Enhanced continuous atmospheric water harvesting with scalable hygroscopic gel driven by natural sunlight and wind.

Sorption-based atmospheric water harvesting (SAWH) has received unprecedented attention as a future water and energy platform. However, the water productivity of SAWH systems is still constrained by the slow sorption kinetics at material and component levels and inefficient condensation. Here, we report a facile method to prepare hygroscopic interconnected porous gel (HIPG) with fast sorption-desorption kinetics, high scalability and stability, and strong adhesion property for highly efficient SAWH. We further design a solar-wind coupling driven SAWH device with collaborative heat and mass enhancement achieving continuous water production. Concentrated sunlight contributes to enhancing the desorption and condensation synergistically, and natural wind is introduced to drive the device operation and improve the sorption kinetics. The device demonstrated record high working performance of 14.9 Lwater m-2 day-1 and thermal efficiency of 25.7% in indoor experiments and 3.5-8.9 Lwater m-2 day-1 in outdoor experiments by solar concentration without any other energy consumption. This work provides an up-and-coming pathway to realize highly efficient and sustainable clean water supply for off-grid and arid regions.

Ultra-high freshwater production in multistage solar membrane distillation via waste heat injection to condenser.

Passive solar membrane distillation (MD) is an emerging technology to alleviate water scarcity. Recently, its performance has been enhanced by multistage design, though the gains are marginal due to constrained temperature and vapor pressure gradients across the device. This makes condenser cooling enhancement a questionable choice. We argue that condenser heating could suppress the marginal effect of multistage solar MD by unlocking the moisture transport limit in all distillation stages. Here, we propose a stage temperature boosting (STB) concept that directs low-temperature heat to the condensers in the last stages, enhancing moisture transport across all stages. Through STB in the last two stages with a heat flux of 250 W m-2, a stage-averaged distillation flux of 1.13 L m-2 h-1 S-1 was demonstrated using an 8-stage MD device under one-sun illumination. This represents an 88% enhancement over the state-of-the-art 10-stage solar MD devices. More notably, our analysis indicates that 16-stage STB-MD devices driven by solar energy and waste heat can effectively compete with existing photovoltaic reverse osmosis (PV-RO) systems, potentially elevating freshwater production with low-temperature heat sources.

Effect of Serum IL-6 Levels on the Progression of Non-Target Lesions in Patients after Coronary Stenting.

Background: percutaneous coronary intervention (PCI) has become the mainstay of treatment for atherosclerotic cardiovascular disease (ASCVD). Inflammatory factors have been shown to be involved in the initiation and progression of ASCVD. After PCI, the persistence of inflammation, especially the inflammation released at the target lesion, may affect the stability of non-target lesion plaques. Interleukin-6 (IL-6) is one of the most common inflammatory factors, however studies about the influence of IL-6 on the progression of non-target lesions (NTLs) of coronary artery are limited. This study investigated whether serum IL-6 levels can affect the progression of NTLs after coronary stent implantation. Methods: We performed a retrospective cohort study including 441 patients undergoing coronary angiography (CAG) and stent implantation, who had at least one NTL, between January 2019 and December 2021. They underwent followup CAG 9 to 12 months after PCI. Quartile grouping was based on serum IL-6 levels following readmission. The relationship between serum IL-6 levels and the progression of NTLs after coronary stent implantation was analyzed by using logistic regression analysis and restricted cubic spline regression. Predictive value of IL-6 on NTL progression was evaluated using the receiver operating characteristic (ROC) curve. Results: When compared to the first quartile (Q1) group, the probability of NTL progression was increased in Q2 (adjusted odds ratio (aOR) 3.06, 95% CI 1.29-7.29), Q3 (aOR 3.55, 95% CI 1.52-8.26), and Q4 group (aOR 7.51, 95% CI 3.30-17.05), with a trend test p < 0.001. With the increase of IL-6 levels, the risk of progression of NTLs gradually increased, and there was a non-linear relationship between IL-6 and progression of NTLs (p < 0.001). The ROC curve showed that the critical value of the serum IL-6 level was 12.652 pg/mL (area under the curve is 0.673, sensitivity is 54.5%, specificity is 70.9%, p < 0.05). Conclusions: A high serum IL-6 level is an independent risk factor for the progression of NTLs after coronary stent implantation, and has certain predictive value for the progression of NTLs.

Internally-cooled atmospheric water harvesting enabling improved productivity.

Sorption-based atmospheric water harvesting holds promise for alleviating water scarcity, but current prototypes have not shown significant increases in practical yields despite efforts in the enlarged engineering scale. This is due to weakened heat and mass transfer with a packed sorbent bed. In this work, the desiccant-coated adsorbers were employed to fabricate the water harvesting device that incorporates internal fluid for cooling and heating during sorption and desorption. Featured with an internal cooling effect, practical water productivity could be improved by 1.75-9.96 times with a low desorption temperature (45-62 °C). The continuous water harvesting system could produce 0.77-3.98 Lwater/kgsorbent/day with a thermal energy consumption of 7.7-30.4 MJ/kg in wide climates from 20 % to 80 % RH, providing a reference for device design in the engineering view. The demonstration revealed that using natural cooling in the sorption stage has great benefits in improving water harvesting performance, which can be integrated into the building sectors or a wider range of scenarios.

Advanced Anti-Icing Strategies and Technologies by Macrostructured Photothermal Storage Superhydrophobic Surfaces.

Water is the source of life and civilization, but water icing causes catastrophic damage to human life and diverse industrial processes. Currently, superhydrophobic surfaces (inspired by the lotus effect) aided anti-icing attracts intensive attention due to their energy-free property. Here, recent advances in anti-icing by design and functionalization of superhydrophobic surfaces are reviewed. The mechanisms and advantages of conventional, macrostructured, and photothermal superhydrophobic surfaces are introduced in turn. Conventional superhydrophobic surfaces, as well as macrostructured ones, easily lose the icephobic property under extreme conditions, while photothermal superhydrophobic surfaces strongly rely on solar illumination. To address the above issues, a potentially smart strategy is found by developing macrostructured photothermal storage superhydrophobic (MPSS) surfaces, which integrate the functions of macrostructured superhydrophobic materials, photothermal materials, and phase change materials (PCMs), and are expected to achieve all-day anti-icing in various fields. Finally, the latest achievements in developing MPSS surfaces, showcasing their immense potential, are highlighted. Besides, the perspectives on the future development of MPSS surfaces are provided and the problems that need to be solved in their practical applications are proposed.

An atmospheric water harvesting system based on the "Optimal Harvesting Window" design for worldwide water production.

Atmospheric water harvesting (AWH) is a promising solution to the water shortage problem. Current sorption-based AWH (SAWH) systems seldom obtain both wide climatic adaptability and high energy efficiency due to the lack of thermodynamic optimization. To achieve the ideal harvesting circulation in SAWH systems, the "optimal harvesting window" (OHW) design based on thermodynamic analysis was first proposed and validated by our prototype. The "OHW" theory indicates the water production rate and energy efficiency could be improved by properly reducing the adsorption temperature. As the humidity increases, the optimal adsorption temperature should be closer to the dew point of the environment. Experimental results revealed that, loaded with 3 kg widely adopted silica gel, the daily water production could reach 5.76-17.64 L/d with ultrahigh energy efficiency of 0.46-1.5 L/kWh. This prototype could also achieve optimal performance in wide climatic conditions in terms of 13-35 °C and 18%-72% RH. Lastly, the performance of photovoltaic (PV)-driven SAWH was evaluated. Results showed that a 1 m2 PV panel could generate 0.66-2 L water per day in Shanghai throughout the year, the highest in opening literature. Notably, this work introduces a promising concept that can help achieve large-scale, ultra-fast, energy-efficient AWH worldwide.

Understanding and Utilizing Droplet Impact on Superhydrophobic Surfaces: Phenomena, Mechanisms, Regulations, Applications, and Beyond.

Droplet impact is a ubiquitous liquid behavior that closely tied to human life and production, making indispensable impacts on the big world. Nature-inspired superhydrophobic surfaces provide a powerful platform for regulating droplet impact dynamics. The collision between classic phenomena of droplet impact and the advanced manufacture of superhydrophobic surfaces is lighting up the future. Accurately understanding, predicting, and tailoring droplet dynamic behaviors on superhydrophobic surfaces are progressive steps to integrate the droplet impact into versatile applications and further improve the efficiency. In this review, the progress on phenomena, mechanisms, regulations, and applications of droplet impact on superhydrophobic surfaces, bridging the gap between droplet impact, superhydrophobic surfaces, and engineering applications are comprehensively summarized. It is highlighted that droplet contact and rebound are two focal points, and their fundamentals and dynamic regulations on elaborately designed superhydrophobic surfaces are discussed in detail. For the first time, diverse applications are classified into four categories according to the requirements for droplet contact and rebound. The remaining challenges are also pointed out and future directions to trigger subsequent research on droplet impact from both scientific and applied perspectives are outlined. The review is expected to provide a general framework for understanding and utilizing droplet impact.

Progress and perspectives of sorption-based atmospheric water harvesting for sustainable water generation: Materials, devices, and systems.

Establishing alternative methods for freshwater production is imperative to effectively alleviate global water scarcity, particularly in land-locked arid regions. In this context, extracting water from the ubiquitous atmospheric moisture is an ingenious strategy for decentralized freshwater production. Sorption-based atmospheric water harvesting (SAWH) shows strong potential for supplying liquid water in a portable and sustainable way even in desert environments. Herein, the latest progress in SAWH technology in terms of materials, devices, and systems is reviewed. Recent advances in sorbent materials with improved water uptake capacity and accelerated sorption-desorption kinetics, including physical sorbents, polymeric hydrogels, composite sorbents, and ionic solutions, are discussed. The thermal designs of SAWH devices for improving energy utilization efficiency, heat transfer, and mass transport are evaluated, and the development of representative SAWH prototypes is clarified in a chronological order. Thereafter, state-of-the-art operation patterns of SAWH systems, incorporating intermittent, daytime continuous and 24-hour continuous patterns, are examined. Furthermore, current challenges and future research goals of this cutting-edge field are outlined. This review highlights the irreplaceable role of heat and mass transfer enhancement and facile structural improvement for constructing high-yield water harvesters.

Protocol for preparation of LiCl-based ultra-hygroscopic curdlan heat exchanger for dehumidification.

Desiccant-coated heat exchangers provide a practical solution for the efficient removal of moisture from the air. Here, we present a protocol to synthesize an ultra-hygroscopic polymer to develop a LiCl loaded in curdlan hydrogel (LiCl@Cur)-coated heat exchanger for deep dehumidification. We describe steps for preparing the curdlan gel solution, hydrogel, LiCl solution, and LiCl@Cur. We then detail procedures for preparing curdlan-coated and LiCl@Cur-coated heat exchangers. The coated heat exchanger described in this protocol has a maximum dehumidification capacity of 12 g/kg. For complete details on the use and execution of this protocol, please refer to Pan et al. (2023).1.

Sustainable cooling with water generation.

Dual-use devices offer a different path for more-sustainable living.

All-Day Multicyclic Atmospheric Water Harvesting Enabled by Polyelectrolyte Hydrogel with Hybrid Desorption Mode.

Sorption-based atmospheric water harvesting (AWH) is a promising approach for mitigating worldwide water scarcity. However, reliable water supply driven by sustainable energy regardless of diurnal variation and weather remains a long-standing challenge. To address this issue, a polyelectrolyte hydrogel sorbent with an optimal hybrid-desorption multicyclic-operation strategy is proposed, achieving all-day AWH and a significant increase in daily water production. The polyelectrolyte hydrogel possesses a large interior osmotic pressure of 659 atm, which refreshes sorption sites by continuously migrating the sorbed water within its interior, and thus enhancing sorption kinetics. The charged polymeric chains coordinate with hygroscopic salt ions, anchoring the salts and preventing agglomeration and leakage, thereby enhancing cyclic stability. The hybrid desorption mode, which couples solar energy and simulated waste heat, introduces a uniform and adjustable sorbent temperature for achieving all-day ultrafast water release. With rapid sorption-desorption kinetics, an optimization model suggests that eight moisture capture-release cycles are capable of achieving high water yield of 2410 mLwater kgsorbent -1 day-1 , up to 3.5 times that of single-cyclic non-hybrid modes. The polyelectrolyte hydrogel sorbent and the coupling with sustainable energy driven desorption mode pave the way for the next-generation AWH systems, significantly bringing freshwater on a multi-kilogram scale closer.

Sorption-Based Atmospheric Water Harvesting: Materials, Components, Systems, and Applications.

Freshwater scarcity is a global challenge posing threats to the lives and daily activities of humankind such that two-thirds of the global population currently experience water shortages. Atmospheric water, irrespective of geographical location, is considered as an alternative water source. Sorption-based atmospheric water harvesting (SAWH) has recently emerged as an efficient strategy for decentralized water production. SAWH thus opens up a self-sustaining source of freshwater that can potentially support the global population for various applications. In this review, the state-of-the-art of SAWH, considering its operation principle, thermodynamic analysis, energy assessment, materials, components, different designs, productivity improvement, scale-up, and application for drinking water, is first extensively explored. Thereafter, the practical integration and potential application of SAWH, beyond drinking water, for wide range of utilities in agriculture, fuel/electricity production, thermal management in building services, electronic devices, and textile are comprehensively discussed. The various strategies to reduce human reliance on natural water resources by integrating SAWH into existing technologies, particularly in underdeveloped countries, in order to satisfy the interconnected needs for food, energy, and water are also examined. This study further highlights the urgent need and future research directions to intensify the design and development of hybrid-SAWH systems for sustainability and diverse applications.

Exposure to perchlorate, nitrate, and thiocyanate and the prevalence of abdominal aortic calcification.

Perchlorate, nitrate, and thiocyanate are reported to affect human health. However, it is unclear about the associations between exposure to these chemicals and abdominal aortic calcification (AAC). A total of 959 individuals were included in a large representative survey. Urinary levels of perchlorate, nitrate, and thiocyanate were measured by ion chromatography coupled with electrospray tandem mass spectrometry. AAC was diagnosed based on dual-energy X-ray absorptiometry (DXA). There were 276 (28.8%) cases of AAC among the participants. The level of urinary nitrate was significantly lower in AAC patients compared with non-AAC patients (36.4 mg/L [20.6, 59.5] vs. 42.4 [23.8, 68.3]; P = 0.013). In multivariable-adjusted logistic regression models, urinary nitrate was associated with the prevalence of AAC. Compared with the lowest quartile, the odds ratios (95% confidence intervals) across increasing quartiles were 1.06 (0.69-1.61; P = 0.799), 0.64 (0.41-1.00; P = 0.049) and 0.74 (0.47-1.15; P = 0.180). Restricted cubic splines suggested that urinary nitrate ranging between 43.7 and 115.4 mg/L was associated with a lower risk of AAC. Moderate exposure to nitrate was associated with a lower risk of AAC.

Simultaneous atmospheric water production and 24-hour power generation enabled by moisture-induced energy harvesting.

Water and electricity scarcity are two global challenges, especially in arid and remote areas. Harnessing ubiquitous moisture and sunlight for water and power generation is a sustainable route to address these challenges. Herein, we report a moisture-induced energy harvesting strategy to realize efficient sorption-based atmospheric water harvesting (SAWH) and 24-hour thermoelectric power generation (TEPG) by synergistically utilizing moisture-induced sorption/desorption heats of SAWH, solar energy in the daytime and radiative cooling in the nighttime. Notably, the synergistic effects significantly improve all-day thermoelectric power density (~346%) and accelerate atmospheric water harvesting compared with conventional designs. We further demonstrate moisture-induced energy harvesting for a hybrid SAWH-TEPG device, exhibiting high water production of 750 g m-2, together with impressive thermoelectric power density up to 685 mW m-2 in the daytime and 21 mW m-2 in the nighttime. Our work provides a promising approach to realizing sustainable water production and power generation at anytime and anywhere.

Protocol for atmospheric water harvesting using in situ polymerization honeycomb hygroscopic polymers.

Atmospheric water harvesting (AWH) offers a solution for efficiently extracting water from the air. In this protocol, we detail the steps to develop a composite sorbent loaded with hygroscopic salts and lithium chloride (LiCl) and based on hydrogel, acrylamide monomer (AM), and carbon nanotubes (CNTs). We describe a streamlined experimental approach for the synthesis of the honeycomb-optimized hydrogel-based composite adsorbent (PCLG) by in situ polymerization. The produced sorbent exhibits ultra-high adsorption/desorption capacity per unit volume and low-temperature desorption. For complete details on the use and execution of this protocol, please refer to Wang et al. (2022).

Pathways to Energy-efficient Water Production from the Atmosphere.

Atmospheric water harvesting (AWH) provides a fascinating chance to facilitate a sustainable water supply, which obtains considerable attention recently. However, ignoring the energy efficiency of AWH leads to high energy consumption in current prototypes (ca. 101 to 102  MJ kg-1 ), misfitting with the high-strung and complicated water-energy nexus. In this perspective, a robust evaluation of existing AWHs is conducted and a detailed way to high-efficiency AWH is paved. The results suggest that using cooling-assisted adsorption will weaken the bounds of climate to sorbent selections and have the potential to improve efficiency by more than 50%. For device design, the authors deeply elucidate how to perfect heat/mass transfer to narrow the gap between lab and practices. Reducing heat loss, recovering heat and structured sorbent are the main paths to improve efficiency on the device scale, which is more significant for a large-scale AWH. Besides efficiency, the techno-economic evaluation reveals that developing a cost-effective AWH is also crucial for sustainability, which can be contributed by green synthesis routes and biomass-based sorbents. These analyses provide a uniform platform to guide the next-generation AWH to mitigate the global water crisis.

Hygroscopic Porous Polymer for Sorption-Based Atmospheric Water Harvesting.

Sorption-based atmospheric water harvesting (SAWH) holds huge potential due to its freshwater capabilities for alleviating water scarcity stress. The two essential parts, sorbent material and system structure, dominate the water sorption-desorption performance and the total water productivity for SAWH system together. Attributed to the superiorities in aspects of sorption-desorption performance, scalability, and compatibility in practical SAWH devices, hygroscopic porous polymers (HPPs) as next-generation sorbents are recently going through a vast surge. However, as HPPs' sorption mechanism, performance, and applied potential lack comprehensive and accurate guidelines, SAWH's subsequent development is restricted. To address the aforementioned problems, this review introduces HPPs' recent development related to mechanism, performance, and application. Furthermore, corresponding optimized strategies for both HPP-based sorbent bed and coupling structural design are proposed. Finally, original research routes are directed to develop next-generation HPP-based SAWH systems. The presented guidelines and insights can influence and inspire the future development of SAWH technology, further achieving SAWH's practical applications.

Exceptional water production yield enabled by batch-processed portable water harvester in semi-arid climate.

Sorption-based atmospheric water harvesting has the potential to realize water production anytime, anywhere, but reaching a hundred-gram high water yield in semi-arid climates is still challenging, although state-of-the-art sorbents have been used. Here, we report a portable and modularized water harvester with scalable, low-cost, and lightweight LiCl-based hygroscopic composite (Li-SHC) sorbents. Li-SHC achieves water uptake capacity of 1.18, 1.79, and 2.93 g g-1 at 15%, 30%, and 60% RH, respectively. Importantly, considering the large mismatch between water capture and release rates, a rationally designed batch processing mode is proposed to pursue maximum water yield in a single diurnal cycle. Together with the advanced thermal design, the water harvester shows an exceptional water yield of 311.69 g day-1 and 1.09 g gsorbent-1 day-1 in the semi-arid climate with the extremely low RH of ~15%, demonstrating the adaptability and possibility of achieving large-scale and reliable water production in real scenarios.