Ultrahigh Energy Storage Performance of BiFeO3-BaTiO3 Flexible Film Capacitor with High-Temperature Stability via Defect Design.

Nanoengineering polar oxide films have attracted great attention in energy storage due to their high energy density. However, most of them are deposited on thick and rigid substrates, which is not conducive to the integration of capacitors and applications in flexible electronics. Here, an alternative strategy using van der Waals epitaxial oxide dielectrics on ultra-thin flexible mica substrates is developed and increased the disorder within the system through high laser flux. The introduction of defects can efficiently weaken or destroy the long-range ferroelectric ordering, ultimately leading to the emergence of a large numbers of weak-coupling regions. Such polarization configuration ensures fast polarization response and significantly improves energy storage characteristics. A flexible BiFeO3-BaTiO3 (BF-BT) capacitor exhibits a total energy density of 43.5 J cm-3 and an efficiency of 66.7% and maintains good energy storage performance over a wide temperature range (20-200 °C) and under large bending deformation (bending radii ≈ 2 mm). This study provides a feasible approach to improve the energy storage characteristics of dielectric oxide films and paves the way for their practical application in high-energy density capacitors.

Antibiotic prophylaxis for surgical wound infections in clean and clean-contaminated surgery: an updated systematic review and meta-analysis.

BACKGROUND: The efficacy and necessity of prophylactic antibiotics in clean and clean-contaminated surgery remains controversial. METHODS: The studies were screened and extracted using databases including PubMed, Embase, Cochrane Library, Web of Science, and Clinical Trials.gov according to predefined eligibility criteria. Randomized controlled trials (RCTs) comparing the effect of preoperative and postoperative prophylactic antibiotic use on the incidence of surgical site infections (SSIs) in patients undergoing any clean or clean-contaminated surgery. RESULTS: A total of 16,189 participants in 48 RCTs were included in the primary meta-analysis following the eligibility criteria. The pooled odds ratio (OR) for SSI with antibiotic prophylaxis versus placebo was 0.60 (95% CI: 0.53-0.68). The pooled OR among gastrointestinal, oncology, orthopedics, neurosurgery, oral, and urology surgery was 3.06 (95% CI: 1.05-8.91), 1.16 (95% CI: 0.89-1.50), 2.04 (95% CI: 1.09-3.81), 3.05 (95% CI: 1.25-7.47), 3.55 (95% CI: 1.78-7.06), and 2.26 (95% CI: 1.12-4.55), respectively. Furthermore, the summary mean difference (MD) for patients' length of hospitalization was -0.91 (95% CI: -1.61, -0.16). The results of sensitivity analyses for all combined effect sizes showed good stability. CONCLUSION: Antibiotics are both effective, safe, and necessary in preventing surgical wound infections in clean and clean-contaminated procedures, attributed to their reduction in the incidence of surgical site infections as well as the length of patient hospitalization.

Spatial evolution of the proton-coupled Mott transition in correlated oxides for neuromorphic computing.

The proton-electron coupling effect induces rich spectrums of electronic states in correlated oxides, opening tempting opportunities for exploring novel devices with multifunctions. Here, via modest Pt-aided hydrogen spillover at room temperature, amounts of protons are introduced into SmNiO3-based devices. In situ structural characterizations together with first-principles calculation reveal that the local Mott transition is reversibly driven by migration and redistribution of the predoped protons. The accompanying giant resistance change results in excellent memristive behaviors under ultralow electric fields. Hierarchical tree-like memory states, an instinct displayed in bio-synapses, are further realized in the devices by spatially varying the proton concentration with electric pulses, showing great promise in artificial neural networks for solving intricate problems. Our research demonstrates the direct and effective control of proton evolution using extremely low electric field, offering an alternative pathway for modifying the functionalities of correlated oxides and constructing low-power consumption intelligent devices and neural network circuits.

Functional Interface for Glycoprotein Sensing: Focusing on Biosensors.

Glycosylated proteins or glycoproteins make up a large family of glycoconjugates, and they participate in a variety of fundamental biological events. Glycoproteins have become important biomarkers in the diagnosis and treatment of a number of tumors. Biosensors are quite suitable for glycoprotein detection. The design and fabrication of a functional sensing interface play a crucial role in the biosensor construction to target glycoproteins. The functional interface, particularly receptors, typically determines the key characteristics of a biosensor, such as selectivity and sensitivity. Antibody, peptide, aptamer, boronic acid derivative, lectin, and molecularly imprinted polymer are all capable receptors for glycoprotein recognition, and each of these will be discussed. Most glycoproteins exist in low abundance, thus rendering signal amplification techniques indispensable. Nucleic acid-mediated and nanomaterial-mediated signal amplification for the detection of glycoproteins will be focused on herein. This review aims to highlight these different functional interfaces for glycoprotein sensing.

Electrochemical Impedimetric Platform Based on Con A@MIL-101 for Glycoprotein Detection.

An electrochemical impedimetric biosensing platform with lectin as a molecular recognition element has been established for the sensitive detection of glycoproteins, a class of important biomarkers in clinical diagnosis. One of the representative metal-organic framework materials, MIL-101(Cr)-NH2, was utilized as the supporting matrix, and its amino groups served as the anchors to immobilize the lectins of concanavalin A (Con A), constituting Con A@MIL-101(Cr)-NH2 for the determination of invertase (INV) as a model glycoprotein. The Con A concentration, immobilization time, and incubation time with INV were optimized. Under the optimal conditions, the degree of impedance increase was linearly proportional to the logarithm of INV concentration between 1.0 × 10-16 and 1.0 × 10-11 M, affording a limit of detection as low as 3.98 × 10-18 M. Good specificity, stability, reproducibility, and repeatability were demonstrated for the fabricated biosensing platform. Moreover, real mouse serum samples were spiked with different concentrations of INV. Excellent recoveries were obtained, which demonstrated the biosensing platform's capability of analyzing glycoproteins within a complex matrix.

Two-dimensional transmissive structural colors for high-security information encryption.

Structural colors produced from nanostructures have attracted much attention due to their promising advantages of long-term stability and high resolution. Many nanostructures like metasurfaces have been demonstrated to generate color information in the transmission or reflection mode. Here, a strategy of combining polarization-insensitive and polarization-sensitive transmissive structural color is proposed to realize convenient and diverse encrypted pattern designs. A two-dimensional metasurface, whose polarization characteristics are determined by the size of a nanobrick unit, is embedded inside an optical cavity to produce transmissive structural color. The polarization-insensitive transmissive structural color exhibits a wide color gamut and high excitation purity in all polarization states, while the polarization-sensitive transmissive structural color maintains the similar color appearance in x-direction polarization but appears nearly black in y-direction polarization. Combining these two transmissive structural colors can achieve diverse images designed at different polarizations instead of simply hiding the image in a specific polarization state. An image of "flower and flowerpot" using the generated colors is visually illustrated, which shows that the proposed transmissive structural colors would have great potential in the areas of security information encryption.

Recyclable ferroferric oxide@titanium dioxide@molybdenum disulfide with enhanced enzyme-like activity under visible light for effectively inhibiting the growth of drug-resistant bacteria in sewage.

With the development of social industry and the increase in domestic sewage discharge, pathogenic bacterial contamination in water has become a serious health and environmental problem. It is important to design sewage treatment reagents with effective pathogenic bacterial removal and recyclability. In this work, we developed a nanocomposite, Fe3O4@TiO2@MoS2, with once-for-all effects of photocatalytic, magnetic, and peroxidase-like activities for solving the above-mentioned problems. The loading of MoS2 may cause the band gap of Fe3O4@TiO2 to decrease from 3.11 eV to 2.85 eV, demonstrating increased photocatalytic activity under visible light, based on the synergistic impact of Fe3O4@TiO2 and MoS2. In return, the peroxidase-like activity of Fe3O4@TiO2@MoS2 was significantly higher than that of Fe3O4 and MoS2 alone, resulting in the generation of more hydroxyl radicals (˙OH) for combating the drug-resistant broad-spectrum ß-lactamase-producing Escherichia coli and methicillin-resistant Staphylococcus aureus. The antibacterial mechanism study showed that Fe3O4@TiO2@MoS2 could effectively inhibit bacterial growth by destroying the bacterial biofilm and genome via the peroxidase-like activity as well as photocatalytic activity. In addition, Fe3O4@TiO2@MoS2 has excellent paramagnetic properties, which can achieve magnetic recovery after wastewater treatment. Even after three times of recycling, its antibacterial effect can remain above 98.8%.

Fu-Huang ointment ameliorates impaired wound healing associated with diabetes through PI3K-AKT signalling pathway activation.

A diabetic ulcer (DU) is a dreaded and resistant complication of diabetes mellitus with high morbidity. Fu-Huang ointment (FH ointment) is a proven recipe for treating chronic refractory wounds; however, its molecular mechanisms of action are unclear. In this study, we identified 154 bioactive ingredients and their 1127 target genes in FH ointment through the public database. The intersection of these target genes with 151 disease-related targets in DUs resulted in 64 overlapping genes. Overlapping genes were identified in the PPI network and enrichment analyses. The PPI network identified 12 core target genes, whereas Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis indicated that upregulation of the PI3K/Akt signalling pathway was involved in the role of FH ointment in treating diabetic wounds. Molecular docking showed that 22 active compounds in FH ointment could enter the active pocket of PIK3CA. Molecular dynamics was used to prove the binding stability of the active ingredients and protein targets. We found that PIK3CA/Isobutyryl shikonin and PIK3CA/Isovaleryl shikonin combinations had strong binding energies. An in vivo experiment was conducted on PIK3CA, which was the most significant gene.This study comprehensively elucidated the active compounds, potential targets, and molecular mechanism of FH ointment application in treating DUs, and believed that PIK3CA is a promising target for accelerated healing.

Bis-enzyme cascade CRISPR-Cas12a platform for miRNA detection.

MicroRNA (miRNA) play a vital role in the pathological development of many diseases. It is considered to be the diagnosis and potential biomarkers of prognosis. Herein, we proposed Bis-enzyme cascade Platform by combining T7 RNA polymerase and CRISPR-Cas12a (BPTC) for a miRNA detection. In the proposed BPTC, the RNA to DNA conversion ability of phi29 amplification and trans-cleavage of CRISPR-Cas12a are combined. The target miRNA can be amplified after binding to the recognizer ssDNA, and then transcribed the CRISPR-derived RNA (crRNA) by T7 RNA polymerase. The produced crRNA can thereby be assembled by CRISPR-Cas12a and recognized with its target dsDNA, thus triggered its trans-cleavage towards surrounding fluorescent reporters, labeled with a fluorophore and a corresponding quenching group. Based on the bis-enzyme cascade system, the biosensor shows highly sensitivity and excellent specificity. Moreover, this study provided a novel all-in-one detect strategy for miRNA and may open a new idea for the design of CRISR-Cas-based miRNA biosensing platforms.

Prevalence of depression, anxiety in China during the COVID-19 pandemic: an updated systematic review and meta-analysis.

Background: Mental health risks associated with the aftermath of the COVID-19 pandemic are often overlooked by the public. The aim of this study was to investigate the effects of the COVID-19 pandemic on depression and anxiety disorders in China. Methods: Studies were analyzed and extracted in accordance with the PRISMA 2020 flowchart. The studies were screened and extracted using electronic databases including PubMed, Web of Science, Embase, Cochrane Library, and ClinicalTrials.gov according to the predefined eligibility criteria. The Cochrane Review Manager software 5.3.1 was used for data analysis and the risk of bias assessment. Results: As of 2023, a total of 9,212,751 Chinese have been diagnosed with COVID-19 infection. A total of 913,036 participants in 44 studies were selected following the eligibility criteria, the statistical information of which was collected for meta-analysis. The pooled prevalence of depression and anxiety were 0.31 (95% CI: 0.28, 0.35; I2 = 100.0%, p < 0.001) and 0.29 (95% CI: 0.23, 0.36; I2 = 100.0%, p < 0.001), respectively. After performing a subgroup analysis, the prevalence of depression among women, healthcare workers, students, and adolescents was 0.31 (95% CI: 0.22, 0.41), 0.33 (95% CI: 0.26, 0.44), 0.32 (95% CI: 0.26, 0.39), and 0.37 (95% CI: 0.31, 0.44), respectively. Conclusion: The prevalence of depression and anxiety among the Chinese was overall high. Monitoring and surveillance of the mental health status of the population during crises such as sudden global pandemics are imperative. Systematic review registration: https://clinicaltrials.gov/, identifier [CRD42023402190].

Laser-Induced Forward Transferred Optical Scattering Nanosilica for Transparent Displays.

Laser printing has become a promising alternative for large-scale fabrication of functional devices. Here, laser-induced forward transfer (LIFT) of nanosilica was successfully achieved using a lower-cost nanosecond laser with a center wavelength of 1064 nm. To enhance the light absorption of silica, a small amount of graphene oxide (GO) was added to the fumed silica. Investigations were conducted to give an insight into the role of GO in the LIFT process. Pattern deposition was achieved with a minimum line width of 221 µm. The scattering can be tuned from ~2.5% to ~17.5% by changing the laser fluence. The patternable transparent display based on laser transferred nanosilica (LTNS) film was also demonstrated, showing its capability to deliver information on multiple levels. This LIFT based technique promotes fast, flexible, and low-cost manufacturing of scattering-based translucent screens or patterns for transparent displays.

Dynamics of Polar Skyrmion Bubbles under Electric Fields.

Room-temperature polar skyrmions, which have been recently discovered in oxide superlattice, have received considerable attention for their potential applications in nanoelectronics owing to their nanometer size, emergent chirality, and negative capacitance. For practical applications, their manipulation using external stimuli is a prerequisite. Herein, we study the dynamics of individual polar skyrmions at the nanoscale via in situ scanning transmission electron microscopy. By monitoring the electric-field-driven creation, annihilation, shrinkage, and expansion of topological structures in real space, we demonstrate the reversible transformation among skyrmion bubbles, elongated skyrmions, and monodomains. The underlying mechanism and interactions are discussed in conjunction with phase-field simulations. The electrical manipulation of nanoscale polar skyrmions allows the tuning of their dielectric permittivity at the atomic scale, and the detailed knowledge of their phase transition behaviors provides fundamentals for their applications in nanoelectronics.

Binary organic-inorganic nanocomposite of polyaniline-MnO2 for non-enzymatic electrochemical detection of environmental pollutant nitrite.

Due to wide usage as nitrogen fertilizer in agriculture and food additive in industry, nitrite, as one of inorganic environmental pollutants, could cause detrimental effects to the ecological environment. Therefore, accurate, sensitive and rapid detection of nitrite is necessary. In this work, binary hybrid polyaniline-MnO2 organic-inorganic nanocomposite is prepared chemically and characterized via X-ray diffraction spectroscopy, Fourier-transform infrared spectroscopy, scanning electron microscopy and energy-dispersive X-ray spectroscopy. Polyaniline-MnO2 organic-inorganic nanocomposite serves as excellent electrode modifier for electrochemical sensing of nitrite by two modes of cyclic voltammetry and chronoamperometry, achieving broad linear ranges and low limits of detection for both methods. Moreover, the organic-inorganic nanocomposite displays satisfactory sensing performance in real water sample analysis. Amine and imino groups of polyaniline contribute to the better adsorption behavior of nitrite onto the nanocomposite, which improves the nanocomposite's sensing performance. In summary, the synergistic effects between polyaniline and MnO2 is taken advantaged in the nanocomposite for effective electrochemical sensor development.

Thermal imprint of wide-angle viewing bi-stable cholesteric liquid crystal displays.

A thermal-imprint addressable and electrically erasable bi-stable cholesteric liquid crystal (CLC) display with a wide viewing angle is demonstrated. The proposed device with a multi-domain planar state is realized by filling a negative CLC in a vertical-alignment cell. The thermal-imprint method is introduced to restore the CLC from a reflective state (multi-domain planar state) to a translucent state (focal-conic state) to display images, and an electric field is used to erase the device back to totally reflective mode. This CLC display is bi-stable and does not require a complex driving circuit. Together with the features of a large viewing angle and less color shift, this device shows great potential for update-on-demand applications.

Engineering of atomic-scale flexoelectricity at grain boundaries.

Flexoelectricity is a type of ubiquitous and prominent electromechanical coupling, pertaining to the electrical polarization response to mechanical strain gradients that is not restricted by the symmetry of materials. However, large elastic deformation is usually difficult to achieve in most solids, and the strain gradient at minuscule is challenging to control. Here, we exploit the exotic structural inhomogeneity of grain boundary to achieve a huge strain gradient (~1.2 nm-1) within 3-4-unit cells, and thus obtain atomic-scale flexoelectric polarization of up to ~38 µC cm-2 at a 24° LaAlO3 grain boundary. Accompanied by the generation of the nanoscale flexoelectricity, the electronic structures of grain boundaries also become different. Hence, the flexoelectric effect at grain boundaries is essential to understand the electrical activities of oxide ceramics. We further demonstrate that for different materials, altering the misorientation angles of grain boundaries enables tunable strain gradients at the atomic scale. The engineering of grain boundaries thus provides a general and feasible pathway to achieve tunable flexoelectricity.

Highly Flexible Freestanding BaTiO3 -CoFe2 O4 Heteroepitaxial Nanostructure Self-Assembled with Room-Temperature Multiferroicity.

Multiferroics with simultaneous electric and magnetic orderings are highly desirable for sensing, actuation, data storage, and bio-inspired systems, yet developing flexible materials with robust multiferroic properties at room temperature is a long-term challenge. Utilizing water-soluble Sr3 Al2 O6 as a sacrificial layer, the authors have successfully self-assembled a freestanding BaTiO3 -CoFe2 O4 heteroepitaxial nanostructure via pulse laser deposition, and confirmed its epitaxial growth in both out-of-plane and in-plane directions, with highly ordered CoFe2 O4 nanopillars embedded in a single crystalline BaTiO3 matrix free of substrate constraint. The freestanding nanostructure enjoys super flexibility and mechanical integrity, not only capable of spontaneously curving into a roll, but can also be bent with a radius as small as 4.23 µm. Moreover, piezoelectricity and ferromagnetism are demonstrated at both microscopic and macroscopic scales, confirming its robust multiferroicity at room temperature. This work establishes an effective route for flexible multiferroic materials, which have the potential for various practical applications.

Rearranged Diels-Alder Adducts and Prenylated Flavonoids as Potential PTP1B Inhibitors from Morus nigra.

Two novel rearranged Diels-Alder adducts, morunigrines A (1) and B (2), and four new prenylated flavonoids, morunigrols A-D (3-6), were isolated from the twigs of Morus nigra, together with four known prenylated phenolic compounds, including two flavonoids (7 and 8) and two 2-arylbenzofurans (9 and 10). Morunigrines A (1) and B (2) are a novel class of Diels-Alder adducts with unprecedented carbon skeletons featuring a rearranged chalcone-stilbene/2-arylbenzofuran core decorated with a unique methylbiphenyl moiety. The structures of the new compounds were assigned by analysis of spectroscopic data. The absolute configuration of compound 6 was determined by the measurement of specific rotation. A plausible biogenetic pathway for 1 and 2 is also proposed. Compounds 1 and 2 exhibited more potent protein tyrosine phosphatase 1B inhibitory activity with IC50 values of 1.8 ± 0.2 and 1.3 ± 0.3 µM, respectively, than that of the positive control oleanolic acid (IC50, 2.5 ± 0.1 µM).

Superelastic oxide micropillars enabled by surface tension-modulated 90° domain switching with excellent fatigue resistance.

Superelastic materials capable of recovering large nonlinear strains are ideal for a variety of applications in morphing structures, reconfigurable systems, and robots. However, making oxide materials superelastic has been a long-standing challenge due to their intrinsic brittleness. Here, we fabricate ferroelectric BaTiO3 (BTO) micropillars that not only are superelastic but also possess excellent fatigue resistance, lasting over 1 million cycles without accumulating residual strains or noticeable variation in stress-strain curves. Phase field simulations reveal that the large recoverable strains of BTO micropillars arise from surface tension-modulated 90° domain switching and thus are size dependent, while the small energy barrier and ultralow energy dissipation are responsible for their unprecedented cyclic stability among superelastic materials. This work demonstrates a general strategy to realize superelastic and fatigue-resistant domain switching in ferroelectric oxides for many potential applications.

Creating polar antivortex in PbTiO3/SrTiO3 superlattice.

Nontrivial topological structures offer a rich playground in condensed matters and promise alternative device configurations for post-Moore electronics. While recently a number of polar topologies have been discovered in confined ferroelectric PbTiO3 within artificially engineered PbTiO3/SrTiO3 superlattices, little attention was paid to possible topological polar structures in SrTiO3. Here we successfully create previously unrealized polar antivortices within the SrTiO3 of PbTiO3/SrTiO3 superlattices, accomplished by carefully engineering their thicknesses guided by phase-field simulation. Field- and thermal-induced Kosterlitz-Thouless-like topological phase transitions have also been demonstrated, and it was discovered that the driving force for antivortex formation is electrostatic instead of elastic. This work completes an important missing link in polar topologies, expands the reaches of topological structures, and offers insight into searching and manipulating polar textures.

Qinzhuliangxue mixture alleviates psoriasis-like skin lesions via inhibiting the IL6/STAT3 axis.

ETHNOPHARMACOLOGICAL RELEVANCE: Psoriasis is a chronic inflammatory skin disease mediated by immunity. Our pre-clinical studies have proved that QZLX mixture can improve patients' clinical symptoms with psoriasis without noticeable adverse reactions. In a psoriasis-like mouse model induced by imiquimod, QZLX mixture has been shown to alleviate epidermal inflammation and inhibit the hyperproliferation of keratinocytes. However, its related molecular mechanism remains to be elucidated. AIM OF THE STUDY: To assess the mechanism of QZLX mixture against psoriasis. MATERIALS AND METHODS: This study combines network pharmacology and experiments to study the mechanism of QZLX against psoriasis. First, construct the active compound-target network and PPI network. Secondly, determine possible drug targets through Molecular docking and KEGG. Thirdly, high-performance liquid chromatography (HPLC) was used for the quality control of QZLX. Finally, use a mouse model of psoriasis to further confirm the role of QZLX. RESULTS: (1) Network pharmacology analysis shows that QZLX alleviates psoriasis's epidermal inflammation, and neovascularization may be achieved by inhibiting the IL6/STAT3 signaling pathway. (2) QZLX improves the pathological characteristics of IMQ-induced skin damage in psoriasis-like mice. (3) QZLX inhibits the IL6/STAT3 signaling pathway and reduces the expression of IL-17, IL-23, and TNF-α related to inflammation in peripheral blood, as well as the expression of S100A7 in the lesion area. QZLX is better than MTX in inhibiting neovascularization by down-regulating the expression of HIF-1 and CD31 in the lesion area. Finally, inhibition of Ki67 alleviates the excessive proliferation of keratinocytes. CONCLUSION: In sum, this study clarifies the mechanism of QZLX against psoriasis and provides evidence to support its clinical use.