Comparison of various dissolution techniques for determination of Po-210 in biological samples.

The aim of the present study was to compare three wet digestion procedures for dissolution of biological samples in the determination of Po-210. Classical wet ashing over a gas flame with acids in a long-necked Kjeldahl flask, digestion with acids in an Erlenmeyer flask and microwave digestion in a Teflon vessel at temperatures at up to 200°C were investigated. The results obtained showed that the activity concentrations of Po-210 found in the samples analysed were comparable for all the procedures used.

Assessing doses to terrestrial wildlife at a radioactive waste disposal site: inter-comparison of modelling approaches.

Radiological doses to terrestrial wildlife were examined in this model inter-comparison study that emphasised factors causing variability in dose estimation. The study participants used varying modelling approaches and information sources to estimate dose rates and tissue concentrations for a range of biota types exposed to soil contamination at a shallow radionuclide waste burial site in Australia. Results indicated that the dominant factor causing variation in dose rate estimates (up to three orders of magnitude on mean total dose rates) was the soil-to-organism transfer of radionuclides that included variation in transfer parameter values as well as transfer calculation methods. Additional variation was associated with other modelling factors including: how participants conceptualised and modelled the exposure configurations (two orders of magnitude); which progeny to include with the parent radionuclide (typically less than one order of magnitude); and dose calculation parameters, including radiation weighting factors and dose conversion coefficients (typically less than one order of magnitude). Probabilistic approaches to model parameterisation were used to encompass and describe variable model parameters and outcomes. The study confirms the need for continued evaluation of the underlying mechanisms governing soil-to-organism transfer of radionuclides to improve estimation of dose rates to terrestrial wildlife. The exposure pathways and configurations available in most current codes are limited when considering instances where organisms access subsurface contamination through rooting, burrowing, or using different localised waste areas as part of their habitual routines.

Installation and calibration of Kayzero-assisted NAA in three Central European countries via a Copernicus project.

An account is given of the installation and calibration of k0-based NAA--assisted by the DSM Kayzero/Solcoi software package--at the KFKI-AEKI, Budapest, the NPI, Rez and the IJS, Ljubljana. Not only the calibration of the Ge-detectors and the irradiation facilities are discussed, but also other important topics such as gamma-spectrometric hard- and software, QC/QA of the IRMM-530 Al-Au flux monitor and the upgrade of the Kayzero/Solcoi code. The work was performed in the framework of a European Copernicus JRP, coordinated by the Laboratory of Analytical Chemistry, Gent, with DSM Research, Geleen, as the industrial partner.

Preparation and characterization of a set of IAEA reference air filters for quality control in air-pollution studies.

Several sets of reference air filters were prepared as part of an IAEA evaluation of the performance of laboratories involved in air-pollution studies. Each set comprised three polycarbonate membrane filters, two of which were loaded with urban air particulate matter (APM) obtained in Vienna or Prague, and one unloaded filter. The filters were loaded by filtration of a suspension of the APM materials in water. The homogeneity both of bulk APM materials and of the loaded filters was evaluated and found suitable by determining several elements by instrumental neutron-activation analysis (INAA), proton-induced X-ray emission (PIXE), and micro-X-ray energy-dispersive fluorescence analysis (micro-EDXRF). After evaluation of the homogeneity, INAA, PIXE, EDXRF, atomic absorption spectrometry (AAS), inductively coupled plasma optical emission spectrometry (ICP-OES), and ICP mass spectrometry (ICP-MS) were used to characterize the filter materials and establish "target values" and their associated standard deviations for 15 elements. Problems encountered during the preparation of these unique, simulated air filters and the criteria for setting both the target values and standard deviations are presented.

The validation of Kayzero-assisted NAA in Budapest, Rez, and Ljubljana via the analysis of three BCR certified reference materials.

After installation and calibration of k0-assisted NAA in three Central European research institutes (AEKI-Budapest, NPI-Rez, and IJS, Ljubljana), its validation was established via the analysis of three BCR certified reference materials. The matrices of choice were: CRM 277 estuarine sediment, CRM 038 coal fly ash from pulverized coal, and CRM 101 spruce needles. For some elements, e.g. Zn, Cd, and Hg, the analyses were not only performed instrumentally (INAA), but also in the radiochemical mode (RNAA). The work was performed in the framework of a European Copernicus Project.

IAEA Internet database of natural matrix reference materials.

The International Atomic Energy Agency maintains a database on internationally available certified reference materials of natural origin. The database was updated in 1998 and prepared for an Internet implementation. A user-friendly structure was created, providing two main pathways for browsing, either according to the matrix classification or the producer's name. The database presently contains over 20,000 values for 480 measurands and 1085 reference materials from 43 different producers. Most of the materials entered contain values for trace and minor elements (66%).

Health-related monitoring and assessment of airborne particulate matter. An overview of recent IAEA programs.

Since 1992, the International Atomic Energy Agency (IAEA) has been promoting studies of air pollution using a standard design of air sampler that provides separation on filters into two size fractions with cutoffs of 2.5 and 10 microns (approximately). These are the size ranges presently considered to have the most important health consequences. Such filter samples are highly amenable to analysis using nuclear and related techniques. After reviewing some of the health effects of airborne particulate matter and current air quality standards and guidelines, this article provides an overview of current and recent IAEA programs in this area, which involve collaborative activities with participants in more than 40 countries.

Biomonitoring of air pollution as exemplified by recent IAEA programs.

Biomonitoring is an appropriate tool for assessing the levels of atmospheric pollution, having several advantages compared with the use of direct measurements of contaminants (e.g., in airborne particulate matter, atmospheric deposition, precipitation), related primarily to the permanent and common occurrence of the chosen organisms in the field, the ease of sampling, and trace element accumulation. Furthermore, biomonitors may provide a measure of integrated exposure over an extended period of time and are present in remote areas and no expensive technical equipment is involved in collecting them. They accumulate contaminants over the exposure time and concentrate them, thus facilitating analytical measurements. Based on large-scale biomonitoring surveys, polluted areas can be identified, and by applying appropriate statistical tools, information can be obtained on the type of pollution sources and on the transboundary transport of atmospheric pollutants. The International Atomic Energy Agency is including the research on biomonitors in its projects on health-related environmental studies. Biomonitoring activities from several coordinated research projects on air pollution are presented, and results from an international workshop are discussed. In addition, activities in supporting improvement quality in the participating laboratories are outlined.

Adhesion of water-borne particulates on freshwater biota.

The retention of suspended particles transported by river flow on surfaces of freshwater plants is a potentially important process in the contamination of aquatic biota. Field experiments have been performed to test the role of benthic algae (periphyton) in trapping inorganic suspended solids transported by the river water and to discriminate between the caesium content of periphyton caused by the adherence of inorganic solids and by the active uptake inside the organisms. The contribution of caesium of suspended solids adhering to biotic surfaces was estimated by determining the scandium content (scandium method). The scandium method was used because this element is geologically ubiquitous in soils and it is not taken up actively by plants and other organisms. The mass of suspended particles retained on the surfaces of microorganisms growing on submerged substrates were determined by comparing the scandium content of suspended material with that in algal communities. Neutron activation analysis was used as the analytical method for determination for both scandium, and caesium. The results indicate that the suspended particle fraction can contribute up to 80% of the caesium contamination of periphyton samples. Active caesium uptake and accumulation by aquatic biota represents the remaining 20% of the total caesium contamination.

Preliminary studies on arsenic species in some environmental samples.

Arsenic compounds have been determined in some environmental samples from the German Environmental Specimen Bank (ESB) (marine mussels, freshwater mussel and fish, sea-gull eggs) and certified reference materials (DORM-1, DOLT-1, NBS Oyster Tissue) after separation by open column cation and anion exchange chromatography by two different methods of total arsenic determination in separated fractions (instrumental neutron activation analysis or hydride generation atomic absorption spectrometry). Arsenobetaine has been identified as the major species in all the different materials.

Atmospheric heavy metal pollution in Slovenia derived from results for epiphytic lichens.

In 1992, a monitoring survey has been started on the national scale in Slovenia using the epiphytic lichen Hypogymnia physodes (L.) Nyl. The primary aim has been to analyse lichens using the k(0)-based INAA method to obtain information about the levels of elements in the atmosphere and to identify significant pollution sources. Monte Carlo-Assisted Factor Analysis was applied to a data set of the 28 elements As, Ag, Ba, Br, Ce, Cd, Co, Cr, Cs, Fe, Ga, Hf, Hg, K, La, Mo, Na, Rb, Sb, Sc, Se, Sr, Sm, Tb, Th, U, W and Zn, which have been selected from the elements determined as the most important ones for the identification of pollution sources. A Monte Carlo approach has been used to give more insight into the uncertainties and significance levels of the factor analysis results. It has been found that concentration patterns in lichens yielded 9 factors (source types) which are presented and discussed in detail. The geographical patterns of the contributions of all factors are also shown.

Determination of trace elements in standard reference materials by the ko-standardization method.

The ko-standardization method is suitable for routine multielement determinations by reactor neutron activation analysis (NAA). Investigation of NIST standard reference materials SRM 1571 Orchard Leaves, SRM 1572 Citrus Leaves, and SRM 1573 Tomato Leaves showed the systematic error of 12 certified elements determined to be less than 8%. Thirty-four elements were determined in NIST proposed SRM 1515 Apple Leaves.

Atmospheric 222Rn in tourist caves of Slovenia, Yugoslavia.

Radon-222 concentrations in the air of 12 tourist caves in Slovenia, Yugoslavia were measured. In almost all the caves concentrations are higher than in the outdoor air, with the highest concentration in the Tabor Cave at about 6000 Bq m-3. From the 222Rn concentrations obtained, the activity of 222Rn inhaled by a visitor breathing cave air was calculated, and the bronchial dose was estimated. The inhaled activity and the bronchial dose were highest in the Tabor Cave with values of 10 kBq and 540 microSv, respectively.