Developing an integrated genomic selection approach beyond biomass for varietal protection and nutritive traits in perennial ryegrass (Lolium perenne L.).

KEY MESSAGE: Breeding target traits can be broadened to include nutritive value and plant breeder's rights traits in perennial ryegrass by using in-field regression-based spectroscopy phenotyping and genomic selection. Perennial ryegrass breeding has focused on biomass yield, but expansion into a broader set of traits is needed to benefit livestock industries whilst also providing support for intellectual property protection of cultivars. Numerous breeding objectives can be targeted simultaneously with the development of sensor-based phenomics and genomic selection (GS). Of particular interest are nutritive value (NV), which has been difficult and expensive to measure using traditional phenotyping methods, resulting in limited genetic improvement to date, and traits required to obtain varietal protection, known as plant breeder's rights (PBR) traits. In order to assess phenotyping requirements for NV improvement and potential for genetic improvement, in-field reflectance-based spectroscopy was assessed and GS evaluated in a single population for three key NV traits, captured across four timepoints. Using three prediction approaches, the possibility of targeting PBR traits using GS was evaluated for five traits recorded across three years of a breeding program. Prediction accuracy was generally low to moderate for NV traits and moderate to high for PBR traits, with heritability highly correlated with GS accuracy. NV did not show significant or consistent correlation between timepoints highlighting the need to incorporate seasonal NV into selection indexes and the value of being able to regularly monitor NV across seasons. This study has demonstrated the ability to implement GS for both NV and PBR traits in perennial ryegrass, facilitating the expansion of ryegrass breeding targets to agronomically relevant traits while ensuring necessary varietal protection is achieved.

Ostreopsis Schmidt and Coolia Meunier (Dinophyceae, Gonyaulacales) from Cook Islands and Niue (South Pacific Ocean), including description of Ostreopsis tairoto sp. nov.

It is important to decipher the diversity and distribution of benthic dinoflagellates, as there are many morphologically indistinct taxa that differ from one another in production of potent toxins. To date, the genus Ostreopsis comprises twelve described species, of which seven are potentially toxic and produce compounds presenting a threat to human and environmental health. In this study, isolates previously identified as "Ostreopsis sp. 3" were sampled from the area where it was first reported, Rarotonga, Cook Islands, and have been taxonomically and phylogenetically characterised as Ostreopsis tairoto sp. nov. Phylogenetically, the species is closely related to "Ostreopsis sp. 8", O. mascarenensis, "O. sp. 4", O. fattorussoi, O. rhodesiae and O. cf. siamensis. Previously, it was considered a part of the O. cf. ovata complex but can be distinguished from O. cf. ovata based on the small pores identified on this study, and from O. fattorussoi and O. rhodesiae based on relative lengths of the 2' plates. No known palytoxin -like compounds were detected in strains investigated in this study. Strains of O. lenticularis, Coolia malayensis and C. tropicalis were also identified and described. This study advances our knowledge of biogeography, distribution, and toxins of Ostreopsis and Coolia species.

Molecular breeding of transgenic white clover (Trifolium repens L.) with field resistance to Alfalfa mosaic virus through the expression of its coat protein gene.

Viral diseases, such as Alfalfa mosaic virus (AMV), cause significant reductions in the productivity and vegetative persistence of white clover plants in the field. Transgenic white clover plants ectopically expressing the viral coat protein gene encoded by the sub-genomic RNA4 of AMV were generated. Lines carrying a single copy of the transgene were analysed at the molecular, biochemical and phenotypic level under glasshouse and field conditions. Field resistance to AMV infection, as well as mitotic and meiotic stability of the transgene, were confirmed by phenotypic evaluation of the transgenic plants at two sites within Australia. The T(0) and T(1) generations of transgenic plants showed immunity to infection by AMV under glasshouse and field conditions, while the T(4) generation in an agronomically elite 'Grasslands Sustain' genetic background, showed a very high level of resistance to AMV in the field. An extensive biochemical study of the T(4) generation of transgenic plants, aiming to evaluate the level and composition of natural toxicants and key nutritional parameters, showed that the composition of the transgenic plants was within the range of variation seen in non-transgenic populations.

Genetic map construction and QTL mapping of resistance to blackleg (Leptosphaeria maculans) disease in Australian canola (Brassica napus L.) cultivars.

Genetic map construction and identification of quantitative trait loci (QTLs) for blackleg resistance were performed for four mapping populations derived from five different canola source cultivars. Three of the populations were generated from crosses between single genotypes from the blackleg-resistant cultivars Caiman, Camberra and (AV)Sapphire and the blackleg-susceptible cultivar Westar(10). The fourth population was derived from a cross between genotypes from two blackleg resistant varieties (Rainbow and (AV)Sapphire). Different types of DNA-based markers were designed and characterised from a collection of 20,000 EST sequences generated from multiple Brassica species, including a new set of 445 EST-SSR markers of high value to the international community. Multiple molecular genetic marker systems were used to construct linkage maps with locus numbers varying between 219 and 468, and coverage ranging from 1173 to 1800 cM. The proportion of polymorphic markers assigned to map locations varied from 70 to 89% across the four populations. Publicly available simple sequence repeat markers were used to assign linkage groups to reference nomenclature, and a sub-set of mapped markers were also screened on the Tapidor x Ningyou (T x N) reference population to assist this process. QTL analysis was performed based on percentage survival at low and high disease pressure sites. Multiple QTLs were identified across the four mapping populations, accounting for 13-33% of phenotypic variance (V (p)). QTL-linked marker data are suitable for implementation in breeding for disease resistance in Australian canola cultivars. However, the likelihood of shifts in pathogen race structure across different geographical locations may have implications for the long-term durability of such associations.

Discovery and genetic mapping of single nucleotide polymorphisms in candidate genes for pathogen defence response in perennial ryegrass (Lolium perenne L.).

Susceptibility to foliar pathogens commonly causes significant reductions in productivity of the important temperate forage perennial ryegrass. Breeding for durable disease resistance involves not only the deployment of major genes but also the additive effects of minor genes. An approach based on in vitro single nucleotide polymorphism (SNP) discovery in candidate defence response (DR) genes has been used to develop potential diagnostic genetic markers. SNPs were predicted, validated and mapped for representatives of the pathogenesis-related (PR) protein-encoding and reactive oxygen species (ROS)-generating gene classes. The F(1)(NA(6) x AU(6)) two-way pseudo-test cross population was used for SNP genetic mapping and detection of quantitative trait loci (QTLs) in response to a crown rust field infection. Novel resistance QTLs were coincident with mapped DR gene SNPs. QTLs on LG3 and LG7 also coincided with both herbage quality QTLs and candidate genes for lignin biosynthesis. Multiple DR gene SNP loci additionally co-located with QTLs for grey leaf spot, bacterial wilt and crown rust resistance from other published studies. Further functional validation of DR gene SNP loci using methods such as fine-mapping and association genetics will improve the efficiency of parental selection based on superior allele content.

Validation of in silico-predicted genic SNPs in white clover (Trifolium repens L.), an outbreeding allopolyploid species.

White clover (Trifolium repens L.) is an obligate outbreeding allotetraploid forage legume. Gene-associated SNPs provide the optimum genetic system for improvement of such crop species. An EST resource obtained from multiple cDNA libraries constructed from numerous genotypes of a single cultivar has been used for in silico SNP discovery and validation. A total of 58 from 236 selected sequence clusters (24.5%) were fully validated as containing polymorphic SNPs by genotypic analysis across the parents and progeny of several two-way pseudo-testcross mapping families. The clusters include genes belonging to a broad range of predicted functional categories. Polymorphic SNP-containing ESTs have also been used for comparative genomic analysis by comparison with whole genome data from model legume species, as well as Arabidopsis thaliana. A total of 29 (50%) of the 58 clusters detected putative ortholoci with known chromosomal locations in Medicago truncatula, which is closely related to white clover within the Trifolieae tribe of the Fabaceae. This analysis provides access to translational data from model species. The efficiency of in silico SNP discovery in white clover is limited by paralogous and homoeologous gene duplication effects, which are resolved unambiguously by the transmission test. This approach will also be applicable to other agronomically important cross-pollinating allopolyploid plant species.

Improved experimental limit on the electric dipole moment of the neutron.

An experimental search for an electric dipole moment (EDM) of the neutron has been carried out at the Institut Laue-Langevin, Grenoble. Spurious signals from magnetic-field fluctuations were reduced to insignificance by the use of a cohabiting atomic-mercury magnetometer. Systematic uncertainties, including geometric-phase-induced false EDMs, have been carefully studied. The results may be interpreted as an upper limit on the neutron EDM of |d(n)|< 2.9 x 10(-26)e cm (90% C.L.).

Individual and multi-environment combined analyses identify QTLs for morphogenetic and reproductive development traits in white clover (Trifolium repens L.).

White clover (Trifolium repens L.) is a key component legume of temperate pasture agriculture and an important target for molecular marker-assisted plant breeding. A genetic map of white clover has been used to assess genetic control of agronomically important traits that vary in the F2(I.4RxI.5J) mapping family. Phenotypic analysis was performed for a range of vegetative morphogenesis traits (such as leaf area, internode length, plant height and plant spread) and reproductive morphogenesis and development traits (such as flowering date, floral intensity and seed yield), with both spatial and temporal replication. A multi-environment combined analysis (combined analysis) has been performed for traits assessed across multiple experimental datasets in order to identify consistent genetic effects. Quantitative trait locus (QTLs) were detected for the majority of traits, and the locations and magnitudes of QTL effects were compared between individual and combined analyses. This molecular genetic dissection of agronomic traits in white clover provides the basis for equivalent studies in more complex populations, design of marker-assisted selection strategies and comparative genetics with model legume species. Selection for QTLs derived from the combined analysis will permit robust improvement of phenotypic traits over different environments.

QTL analysis and comparative genomics of herbage quality traits in perennial ryegrass (Lolium perenne L.).

Genetic control of herbage quality variation was assessed through the use of the molecular marker-based reference genetic map of perennial ryegrass (Lolium perenne L.). The restriction fragment length polymorphism (RFLP), amplified fragment length polymorphism (AFLP) and genomic DNA-derived simple sequence repeat-based (SSR) framework marker set was enhanced, with RFLP loci corresponding to genes for key enzymes involved in lignin biosynthesis and fructan metabolism. Quality traits such as crude protein (CP) content, estimated in vivo dry matter digestibility (IVVDMD), neutral detergent fibre content (NDF), estimated metabolisable energy (EstME) and water soluble carbohydrate (WSC) content were measured by near infrared reflectance spectroscopy (NIRS) analysis of herbage harvests. Quantitative trait locus (QTL) analysis was performed using single-marker regression, simple interval mapping and composite interval mapping approaches, detecting a total of 42 QTLs from six different sampling experiments varying by developmental stage (anthesis or vegetative growth), location or year. Coincident QTLs were detected on linkage groups (LGs) 3, 5 and 7. The region on LG3 was associated with variation for all measured traits across various experimental datasets. The region on LG7 was associated with variation for all traits except CP, and is located in the vicinity of the lignin biosynthesis gene loci xlpomt1 (caffeic acid-O-methyltransferase), xlpccr1 (cinnamoyl CoA-reductase) and xlpssrcad 2.1 (cinnamyl alcohol dehydrogenase). Comparative genomics analysis of these gene classes with wheat (Triticum aestivum L.) provides evidence for conservation of gene order over evolutionary time and the basis for cross-specific genetic information transfer. The identification of co-location between QTLs and functionally associated genetic markers is critical for the implementation of marker-assisted selection programs and for linkage disequilibrium studies, which will enable future improvement strategies for perennial ryegrass.

Functionally associated molecular genetic marker map construction in perennial ryegrass (Lolium perenne L.).

A molecular marker-based map of perennial ryegrass (Lolium perenne L.) has been constructed through the use of polymorphisms associated with expressed sequence tags (ESTs). A pair-cross between genotypes from a North African ecotype and the cultivar Aurora was used to generate a two-way pseudo-testcross population. A selection of 157 cDNAs assigned to eight different functional categories associated with agronomically important biological processes was used to detect polymorphic EST-RFLP loci in the F(1)(NA(6) x AU(6)) population. A comprehensive set of EST-SSR markers was developed from the analysis of 14,767 unigenes, with 310 primer pairs showing efficient amplification and detecting 113 polymorphic loci. Two parental genetic maps were produced: the NA(6) genetic map contains 88 EST-RFLP and 71 EST-SSR loci with a total map length of 963 cM, while the AU(6) genetic map contains 67 EST-RFLP and 58 EST-SSR loci with a total map length of 757 cM. Bridging loci permitted the alignment of homologous chromosomes between the parental maps, and a sub-set of genomic DNA-derived SSRs was used to relate linkage groups to the perennial ryegrass reference map. Regions of segregation distortion were identified, in some instances in common with other perennial ryegrass maps. The EST-derived marker-based map provides the basis for in silico comparative genetic mapping, as well as the evaluation of co-location between QTLs and functionally associated genetic loci.

A patient with three kidneys: a correlative imaging case report.

A man with three fully developed and well functioning kidneys was studied using correlative imaging. Renal scintigraphy and the renogram not only played a role in identifying the existence of three kidneys but also determined the level of function of each kidney. The use of renal scintigraphy and renography is pivotal in the diagnosis of supernumerary kidneys. An abbreviated review of embryogenesis is also given.

The evolutional stage changes in sarcoidosis on gallium-67 scintigraphy.

UNLABELLED: Gallium-67 scintigraphy has been proven as the imaging modality of choice in monitoring the presence of active disease in sarcoidosis. The purpose of this study is to analyze the patterns of evolutional stage changes of sarcoidosis while on steroid therapy by Ga-67 scintigraphy. METHODS: Eighty-six consecutive patients with biopsy-proved sarcoidosis are evaluated by Ga-67 scintigraphy. Thirty-six of 86 patients have had a baseline and one to eight follow-up Ga-67 scintigraphs (total 136 studies). The initial follow-up scintigraphs are obtained on average about 4-12 months after the baseline study. RESULTS: Seventeen of 36 patients (47.2%) are in stage IV at the time of the baseline study. Following their first course of corticosteroid therapy, 13 patients remained in the same stage and activity distribution pattern while 13 patients have shown reversion to other stages, eight patients showed complete remission while two patients became active from inactive stage. CONCLUSION: Evolutional stage changes are seen in 23 patients (63.9%), including eight patients (22.2%) who showed complete scintigraphic remission. The evolutionary stage changes remain quite variable and unpredictable. This, however, should not detract from the usefulness of Ga-67 scintigraphy in the diagnosis and prognostic evaluation of sarcoidosis, particularly when extrapulmonary involvement (Stage IV disease) is present.

Reproducibility of a questionnaire for assessment of present and past physical activities.

OBJECTIVE: The aim of this study was to evaluate the reproducibility of a self-administered questionnaire about present and past physical activities at work and during leisure time. METHODS AND DESIGN: The questionnaire, covering the period 1970-1993, comprised 12 questions on physical activities at work, and 12, with similar wording, for such activities in leisure time. There were also four questions on physical training. Two-week reproducibility (test-retest reliability) concerning the period 1970-1993 was analysed in a group of 44 subjects, and 1-year reproducibility, concerning current activities in 1993, was analysed in a second group of 123 subjects in relation to gender, age and low-back health. RESULTS: Test-retest reliability calculated as intraclass correlation coefficients (ri) for physical activities at work (ri 0.41-0.98) exceeded that for leisure time and physical training activities (ri 0.33-0.68). Calculated correlations did not differ markedly between past and present activities. No distinct influence of gender or low back health on 1-year reproducibility was found, in contrast to a slight tendency towards higher reproducibility among subjects of 50 years and older compared with younger subjects. CONCLUSIONS: Reproducibility of this questionnaire about physical activities at work showed no clear tendency to deteriorate regarding activities during the immediately preceding two decades. The questions about physical activities during leisure time have to be revised. Reliable retrospective information about physical activities in leisure time could perhaps not be collected by self-administered questionnaires and other methods, e.g. interview-based questionnaires, may be more suitable.

A new DNA sequence assembly program.

We describe the Genome Assembly Program (GAP), a new program for DNA sequence assembly. The program is suitable for large and small projects, a variety of strategies and can handle data from a range of sequencing instruments. It retains the useful components of our previous work, but includes many novel ideas and methods. Many of these methods have been made possible by the program's completely new, and highly interactive, graphical user interface. The program provides many visual clues to the current state of a sequencing project and allows users to interact in intuitive and graphical ways with their data. The program has tools to display and manipulate the various types of data that help to solve and check difficult assemblies, particularly those in repetitive genomes. We have introduced the following new displays: the Contig Selector, the Contig Comparator, the Template Display, the Restriction Enzyme Map and the Stop Codon Map. We have also made it possible to have any number of Contig Editors and Contig Joining Editors running simultaneously even on the same contig. The program also includes a new 'Directed Assembly' algorithm and routines for automatically detecting unfinished segments of sequence, to which it suggests experimental solutions.

Beta-sheet secondary structure of an LDL receptor domain from complement factor I by consensus structure predictions and spectroscopy.

Low density lipoprotein receptor domains (LDLrs) represent a large cell surface receptor superfamily of consensus length 39 residues. Alignment of 194 sequences indicated highly conserved Cys and Asp/Glu residues, and a consensus secondary structure with three beta-strands was predicted. Sequence threading against known protein folds indicated consistency with small beta-sheet proteins. Complement factor I contains two LDLrs, and the second of these was successfully expressed using a bacterial pGEX system. FT-IR spectroscopy on this indicated a small amount of beta-sheet together with turns and loops. LDLr is proposed to have a beta-sheet structure in which the five biologically important Asp/Glu residues are located on an exposed loop.

Beta-sheet secondary structure of the trimeric globular domain of C1q of complement and collagen types VIII and X by Fourier-transform infrared spectroscopy and averaged structure predictions.

C1q plays a key role in the recognition of immune complexes, thereby initiating the classical pathway of complement activation. Although the triple-helix conformation of its N-terminal segment is well established, the secondary structure of the trimeric globular C-terminal domain is as yet unknown. The secondary structures of human C1q and C1q stalks and pepsin-extracted human collagen types I, III and IV (with no significant non-collagen-like structure) were studied by Fourier-transform i.r. spectroscopy in 2H2O buffers. After second-derivative calculation to resolve the fine structure of the broad amide I band, the Fourier-transform i.r. spectrum of C1q showed two major bands, one at 1637 cm-1, which is a characteristic frequency for beta-sheets, and one at 1661 cm-1. Both major bands were also detected for Clq in H2O buffers. Only the second major band was observed at 1655 cm-1 in pepsin-digested C1q which contains primarily the N-terminal triple-helix region. The Fourier-transform i.r. spectra of collagen in 2H2O also showed a major band at 1659 cm-1 (and minor bands at 1632 cm-1 and 1682 cm-1). It is concluded that the C1q globular heads contain primarily beta-sheet structure. The C-terminal domains of C1q show approximately 25% sequence identity with the non-collagen-like C-terminal regions of the short-chain collagen types VIII and X. To complement the Fourier-transform-i.r. spectroscopic data, averaged Robson and Chou-Fasman structure predictions on 15 similar sequences for the globular domains of C1q and collagen types VIII and X were performed. These showed a clear pattern of ten beta-strands interspersed by beta-turns and /or loops. Residues thought to be important for C1q-immune complex interactions with IgG and IgM were predicted to be at a surface-exposed loop. Sequence insertions and deletions, glycosylation sites, the free cysteine residue and RGD recognition sequences were also predicted to be at surface-exposed positions.

The secondary structure of the von Willebrand factor type A domain in factor B of human complement by Fourier transform infrared spectroscopy. Its occurrence in collagen types VI, VII, XII and XIV, the integrins and other proteins by averaged structure predictions.

The type A domain of the von Willebrand Factor is found also in the complement proteins factor B (FB), C2, CR3 and CR4, the integrins, collagen types VI, VII, XII and XIV, and other proteins. FB is a component of the alternative pathway of the complement system of immune defence, and is cleaved into the fragments Bb and Ba during complement activation. Bb contains a von Willebrand Factor type A (vWF) domain of unknown secondary structure and a serine proteinase (SP) domain, whereas Ba contains three short consensus repeat/complement control protein (SCR/CCP) domains. Fourier transform infrared (FT-IR) spectroscopy on a recombinant vWF domain and on FB and its Bb and Ba fragments shows a broad amide I band. In H2O buffer, second derivative spectra of the amide I band show subcomponents at 1654 to 1657 cm-1, which is typical of alpha-helix, and at 1676 to 1685 cm-1 and 1636 to 1637 cm-1, which are typical of beta-strand. alpha-Helix was detected in the vWF domain, the Bb fragment and FB, and the proportion of alpha-helix present decreased in that order. This shows that the vWF domain contains appreciable amounts of alpha-helix, while the SP and SCR/CCP domains are almost entirely beta-sheet in their secondary structures. Quantitative integration of the vWF FT-IR spectrum showed that this contained 31% alpha-helix and 36% beta-sheet. In 2H2O buffer, the alpha-helix content in the vWF domain is sensitive to the solvent, while the beta-sheet content is less so. An alignment of 75 vWF type A sequences from 25 proteins was used for averaged secondary structure predictions of the total length of 206 residues by the Robson and Chou-Fasman methods. In support of the FT-IR analysis, a total of at least five well-predicted alpha-helices (35% of residues) and at least five well-predicted beta-strands (21% of residues) were identified by both predictive methods, all of which were interspersed by regions of coil or turn conformations. Eight of the ten predicted alpha-helices and beta-strands form an alternating arrangement with each other. Since the predicted alpha-helices are mostly amphipathic, and since the alpha-helix FT-IR band is sensitive to solvent, the alpha-helices are inferred to be on the protein surface.(ABSTRACT TRUNCATED AT 400 WORDS)

Molecular modelling of the domain structure of factor I of human complement by X-ray and neutron solution scattering.

Factor I is a typical multidomain protein of the complement system. It regulates complement activation by proteolytic degradation of C3b or C4b in the presence of factor H, complement receptor type 1, membrane cofactor protein or C4b-binding protein as cofactor. It is constructed from five presumed independently folded domains, namely a factor I module, a CD5-like domain, two low-density-lipoprotein receptor type A domains and a serine-proteinase domain. X-ray and neutron solution scattering was used to study the arrangement of these domains in factor I. Factor I was determined to be monomeric in solution, with an A280(1%,1cm) of 12.3-14.1. Its radius of gyration (RG) was 3.96 nm by X-rays in a high positive solute-solvent contrast, and 3.84 nm by neutrons at infinite solute-solvent contrast. The cross-sectional radius of gyration (RXS) was likewise found to be 1.64 nm by X-rays and 1.55 nm by neutrons. The RG data were not noticeably dependent on the solute-solvent contrast, whereas the RXS data showed a small dependence. The maximum dimension of factor I was determined to be 12.8 nm from the RG and RXS data, and 14-15 nm from the X-ray and neutron distance distribution functions. This length is too short to account for a linear arrangement of the domains in factor I. Small sphere models were developed for factor I in which the largest domain was modelled from the crystal structure for beta-trypsin. The attachment of either an elliptical cylinder or a two-armed V-shaped structure to this domain to represent the remaining four small domains gave good scattering curve-fits for factor I, and were compatible with experimental sedimentation coefficients. The non-extended domain models for factor I imply that the steric accessibility of each domain will be reduced, and this may be important for its functional activity.

Identity of the putative serine-proteinase fold in proteins of the complement system with nine relevant crystal structures.

The serine-proteinase domain is responsible for the proteolytic events that occur during complement activation. The sequences of nine serine proteinases of known crystal structure were compared with the serine-proteinase sequences in the six complement proteins C1r, C1s, C2, factor B, factor I and factor D to assess the degree of structural homology of the latter with the crystal structures. All sequence insertions and deletions were readily located at the protein surface. The internal location of disulphide bridges and the surface location of putative glycosylation sites are compatible with this structure. Secondary-structure predictions for the sequences were fully consistent with the crystal structures. It is concluded that the double subdomain beta-sheet motif is retained in the complement sequences, but that localized differences are observed for factor I, C2 and factor B.

Modelling of the serine-proteinase fold by X-ray and neutron scattering and sedimentation analyses: occurrence of the fold in factor D of the complement system.

Solution scattering is a powerful means of determining the overall arrangement of domains in the multidomain proteins of complement. the serine-proteinase domain is central to all proteolytic events during complement activation. As models of this domain, bovine beta-trypsin, trypsinogen, alpha-chymotrypsin and chymotrypsinogen A were studied by neutron and X-ray synchrotron solution scattering. At pH 7, all the X-ray and neutron M(r) values corresponded to monomeric proteins. The X-ray radii of gyration, RG, of beta-trypsin, trypsinogen, alpha-chymotrypsin and chymotrypsinogen A (measured in positive solute-solvent contrasts) were 1.59 nm, 1.78 nm, 1.71 nm and 1.76 nm (+/- 0.05-0.11 nm) in that order. Neutron contrast variation showed that the RG at infinite contrast, RC, for these four proteins were 1.57 nm, 1.70 nm, 1.67 nm and 1.78 nm (+/- 0.03 nm) in that same order. The radial inhomogeneity of neutron-scattering density, alpha, was positive at (5-13) x 10(-5), and corresponds to the preponderance of hydrophilic residues near the protein surface. On trypsinogen activation, a small reduction in the RG value of 0.13 +/- 0.07 nm was just detectable, while the RG of chymotrypsinogen A was unchanged after activation. The RC and alpha values of the four proteins can be calculated by using crystallographic co-ordinates. The reduced RG of beta-trypsin relative to trypsinogen was explained in terms of the removal of the extended N-terminal hexapeptide of trypsinogen. The full X-ray and neutron-scattering curves in positive and negative contrasts agreed well with scattering curves calculated from crystallographic coordinates to a nominal structural resolution of 4.5 nm, provided that the internal structure was considered in neutron modelling, and that the hydration was considered in X-ray modelling. Sedimentation-coefficient data also provide information on the disposition of domains in multidomain proteins. It was found that the hydrated X-ray sphere model could be directly utilized to calculate sedimentation coefficients. X-ray scattering on factor D showed from its RG of 1.78 nm that this is monomeric and very similar in structure to beta-trypsin. The X-ray-scattering curve of factor D was readily modelled using the beta-trypsin crystal structure after allowance for sequence changes. The success of these modellings provides a basis for the constrained modelling of solution scattering data for the multidomain proteins of complement.