High power and single mode quantum cascade lasers.

We present a single mode quantum cascade laser with nearly 1 W optical power. A buried distributed feedback reflector is used on the back section for wavelength selection. The laser is 6 mm long, 3.5 µm wide, mounted episide-up and the laser facets are left uncoated. Laser emission is centered at 4.68 µm. Single-mode operation with a side mode suppression ratio of more than 30 dB is obtained in whole range of operation. Farfield measurements prove a symmetric, single transverse-mode emission in TM00-mode with typical divergences of 41° and 33° in the vertical and horizontal direction respectively. This work shows the potential for simple fabrication of high power lasers compatible with standard DFB processing.

Extended tuning of mid-ir quantum cascade lasers using integrated resistive heaters.

We present single mode quantum cascade lasers including a microscopic heater for spectral emission tuning. Through the use of a buried heater element, the active region temperature can be modified without changing the submount one. Emission frequency tuning in continuous-wave as large as 9 cm(-1) at 1270 cm(-1) and 14 cm(-1) at 2040 cm(-1) are observed, corresponding to an increase of the active region temperatures of ∼ 90 K. Due to the proximity of the heaters to the active region, emission can be modulated at several kHz range and the absence of moving parts guarantees the mechanical stability of the system. This method can be successfully applied to all buried heterostructure lasers, becoming an attractive solution for molecular spectroscopy in the IR. Using the presented devices, molecular absorptions of N(2)O have been measured between 1270 cm(-1) and 1280 cm(-1) and are in agreement with data from the HITRAN database.

High performance, low dissipation quantum cascade lasers across the mid-IR range.

In this work, we present the development of low consumption quantum cascade lasers across the mid-IR range. In particular, short cavity single-mode lasers with optimised facet reflectivities have been fabricated from 4.5 to 9.2 µm. Threshold dissipated powers as low as 0.5 W were obtained in continuous wave operation at room temperature. In addition, the beneficial impact of reducing chip length on laser mounting yield is discussed. High power single-mode lasers from the same processed wafers are also presented.

Terahertz quantum cascade lasers based on two-dimensional photonic crystal resonators.

We demonstrate high spectral control from surface emitting THz Quantum Cascade Lasers based on a two-dimensional photonic crystal cavity. The perforated top metallic contact acts as an in plane resonator in a tight double-metal plasmonic waveguide providing a strong optical feedback without needing three-dimensional cavity features. The optical far-field patterns do not exhibit the expected symmetry and the shape of the cavity mode. The difference is attributed to a metal surface plasmon mediated light outcoupling mechanism also responsible for the relatively low extraction efficiency.