Vitrimer-Like Shape Memory Polymers: Characterization and Applications in Reshaping and Manufacturing.

The shape memory effect (SME) refers to the ability of a material to recover its original shape, but only in the presence of a right stimulus. Most polymers, either thermo-plastic or thermoset, can have the SME, although the actual shape memory performance varies according to the exact material and how the material is processed. Vitrimer, which is between thermoset and thermo-plastic, is featured by the reversible cross-linking. Vitrimer-like shape memory polymers (SMPs) combine the vitrimer-like behavior (associated with dissociative covalent adaptable networks) and SME, and can be utilized to achieve many novel functions that are difficult to be realized by conventional polymers. In the first part of this paper, a commercial polymer is used to demonstrate how to characterize the vitrimer-like behavior based on the heating-responsive SME. In the second part, a series of cases are presented to reveal the potential applications of vitrimer-like SMPs and their composites. It is concluded that the vitrimer-like feature not only enables many new ways in reshaping polymers, but also can bring forward new approaches in manufacturing, such as, rapid 3D printing in solid state on space/air/sea missions.

Thermo-Responsive Shape Memory Effect and Conversion of Porous Structure in a Polyvinyl Chloride Foam.

In this paper, a thermo-responsive shape memory effect in a polyvinyl chloride thermoset foam is characterized. Excellent shape recovery performance is observed in foam samples programmed both at room temperature and above their transition temperature. The conversion of porous structures in the foam from closed-cell to open-cell after a shape memory effect cycle is revealed via a series of specially designed oil-dripping experiments and optical images of the micro pores. Programming the strain higher than 20% results in an apparent increase in open-cell level, whereas programming temperatures have almost no influence.

A Brief Review of the Shape Memory Phenomena in Polymers and Their Typical Sensor Applications.

In this brief review, an introduction of the underlying mechanisms for the shape memory effect (SME) and various shape memory phenomena in polymers is presented first. After that, a summary of typical applications in sensors based on either heating or wetting activated shape recovery using largely commercial engineering polymers, which are programmed by means of in-plane pre-deformation (load applied in the length/width direction) or out-of-plane pre-deformation (load applied in the thickness direction), is presented. As demonstrated by a number of examples, many low-cost engineering polymers are well suited to, for instance, anti-counterfeit and over-heating/wetting monitoring applications via visual sensation and/or tactual sensation, and many existing technologies and products (e.g., holography, 3D printing, nano-imprinting, electro-spinning, lenticular lens, Fresnel lens, QR/bar code, Moiré pattern, FRID, structural coloring, etc.) can be integrated with the shape memory feature.

Elastic Shape Memory Hybrids Programmable at Around Body-Temperature for Comfort Fitting.

A series of silicone based elastic shape memory hybrids are fabricated. Their shape memory performance, mechanical behaviors at room temperature with/without programming and during fitting at 37 °C are investigated. It is found that these materials have good shape memory effect and are always highly elastic. At 37 °C, there are 10 min or more for fitting. Thus, it is concluded that this type of material has great potential as an elastic shape memory material for comfort fitting.