Evaluation of Antimicrobial Efficiency, Shear Bond Strength, and Adhesive Remnant Index of TiO2 Infiltrated Orthodontic Adhesive - An In Vitro Study.

Background: Enamel demineralization is an unavoidable adverse effect encountered with bonding brackets in orthodontic therapy. Introducing nanoparticles into the composite adhesive paste can prevent enamel demineralization. Titanium dioxide (TiO2) is known to exhibit direct antimicrobial efficiency. This study aimed to assess the antibacterial efficiency and shear bond strength (SBS) of an orthodontic bonding composite infiltrated with TiO2 nanoparticles. Materials and Methods: This in vitro study evaluated the efficiency of TiO2 nanoparticle-incorporated light-curing orthodontic composite paste (ENLIGHT, ORMCO). Twenty extracted premolars were randomly and equally allocated to the two study groups, N = 10. While a conventional composite was utilized for the bonding brackets in Group I, a TiO2-incorporated composite was used in Group 2. The adhesive remnant index (ARI) scores given by Artun and Bergland et al. and SBS were determined. Furthermore, the antimicrobial efficiency was estimated using the minimum inhibitory concentration (MIC)/minimum bactericidal concentration (MBC) and agar well diffusion assay for six composite disc specimens. The results were statistically analyzed using the chi-square test and Student's t test, at P < 0.05. Results: After 24 h of curing, no statistical mean difference was observed between the two groups in terms of ARI or SBS scores (P > 0.05). However, there was a significant increase in the antimicrobial efficiency of Group II when compared with Group I (P < 0.05). Conclusion: TiO2 nanoparticle-incorporated orthodontic composites improve the antimicrobial efficiency with no significant change in the SBS. The ARI scores indicate the presence of 50% remnant orthodontic composite on the tooth enamel surface post debonding.

Mechanism of Action of Green-Synthesized Silver Nanoparticle-Incorporated Dental Varnish Against Candida albicans.

INTRODUCTION:  Candida albicans, a common fungal pathogen, is often associated with oral infections such as denture stomatitis. Dental varnishes, especially those incorporating antimicrobial agents, have shown promise in preventing C. albicans colonization. This study investigates the antifungal efficacy of a dental varnish incorporating green-synthesized silver nanoparticles (AgNPs) using Ocimum gratissimum and Ocimum tenuiflorum extracts. MATERIALS AND METHODS: AgNPs were synthesized via a green synthesis method using Ocimum extracts. The AgNPs were then incorporated into a dental varnish. The antifungal efficacy of the AgNP-incorporated varnish was evaluated against C. albicans using various assays, including agar well diffusion, time-kill curve, protein leakage, and cytoplasmic leakage analyses. RESULTS: The AgNP-incorporated dental varnish demonstrated significant antifungal activity against C. albicans. The agar well diffusion assay showed a dose-dependent increase in the zone of inhibition, with the highest concentration (100 µg/mL) achieving a zone of 23 mm. The time-kill curve assay indicated a concentration-dependent reduction in colony-forming units (CFU) of C. albicans, with the highest concentration resulting in a CFU reduction to below 103 within five hours. Both protein and cytoplasmic leakage analyses confirmed membrane disruption, showing increased optical density readings at higher concentrations of AgNPs. DISCUSSION: The results suggest that the antifungal activity of the AgNP-incorporated dental varnish is mediated through multiple mechanisms, including membrane disruption, increased permeability leading to protein and cytoplasmic leakage, and possibly the generation of reactive oxygen species (ROS). The varnish's efficacy was comparable to that of commercial antifungal dental varnishes, highlighting its potential as a viable alternative in dental applications. CONCLUSION: Green-synthesized AgNPs, when incorporated into dental varnish, exhibit potent antifungal activity against C. albicans. The study demonstrates that this approach can effectively disrupt fungal cells, suggesting its potential use in preventing and treating oral fungal infections. Future research should explore the in vivo efficacy, safety, and long-term stability of AgNPs in dental varnish formulations.

Evaluation of Antibacterial Effects of an Oral Rinse Containing Ocimum tenuiflorum and Ocimum gratissimum on Streptococcus mutans and Lactobacillus Species.

BACKGROUND AND AIM: Dental caries, primarily caused by Streptococcus mutans and Lactobacillus spp., is a major global health issue. There is a growing need for effective, natural antimicrobial treatments. Ocimum tenuiflorum and Ocimum gratissimum are known for their medicinal properties, including antimicrobial activity. This study investigates the antibacterial efficacy of a herbal oral rinse derived from these plants. This study aimed to evaluate the antibacterial activity of an herbal formulation-based oral rinse prepared from Ocimum tenuiflorum and Ocimum gratissimum against Streptococcus mutans and Lactobacillus spp. METHODS: Fresh leaves of Ocimum tenuiflorum and Ocimum gratissimum were shade-dried, powdered, and extracted in distilled water. The extract was incorporated into an oral rinse formulation. The antibacterial activity was assessed using the agar well diffusion method, protein leakage and cytoplasmic leakage assays, and time-kill curve analysis. A commercial oral rinse was used as a standard. RESULTS: The herbal oral rinse exhibited significant antibacterial activity against both Streptococcus mutans and Lactobacillus spp. The zones of inhibition for Streptococcus mutans were 10 mm, 13 mm, and 15 mm at concentrations of 25 µg/mL, 50 µg/mL, and 100 µg/mL, respectively. For Lactobacillus spp., the inhibition zones were 10 mm, 12 mm, and 14 mm at the same concentrations. The protein leakage and cytoplasmic leakage analysis supported these findings, demonstrating the formulation's efficacy at low concentrations. Time-kill curve assays showed rapid bactericidal action, particularly at higher concentrations. CONCLUSION: The Ocimum tenuiflorum and Ocimum gratissimum-based herbal oral rinse demonstrates strong antibacterial activity against key oral pathogens, suggesting that it could be a natural alternative to conventional oral rinses.

Three-dimensional analysis of the potency of Cocos nucifera in demineralizing the artificial enamel carious lesion: a micro-CT study.

BACKGROUND: Herbal based ingredients form a more sustainable and effective means for management of ailments related to the human body. Previously plant-based extracts of Cocos nucifera had effective remineralization potential. Hence to identify the changes in enamel mineral density and volume during the remineralization procedure, this study was done with an aim of three-dimensional micro-CT analysis to identify the potency of Cocos nucifera in remineralizing the artificial enamel carious lesion. The aim of the present study was a three-dimensional micro-CT analysis to identify of the potency of Cocos nucifera in remineralizing the artificial enamel carious lesion. METHODS: This is an in-vitro study, performed in a laboratory setting. Tooth slabs (N.=35) measuring 3×3×1.5 mm were prepared from extracted molar tooth. The prepared slabs were allotted to their respective groups by block randomization. Demineralization of the tooth slabs were done for a period of 72 hours. Following this the samples were washed with deionized water and remineralization was carried out for a period of 14 days. The groups tested were: 1) only remineralization solution(control); 2) 1: 1 lyophilized coconut (2.5 g LC in 25 mL remineralization solution); 3) 2:1 Lyophilized coconut (5 g LC in 25 mL remineralization solution); 4) 1:1 coconut milk (2.5 g CM in 25 mL remineralization solution); and 5) 2:1 coconut milk (2:1 CM - 5 g CM in 25 mL remineralization solution). Micro-CT scanning and analysis of the samples was performed postdemineralization and postremineralization procedure to evaluate the changes in the enamel volume and enamel mineral density. Within each of the five-group tested, the changes in the enamel volume and density before and after remineralization procedure was statistically analyzed using Paired t-test. One way ANOVA and Post-hoc Tukey test were done to analyze the intergroup statistical significance between the various treatment groups postremineralization procedure. RESULTS: The mean difference of the enamel volume indicates that the control group showed the highest differences (-4.57±0.347) this was seconded by the 1:1 coconut milk, 1:1 lyophilized coconut and the lowest was noted in the 2:1 coconut milk group. The mean differences of the changes in the enamel mineral density between the demineralized and remineralized enamel surface indicates that 2:1 Coconut milk showed highest changes in the surface enamel postdemineralization (-22.32±5.37) and 1:1 coconut milk showed the least of the changes in the surface of the enamel (4.00±3.42). CONCLUSIONS: Coconut extracts obtained from various extraction procedures showed quantitative increase in remineralization of artificially created enamel carious lesion. Further in-vitro studies could be done to the clinical efficiency of the same in oral environment.

Evaluating the Remineralizing Effects of Calcium Sucrose Phosphate and Casein Phosphopeptide-Amorphous Calcium Phosphate Toothpastes on Artificial Carious Lesions Using Micro-computed Tomography: An In Vitro Investigation.

Background White spot lesions (WSLs) are common early indicators of enamel demineralization, particularly in pediatric orthodontic patients. Effective remineralization of these lesions is crucial for preventing further dental decay. This study aimed to evaluate the three-dimensional remineralization efficacy of two commercial toothpastes, calcium sucrose phosphate (CaSP) and casein phosphopeptide-amorphous calcium phosphate (CPP-ACP), using micro-computed tomography (micro-CT). Objectives To compare the remineralization efficacy of CaSP and CPP-ACP on artificially created WSLs in human premolar enamel using micro-CT assessment. Materials and methods Freshly extracted, caries-free human premolars were used for the purpose of the study. Teeth with any defects, including caries, non-carious lesions, fractures, or hypocalcifications, were excluded. Teeth were stored in a saline solution with 0.1% thymol at +4°C until experimentation. Enamel slabs (N = 18) of 3 x 3 x 1.5 mm were prepared from the buccal surfaces of the premolars and polished to a mirror-like finish. The slabs were divided into three groups (n=6 each): control, CaSP, and CPP-ACP. Specimens were demineralized in a demineralization solution for 72 hours and then treated with the respective toothpastes or remineralizing solutions for 13 days. Micro-CT scanning was performed to assess changes in enamel volume and mineral density. Statistical analysis included Shapiro-Wilk tests, paired t-tests, and one-way ANOVA with post-hoc Tukey's HSD tests. Results Enamel volume changes were significant between groups (p<0.01), with the CaSP group showing the largest remineralization effect. Enamel mineral density changes were also significant (p=0.004), with the CPP-ACP group showing the greatest improvement in mineral density.  Conclusions CaSP and CPP-ACP are both effective in remineralizing artificial enamel lesions. While CaSP shows comparable efficacy to CPP-ACP, further research is needed to confirm these findings in clinical settings. CaSP paste can be considered a viable, cost-effective alternative for enamel remineralization.

Cone-Beam Computed Tomography Study of Incisive Canal and Maxillary Central Incisors in Dravidian Population.

INTRODUCTION:  En-masse maxillary anterior retraction is necessary to attain an esthetic profile in Angle's class I bimaxillary dentoalveolar protrusion and Angle's class II division 1 malocclusion. The objective of this study was to evaluate configurational relationships between maxillary incisors and incisive canal in Angle's class I bialveolar protrusion and Angle's class II division 1 malocclusion by cone-beam computed tomography (CBCT). METHODS: A total of 108 adult CBCT scans of 54-skeletal class I bialveolar protrusion and 54-skeletal class II division 1 malocclusions were retrospectively analyzed. Angles between palatal plane and axis of maxillary alveolar border (θ1), incisive canal (θ2), and maxillary right central incisor (θ3) were measured in relation to the midsagittal plane. Linear measurements such as incisive canal width (IC-IC), medial inter-root distance (Rm-Rm), posterior inter-root distance (Rp-Rp), anteroposterior distance from Rm to tangent of right central incisor (11 Rm-Cat), and left central incisor (21 Rm-Cat) corresponding to three vertical levels (L1, L2, and L3) were assessed in axial cross-sectional plane. Association among angular measurements was examined by Spearman correlation coefficient analysis. Mann-Whitney U test compared variables of linear measurements at three vertical levels. RESULTS:  Estimated distance from incisor root to incisive canal was 5-6 mm in both groups slightly influenced by skeletal class and vertical levels but not gender. Mann-Whitney test demonstrated significant differences between groups at three vertical levels (p<0.05). Only θ2 revealed a significant difference (p<0.05) between malocclusions compared to θ1 and θ3. The angular measurements for both malocclusions were positively correlated (p<0.05). CONCLUSION:  Sagittal root-canal cortical plate distance varied significantly in both malocclusions (5-6 mm). Inter-root distance (Rp-Rp) was greater than incisive canal width (IC-IC) at all three vertical levels indicating a reduced possibility of canal invasion after maximum retraction at posterior levels.

Remineralization potential of varying concentrations of two plant-based extracts of Cocos nucifera on white spot lesions using SEM and EDAX analysis: An in vitro study.

Aim: To evaluate the remineralization potential of varying concentrations of two plant-based extracts of Cocos nucifera on white spot lesions using SEM and EDAX in vitro testing methods. Materials and Methods: The pulp was freshly obtained from coconut and divided into two. Then, coconut milk was obtained by blending, while the next portion was freeze-dried and lyophilized. Third molar teeth were processed into tooth slabs (N = 40) and split equally into five groups by block randomization. After demineralization, one tooth slab was taken from each, and SEM analysis was done. Remineralization was then performed among the various groups that included Group 1, which acted as a control and consisted of the remineralization solution. Groups 2 and 3 comprised 1:1 and 2:1 concentrations of the coconut milk, whereas Groups 4 and 5 consisted of 1:1 and 2:1 concentrations of the lyophilized extract. SEM and EDAX testing were done post-remineralization. Ca and phosphate values were tabulated, and statistical significance was determined for the obtained values using ANOVA. Results: Among the control and treatment groups, surface remineralization was better observed in 1:1 coconut milk and 2:1 coconut milk than in the 2:1 lyophilized coconut, control, and 1:1 lyophilized coconut. Between the control and treatment groups, Ca and phosphate percentages (P < 0.001) showed statistical differences. The lowest value of 2.3% was noted in the 2:1 lyophilized coconut group. Conclusion: Coconut extracts exhibit remineralization potential on the artificial carious lesion. Coconut milk exhibited significant improvement in the surface properties than lyophilized coconut.

Comparison of treatment effects during en-masse retraction of upper anterior teeth placed using mini-implants placed at infrazygomatic crest and interradicular sites: A randomized controlled trial.

INTRODUCTION: The objective of this prospective study was to examine the efficacy of posterior interradicular and infrazygomatic crest mini-implants for en-masse anterior retraction. METHODS: The 22 patients were divided into two groups. In group 1 (IZC n = 11), mini-implants were placed in the infrazygomatic crests and in group 2 (IR, n = 11), mini-implants were placed in the molar-premolar interradicular sites. Soft tissue, skeletal, and dental treatment effects between two groups were compared using lateral cephalometric measurements. RESULTS: The average angle between the cranial base and A point was 1.01 degrees (P = .004), and the linear distance between the upper incisor and A point was 2.67 to 5.2 millimetres (P = .00). In IZC group the maxillary incisor to the palatal plane moved upward by a mean of -5.20 mm (P = .059), whereas in IR group the incisor movement changed by -2.67 mm (P = .068). There was no significant difference between groups IZC and IR while comparing overall treatment changes on upper incisor position change, angle, and overjet. CONCLUSIONS: Mini-implants placed in between the molar and premolar as well as the infrazygomatic crest can withstand the deepening of the bite during retraction. Mini-implants in IZC are capable of causing intrusion of the anterior teeth and preventing intrusion of the molars, thereby providing absolute anchoring in all planes. Placement of the mini-implants in the infrazygomatic crest resulted in more linear retraction.

Assessment of Soft Tissue, Airway Dimension and Hyoid Bone Position in Class II Patients Treated by PowerScope Class 2 Corrector.

AIM: This study aims to assess the changes in the soft tissue, pharyngeal airway dimensions, and hyoid bone position in patients treated with PowerScope Class 2 corrector to correct the skeletal Class II pattern. MATERIALS AND METHODS: This study was conducted on a sample of 20 cases diagnosed with Class II malocclusion. The lateral cephalograms were taken before (T1) and after functional appliance therapy (T2) and were traced. The outcomes were compared for the mean changes in soft tissue, airway way dimension, and hyoid bone position. The paired t-test was used for the data comparisons wherein p < 0.05 was kept for statistical significance. RESULTS: The mean values before and after treatment for H angle, mentolabial angle, lower lip E-line, upper lip S-line, lower lip S-line, and lip strain were 19.88 ± 2.77 vs 17.13 ± 1.659, 94.09 ± 12.164 vs 101.75 ± 11.28, -2.47 ± 1.213 vs -1.38 ± 0.976, 3.99 ± 0.19 vs 2.64 ± 0.32, 9.01 ± 0.247 vs 9.43 ± 0.238, 10.24 ± 0.510 vs 10.64 ± 0.52, respectively, which were statistically significant (p < 0.05). All airway spaces (except for lower pharyngeal space) and hyoid bone parameters were significantly improved posttreatment. CONCLUSION: The facial convexity, upper E-line, Z-angle, nasolabial angle, and lower pharyngeal space did not show statistically significant changes. The rest of the soft tissue parameters, oropharyngeal air spaces, and hyoid positioning measured in the study showed significant improvement after treatment with the PowerScope appliance in Class II patients. CLINICAL SIGNIFICANCE: Class II malocclusion is the most common dental anomaly with a high degree of prevalence in the population. This study will help the clinician in understanding the improvement of soft tissue, airway dimension, and hyoid bone position changes on treatment with a fixed functional appliance for the correction of Class II cases, thereby ensuring the greater success of orthodontic therapy in the future.

Enamel Remineralization Efficacy of Coconut Milk and Lyophilized Coconut Extract in Different Concentrations on Demineralized Enamel Surfaces: An In-Vitro Study.

Aim The current study's objective is to determine the remineralizing efficacy of freeze-dried lyophilized coconut extract and coconut milk made from freshly grated coconut on artificial carious lesions produced by pH cycling. Materials and methods Freshly extracted coconut pulp was split into two parts. The first half was blended to obtain coconut milk, and the second part was freeze-dried and lyophilized. Tooth slabs were prepared from extracted third molar teeth. After being demineralized for 72 hours, the tooth samples were remineralized by submerging them in the appropriate remineralizing solution, which is as follows: Group 1 received 25 mL of the Remineralization solution (the control); Group 2 received 2.5 g of coconut milk and 25 mL of the solution (1:1); and Group 3 received 5 g of coconut milk and 25 mL of the solution (2:1). 2.5 g of freeze-dried, lyophilized coconut extract was given to Group 4 along with 25 mL of remineralization solution (1:1), and 5 g of freeze-dried, lyophilized coconut extract was given to Group 5 along with 25 mL of remineralization solution (2:1). Microhardness and contact angle measurements were made. An Excel spreadsheet was filled up with values from after demineralization, and after remineralization. A statistical analysis was performed using SPSS 26.0 (IBM Corp., Armonk, NY). Using descriptive statistics, the pretreatment mean values for the microhardness and contact angle of the various groups were evaluated. Post-hoc Tukey tests were utilized to compare the analytic results of the various groups. Results Among the various concentrations of freshly extracted coconut milk, the contact angle in concentrations of 1:1 was 81.22 ± 1.62 deg, and that in concentrations of 2:1 was 88.01 ± 1.85 deg. Between the two concentrations of the lyophilized coconut extract group, the contact angle in 1:1 was 75.05 ± 2.29 deg, and in 2:1 was 71.37 ± 0.85 deg. In the coconut milk group, the value of microhardness was 261 ± 6.4 kg/cm2 at a lower concentration and 322 ± 3.9 kg/cm2 at a higher concentration. In the lyophilized coconut group, the lower concentration exhibited a microhardness of 211 ± 7.2 kg/cm2, whereas in the higher concentration, it was 324 ± 4.04 kg/cm2. Conclusion Of the various concentrations of coconut milk and lyophilized coconut used, coconut milk at a higher concentration exhibits the highest contact angle, and the latter at a higher concentration exhibits the lowest contact angle. In both groups, high concentrations of the material exhibited high microhardness values compared to lower concentrations of the same.

Small-molecule screen reveals pathways that regulate C4 secretion in stem cell-derived astrocytes.

In the brain, the complement system plays a crucial role in the immune response and in synaptic elimination during normal development and disease. Here, we sought to identify pathways that modulate the production of complement component 4 (C4), recently associated with an increased risk of schizophrenia. To design a disease-relevant assay, we first developed a rapid and robust 3D protocol capable of producing large numbers of astrocytes from pluripotent cells. Transcriptional profiling of these astrocytes confirmed the homogeneity of this population of dorsal fetal-like astrocytes. Using a novel ELISA-based small-molecule screen, we identified epigenetic regulators, as well as inhibitors of intracellular signaling pathways, able to modulate C4 secretion from astrocytes. We then built a connectivity map to predict and validate additional key regulatory pathways, including one involving c-Jun-kinase. This work provides a foundation for developing therapies for CNS diseases involving the complement cascade.

Assessment of Toxicity of Green Synthesized Silver Nanoparticle-coated Titanium Mini-implants with Uncoated Mini-implants: Comparison in an Animal Model Study.

AIM: To assess the potential for systemic toxicity when silver nanoparticle-coated mini-implants were implanted in Wistar albino rats conducted as a comparative study in the animal model by assessing the blood biochemistry, liver and kidney function, and histology of the implanted site. MATERIALS AND METHODS: The surface of the mini-implant was coated with a green-mediated silver nanoparticle. Uncoated mini-implants were placed in two groups of eight Wistar albino rats, and silver nanoparticle-coated mini-implants were placed in another eight rats. The bone's general conditions, blood biochemistry assessing for ALT, AST, GPT, GOT, and histological sections using H and E stain and Masson's Trichrome stain were examined at 7, 14, and 28-day intervals. RESULTS: The creatinine, urea, ALP, and ALT showed no signs of systemic toxicity during the 28-day follow-up period in the Wistar rats both in the test and control groups. The histological evaluation, which was conducted using HE and MTS stain, revealed osteogenesis and adequate healing of the insertion site in the group where coated mini-implant was placed. The bone sample revealed no abnormalities in the control group with uncoated mini-implants. CONCLUSION: Green synthesized silver nanoparticle-coated mini-implant does not cause systemic toxicity as indicated by no abnormalities in the levels of creatinine, urea, ALT, ALP, GPT, and GOT. The bone histology indicates that the coated mini-implants placed in animal bone healed with adequate osteogenesis. CLINICAL SIGNIFICANCE: Silver nanoparticles have potential for antimicrobial activity. Mini-implants placed as temporary anchorage devices in orthodontics often fail due to inflammation and plaque. Silver nanoparticle-coated mini-implants would reduce the risk of mini-implant failure as it would have antimicrobial potential and eliminate this cause for failure of mini-implants. How to cite this article: Sreenivasagan S, Subramanian AK, Mohanraj KG, et al. Assessment of Toxicity of Green Synthesized Silver Nanoparticle-coated Titanium Mini-implants with Uncoated Mini-implants: Comparison in an Animal Model Study. J Contemp Dent Pract 2023;24(12):944-950.

Morphology and gene expression profiling provide complementary information for mapping cell state.

Morphological and gene expression profiling can cost-effectively capture thousands of features in thousands of samples across perturbations by disease, mutation, or drug treatments, but it is unclear to what extent the two modalities capture overlapping versus complementary information. Here, using both the L1000 and Cell Painting assays to profile gene expression and cell morphology, respectively, we perturb human A549 lung cancer cells with 1,327 small molecules from the Drug Repurposing Hub across six doses, providing a data resource including dose-response data from both assays. The two assays capture both shared and complementary information for mapping cell state. Cell Painting profiles from compound perturbations are more reproducible and show more diversity but measure fewer distinct groups of features. Applying unsupervised and supervised methods to predict compound mechanisms of action (MOAs) and gene targets, we find that the two assays not only provide a partially shared but also a complementary view of drug mechanisms. Given the numerous applications of profiling in biology, our analyses provide guidance for planning experiments that profile cells for detecting distinct cell types, disease phenotypes, and response to chemical or genetic perturbations.

A multi-omic analysis of MCF10A cells provides a resource for integrative assessment of ligand-mediated molecular and phenotypic responses.

The phenotype of a cell and its underlying molecular state is strongly influenced by extracellular signals, including growth factors, hormones, and extracellular matrix proteins. While these signals are normally tightly controlled, their dysregulation leads to phenotypic and molecular states associated with diverse diseases. To develop a detailed understanding of the linkage between molecular and phenotypic changes, we generated a comprehensive dataset that catalogs the transcriptional, proteomic, epigenomic and phenotypic responses of MCF10A mammary epithelial cells after exposure to the ligands EGF, HGF, OSM, IFNG, TGFB and BMP2. Systematic assessment of the molecular and cellular phenotypes induced by these ligands comprise the LINCS Microenvironment (ME) perturbation dataset, which has been curated and made publicly available for community-wide analysis and development of novel computational methods ( synapse.org/LINCS_MCF10A ). In illustrative analyses, we demonstrate how this dataset can be used to discover functionally related molecular features linked to specific cellular phenotypes. Beyond these analyses, this dataset will serve as a resource for the broader scientific community to mine for biological insights, to compare signals carried across distinct molecular modalities, and to develop new computational methods for integrative data analysis.

Cephalometric Analysis in Orthodontics Using Artificial Intelligence-A Comprehensive Review.

Artificial intelligence (AI) is a branch of science concerned with developing programs and computers that can gather data, reason about it, and then translate it into intelligent actions. AI is a broad area that includes reasoning, typical linguistic dispensation, machine learning, and planning. In the area of medicine and dentistry, machine learning is currently the most widely used AI application. This narrative review is aimed at giving an outline of cephalometric analysis in orthodontics using AI. Latest algorithms are developing rapidly, and computational resources are increasing, resulting in increased efficiency, accuracy, and reliability. Current techniques for completely automatic identification of cephalometric landmarks have considerably improved efficiency and growth prospects for their regular use. The primary considerations for effective orthodontic treatment are an accurate diagnosis, exceptional treatment planning, and good prognosis estimation. The main objective of the AI technique is to make dentists' work more precise and accurate. AI is increasingly being used in the area of orthodontic treatment. It has been evidenced to be a time-saving and reliable tool in many ways. AI is a promising tool for facilitating cephalometric tracing in routine clinical practice and analyzing large databases for research purposes.

Comparative Assessment of pH and Degree of Surface Roughness of Enamel When Etched with Five Commercially Available Etchants: An In Vitro Study.

AIM: To evaluate the pH and degree of surface roughness caused by five commercially and readily available etchants on tooth enamel. MATERIALS AND METHODS: Five different etchants were chosen. An electric pH meter was utilized to test the pH of the etchants employed. Fifteen maxillary bicuspids that had been extracted were cleansed and stored in thymol solution. The samples were sorted into five groups of three each. A noncontact profilometer was employed to assess the microsurface changes of the pre-etched enamel. The teeth were then etched for 30 seconds with respect to the group to which they belonged before being cleaned and dried. The surface roughness after etching was analyzed, measured and values were tabulated. Descriptive statistics and paired t-test were done. RESULTS: The pH of the etchants and surface roughness of the enamel are varied across the five groups, though they have the same composition of 37% orthophosphoric acid. Etchant from Group C was found to be most acidic while the one manufactured by Group E was least acidic. Ivoclar, DPI, and DTECH showed a statistically significant value in surface roughness parameter post-etching (p <0.05). A statistical difference that was significant was observed with the Kruskal-Wallis test for surface roughness parameter (p <0.05). CONCLUSION: All five etchants had varied pH and the amount of surface roughness was also varied though the composition was the same. Further elemental analysis of these etchants has to be done to validate the results obtained. CLINICAL SIGNIFICANCE: Etchants of the same composition should ideally produce the same effect on the tooth enamel surface, but etchants from different manufacturers produce different levels of surface roughness which could be due to differences in the composition of the prepared etchant. The study was conducted to assist in making an educated selection about the most cost-effective but efficient etchant for clinical application.

The World Wide Web of orthodontics- A comprehensive narrative on teledentistry pertaining to the orthodontics of the 21st century.

Teledentistry has proven effective in practically all dental fields. It also allows access to inaccessible and underdeveloped locations. Better treatment outcomes were documented in patients treated by an orthodontist supervised by teledentistry than by a general dentist with minimal orthodontic experience alone. It may also help to focus referrals to specialists and weed out those who do not need them. But, on a critical note, a doctor-patient relationship is much more than a business transaction. A face-to-face initial consultation instills trust that a remote session cannot. Teledentistry includes professional networking of doctors. This contact includes digital information exchange, CPD programs, case discussions, and analysis that bring dentists from all around the world together to improve patient care. Teledentistry has not only spanned the distance between dentists worldwide, but has also served as a conduit between customer (patient) and manufacturer. This spawned Direct to Consumer (DTC) dentistry, sparking substantial debate among dentists worldwide. In DTC dentistry, inadequately trained customers conduct complex procedures on themselves with minimal guidance of a dentist. One of the major issues today is the general availability of clear aligners to patients without the requirement for an intermediary skilled orthodontist. The American Association of Orthodontists (AAO) has publicly questioned the validity of Smile Direct Club, a private firm that dominates the DTC industry. European Federation of Orthodontic Specialists Association, on the other hand, has sponsored a joint declaration with the representative orthodontic associations in Europe to highlight and alert patients about the potential risks of DTC products. Unfortunately, public shaming hasn't slowed commercialization of DTC firms. Teledentistry has been a boon for healthcare, but a nightmare for our profession, raising fundamental questions like what is the difference between a customer and a patient? Is dentistry a just another discipline of cosmetics? Is teledentistry making us less connected with our patients?

In vitro anti-inflammatory activity of silymarin/hydroxyapatite/chitosan nanocomposites and its cytotoxic effect using brine shrimp lethality assay.

Silymarin, a bioactive compound, is one of the most prominent drugs used in liver diseases. Chitosan and hydroxyapatite (HAP) are the major materials used employed in many biomedical processes like drug delivery, osteointegration, etc. The nanoparticles and nanocomposites are advanced materials with many biomedical applications in diagnosis and therapeutics. In this study, HAP and chitosan were used as a polymeric material, silymarin as a bioactive compound, and other nanoparticle based combinations. The prepared individual materials and nanocomposites were used for the anti-inflammatory activity and brine shrimp lethality assay. The results clearly show that the nanocomposites are good anti-inflammatory agents with lower toxicity.