ABSTRACT
Photocatalytic hydrogen peroxide production from water and oxygen offers a clean and sustainable alternative to the conventional energy-intensive anthraquinone oxidation method. Compared to powdered covalent triazine frameworks (CTFs), the film morphology of CTFs provides better connectivity in 2D, yielding several advantages: more efficient connections between active sites, reduced electron-hole pair recombination, increased resistance to superoxide radical induced corrosion, and decreased light scattering. Leveraging these benefits, it has incorporated dual active sites for both the oxygen reduction reaction (ORR) and the water oxidation reaction (WOR) into a CTF film system. This dual-active CTF film demonstrated an exceptional hydrogen peroxide production rate of 19 460 µmol h⻹ mâ»2 after 1 h and 17 830 µmol h⻹ mâ»2 after 5 h under visible light irradiation (≥420 nm) without the need for sacrificial agents.
ABSTRACT
The development of artificial photocatalysts to convert CO2 into renewable fuels and H2O into O2 is a complex and crucial task in the field of photosynthesis research. The current challenge is to enhance photogenerated charge separation, as well as to increase the oxidation capability of materials. Herein, a molecular junction-type porphyrin-based crystalline photocatalyst (Ni-TCPP-TPyP) was successfully self-assembled by incorporating a nickel porphyrin complex as a reduction site and pyridyl porphyrin as an oxidation site via hydrogen bonding and π-π stacking interactions. The resulting material has a highly crystalline structure, and the formation of inherent molecular junctions can accelerate photogenerated charge separation and transport. Thus, Ni-TCPP-TPyP achieved an excellent CO production rate of 309.3 µmol g-1 h-1 (selectivity, ~100%) without the use of any sacrificial agents, which is more than ten times greater than that of single-component photocatalyst (Ni-TCPP) and greater than that of the most organic photocatalysts. The structure-function relationship was investigated by femtosecond transient absorption spectroscopy and density functional theory calculations. Our work provides new insight for designing efficient artificial photocatalysts, paving the way for the development of clean and renewable fuels through the conversion of CO2 using solar energy.
ABSTRACT
A novel hyper cross-linked polymer of 2-Aminobenzoic acid (HCP-AA) is synthesized for the adsorption of Cr3+ and CO2. The Brunauer-Emmett-Teller surface area of HCP-AA is 615 m2 g-1. HCP-AA of particle size 0.5 nm showed maximum adsorption of Cr3+ for lab prepared wastewater (93%) while it was 88% for real industrial wastewater. It is might be due to electrostatic interactions, cation-π interactions, lone pair interactions and cation exchange at pH 7; contact time of 8 min; adsorbent dose 0.8 g. The adsorption capacity was calculated 52.63 mg g-1 for chromium metal ions at optimum conditions. Freundlich isotherm studies R2 = 0.9273 value is the best fit and follows pseudo second order kinetic model (R2 = 0.979). The adsorption is found non-spontaneous and exothermic through thermodynamic calculations like Gibbs free energy (ΔG), enthalpy change (ΔH) and entropy change (ΔS) were 6.58 kJ mol-1, - 60.91 kJ mol-1 and - 45.79 kJ mol-1 K-1, respectively. The CO2 adsorption capacity of HCP-AA is 1.39 mmol/g with quantity of 31.1 cm3/g (6.1 wt%) at 273Kwhile at 298 K adsorption capacity is 1.12 mmol/g with quantity 25.2 cm3/g (5 wt%). Overall, study suggests that carboxyl (-COOH) and amino (-NH2) groups may be actively enhancing the adsorption capacity of HCP-AA for Cr3+ and CO2.
ABSTRACT
The rational design of covalent organic frameworks (COFs) with hydrochromic properties is of significant value because of the facile and rapid detection of water in diverse fields. In this report, we present a thiazole-linked COF (TZ-COF-6) sensor with a large surface area, ultrahigh stability, and excellent crystallinity. The sensor was synthesized through a simple three-component reaction involving amine, aldehyde, and sulfur. The thiazole and methoxy groups confer strong basicity to TZ-COF-6 at the nitrogen sites, making them easily protonated reversibly by water. Therefore, TZ-COF-6 displayed color change visible to the naked eye from yellow to red when protonated, along with a red shift in absorption in the ultraviolet-visible diffuse reflectance spectra (UV-vis DRS) when exposed to water. Importantly, the water-sensing process was not affected by polar organic solvents, demonstrating greater selectivity and sensitivity compared to other COF sensors. Therefore, TZ-COF-6 was used to detect trace amounts of water in organic solvents. In strong polar solvents, such as N,N-dimethyl formamide (DMF) and ethanol (EtOH), the limit of detection (LOD) for water was as low as 0.06% and 0.53%, respectively. Even after 8 months of storage and 15 cycles, TZ-COF-6 retained its original crystallinity and detection efficiency, displaying high stability and excellent cycle performance.
ABSTRACT
The solar-driven photocatalytic production of hydrogen peroxide (H2O2) from water and oxygen using semiconductor catalysts offers a promising approach for converting solar energy into storable chemical energy. However, the efficiency of photocatalytic H2O2 production is often restricted by the low photo-generated charge separation, slow surface reactions and inadequate stability. Here, we developed a mixed-linker strategy to build a donor-acceptor-acceptor (D-A-A) type covalent organic framework (COF) photocatalyst, FS-OHOMe-COF. The FS-OHOMe-COF structure features extended π-π conjugation that improves charge mobility, while the introduction of sulfone units not only as active sites facilitates surface reactions with water but also bolsters stability through increased interlayer forces. The resulting FS-OHOMe-COF has a low exciton binding energy, long excited-state lifetime and high photo-stability that leads to high performance for photocatalytic H2O2 production (up to 1.0â mM h-1) with an H2O2 output of 19â mM after 72â hours of irradiation. Furthermore, the catalyst demonstrates high stability, which sustained activity over 192â hours of photocatalytic experiment.
ABSTRACT
Electrolysis that reduces carbon dioxide (CO2) to useful chemicals can, in principle, contribute to a more sustainable and carbon-neutral future1-6. However, it remains challenging to develop this into a robust process because efficient conversion typically requires alkaline conditions in which CO2 precipitates as carbonate, and this limits carbon utilization and the stability of the system7-12. Strategies such as physical washing, pulsed operation and the use of dipolar membranes can partially alleviate these problems but do not fully resolve them11,13-15. CO2 electrolysis in acid electrolyte, where carbonate does not form, has therefore been explored as an ultimately more workable solution16-18. Herein we develop a proton-exchange membrane system that reduces CO2 to formic acid at a catalyst that is derived from waste lead-acid batteries and in which a lattice carbon activation mechanism contributes. When coupling CO2 reduction with hydrogen oxidation, formic acid is produced with over 93% Faradaic efficiency. The system is compatible with start-up/shut-down processes, achieves nearly 91% single-pass conversion efficiency for CO2 at a current density of 600 mA cm-2 and cell voltage of 2.2 V and is shown to operate continuously for more than 5,200 h. We expect that this exceptional performance, enabled by the use of a robust and efficient catalyst, stable three-phase interface and durable membrane, will help advance the development of carbon-neutral technologies.
ABSTRACT
Hyper-cross-linked polymers (HCPs) with ultra-high porosity, superior physicochemical stability, and excellent cost-effectiveness are attractive candidates for methane storage. However, the construction of HCPs with BET surface areas exceeding 3000 m2 g-1 remains extremely challenging. In this work, a newly developed DBM-knitting method with a slow-knitting rate is employed to increase the cross-linking degree, in which dichloromethane (DCM) is replaced by dibromomethane (DBM) as both solvent and electrophilic cross-linker, resulting in highly porous and physicochemically stable HCPs. The BET surface areas of DBM-knitted SHCPs-Br are 44%-120% higher than that of DCM-knitted SHCPs-Cl using the same building blocks. Remarkably, SHCP-3-Br exhibits an unprecedentedly high porosity (SBET = 3120 m2 g-1) among reported HCPs, and shows a competitive volumetric 5-100 bar working methane capacity of 191 cm3 (STP) cm-3 at 273 K calculated by using real packing density, which outperforms sate-of-art metal-organic framework (MOFs) at comparable conditions. This facile and versatile low-knitting-rate strategy enables effective improvement in the porosity of HCPs for porosity-desired applications.
ABSTRACT
OBJECTIVE: Anecdotal reports from imaging facilities globally suggest growing radiology interpretation reporting delays. This pilot study's primary aim was to estimate the backlog of formal interpretation of imaging examinations. METHODS: An online survey was distributed to radiologists globally to gather practice-specific characteristics, imaging volumes, and reporting for 3 types of examinations (brain/head CT scans, chest CT scans, and chest radiographs) at 4 time points: 7, 30, 90 days, and 6 months. RESULTS: We received responses from 49 radiologists in 16 countries on six continents. Unreported examinations (backlog) were present in thirty of 44 (68%) facilities. Backlogs for brain/head CT, chest CT, and chest radiographs were present in, respectively, 48%, 50%, and 59% of facilities at 7 days and 20%, 23%, and 32% of facilities at 6 months. When present, the mean proportion of backlog (range) at 7 days was 17% (1 to 96) for brain/head CT, 18% (3 to 82) for chest CT, and 22% (1 to 99) for chest radiographs. CONCLUSIONS: Our findings from this pilot study show a widespread global backlog in reporting common imaging examinations, and further research is needed on the issue and contributing factors.
Subject(s)
Radiology , Humans , Pilot Projects , Radiography , Tomography, X-Ray Computed , RadiologistsABSTRACT
In the first half of the third century B.C., Herophilus and Erasistratus performed the first systematic dissection of the human body. For subsequent centuries, these cadaveric dissections were key to the advancement of anatomical knowledge and surgical techniques. To this day, despite various instructional methods, cadaver dissection remained the best way for surgical training. To improve the quality of education and research through cadaveric dissection, our institution has developed a unique method of perforator-preserving cadaver injection, allowing us to achieve high-fidelity perforator visualization for dissection studies, at low cost and high efficacy. Ten full body cadavers were sectioned through the base of neck, bilateral shoulder, and hip joints. The key was to dissect multiple perfusing arteries and draining veins for each section, to increase "capture" of vascular territories. The vessels were carefully flushed, insufflated, and then filled with latex dye. Our injection dye comprised of liquid latex, formalin, and acrylic paint in the ratio of 1:2:1. Different endpoints were used to assess adequacy of injection, such as reconstitution of eyeball volume, skin turgor, visible dye in subcutaneous veins, and seepage of dye through stab incisions in digital pulps. Dissections demonstrated the effectiveness of the dye, outlining even the small osseous perforators of the medial femoral condyle flap and subconjunctival plexuses. Our technique emphasized atraumatic preparation, recreation of luminal space through insufflation, and finally careful injection of latex dye with adequate curing. This has allowed high-fidelity perforator visualization for dissection studies.
ABSTRACT
Nanohydrogelation of covalent organic frameworks (COFs) will undoubtedly open up new applications for them in water, such as aqueous catalysis and biomedicine. It is currently a great challenge to achieve water dispersion of COFs through either bottom-up construction strategies or top-down exfoliating technologies. Herein, poly(N-isopropylacrylamide) (PNIPAM)-postmodified COF nanohydrogels (COF-NHGs) are successfully designed and synthesized via in situ atom-transfer radical polymerization (ATRP) on a scaffold of COFs. During the polymer growth process, the bulk COFs are exfoliated into nanosheets with a lateral size of â¼500 nm and a thickness of â¼6.5 nm. Moreover, their size can be precisely controlled by the degree of polymerization of PNIPAMs. In aqueous solution, the obtained COF-NHGs are assembled into nanohydrogels retaining intra-plane crystallinity and exhibit a temperature-sensitive sol-gel phase transition. With excellent solubility in organic solvents, the COF-NHGs' intrinsic physical properties in the solution state can be characterized through their solution nuclear magnetic resonance and ultraviolet absorption spectra. These results put forward new opportunities for regulating the solution processability of COFs and building an intelligent, stimuli-response platform of COF-polymer composite nanohydrogels for device applications.
ABSTRACT
INTRODUCTION: Scrotal cancer is a very rare disease, with the most common subtype being squamous cell carcinoma. Metastatic carcinoma to the scrotal wall is very rare. A histological finding of adenocarcinoma in a scrotal malignancy invariably suggests a metastasis from another primary cancer. We describe an enigmatic case of metastatic adenocarcinoma to the scrotum managed as metastatic adenocarcinoma of unknown origin. Attempts to identify a primary cancer were complicated by ambiguous diagnostic results. This is the first case in literature of metastatic cancer to the scrotum from an adenocarcinoma of unknown origin, and this was complicated by concurrent extramammary Paget's disease. CASE PRESENTATION: A 70-year-old male presented with painless progressive scrotal skin swelling, which was shown on histology to be adenocarcinoma. Immunohistochemistry showed prostatic lineage markers. However, the argument for a prostatic primary was weakened by negative prostate transrectal ultrasound biopsy findings and negative radiological findings. The scrotal metastatic adenocarcinoma was managed as metastatic adenocarcinoma of unknown origin. A differential of occult poorly differentiated prostatic primary was considered in view of the clinical phenotype of an elderly male patient with extensive sclerotic bony metastases, immunohistochemistry results and relatively low PSA level in relation to systemic burden of disease. The patient was managed with palliative systemic chemotherapy (carboplatin/paclitaxel) with initial disease response, but eventually developed progressive disease. DISCUSSION AND CONCLUSION: Finding of adenocarcinoma in scrotal skin malignancy indicates a metastasis and should prompt further work-up to identify a primary cancer, particularly of other genitourinary or lower gastrointestinal origin, so that treatment can be targeted at the underlying primary malignancy. However, attempts to identify a primary cancer might be complicated by ambiguous diagnostic results.
Subject(s)
Adenocarcinoma , Carcinoma, Squamous Cell , Paget Disease, Extramammary , Skin Neoplasms , Aged , Male , Humans , ScrotumABSTRACT
BACKGROUND: Current techniques to evaluate computed tomography (CT) foot perfusion in patients with critical limb ischemia use high contrast doses and cannot be used during endovascular procedures. CT perfusion of the foot with intra-arterial contrast injection during endovascular treatment in a hybrid angiography CT suite might solve these problems. PURPOSE: The main objective of this study was to evaluate whether intra-arterial CT foot perfusion using a hybrid CT angiosystem is feasible during endovascular treatment for critical limb ischemia. MATERIAL AND METHODS: This prospective pilot study investigated intraprocedural, intra-arterial CT perfusion of the foot using a hybrid CT angiosystem in 12 patients before and after endovascular treatment for critical limb ischemia. Time to peak (TTP) and arterial blood flow were measured before and after treatment and compared using a paired t test. RESULTS: All 24 CT perfusion maps could be calculated adequately. The contrast volume used for one perfusion CT scan was 4.8 ml. The mean TTP before treatment was 12.8 seconds (standard deviation [SD] 2.8) and the mean TTP posttreatment was 8.4 seconds (SD 1.7), this difference being statistically significant (p=.001). Tendency toward increased blood flow after treatment, 340 ml/min/100 ml (SD 174) vs 514 ml/min/100 ml (SD 366) was noticed (p=.104). The mean effective radiation dose was 0.145 mSv per scan. CONCLUSION: Computed tomography perfusion of the foot with low contrast dose intra-arterial contrast injection during endovascular treatment in a hybrid angiography CT suite is a feasible technique. CLINICAL IMPACT: Intra-arterial CT foot perfusion using a hybrid CT-angiography system is a feasible new technique during endovascular therapy for critical limb ischemia to assess the results of the treament. Future research is necessary in defining endpoints of endovascular treatment and establishing its role in limb salvage prognostication.
ABSTRACT
Arteriovenous fistula (AVF) stenosis is a common problem leading to dialysis access dysfunction. The conventional balloon (CB) is the most commonly used device during angioplasty but suffers from poor durability of results due to neointimal hyperplasia-mediated recurrence. The drug-coated balloon (DCB) is an adjunct to balloon angioplasty that reduces neointimal hyperplasia, thereby improving post-angioplasty patency. Despite the heterogeneity of DCB clinical trials to date, the evidence suggests that DCBs of different brands are not necessarily equal, and that patient selection, adequate lesion preparation and proper DCB procedural technique are important to realize the benefit of DCB angioplasty.
Subject(s)
Angioplasty, Balloon , Arteriovenous Fistula , Arteriovenous Shunt, Surgical , Cardiovascular Agents , Vascular Access Devices , Humans , Vascular Patency , Graft Occlusion, Vascular/diagnostic imaging , Graft Occlusion, Vascular/therapy , Constriction, Pathologic , Hyperplasia , Coated Materials, Biocompatible , Time Factors , Treatment Outcome , Renal Dialysis , Angioplasty, Balloon/methods , Arteriovenous Fistula/diagnostic imaging , Arteriovenous Fistula/therapy , PaclitaxelABSTRACT
Photocatalytic hydrogen evolution through water splitting offers a promising way to convert solar energy into chemical energy. Covalent triazine frameworks (CTFs) are ideal photocatalysts owing to its exceptional in-plane π-conjugation, high chemical stability, and sturdy framework structure. However, CTF-based photocatalysts are typically in powder form, which presents challenges in catalyst recycling and scale-up applications. To overcome this limitation, we present a strategy for producing CTF films with excellent hydrogen evolution rate that are more suitable for large-scale water splitting due to their ease of separation and recyclability. We developed a simple and robust technique for producing CTF films on glass substrates via in-situ growth polycondensation, with thicknesses adjustable from 800â nm to 27â µm. These CTF films exhibit exceptional photocatalytic activity, with the hydrogen evolution reaction (HER) performance reaching as high as 77.8â mmol h-1 g-1 and 213.3â mmol m-2 h-1 with co-catalyst Pt under visible light (≥420â nm). Additionally, they demonstrate good stability and recyclability, further highlighting their potential in green energy conversion and photocatalytic devices. Overall, our work presents a promising approach for producing CTF films suitable for a range of applications and paves the way for further developments in this field.
ABSTRACT
A three-dimensional rigid "six-connected" porous triptycene network based on Tröger's base (TB-PTN) was synthesized by using triptycenes as connectors and Tröger's base as linkers. With characteristics of a high surface area of 1528 m2 g-1, nitrogen-enriched groups, and superior thermal stability, TB-PTN displays a high CO2 uptake of 22.3 wt % (273 K, 1 bar) and excellent iodine vapor adsorption (240 wt %).
ABSTRACT
Recently, photo switching porous materials have been widely reported for low energy costed CO2 capture and release via simply remoted light controlling method. However, most reported photo responsive CO2 adsorbents relied on metal organic framework (MOFs) functionalisation with photochromic moieties, and MOF adsorbents still suffered from chemically and thermally unstable issues. Thus, further metal free and highly stable organic photoresponsive adsorbents are necessary to be developed. CTFs, because of their high porosity and stability, have attracted great attention for CO2 capture. Considering the high CO2 uptake capacity and structural tunability of CTFs, it suggests high potential to fabricate the photoswitching CTF materials by the same functionalisation method as MOFs. Herein, the first series of photo switching CTFs were developed for low energy CO2 capture and release. Apart from that, the CO2 switching efficiency could be doubled either through the azobenzene numbers adjusting method or through the previously reported structural alleviation strategy. Furthermore, the pore size distribution of azobenzene functionalised PCTFs also could be tuned under UV exposure, which may contribute to the UV light induced decrease of CO2 uptake capacity. These photoswitching CTFs represented a new kind of porous polymers for low energy costed CO2 capture.
ABSTRACT
The use of light to regulate photocatalyzed reversible deactivation radical polymerization (RDRP) under mild conditions, especially driven by broadband light or sunlight directly, is highly desired. But the development of a suitable photocatalyzed polymerization system for large-scale production of polymers, especially block copolymers, has remained a big challenge. Herein, we report the development of a phosphine-based conjugated hypercrosslinked polymer (PPh3-CHCP) photocatalyst for an efficient large-scale photoinduced copper-catalyzed atom transfer radical polymerization (Cu-ATRP). Monomers including acrylates and methyl acrylates can achieve near-quantitative conversions under a wide range (450-940 nm) of radiations or sunlight directly. The photocatalyst could be easily recycled and reused. The sunlight-driven Cu-ATRP allowed the synthesis of homopolymers at 200 mL from various monomers, and monomer conversions approached 99% in clouds intermittency with good control over polydispersity. In addition, block copolymers at 400 mL scale can also be obtained, which demonstrates its great potential for industrial applications.