Electron Transport Layer Engineering Induced Carrier Dynamics Optimization for Efficient Cd-Free Sb2 Se3 Thin-Film Solar Cells.

Antimony selenide (Sb2 Se3 ) is a highly promising photovoltaic material thanks to its outstanding optoelectronic properties, as well as its cost-effective and eco-friendly merits. However, toxic CdS is widely used as an electron transport layer (ETL) in efficient Sb2 Se3 solar cells, which largely limit their development toward market commercialization. Herein, an effective green Cd-free ETL of SnOx is introduced and deposited by atomic layer deposition method. Additionally, an important post-annealing treatment is designed to further optimize the functional layers and the heterojunction interface properties. Such engineering strategy can optimize SnOx ETL with higher nano-crystallinity, higher carrier density, and less defect groups, modify Sb2 Se3 /SnOx heterojunction with better interface performance and much desirable "spike-like" band alignment, and also improve the Sb2 Se3 light absorber layer quality with passivated bulk defects and prolonged carrier lifetime, and therefore to enhance carrier separation and transport while suppressing non-radiative recombination. Finally, the as-fabricated Cd-free Mo/Sb2 Se3 /SnOx /ITO/Ag thin-film solar cell exhibits a stimulating efficiency of 7.39%, contributing a record value for Cd-free substrate structured Sb2 Se3 solar cells reported to date. This work provides a viable strategy for developing and broadening practical applications of environmental-friendly Sb2 Se3 photovoltaic devices.

Crystal Growth Promotion and Defect Passivation by Hydrothermal and Selenized Deposition for Substrate-Structured Antimony Selenosulfide Solar Cells.

Antimony sulfide-selenide (Sb2(S,Se)3) is a promising light-harvesting material for stable and high-efficiency thin-film photovoltaics (PV) because of its excellent light-harvesting capability, abundant elemental storage, and excellent stability. This study aimed to expand the application of Sb2(S,Se)3 solar cells with a substrate structure as a flexible or tandem device. The use of a hydrothermal method accompanied by a postselenization process for the deposition of Sb2(S,Se)3 film based on the solar cell substrate structure was first demonstrated. The mechanism of postselenization treatment on crystal growth promotion of the Sb2(S,Se)3 film and the defect passivation of the Sb2(S,Se)3 solar cell were revealed through different characterization methods. The crystallinity and the carrier transport property of the Sb2(S,Se)3 film improved, and both the interface defect density of the Sb2(S,Se)3/CdS interface and the bulk defect density of the Sb2(S,Se)3 absorber decreased. Through these above-mentioned processes, the transport and collection of electronics can be improved, and the defect recombination loss can be reduced. By using postselenization treatment to optimize the absorber layer, Sb2(S,Se)3 solar cells with the configuration SLG/Mo/Sb2(S,Se)3/CdS/ITO/Ag achieved an efficiency of 4.05%. This work can provide valuable information for the further development and improvement of Sb2(S,Se)3 solar cells.

Heterojunction Annealing Enabling Record Open-Circuit Voltage in Antimony Triselenide Solar Cells.

Despite the fact that antimony triselenide (Sb2 Se3 ) thin-film solar cells have undergone rapid development in recent years, the large open-circuit voltage (VOC ) deficit still remains as the biggest bottleneck, as even the world-record device suffers from a large VOC deficit of 0.59 V. Here, an effective interface engineering approach is reported where the Sb2 Se3 /CdS heterojunction (HTJ) is subjected to a post-annealing treatment using a rapid thermal process. It is found that nonradiative recombination near the Sb2 Se3 /CdS HTJ, including interface recombination and space charge region recombination, is greatly suppressed after the HTJ annealing treatment. Ultimately, a substrate Sb2 Se3 /CdS thin-film solar cell with a competitive power conversion efficiency of 8.64% and a record VOC of 0.52 V is successfully fabricated. The device exhibits a much mitigated VOC deficit of 0.49 V, which is lower than that of any other reported efficient antimony chalcogenide solar cell.

Organic Chloride Salt Interfacial Modified Crystallization for Efficient Antimony Selenosulfide Solar Cells.

Antimony selenosulfide, Sb2(SSe)3, is recognized as an excellent photoactive material owing to its light harvesting capability. There is still room for improvement of the film quality for device performance improvement. Herein, an organic chloride salt [diethylamine hydrochloride, DEA(Cl)] has been introduced for fabricating Sb2(SSe)3 solar cells for the first time. A champion device with a power conversion efficiency (PCE) of 9.17% has been achieved with a relatively improved fill factor and open-circuit voltage (VOC). It has been revealed that DEA(Cl) successfully interacts with Sb2(SSe)3, which can facilitate the crystallization process to give rise to the closely packed bigger grain sizes with reduced surface cracks; it successfully suppressed the oxidized Sb species (Sb2O3) in the Sb2(SSe)3 film to give rise to phase purity, thus leading to superior surface morphology and electrical characteristics of DEA(Cl)-modified Sb2(SSe)3 absorber films. Chloride modification is thus efficiently helpful in suppressing interfacial defects, improving junction quality, and optimizing energy-level alignment. This facile interfacial modification demonstrates the remarkable potential for efficient Sb2(SSe)3 solar cells.

Quasi-Vertically Oriented Sb2Se3 Thin-Film Solar Cells with Open-Circuit Voltage Exceeding 500 mV Prepared via Close-Space Sublimation and Selenization.

Sb2Se3, one of the most desirable absorption materials for next-generation thin-film solar cells, has an excellent photovoltaic characteristic. The [hk1]-oriented (quasi-vertically oriented) Sb2Se3 thin film is more beneficial for promoting efficient carrier transport than the [hk0]-oriented Sb2Se3 thin film. Controlling thin-film orientation remains the main obstacle to the further improvement in the efficiency of Sb2Se3-based solar cells. In this work, the controlled [hk0] or [hk1] orientation of the Sb2Se3 precursor is readily adjusted by tuning the substrate temperature and the distance between the source and the sample in close-space sublimation (CSS). Well-crystallized stoichiometric Sb2Se3 thin films with the desired orientation and large crystal grains are successfully prepared after selenization. Sb2Se3 thin-film solar cells in a substrate configuration of glass/Mo/Sb2Se3/CdS/ITO/Ag are fabricated with a power conversion efficiency of 4.86% with a record open-circuit voltage (VOC) of 509 mV. The significant improvement in VOC is closely related to the quasi-vertically oriented Sb2Se3 absorber layer with reduced deep-level defect density in the bulk and defect passivation at the Sb2Se3/CdS heterojunction. This work indicates that CSS and selenization show a remarkable potential for the fabrication of high-efficiency Sb2Se3 solar cells.

Single-Source Vapor-Deposited Cs2AgBiBr6 Thin Films for Lead-Free Perovskite Solar Cells.

Lead-free double perovskites have been considered as a potential environmentally friendly photovoltaic material for substituting the hybrid lead halide perovskites due to their high stability and nontoxicity. Here, lead-free double perovskite Cs2AgBiBr6 films are initially fabricated by single-source evaporation deposition under high vacuum condition. X-ray diffraction and scanning electron microscopy characterization show that the high crystallinity, flat, and pinhole-free double perovskite Cs2AgBiBr6 films were obtained after post-annealing at 300 °C for 15 min. By changing the annealing temperature, annealing time, and film thickness, perovskite Cs2AgBiBr6 solar cells with planar heterojunction structure of FTO/TiO2/Cs2AgBiBr6/Spiro-OMeTAD/Ag achieve an encouraging power conversion efficiency of 0.70%. Our preliminary work opens a feasible approach for preparing high-quality double perovskite Cs2AgBiBr6 films wielding considerable potential for photovoltaic application.

Single Source Thermal Evaporation of Two-dimensional Perovskite Thin Films for Photovoltaic Applications.

Hybrid two-dimensional (2D) halide perovskites has been widely studied due to its potential application for high performance perovskite solar cells. Understanding the relationship between microstructural and opto-electronic properties is very important for fabricating high-performance 2D perovskite solar cell. In this work, the effect of solvent annealing on grain growth was investigated to enhance the efficiency of photovoltaic devices with 2D perovskite films based on (BA)2(MA)3Pb4I13 prepared by single-source thermal evaporation. Results show that solvent annealing with the introduction of solvent vapor can effectively enhance the crystallization of the (BA)2(MA)3Pb4I13 thin films and produce denser, larger-crystal grains. The thin films also display a favorable band gap of 1.896 eV, which benefits for increasing the charge-diffusion lengths. The solvent-annealed (BA)2(MA)3Pb4I13 thin-film solar cell prepared by single-source thermal evaporation shows an efficiency range of 2.54-4.67%. Thus, the proposed method can be used to prepare efficient large-area 2D perovskite solar cells.

(-)-7(S)-hydroxymatairesinol protects against tumor necrosis factor-α-mediated inflammation response in endothelial cells by blocking the MAPK/NF-κB and activating Nrf2/HO-1.

BACKGROUND: Endothelial inflammation is an increasingly prevalent condition in the pathogenesis of many cardiovascular diseases. (-)-7(S)-hydroxymatairesinol (7-HMR), a naturally occurring plant lignan, possesses both antioxidant and anti-cancer properties and therefore would be a good strategy to suppress tumor necrosis factor-α (TNF-α)-mediated inflammation in vascular endothelial cells (VECs). PURPOSE: The objective of this study is to evaluate for its anti-inflammatory effect on TNF-α-stimulated VECs and underling mechanisms. STUDY DESIGN/METHODS: The effect of the 7-HMR on suppression of TNF-α-induced inflammation mediators in VECs were determined by qRT-PCR and Western blot. MAPKs and phosphorylation of Akt, HO-1 and NF-κB p65 were examined using Western blot. Nuclear localisation of NF-κB was also examined using Western blot and immunofluorescence. RESULTS: Here we found that 7-HMR could suppress TNF-α-induced inflammatory mediators, such as vascularcelladhesion molecule-1, interleukin-6 and inducible nitric oxide synthase expression both in mRNA and protein levels, and concentration-dependently attenuated reactive oxidase species generation. We further identified that 7-HMR remarkably induced superoxide dismutase and heme oxygenase-1 expression associated with degradation of Kelch-like ECH-associated protein 1 (keap1) and up-regulated nuclear factor erythroid 2-related factor 2 (Nrf2). In addition, 7-HMR time- and concentration-dependently attenuated TNF-α-induced phosphorylation of extracellular signal-regulated kinase 1/2 (ERK) and Akt, but not p38, or c-Jun N-terminal kinase 1/2. Moreover, 7-HMR significantly suppressed TNF-α-mediated nuclear factor-κB (NF-κB) activation by inhibiting phosphorylation and nuclear translocation of NF-κB p65. CONCLUSION: Our results demonstrated that 7-HMR inhibited TNF-α-stimulated endothelial inflammation, at least in part, through inhibition of NF-κB activation and upregulation of Nrf2-antioxidant response element signaling pathway, suggesting 7-HMR might be used as a promising vascular protective drug.