Clonal growth characteristics and diversity patterns of different Clintonia udensis (Liliaceae) diploid and tetraploid cytotypes in the Hualongshan Mountains.

Polyploidization plays an important role in plant evolution and biodiversity. However, intraspecific polyploidy compared to interspecific polyploidy received less attention. Clintonia udensis (Liliaceae) possess diploid (2n = 2x = 14) and autotetraploid (2n = 4x = 28) cytotypes. In the Hualongshan Mountains, the autotetraploids grew on the northern slope, while the diploids grew on the southern slopes. The clonal growth characteristics and clonal architecture were measured and analyzed by field observations and morphological methods. The diversity level and differentiation patterns for two different cytotypes were investigated using SSR markers. The results showed that the clonal growth parameters, such as the bud numbers of each rhizome node and the ratio of rhizome branches in the autotetraploids were higher than those in the diploids. Both the diploids and autotetraploids appeared phalanx clonal architectures with short internodes between ramets. However, the ramets or genets of the diploids had a relatively scattered distribution, while those of the autotetraploids were relatively clumping. The diploids and autotetraploids all allocated more biomass to their vegetative growth. The diploids had a higher allocation to reproductive organs than that of autotetraploids, which indicated that the tetraploids invested more resources in clonal reproduction than diploids. The clone diversity and genetic diversity of the autotetraploids were higher than that of the diploids. Significant genetic differentiation between two different cytotypes was observed (P < 0.01). During establishment and evolution, C. udensis autotetraploids employed more clumping phalanx clonal architecture and exhibited more genetic variation than the diploids.

The role of DsbA and PepP genes in the environmental tolerance and virulence factors of Cronobacter sakazakii.

Cronobacter sakazakii, an opportunity foodborne pathogen, could contaminate a broad range of food materials and cause life-threatening symptoms in infants. The bacterial envelope structure contribute to bacterial environment tolerance, biofilm formation and virulence in various in Gram-negative bacteria. DsbA and PepP are two important genes related to the biogenesis and stability of bacterial envelope. In this study, the DsbA and PepP were deleted in C. sakazakii to evaluate their contribution to stress tolerance and virulence of the pathogen. The bacterial environment resistance assays showed DsbA and PepP are essential in controlling C. sakazakii resistance to heat and desiccation in different mediums, as well as acid, osmotic, oxidation and bile salt stresses. DsbA and PepP also played an important role in regulating biofilm formation and motility. Furthermore, DsbA and PepP deletion weaken C. sakazakii adhesion and invasion in Caco-2, intracellular survival and replication in RAW 264.7. qRT-PCR results showed that DsbA and PepP of C. sakazakii played roles in regulating the expression of several genes associated with environment stress tolerance, biofilm formation, bacterial motility and cellular invasion. These findings indicate that DsbA and PepP played an important regulatory role in the environment resisitance, biofilm formation and virulence of C. sakazakii, which enrich understanding of genetic determinants of adaptability and virulence of the pathogen.

The Long-term Visual Quality and Rotational Stability After ICL/TICL V4c Implantation in Individuals With High Myopia Older Than 40 Years.

PURPOSE: To investigate the long-term visual quality and rotational stability after the implantation of Implantable Collamer Lens (ICL) and toric ICL (TICL) (STAAR Surgical) in patients with myopia older than 40 years. METHODS: This study included 82 eyes of 41 patients older than 40 years with myopia who underwent ICL/TICL V4c implantation. The refraction sphere, refraction cylinder, spherical equivalent (SE), uncorrected and corrected distance visual acuity, and anterior segmental parameters were measured preoperatively and at the 1-month, 3-month, and last follow-up visits at 33 to 58 months postoperatively (mean follow-up: 42.56 ± 7.17 months). Wavefront aberrations and TICL rotation were measured using OPD-Scan III (Nidek Co Ltd) at the last follow-up visit. RESULTS: At the last follow-up visit, the overall safety and efficacy index were 1.22 ± 0.26 and 0.88 ± 0.34, respectively, without significant differences between the ICL and TICL groups. Postoperative refraction cylinder was -0.95 ± 0.64 and -0.71 ± 0.54 diopters in the ICL and TICL groups, respectively. The average vault was 467.44 ± 231.98 µm. The average TICL rotation was 5.45 ± 6.61 degrees, positively correlated with the preoperative anterior chamber volume (R2 = 0.1118, P = .026) and clockwise TICL alignment degree (R2 = 0.3110, P = .007) and negatively correlated with the 1-month vault (R2 = 0.1218, P = .008). There were no significant differences in the total, corneal, or internal aberrations and modulation transfer function AreaRatio between the ICL and TICL groups. CONCLUSIONS: Both ICL and TICL presented satisfactory long-term safety, efficacy, and visual quality in patients older than 40 years. Postoperative TICL spontaneous rotation was within the manageable range in the long term. [J Refract Surg. 2024;40(6):e381-e391.].

A Brillouin microscopy analysis of the crystalline lenses of Chinese adults with myopia.

To evaluate lenticular biomechanical and geometric parameters in Chinese adults with myopia and identify relevant factors using Brillouin microscopy (BM) and Pentacam. The biomechanical and geometric properties of the ocular lenses of Chinese adults with myopia were quantified using BM. Anterior segment images were acquired using a Pentacam. Correlated factors including age, sex, spherical equivalent (SE), intraocular pressure (IOP), axial length (AL), white-to-white ratio (WTW), central corneal thickness (CCT), anterior chamber depth (ACD), anterior chamber volume (ACV), and anterior chamber angle (ACA) were analyzed. We studied 65 eyes from 65 participants (mean age, 25.23 ± 6.12 years). Width of Top Plateau (WTP), Width of Bottom Plateau (WBP), Slope of Anterior Cortex (SAC), Slope of Posterior Cortex (SPC), and Height of Plateau (Height) metrics obtained using BM showed mean values of 2.597 ± 0.393 mm, 4.310 ± 0.535 mm, 1.344 ± 0.549 GPa/mm, -1.343 ± 0.480 GPa/mm, and 3.373 ± 0.048 GPa, respectively. No significant correlation was found between these parameters and sex, SE, IOP, CCT, ACA, or Height. Interestingly, WBP (r = 0.467, P < 0.001), SAC (r = 0.412, P = 0.001), and SPC (r = -0.280, P = 0.024) were significantly associated with age, and an age-related increase of WBP (slope of 35.36 ± 10.08 µm per year) was identified. Both ACD and ACV showed significant correlations with SAC (r = 0.329 and 0.380, P = 0.008 and 0.002, respectively), but not with SPC. BM provided a novel perspective on lenticular biomechanical and geometric properties in Chinese adults with myopia, which correlated with age, AL, WTW, ACD, and ACV.

Dual-modified starch as particulate emulsifier for Pickering emulsion: Structure, safety properties, and application for encapsulating curcumin.

In this study, cinnamic acid modified acid-ethanol hydrolyzed starch (CAES) with different degrees of substitution (DS) was fabricated to stabilize Pickering emulsions and probed their application for encapsulating curcumin (Cur). Successful preparation of CAES (with DS from 0.016 to 0.191) was confirmed by 1H NMR and FT-IR, and their physicochemical properties were characterized by XRD, SEM, and TGA. The biosafety evaluations and surface wettability confirmed the excellent safety and amphiphilic character of CAES. CAES-stabilized Pickering emulsion (CS-PE) exhibited different emulsion stability at different DS, with CS-PE (0.031) showing the highest stability. CLSM revealed that the CAES (0.031) formed a dense barrier on the surface of the oil droplets, preventing them from coalescing. The CS-PE (0.031) achieved effective encapsulation of Cur (up to 96.2 %). Compared with free Cur, CS-PE (0.031) exhibited better photochemical stability, higher free fatty acids (FFA) release, and enhanced bioaccessibility. These studies suggested that CAES may serve as a promising emulsifier for stabilizing Pickering emulsions to encapsulate and deliver hydrophobic bioactive compounds.

Non-linear relationship between baseline fasting blood glucose and mortality in peritoneal dialysis patients, a retrospective cohort study.

Background: The relationship between baseline fasting blood glucose (bFBG) and mortality in peritoneal dialysis (PD) patients has been the subject of debate, with limited exploration of the non-linear relationship between bFBG and death in these patients. Methods: This retrospective study categorized patients into four groups based on their bFBG using quartiles. Baseline clinical data at the initiation of dialysis were compared. Survival curves were plotted, and subgroup analyses were stratified by relevant covariates. To address the non-linear relationship, curve fitting and a threshold effect analysis were performed. Results: The study included 379 PD patients with a median follow-up of 41.8 (22.6, 60.1) months. The COX proportional hazards model showed an association between bFBG and the risk of death after adjusting for confounding factors [hazard ratio (HR): 1.22, 95% CI: 1.05-1.41, P = 0.009]. Stratified analyses indicated a stable correlation between bFBG and mortality. The Kaplan-Meier curve analysis revealed significant differences in survival rates among different groups based on bFBG levels (P < 0.01). The curve fitting analysis revealed a U-shaped relationship between bFBG and mortality, with an inflection point at approximately 5.1 mmol/L. Conclusion: Our study has demonstrated a non-linear relationship between bFBG and mortality in PD patients. Additionally, we have found that the optimal bFBG value associated with the lowest risk of mortality is approximately 5.1 mmol/L.

The rate of vault changes after ICL V4c implantation and its correlation with anterior segment parameters.

Purpose: To investigate the rate of vault changes after implantation of ICL V4c and the correlation with anterior segment parameters. Methods: A total of 64 eyes were studied from the 37 myopic subjects recruited. CASIA2 was used to record the vault at 1 week, 1 month, 3 months and 6 months after the operation as well as the preoperative anterior segment parameters including pupil diameter, lens vault, anterior chamber depth, anterior chamber width, iris area (IA), iris thickness, angle opening distance, angle recess area, trabecular iris space area, and trabecular iris angle. The rates of vault change in different time intervals were compared and the correlations between the rates and anterior segment parameters were analyzed. P < 0.05 was considered statistically significant. Results: The rate of vault decrease was -19.53 ± 111.28 µm/month between 1 week and 1 month, -19.90 ± 29.71 µm/month between 1 month and 3 months and -4.25 ± 18.10 µm/month between 3 months and 6 months; hence the rate was shown to slow down significantly from 3 months post-operation (P = 0.024). The average rate of vault changes showed a significant positive correlation with IA (R2 = 0.140, F = 4.980, P = 0.01). No significant correlation was found with other anterior segment parameters (all P > 0.05). Conclusion: The rate of decreasing vault significantly slowed down from 3 months post-operation. A larger IA may imply a lower decreasing rate of vault change.

Influence of corneal diameter on the accuracy of corneal tomography in patients with forme fruste keratoconus or thin corneas.

CLINICAL RELEVANCE: The detection of subclinical ectasia is important in preoperative screening for laser-refractive surgery. Previous studies have confirmed the impact of corneal diameter on the diagnostic accuracy of several ectasia indices in tomographically normal eyes. BACKGROUND: This study aimed to investigate the influence of corneal diameter on the diagnostic accuracy of Pentacam tomographic indices in eyes with forme fruste keratoconus (FFKC) and thin corneas. METHODS: One hundred and one eyes of 101 patients with FFKC (FFKC group), 104 eyes of 104 patients with a corneal thickness <490 µm (thin cornea group), and 200 eyes of 200 normal subjects (normal group) were analysed in the study. Pentacam ectasia indices were compared between the groups. RESULTS: The results of multiple linear regression analysis showed that the standardised coefficients for corneal diameter and overall deviation of normality (BAD-D) were -0.386, -0.552, and -0.552 for the FFKC, thin cornea, and normal groups, respectively (p < 0.001). Comparing for the classifications (normal versus abnormal) of the individual indices demonstrated that for corneal diameters ≤11.9 mm, the rates of abnormal cases were significantly higher in the FFKC group than in the normal group for seven indices and in the thin cornea group than normal group for nine indices. For corneal diameters >11.9 mm, the rates of abnormal cases were higher in the FFKC than normal group for three indices and higher in the thin cornea group than normal group for seven indices. CONCLUSION: Belin/Ambrosio Enhanced Ectasia display indices may underestimate the risk of ectasia in patients with large corneas, especially those with FFKC.

Risk factors associated with haptic malposition in eyes implanted with implantable collamer lenses.

PURPOSE: To examine the risk factors for haptic malposition in eyes with implantable collamer lens (ICL). SETTING: Eye and ENT Hospital, Fudan University, Shanghai, China. DESIGN: Prospective nonrandomized observational study. METHODS: This study included 134 (77.9%) of 172 initially enrolled patients who underwent ICL implantation and completed a 1-year follow-up. The extent of haptics present in the ciliary sulcus (ICS) was measured. Patients were categorized based on ICS count (0 to 4). The position of the haptics was quantified as the distance between the iris root and the terminal tip of ICL haptics (iris root to haptic tip, IRH). The related factors to the ICS count and its correlation with the central vault were analyzed. RESULTS: ICS distribution was 0 ICS in 19 eyes (14.2%), 1 in 22 eyes (16.4%), 2 in 32 eyes (23.9%), 3 in 29 eyes (21.6%), and 4 in 32 eyes (23.9%). Parameters like maximum ciliary body thickness (CBTmax, P = .008), iris-ciliary process distance (ICPD, P < .001), and ciliary process length ( P = .034) varied significantly across ICS groups. A multiple linear regression analysis revealed that the iris-ciliary angle ( P = .006), CBTmax ( P = .007), the distance between the sulcus-to-sulcus plane and the anterior crystalline lens surface (STSL, P = .035), and ICL size ( P = .015) were significantly associated with IRH. Spherical equivalents ( P = .042), STSL ( P = .001), and ICS count ( P = .020) significantly correlated with the central vault. CONCLUSIONS: Shortened ciliary process is a primary risk for haptic malposition. The ICS count significantly relates to the central vault.

Development and validation of a deep learning model to predict axial length from ultra-wide field images.

BACKGROUND: To validate the feasibility of building a deep learning model to predict axial length (AL) for moderate to high myopic patients from ultra-wide field (UWF) images. METHODS: This study included 6174 UWF images from 3134 myopic patients during 2014 to 2020 in Eye and ENT Hospital of Fudan University. Of 6174 images, 4939 were used for training, 617 for validation, and 618 for testing. The coefficient of determination (R2), mean absolute error (MAE), and mean squared error (MSE) were used for model performance evaluation. RESULTS: The model predicted AL with high accuracy. Evaluating performance of R2, MSE and MAE were 0.579, 1.419 and 0.9043, respectively. Prediction bias of 64.88% of the tests was under 1-mm error, 76.90% of tests was within the range of 5% error and 97.57% within 10% error. The prediction bias had a strong negative correlation with true AL values and showed significant difference between male and female (P < 0.001). Generated heatmaps demonstrated that the model focused on posterior atrophy changes in pathological fundus and peri-optic zone in normal fundus. In sex-specific models, R2, MSE, and MAE results of the female AL model were 0.411, 1.357, and 0.911 in female dataset and 0.343, 2.428, and 1.264 in male dataset. The corresponding metrics of male AL models were 0.216, 2.900, and 1.352 in male dataset and 0.083, 2.112, and 1.154 in female dataset. CONCLUSIONS: It is feasible to utilize deep learning models to predict AL for moderate to high myopic patients with UWF images.

Comparison of corneal and lens density measurements obtained by Pentacam and CASIA2 in myopes.

PURPOSE: To investigate the agreement between Pentacam and CASIA2 in the evaluation of corneal densities (CDs) and lens densities (LDs) in myopes. METHODS: Fifty-three patients (106 eyes) underwent comprehensive ophthalmologic examinations. CDs and LDs were measured using Pentacam and CASIA2, respectively, based on the grayscale percentage of the obtained images. Agreement between Pentacam and CASIA2 was evaluated using the consistency intraclass correlation coefficient (ICC) and represented using Bland-Altman plots. RESULTS: Compared to Pentacam, CASIA2 showed significantly higher CD and LD values in all measured zones. The ICC of the average CD and LD measured by the Pentacam and CASIA2 were 0.726 and 0.757, respectively. The ICC values of all corneal zones and lenses were above 0.7, except for the measurement of the cornea in the 0-2 mm zone (0.455), suggesting good consistency between the two devices, whose results were of different levels of linear correlation. Bland-Altman plots showed mean percentages of 3.93% for the points falling outside the limits of agreement among the densitometry results. The ICCs in different age groups were similar, but the agreement was poorer in the high myopia group (low and moderate myopia, CD: 0.739, LD: 0.753; high myopia, CD: 0.621, LD: 0.760). CONCLUSIONS: CASIA2 demonstrated good consistency with Pentacam in the measurement of CD and LD, except for measurement of CD in the central cornea and in high myopia. Despite difference in the numerical results compared with Pentacam, which made the two devices uninterchangeable, CASIA2 provides a reliable alternative densitometric measurement method.

Myopic Vascular Changes Revealed by Optical Tomography Angiography and Their Association with Myopic Fundus Manifestations.

INTRODUCTION: We aimed to quantify and evaluate fundal vascular changes at different severities of myopia using optical tomography angiography (OCTA) and explore their association with fundus changes captured by ultra-widefield (UWF) fundus cameras. METHODS: Seventy-four participants with myopia were enrolled in the study and underwent basic ophthalmic examination, OCTA, and UWF fundus photography. Multiple parameters were obtained using OCTA (flow area, structure thickness, and vessel density) and UWF fundus cameras (tessellation and parapapillary atrophy [PPA]). RESULTS: The right eye of 30 participants with low and moderate myopia and 44 participants with high myopia (HM) were included. Patients with HM had a larger flow area of the outer retina (FA-OR) and a smaller thickness of choroid (TC). Axial length was significantly correlated with retinal and choroidal flow area and thickness in the different zones. The PPA area was positively correlated with FA-OR and negatively correlated with TC. Tessellation exhibited different levels of correlation with OCTA parameters regarding the flow area, thickness, and vessel density of the fundal layers, mainly in the inner retina. CONCLUSION: FA-OR and TC exhibited sensitive changes in patients with HM and axial elongation; therefore, they could serve as predictive OCTA biomarkers. The PPA and tessellation were connected to the vascular and structural changes revealed by OCTA.

Predicting Vault and Size of Posterior Chamber Phakic Intraocular Lens Using Sulcus to Sulcus-Optimized Artificial Intelligence Technology.

PURPOSE: To investigate the accuracy of posterior chamber phakic intraocular lens (PIOL) vault and size prediction models based on sulcus to sulcus (STS) optimized artificial intelligence and big data analysis technology. DESIGN: Big data and artificial intelligence prediction model. METHODS: We included 5873 eyes with posterior chamber PIOL implantation, and the postoperative vault was measured using an anterior segment analyzer (Pentacam AXL) 1 month postoperatively. A random forest regression model and classification model were used to predict the postoperative vault and PIOL size. The postoperative vault and PIOL size were set as output features; other vault-related eye parameters were set as input features. The influence of white to white (WTW), horizontal sulcus to sulcus (STS), and vertical STS on predicting postoperative vault and PIOL size was analyzed and compared. RESULTS: The mean preoperative WTW diameter was 11.64 ± 0.37 mm, the mean horizontal STS diameter was 11.85 ± 0.47 mm, and the mean vertical STS diameter was 12.39 ± 0.52 mm. In the regression model for numerical prediction of the vault, the combination of WTW, horizontal STS, and vertical STS was the most optimal for vault prediction (R2 = 0.3091, root mean square error [RMSE] = 0.1705); solely relying on WTW was the least optimal (R2 = 0.2849, RMSE = 0.1735). Among the models for classification prediction of the vault, the combination of WTW, horizontal STS, and vertical STS was the most accurate (accuracy, 0.6302; mean area under the curve, 0.8008; and mean precision recall rate, 0.6940). Moreover, the combination of WTW, horizontal STS, and vertical STS exhibited the highest accuracy for classification prediction of PIOL size (accuracy, 0.8170; mean area under the curve, 0.9540; and mean precision recall rate, 0.8864). Whether in the regression prediction models of vault values or in the classification prediction models of vault and PIOL size, the accuracy of STS optimized model was significantly improved compared with the traditional WTW model (P < .001). CONCLUSION: Artificial intelligence combined with STS optimization contributes to the accuracy of PIOL size and vault prediction models. The random forest machine-learning model optimized by STS is superior to the traditional WTW model.

Four-year visual outcomes and optical quality of SMILE and implantable collamer lens V4c (EVO-ICL) implantation for high myopia: a retrospective study.

BACKGROUND: To compare the 4-year visual outcomes of implantable collamer lens V4c (EVO-ICL) implantation and small incision lenticule extraction (SMILE) for high myopia and astigmatism. METHODS: This retrospective case study included 64 eyes of 40 patients. These patients with preoperative manifest refraction spherical equivalent (SE) between - 6.00 and - 10.00 diopters (D) were screened from the database of SMILE and EVO-ICL implantation procedures in 2015. The ICL group [32 eyes of 19 patients (mean age, 29.6 ± 6.3 years); mean SE, -8.71 ± 1.06 D] and SMILE group [32 eyes of 21 patients (mean age, 27.7 ± 5.6 years); mean SE, -8.35 ± 0.65D] were compared. All patients were then prospectively examined at a four-year follow-up for routine postoperative examinations, higher-order ocular aberrations, retinal image quality and a questionnaire. RESULTS: The safety indexes were 1.15 ± 0.14 and 1.22 ± 0.21 (P = 0.36) for the SMILE and ICL groups, respectively. No eyes lost two or more lines of CDVA in either group. The efficacy indexes were 0.97 ± 0.16 and 0.96 ± 0.19 (P = 0.87), respectively. Twenty-three eyes (72%) in ICL and 26 eyes (81%) in SMILE groups were within ± 0.5 D of the attempted SE (P < 0.01). ICL-treated eyes had significantly less spherical aberration and coma (P < 0.01 and < 0.05, respectively) postoperatively. Halos were the prevalent visual disturbance in both groups. CONCLUSION: SMILE and EVO-ICL implantation provided safe and effective correction of high myopia. SMILE showed slightly better long-term predictability. Mild postoperative visual disturbances were observed after ICL and SMILE at 4-year follow-up.

Binocular imbalance in patients after implantable collamer lens V4c implantation or femtosecond laser-assisted in situ keratomileusis for myopia with presbyopia.

Aim: To investigate the long-term safety, efficacy, and binocular balance of monovision surgery using Implantable Collamer Lens (ICL) V4c implantation and Femtosecond Laser-Assisted in situ Keratomileusis (FS-LASIK) for the treatment of myopic patients with presbyopia. Methods: This case series study involved 90 eyes of 45 patients (male/female = 19/26; average age:46.27 ± 5.54 years; average follow-up time:48.73 ± 14.65 months) who underwent the aforementioned surgery to treat myopic presbyopes. Data on manifest refraction, corrected distance visual acuity, dominant eye, presbyopic addition, intraocular pressure, and anterior segment biometric parameters were collected. The visual outcomes and binocular balance at 0.4 m, 0.8 m, and 5 m were documented. Results: The safety index for the ICL V4c and FS-LASIK groups were 1.24 ± 0.27 and 1.04 ± 0.20 (p = 0.125), respectively. Binocular visual acuity (logmar) for 0.4 m, 0.8 m, and 5 m were -0.03 ± 0.05, -0.03 ± 0.02, and 0.10 ± 0.03 for the ICL V4c group, and -0.02 ± 0.09, -0.01 ± 0.02, and 0.06 ± 0.04 for the FS-LASIK group, respectively. The proportions of all patients with imbalanced vision at 0.4 m, 0.8 m, and 5 m distances were 68.89, 71.11, and 82.22%, respectively (all p > 0.05 between the two groups). There were significant differences in refraction between the balanced and imbalanced vision for patients at 0.4 m distance (for non-dominant eye spherical equivalent [SE]: -1.14 ± 0.17D and -1.47 ± 0.13D, p < 0.001), 0.8 m distance (for preoperative ADD:0.90 ± 0.17D and 1.05 ± 0.11D, p = 0.041), and 5 m distance (for non-dominant SE: -1.13 ± 0.33D and -1.42 ± 0.11D, p < 0.001). Conclusion: ICL V4c implantation and FS-LASIK monovision treatment demonstrated good long-term safety and binocular visual acuity at various distances. After the procedure, the imbalanced patients' vision is primarily related to the age-related presbyopia and anisometropia progression caused by the monovision design.

Precision of Corneal Aberrations Measured by a New SD-OCT/Placido Topographer and Its Agreement With a Scheimpflug/Placido Topographer.

PURPOSE: To evaluate the precision of corneal aberrations measured by a new SD-OCT/Placido topographer, the MS-39 (CSO), and to compare them with those provided by a Scheimpflug/Placido device, the Sirius (CSO), in normal eyes. METHODS: This study enrolled 90 normal eyes of 90 patients. Total root mean square (RMS), higher order RMS, coma, trefoil, spherical aberration, and astigmatism II were analyzed. The within-subject standard deviation (Sw), test-retest repeatability, and intraclass correlation coefficient (ICC) were calculated to assess the precision. Bland-Altman plots and 95% limits of agreement (LoAs) were calculated to assess the agreement. RESULTS: For intraobserver repeatability of anterior and total corneal aberrations, most of the ICCs were greater than 0.869, except for trefoil and astigmatism II. Regarding the posterior corneal surface, the ICCs of total RMS, coma, and spherical aberration were higher than 0.878, whereas the ICCs of higher order RMS, trefoil, and astigmatism II were lower than 0.626. All test-retest repeatability values were 0.17 µm or less. In terms of interobserver reproducibility, the Sw values were 0.04 µm or less, Test-retest repeatability values were less than 0.11 µm, and all ICCs ranged from 0.532 to 0.996. Regarding agreement, 95% LoAs were small for all Zernike coefficients, and the mean difference was close to zero. CONCLUSIONS: The new SD-OCT/Placido device exhibited excellent repeatability and reproducibility for anterior and total surface, whereas total RMS, coma, and spherical aberrations showed high precision on the posterior surface. High agreement was confirmed between the SD-OCT/Placido and Scheimpflug/Placido devices. [J Refract Surg. 2023;39(6):405-412.].

Primary observations of EVO ICL implantation for high myopia with concave iris.

PURPOSE: To investigate the morphological changes of concave iris in myopic patients after EVO implantable collamer lens (ICL) implantation. METHODS: EVO ICL candidates with posterior bowing iris were observed using ultrasound biometric microscopy (UBM) in this prospective nonrandomized observational study. Forty patients were enrolled, with 20 patients in the concave iris group and the other 20 patients in the control group. None of the patients underwent laser peripheral iridotomy. All patients received preoperative and postoperative examinations, which included uncorrected distance visual acuity (UDVA), corrected distance visual acuity (CDVA), subjective manifest refraction and intraocular pressure. UBM was used to observe iris curvature (IC), irido-corneal angle (ICA), posterior chamber angle (PCA), iris-lens contact distance (ILCD), iris-zonule distance (IZD) and ciliary process length (CPL). Anterior chamber angle pigment was observed by gonioscopy. The preoperative and postoperative data were analyzed using SPSS. RESULTS: The average follow-up period was 13.3 ± 5.3 months. The mean efficacy indices were 1.10 ± 0.13 and 1.07 ± 0.11 (P = 0.58), and the safety indices were 1.19 ± 0.09 and 1.18 ± 0.17 in the control group and the concave iris group (P = 0.93), respectively. The IOP postoperatively were 14.13 ± 2.02 mmHg and 14.69 ± 1.59 mmHg in control and concave iris groups (P = 0.37). Preoperatively, the concave iris group was presented with greater IC (P < 0.0001), longer ILCD (P < 0.0001), wider ICA (P = 0.004), narrower PCA (P = 0.01), and shorter IZD (P = 0.03) than the control group. In the concave iris group, IC, ILCD and ICA were significantly decreased after ICL implantation (P < 0.0001), while PCA and IZD were significantly increased (P = 0.03 and P = 0.04, respectively). Postoperative IC, ILCD, ICA, PCA and IZD were not statistically different between groups (P > 0.05). There was no significant difference in pigment deposition grades between the two groups (P = 0.37). CONCLUSION: After EVO ICL implantation, the morphology of concave iris was significantly improved, which may reduce the risk of intraocular pigment dissemination caused by iris concavity. The concave iris has no impact on the safety of EVO ICL surgery during the follow-up.

Artificial intelligence-based refractive error prediction and EVO-implantable collamer lens power calculation for myopia correction.

BACKGROUND: Implantable collamer lens (ICL) has been widely accepted for its excellent visual outcomes for myopia correction. It is a new challenge in phakic IOL power calculation, especially for those with low and moderate myopia. This study aimed to establish a novel stacking machine learning (ML) model for predicting postoperative refraction errors and calculating EVO-ICL lens power. METHODS: We enrolled 2767 eyes of 1678 patients (age: 27.5 ± 6.33 years, 18-54 years) who underwent non-toric (NT)-ICL or toric-ICL (TICL) implantation during 2014 to 2021. The postoperative spherical equivalent (SE) and sphere were predicted using stacking ML models [support vector regression (SVR), LASSO, random forest, and XGBoost] and training based on ocular dimensional parameters from NT-ICL and TICL cases, respectively. The accuracy of the stacking ML models was compared with that of the modified vergence formula (MVF) based on the mean absolute error (MAE), median absolute error (MedAE), and percentages of eyes within ± 0.25, ± 0.50, and ± 0.75 diopters (D) and Bland-Altman analyses. In addition, the recommended spheric lens power was calculated with 0.25 D intervals and targeting emmetropia. RESULTS: After NT-ICL implantation, the random forest model demonstrated the lowest MAE (0.339 D) for predicting SE. Contrarily, the SVR model showed the lowest MAE (0.386 D) for predicting the sphere. After TICL implantation, the XGBoost model showed the lowest MAE for predicting both SE (0.325 D) and sphere (0.308 D). Compared with MVF, ML models had numerically lower values of standard deviation, MAE, and MedAE and comparable percentages of eyes within ± 0.25 D, ± 0.50 D, and ± 0.75 D prediction errors. The difference between MVF and ML models was larger in eyes with low-to-moderate myopia (preoperative SE > - 6.00 D). Our final optimal stacking ML models showed strong agreement between the predictive values of MVF by Bland-Altman plots. CONCLUSION: With various ocular dimensional parameters, ML models demonstrate comparable accuracy than existing MVF models and potential advantages in low-to-moderate myopia, and thus provide a novel nomogram for postoperative refractive error prediction and lens power calculation.

Morphometric Assessment of the Ciliary Body in Patients With Marfan Syndrome and Ectopia Lentis: A Quantitative Study Using Ultrasound Biomicroscopy.

PURPOSE: To explore the biometric characteristics of the ciliary body in patients with Marfan syndrome (MFS) and ectopia lentis (EL). DESIGN: Cross-sectional study. METHODS: Seventy-two consecutive patients with MFS and EL and 72 nondiseased control subjects were recruited. Ciliary body biometric parameters such as ciliary muscle cross-sectional area at 2000 µm from the scleral spur (CMA2000), ciliary muscle thickness at 1000 µm from the scleral spur (CMT1000), and maximum ciliary body thickness (CBTmax) were measured from multiple directions with ultrasound biomicroscopy (UBM). The relationship between ciliary body parameters and other ocular characteristics was also evaluated. RESULTS: Average CMA2000, CMT1000, and CBTmax were 0.692 ± 0.015 mm2, 0.405 ± 0.010 mm, and 0.855 ± 0.023 mm in eyes of patients with MFS, respectively, and were significantly smaller than these values in control subjects (all P < .001). The prevalence of ciliary body thinning was 22.2% in the MFS group vs 0 in the control group (P < .001); eyes with more severe EL had smaller CMA2000 (P = .050), thinner CMT1000 (P = .022), and shorter CBTmax (P = .015). Patients with microspherophakia (MSP) had even smaller CMA2000 (P = .033) and CMT1000 (P = .044) than those without MSP. The most common subluxation direction was in the superonasal quadrant (n = 25; 39.7%), which probably correlates with the thinnest CMT1000 in the inferotemporal quadrant (P = .005). CONCLUSIONS: Patients with MFS and EL had thinner ciliary muscles, shorter ciliary processes, and a higher prevalence of ciliary body thinning, especially those with MSP. Both the extent and direction of subluxation were associated with ciliary body biometry..

Anterior Segment Characteristics of Eyes with Anterior Chamber Depth Less than 2.8 mm and Axial Length Greater than 25 mm.

INTRODUCTION: This study aimed to investigate anterior segment parameters of eyes, with anterior chamber depth (ACD) less than 2.8 mm and axial length greater than 25.0 mm. METHODS: This cross-sectional study included 180 myopic eyes of 180 consecutive patients with axial length greater than 25.0 mm. Patients were divided into low ACD (ACD < 2.8 mm, n = 56) and normal ACD (ACD ≥ 2.8 mm, n = 124) groups. Anterior segment parameters were measured using Scheimpflug imaging and ultrasound biomicroscopy. A general linear model was used to compare parameters between the two groups, after adjusting for age and spherical equivalent. RESULTS: Compared with the normal ACD group, the low ACD group had lower values for the following parameters: corneal diameter, trabecular-anterior iris surface angle, angle-opening distance at 500 µm, anterior chamber volume, anterior chamber width, anterior vault, iris thickness at 500 µm, ciliary sulcus-to-sulcus diameter, distance between cornea and sulcus, trabecular-ciliary process distance, maximum ciliary body thickness, ciliary process length, relative anterior vault, relative distance between cornea and sulcus, and relative lens position (general linear model, p < 0.05). In contrast, central corneal thickness, iris curvature, lens thickness, lens vault, and iris-ciliary angle were greater in the low ACD group (general linear model, p < 0.05). CONCLUSION: A smaller anterior segment, as well as a thicker and more anteriorly positioned lens, may correlate with shallow ACD in eyes with long axial length.