrate for the first time transmission of 54 Gbit/s and 48 Gbit/s over 44 km and 150 km, respectively, utilizing an optical bandwidth of only 3 GHz. We used polarization division multiplexed 512QAM and 256QAM modulation formats in combination with Nyquist pulse shaping having virtually zero roll-off. The resulting spectral efficiencies range up to 18 bit/s/Hz and 16 bit/s/Hz, respectively. Taking into account the overhead required for forward error correction, the occupied signal bandwidth corresponds to net spectral efficiencies of 14.4 bit/s/Hz and 15 bit/s/Hz, which could be achieved in a wavelength division multiplexed network without spectral guard bands.


Subject(s)
Computer Communication Networks/instrumentation , Fiber Optic Technology/instrumentation , Refractometry/instrumentation , Signal Processing, Computer-Assisted/instrumentation , Telecommunications/instrumentation , Computer-Aided Design , Equipment Design , Equipment Failure Analysis , Microwaves , Sample Size
5.
Opt Express ; 20(1): 317-37, 2012 Jan 02.
Article in English | MEDLINE | ID: mdl-22274355

ABSTRACT

Nyquist sinc-pulse shaping provides spectral efficiencies close to the theoretical limit. In this paper we discuss the analogy to optical orthogonal frequency division multiplexing and compare both techniques with respect to spectral efficiency and peak to average power ratio. We then show that using appropriate algorithms, Nyquist pulse shaped modulation formats can be encoded on a single wavelength at speeds beyond 100 Gbit/s in real-time. Finally we discuss the proper reception of Nyquist pulses.


Subject(s)
Algorithms , Models, Theoretical , Signal Processing, Computer-Assisted , Telecommunications , Computer Simulation
6.
Opt Express ; 19(13): 12740-9, 2011 Jun 20.
Article in English | MEDLINE | ID: mdl-21716516

ABSTRACT

Real-time OFDM transmitters breaking the 100 Gbit/s barrier require high-performance, usually FPGA-based digital signal processing. Especially the Fourier transform as a key operation of any OFDM system must be optimized with respect to performance and chip area utilization. Here, we demonstrate an alternative to the widely adopted fast Fourier transform algorithm. Based on an extensive yet optimized use of pre-set look-up tables, our FPGA implementation supports fast reconfigurable channel equalization and switching times in the nanosecond range without re-loading any code. We demonstrate the potential of the concept by realizing the first real-time single polarization OFDM transmitter generating a 101.5 Gbit/s data stream by modulating 58 subcarriers with 16QAM.


Subject(s)
Fourier Analysis , Models, Theoretical , Optics and Photonics/instrumentation , Signal Processing, Computer-Assisted/instrumentation , Telecommunications/instrumentation , Algorithms , Computers , Equipment Design
SELECTION OF CITATIONS
SEARCH DETAIL