Design and characterization of the time-resolved opacity spectrometer (OpSpecTR) for the NIF iron opacity campaign.

A new time-resolved opacity spectrometer (OpSpecTR) is currently under development for the National Ignition Facility (NIF) opacity campaign. The spectrometer utilizes Icarus version 2 (IV2) hybridized complementary metal-oxide-semiconductor sensors to collect gated data at the time of the opacity transmission signal, unlocking the ability to collect higher-temperature measurements on NIF. Experimental conditions to achieve higher temperatures are feasible; however, backgrounds will dominate the data collected by the current time-integrating opacity spectrometer. The shortest available OpSpecTR integration time of ∼2 ns is predicted to reduce self-emission and other late-time backgrounds by up to 80%. Initially, three Icarus sensors will be used to collect data in the self-emission, backlighter, and absorption regions of the transmission spectrum, with plans to upgrade to five Daedalus sensors in future implementations with integration times of ∼1.3 ns. We present the details of the diagnostic design along with recent characterization results of the IV2 sensors.

2nd and 3rd order spectral energy corrections with penumbral de-blurring methodology for opacity platform used on the National Ignition Facility.

The Opacity Spectrometer (OpSpec) used in the National Ignition Facility's opacity experiments measures x-ray spectra from 0.9 to 2.1 keV from the different experimental regions: the backlight source, emission source, and the absorption region with the transmission calculated from these regions. The OpSpec designs have gone through several iterations to help improve the signal-to-noise ratio, remove alternate crystal plane reflections, and improve spectral resolution, which helps to increase the validity of the opacity measurements. However, the source spans well outside the current working spectral range, and higher-order reflections are intrinsic to the crystal, which increases the overall signal seen in the data regions. The recorded data are the convolution of 1st order transmission, higher-order reflections, and the penumbra blurring. This work represents the details for deconvolving the 2nd and 3rd order spectral energy corrections with a penumbral de-blurring to correct the relative measurement of x-ray intensity of different spectral energies and further analysis of datasets relevant to the opacity experiments.

Sub-keV design for the National Ignition Facility's soft x-ray Opacity Spectrometer (OpSpec) and expansion plans for time-resolved measurements.

When compared with the National Ignition Facility's (NIF) original soft x-ray opacity spectrometer, which used a convex cylindrical design, an elliptically shaped design has helped to increase the signal-to-noise ratio and eliminated nearly all reflections from alternate crystal planes. The success of the elliptical geometry in the opacity experiments has driven a new elliptical geometry crystal with a spectral range covering 520-1100 eV. When coupled with the primary elliptical geometry, which spans 1000-2100 eV, the new sub-keV elliptical geometry helps to cover the full iron L-shell and major oxygen transitions important to solar opacity experimentation. The new design has been built and tested by using a Henke x-ray source and shows the desired spectral coverage. Additional plans are underway to expand these opacity measurements into a mode of time-resolved detection, ∼1 ns gated, but considerations for the detector size and photometrics mean a crystal geometry redesign. The new low-energy geometry, including preliminary results from the NIF opacity experiments, is presented along with the expansion plans into a time-resolved platform.

Polarization splitting with cubic crystals evaluated with synchrotron radiation.

X-ray polarization-splitting crystals separate incident x rays into two components with perpendicular polarization by Bragg reflections at 45° from paired sets of internal planes. Here, the polarization-splitting properties of a germanium crystal are verified using incompletely polarized synchrotron radiation. Cleaner data would have come from a beam with a higher degree of polarization, which is achievable with small changes in the experimental geometry.

Characterization of Agfa Structurix series D4 and D3sc x-ray films in the 0.7-4.6 keV energy range.

X-ray films remain a key asset for high-resolution x-ray spectral imaging in high-energy-density experiments conducted at the National Ignition Facility (NIF). The soft x-ray Opacity Spectrometer (OpSpec) fielded at the NIF has an elliptically shaped crystal design that measures x rays in the 900-2100 eV range and currently uses an image plate as the detecting medium. However, Agfa D4 and D3sc x-ray films' higher spatial resolution provides increased spectral resolution to the data over the IP-TR image plates, driving the desire for regular use of x-ray film as a detecting medium. The calibration of Agfa D4 x-ray film for use in the OpSpec is communicated here. These calibration efforts are vital to the accuracy of the NIF opacity measurements and are conducted in a previously un-studied x-ray energy range under a new film development protocol required by NIF. The absolute response of Agfa D4 x-ray film from 705 to 4620 eV has been measured using the Nevada National Security Site Manson x-ray source. A broader range of energies was selected to compare results with previously published data. The measurements were taken using selected anodes, filters, and applied voltages to produce well-defined energy lines.

Extension of single-crystal x-ray spectropolarimetry with cubic crystals beyond perfect polarization-splitting geometries.

The single-crystal spectropolarimeter envisioned by Baronova and Stepanenko splits an incident x-ray beam into two beams with mutually orthogonal linear polarizations by using simultaneous reflections at the perfectly polarizing 45° Bragg angle on certain pairs of internal planes in hexagonal or cubic crystals. These planes intersect along a threefold symmetry axis, making a 120° angle with each other, and are typically symmetric with respect to the crystal surface. In practice, the wavelength of the diagnostic x-ray lines does not exactly satisfy Bragg's law for the crystal in the ideal polarizing orientation, so the extinction of reflections is incomplete. Accepting this limitation, this paper shows that for cubic crystals, other pairs of internal planes exist that satisfy the polarization requirements approximately. Typically, they are accessible from the perfect polarization-splitting geometry by small rotations of the crystal. This paper includes examples of such planes for cubic crystals with {110} and {211} surface cuts.

Upgrades and redesign of the National Ignition Facility's soft x-ray opacity spectrometer (OpSpec).

The soft x-ray Opacity Spectrometer (OpSpec) used on the National Ignition Facility (NIF) has recently incorporated an elliptically shaped crystal. The original OpSpec used two convex cylindrical crystals for time-integrated measurements of point-projection spectra from 540 to 2100 eV. However, with the convex geometry, the low-energy portion of the spectrum suffered from high backgrounds due to scattered x-rays as well as reflections from alternate crystal planes. An elliptically shaped crystal allows an acceptance aperture at the crossover focus between the crystal and the detector, which reduces background and eliminates nearly all reflections from alternate crystal planes. The current elliptical design is an improvement from the convex cylindrical design but has a usable energy range from 900 to 2100 eV. In addition, OpSpec is currently used on 18 NIF shots/year, in which both crystals are typically damaged beyond reuse, so efficient production of 36 crystals/year is required. Design efforts to improve the existing system focus on mounting reliability, reducing crystal strain to increase survivability between mounting and shot time, and extending the energy range of the instrument down to 520 eV. The elliptical design, results, and future options are presented.

Cubic crystals in an x-ray polarization-splitting geometry.

Hexagonal and cubic crystals contain paired sets of internal planes that reflect the linearly polarized components of certain x rays into two separate, perpendicular directions. For the cubic crystals, two distinct crystal orientations provide the same polarization-splitting geometry. One of the orientations may have advantages for plasma spectroscopy by suppressing unwanted reflections. This paper demonstrates the two orientations with a germanium crystal and K characteristic lines from copper and zirconium.

Spatially resolved single crystal x-ray spectropolarimetry of wire array z-pinch plasmas.

A recently developed single-crystal x-ray spectropolarimeter has been used to record paired sets of polarization-dependent and axially resolved x-ray spectra emitted by wire array z-pinches. In this measurement, two internal planes inside a suitable crystal diffract the x-rays into two perpendicular directions that are normal to each other, thereby separating incident x-rays into their linearly polarized components. This paper gives considerations for fielding the instrument on extended sources. Results from extended sources are difficult to interpret because generally the incident x-rays are not separated properly by the crystal. This difficulty is mitigated by using a series of collimating slits to select incident x-rays that propagate in a plane of symmetry between the polarization-splitting planes. The resulting instrument and some of the spatially resolved polarized x-ray spectra recorded for a 1-MA aluminum wire array z-pinch at the Nevada Terawatt Facility at the University of Nevada, Reno will be presented.

Ground-state proton decay of 69Br and implications for the 68Se astrophysical rapid proton-capture process waiting point.

We report on the first direct measurement of the proton separation energy for the proton-unbound nucleus (69)Br. Bypassing the (68)Se waiting point in the rp process is directly related to the 2p-capture rate through (69)Br, which depends exponentially on the proton separation energy. We find a proton separation energy for (69)Br of Sp((69)Br )= -785(-40)(+34) keV; this is less bound compared to previous predictions which have relied on uncertain theoretical calculations. The influence of the extracted proton separation energy on the rp process occurring in type I x-ray bursts is examined within the context of a one-zone burst model.

Mechanisms in knockout reactions.

We report the first detailed study of the relative importance of the stripping and diffraction mechanisms involved in nucleon knockout reactions, by the use of a coincidence measurement of the residue and fast proton following one-proton knockout reactions. The measurements used the S800 spectrograph in combination with the HiRA detector array at the NSCL. Results for the reactions 9Be(9C,8B+X)Y and 9Be(8B,7Be+X)Y are presented and compared with theoretical predictions for the two reaction mechanisms calculated using the eikonal model. The data show a clear distinction between the stripping and diffraction mechanisms and the measured relative proportions are very well reproduced by the reaction theory. This agreement adds support to the results of knockout reaction analyses and their applications to the spectroscopy of rare isotopes.

Neutron and proton transverse emission ratio measurements and the density dependence of the asymmetry term of the nuclear equation of state.

Recent measurements of preequilibrium neutron and proton transverse emission from (112,124)Sn+(112,124)Sn reactions at 50 MeV/A have been completed at the National Superconducting Cyclotron Laboratory. Free nucleon transverse emission ratios are compared to those of A=3 mirror nuclei. Comparisons are made to Boltzmann-Uehling-Uhlenbeck (BUU) transport calculations and conclusions concerning the density dependence of the asymmetry term of the nuclear equation of state at subnuclear densities are made. Comparison to BUU model predictions indicate a density dependence of the asymmetry energy that is closer to a form in which the asymmetry energy increases as the square root of the density for the density region studied. A coalescent-invariant analysis is introduced as a means of reducing suggested difficulties with cluster emission in total nucleon emission.

Ambrosia beetle (Coleoptera: Scolytidae) species, flight, and attack on living eastern cottonwood trees.

In spring 2002, ambrosia beetles (Coleoptera: Scolytidae) infested an intensively managed 22-ha tree plantation on the upper coastal plain of South Carolina. Nearly 3,500 scolytids representing 28 species were captured in ethanol-baited traps from 18 June 2002 to 18 April 2004. More than 88% of total captures were exotic species. Five species [Dryoxylon onoharaensum (Murayama), Euwallacea validus (Eichhoff), Pseudopityophthorus minutissimus (Zimmermann), Xyleborus atratus Eichhoff, and Xyleborus impressus Eichhoff]) were collected in South Carolina for the first time. Of four tree species in the plantation, eastern cottonwood, Populus deltoides Bartram, was the only one attacked, with nearly 40% of the trees sustaining ambrosia beetle damage. Clone ST66 sustained more damage than clone S7C15. ST66 trees receiving fertilization were attacked more frequently than trees receiving irrigation, irrigation + fertilization, or controls, although the number of S7C15 trees attacked did not differ among treatments. The study location is near major shipping ports; our results demonstrate the necessity for intensive monitoring programs to determine the arrival, spread, ecology, and impact of exotic scolytids.

New approach for measuring properties of rp-process nuclei.

A new experimental approach was developed that can reduce the uncertainties in astrophysical rapid proton capture (rp) process calculations due to nuclear data. This approach utilizes neutron removal from a radioactive ion beam to populate the nuclear states of interest. Excited states were deduced by the gamma-decay spectra measured in a semiconductor Ge-detector array. In the first case studied, 33Ar, excited states were measured with uncertainties of several keV. The 2 orders of magnitude improvement in the uncertainty of the level energies resulted in a 3 orders of magnitude improvement in the uncertainty of the calculated 32Cl(p,gamma)33Ar rate that is critical to the modeling of the rp process. This approach has the potential to measure key properties of almost all interesting nuclei on the rp-process path.

A randomized, double-blind, placebo-controlled trial of a glycine antagonist in neuropathic pain.

BACKGROUND: Nerve injury results in increases in spinal glutamate, which opens the NMDA ionophore channel, causing an influx of calcium. A glycine-binding site must be occupied for the channel to open. GV196771 is a selective antagonist of the glycine-binding site of the NMDA ionophore. OBJECTIVE: To determine the efficacy of GV196771 in subjects with chronic neuropathic pain in a proof-of-concept study. METHODS: With informed consent, 63 subjects (31 placebo, 32 GV196771) with neuropathic pain (diabetic neuropathy, postherpetic neuralgia, complex regional pain syndrome, or peripheral nerve injury), a visual analogue score averaging > or =30 mm during the screening period, and a well-defined primary area of mechanical allodynia were recruited for the study. A multicenter, randomized, double-blind, placebo-controlled, parallel-group study design was utilized. Subjects came to the research center for a total of five visits over a 21-day period, which consisted of a 14-day treatment period followed by a 7-day washout period. Spontaneous and evoked pain scores, mechanical sensory testing, quantitative sensory testing, Short Form McGill Pain Questionnaire, patient global satisfaction, and safety assessments were made during the study. RESULTS: There was no significant effect of GV196771 on spontaneous or evoked pain, quantitative sensory testing, or patient global satisfaction. There was a significant effect of GV196771 on the area of dynamic and static allodynia on days 7 and 14. The overall incidence of adverse events during treatment was similar for GV196771 (56%) and placebo (71%). The incidence of drug-related adverse events during treatment was higher for placebo (42%) than GV196771 (28%). CONCLUSIONS: Although the glycine antagonists show anti-hyperalgesic action in animal models of neuropathic pain, GV196771 does not appear to be an effective treatment in subjects with chronic neuropathic pain. This may be due to insufficient penetration of GV196771 to central sites of action, differences between the human and animal glycine receptors, or differences between neuropathic pain in animal models and humans.

Long-term methadone treatment: effect on CD4+ lymphocyte counts and HIV-1 plasma RNA level in patients with HIV infection.

The objective was to examine the effect of methadone on CD4+ lymphocyte counts and viral load and to expect to document the safety of methadone maintenance in patients with human immune deficiency syndrome. This is a retrospective chart analysis comparing the trends in CD4+ count and viral load in two populations of 21 human immunodeficiency virus (HIV) infected patients, one on methadone maintenance and a methadone non-using group. Each methadone user was matched with a control methadone non-user that had a similar CD4+ at the beginning of the study. For the CD4+ count we compared the slope of regression for each couple of patients. In 15 patients we also collected the viral load, which was measured at 4-6 monthly intervals. The mean length of follow-up was 811 days for the methadone group and 797 days in the control group. There was no statistical difference in the treatment received by the two groups of patients during the study. The slope of regression of CD4+ count showed a significantly steeper decline in the methadone-using patients compared with the methadone non-users (r= 0.487; p< 0.05). The evolution of the HIV-1 RNA levels was the same during the follow-up of mean 186 months in a few of the patients in each of the two groups. Long-term methadone use was associated with a significantly faster decrease of CD4+ count in HIV-1 affected patients compared with methadone non-users. HIV-1 RNA data were found in too few patients to enable any conclusions about the development of viral load in the two groups.

The use of a computer-based decision support system facilitates primary care physicians' management of chronic pain.

We tested whether computer-based decision support (CBDS) could enhance the ability of primary care physicians (PCPs) to manage chronic pain. Structured summaries were generated for 50 chronic pain patients referred by PCPs to a pain clinic. A pain specialist used a decision support system to determine appropriate pain therapy and sent letters to the referring physicians outlining these recommendations. Separately, five board-certified PCPs used a CBDS system to "treat" the 50 cases. A successful outcome was defined as one in which new or adjusted therapies recommended by the software were acceptable to the PCPs (i.e., they would have prescribed it to the patient in actual practice). Two pain specialists reviewed the PCPs' outcomes and assigned medical appropriateness scores (0 = totally inappropriate to 10 = totally appropriate). One year later, the hospital database provided information on how the actual patients' pain was managed and the number of patients re-referred by their PCP to the pain clinic. On the basis of CBDS recommendations, the PCP subjects "prescribed" additional pain therapy in 213 of 250 evaluations (85%), with a medical appropriateness score of 5.5 +/- 0.1. Only 25% of these chronic pain patients were subsequently re-referred to the pain clinic within 1 yr. The use of a CBDS system may improve the ability of PCPs to manage chronic pain and may also facilitate screening of consults to optimize specialist utilization.

Topical delivery of lidocaine in healthy volunteers by electroporation, electroincorporation, or iontophoresis: an evaluation of skin anesthesia.

BACKGROUND AND OBJECTIVES: This study was designed to compare the onset, duration, and depth of local anesthesia after the topical delivery of lidocaine using electroporation (EP), electroincorporation (EI), and iontophoresis (IP) in healthy volunteers. EP and EI were performed with prototype devices and IP with a commercial drug/device product. METHODS: A double-blind, crossover study design was used for 10 randomized volunteers selected for EP treatment with either 4%, 10%, or 20% lidocaine or placebo normal saline. Because it was impossible to blind between IP, EP, and EI, an open label study with randomized volunteers was selected for IP and EP treatments. Onset and duration of anesthesia was determined by measuring warm sensation, cool sensation, and hot pain; depth of anesthesia was determined by measurement of pain sensation to a 27-gauge needle passed through the skin. RESULTS: For EP, all concentrations of lidocaine produced significant changes from baseline on 2 or 3 efficacy measures, however, the 4% concentration appeared to be the most efficacious when delivered by the EP method. The EP and EI methods produced a significant elevation in all 3 thermal thresholds, whereas IP produced significant elevations in cool and warm thresholds only. However, IP resulted in a greater depth of anesthesia. Plasma lidocaine levels were undetectable. CONCLUSIONS: The transdermal delivery of lidocaine by IP, EP, and EI results in similar surface skin anesthesia; however, IP results in a greater depth of anesthesia. Reg Anesth Pain Med 2001;26:229-238.

Tutorials in clinical research: part III. Selecting a research approach to best answer a clinical question.

OBJECTIVE: This is the third in a series of sequential "Tutorials in Clinical Research." The objectives of this specific report are to enable the reader to rapidly dissect a clinical question or article to efficiently determine what critical mass of information is required to answer the question and what study design is likely to produce the answer. STUDY DESIGN: Tutorial. METHODS: The authors met weekly for 3 months exploring clinical problems and systematically recording the logic and procedural pathways from multiple clinical questions to the selection of proper research approaches. The basic elements required to understand the processes of selection were catalogued and field tested, and a report was produced to define and explain these elements. RESULTS: Fundamental to a research approach is the assembly of subjects and the allocation of exposures. An algorithm leading to the selection of an approach is presented. The report is organized into three parts. The tables serve as a rapid reference section. The initial two-part narrative explains the process of approach selection. The examples section illustrates the application of the selection algorithm. CONCLUSIONS: Selecting the proper research approach has six steps: the question, logic and ethics,identification of variables, data display considerations, original data source considerations, and selection of prototypical approaches for assembly of subjects. Field tests of this approach consistently demonstrated its utility.