In Situ Construction of SnS2@SnO2 Heterostructure for Photo-Assisted Electrocatalysis of Oxygen Evolution Reaction.

Photo-assisted electrocatalysis has arisen as a promising approach for hydrogen generation by incorporating photocatalysts into electrocatalysts. 2D SnS2 is a photocatalyst that absorbs visible light. However, the rapid recombination of photo-generated electron-hole pairs significantly reduces the overall photocatalytic efficiency of SnS2, limiting its practical application. Thus, this study prepares an in situ heterojunction SnS2@SnO2 using a one-step hydrothermal method. The degradation efficiency of methyl orange (MO) using SnS2@SnO2 is measured, achieving a degradation rate of 92.75% within 1 h, which is 1.9 times higher than that of pure SnS2. Additionally, FeNiS/SnS2@SnO2 is synthesized and exhibited significant improvements in the photo-assisted oxygen evolution reaction (OER). It achieves an overpotential of 260 mV and a Tafel slope of 65.1 mV dec-1 at 10 mA cm-2, showing reductions of 11.8% and 31.8%, respectively, compared to FeNiS alone. These enhancements highlight the strong photo-response capability of SnS2@SnO2. Under the internal electric field of SnS2@SnO2, the photogenerated electrons in the conduction band of SnS2 quickly move toward SnO2, facilitating efficient photocatalytic reactions. FeNiS, with a lower Fermi energy level (EF), facilitates electron transfer from SnS2@SnO2 and enhances OER performance by efficiently participating in the reaction. This study paves a new path for 2D photocatalyst materials.

Artificial Meshed Vessel-Induced Dimensional Breaking Growth of Human Brain Organoids and Multiregional Assembloids.

Brain organoids are widely used to model brain development and diseases. However, a major challenge in their application is the insufficient supply of oxygen and nutrients to the core region, restricting the size and maturation of the organoids. In order to vascularize brain organoids and enhance the nutritional supply to their core areas, two-photon polymerization (TPP) 3D printing is employed to fabricate high-resolution meshed vessels in this study. These vessels made of photoresist with densely distributed micropores with a diameter of 20 µm on the sidewall, are cocultured with brain organoids to facilitate the diffusion of culture medium into the organoids. The vascularized organoids exhibit dimensional breaking growth and enhanced proliferation, reduced hypoxia and apoptosis, suggesting that the 3D-printed meshed vessels partially mimic vascular function to promote the culture of organoids. Furthermore, cortical, striatal and medial ganglionic eminence (MGE) organoids are respectively differentiated to generate Cortico-Striatal-MGE assembloids by 3D-printed vessels. The enhanced migration, projection and excitatory signaling transduction are observed between different brain regional organoids in the assembloids. This study presents an approach using TPP 3D printing to construct vascularized brain organoids and assembloids for enhancing the development and assembly, offering a research model and platform for neurological diseases.

Effect of Size Tuning of Hexagonal SnS2 Nanosheet on the Efficiency of Photocatalytic Degradation Processes.

Recent research on SnS2 materials aims to enhance their photocatalytic efficiency for water pollution remediation through doping and constructing heterojunctions. These methods face challenges in cost-effectiveness and practical scalability. This study synthesizes hexagonal SnS2 nanosheets of various sizes via a hydrothermal method, assessing their performance in degrading methyl orange (MO) and reducing hexavalent chromium (Cr(VI)). The results show that smaller SnS2 nanosheets exhibit higher photocatalytic efficiency under sunlight. Specifically, 50 mg of small-sized nanosheets degraded 100 ml of MO (10 mgL-1) in 30 min and reduced Cr(VI) (10 mgL-1) in 105 min. The enhanced performance is attributed to: i) an energy bandgap of 2.17 eV suitable for visible light, and ii) more surface sulfur (S) vacancies in smaller nanosheets, which create electronic states near the Fermi level, reducing electron-hole recombination. This study offers a straightforward strategy for improving 2D materials like SnS2.

Leaf rolling detection in maize under complex environments using an improved deep learning method.

Leaf rolling is a common adaptive response that plants have evolved to counteract the detrimental effects of various environmental stresses. Gaining insight into the mechanisms underlying leaf rolling alterations presents researchers with a unique opportunity to enhance stress tolerance in crops exhibiting leaf rolling, such as maize. In order to achieve a more profound understanding of leaf rolling, it is imperative to ascertain the occurrence and extent of this phenotype. While traditional manual leaf rolling detection is slow and laborious, research into high-throughput methods for detecting leaf rolling within our investigation scope remains limited. In this study, we present an approach for detecting leaf rolling in maize using the YOLOv8 model. Our method, LRD-YOLO, integrates two significant improvements: a Convolutional Block Attention Module to augment feature extraction capabilities, and a Deformable ConvNets v2 to enhance adaptability to changes in target shape and scale. Through experiments on a dataset encompassing severe occlusion, variations in leaf scale and shape, and complex background scenarios, our approach achieves an impressive mean average precision of 81.6%, surpassing current state-of-the-art methods. Furthermore, the LRD-YOLO model demands only 8.0 G floating point operations and the parameters of 3.48 M. We have proposed an innovative method for leaf rolling detection in maize, and experimental outcomes showcase the efficacy of LRD-YOLO in precisely detecting leaf rolling in complex scenarios while maintaining real-time inference speed.

Mo3P/Mo heterojunction for efficient conversion of lithium polysulfides in high-performance lithium-sulfur batteries.

Realizing efficient immobilization of lithium polysulfides (LiPSs) as well as reversible catalytic conversion between LiPSs and the insoluble Li2S is vital to restrain the shuttle effect, which requires highly reactive catalysts for high-performance Li-S batteries. Here, three-dimensional ordered porous Mo-based metal phosphides (3DOP Mo3P/Mo) with heterogeneous structures were fabricated and utilized as separator-modified coatings for Li-S batteries to catalyze the conversion of LiPSs. The adsorption, catalytic and electrochemical performance of the corresponding cells were compared among 3DOP Mo3P/Mo and 3DOP Mo, by kinetic and electrochemical performance measurements. It was found that the cell with 3DOP Mo3P/Mo modified separator deliver better electrochemical performance, with a high specific capacity of 469.66 mAh g-1 after 500 cycles at a high current density of 1°C. This work provides an idea and a guideline for the design of the separator modification for high-performance Li-S batteries.

Dynamic regulation of innate lymphoid cell development during ontogeny.

The helper-like ILC contains various functional subsets, such as ILC1, ILC2, ILC3 and LTi cells, mediating the immune responses against viruses, parasites, and extracellular bacteria, respectively. Among them, LTi cells are also crucial for the formation of peripheral lymphoid tissues, such as lymph nodes. Our research, along with others', indicates a high proportion of LTi cells in the fetal ILC pool, which significantly decreases after birth. Conversely, the proportion of non-LTi ILCs increases postnatally, corresponding to the need for LTi cells to mediate lymphoid tissue formation during fetal stages and other ILC subsets to combat diverse pathogen infections postnatally. However, the regulatory mechanism for this transition remains unclear. In this study, we observed a preference for fetal ILC progenitors to differentiate into LTi cells, while postnatal bone marrow ILC progenitors preferentially differentiate into non-LTi ILCs. Particularly, this differentiation shift occurs within the first week after birth in mice. Further analysis revealed that adult ILC progenitors exhibit stronger activation of the Notch signaling pathway compared to fetal counterparts, accompanied by elevated Gata3 expression and decreased Rorc expression, leading to a transition from fetal LTi cell-dominant states to adult non-LTi ILC-dominant states. This study suggests that the body can regulate ILC development by modulating the activation level of the Notch signaling pathway, thereby acquiring different ILC subsets to accommodate the varying demands within the body at different developmental stages.

Melon ripeness detection by an improved object detection algorithm for resource constrained environments.

BACKGROUND: Ripeness is a phenotype that significantly impacts the quality of fruits, constituting a crucial factor in the cultivation and harvesting processes. Manual detection methods and experimental analysis, however, are inefficient and costly. RESULTS: In this study, we propose a lightweight and efficient melon ripeness detection method, MRD-YOLO, based on an improved object detection algorithm. The method combines a lightweight backbone network, MobileNetV3, a design paradigm Slim-neck, and a Coordinate Attention mechanism. Additionally, we have created a large-scale melon dataset sourced from a greenhouse based on ripeness. This dataset contains common complexities encountered in the field environment, such as occlusions, overlapping, and varying light intensities. MRD-YOLO achieves a mean Average Precision of 97.4% on this dataset, achieving accurate and reliable melon ripeness detection. Moreover, the method demands only 4.8 G FLOPs and 2.06 M parameters, representing 58.5% and 68.4% of the baseline YOLOv8n model, respectively. It comprehensively outperforms existing methods in terms of balanced accuracy and computational efficiency. Furthermore, it maintains real-time inference capability in GPU environments and demonstrates exceptional inference speed in CPU environments. The lightweight design of MRD-YOLO is anticipated to be deployed in various resource constrained mobile and edge devices, such as picking robots. Particularly noteworthy is its performance when tested on two melon datasets obtained from the Roboflow platform, achieving a mean Average Precision of 85.9%. This underscores its excellent generalization ability on untrained data. CONCLUSIONS: This study presents an efficient method for melon ripeness detection, and the dataset utilized in this study, alongside the detection method, will provide a valuable reference for ripeness detection across various types of fruits.

Protocol for in vitro generating innate lymphoid cells from mouse α4ß7+ lymphoid progenitors.

Building a simple and efficient in vitro differentiation system is crucial for studying the regulatory mechanisms during the development of innate lymphoid cells (ILCs). Here, we present a protocol for generating ILC subsets from α4ß7+ lymphoid progenitors (αLPs). We describe steps for murine cell isolation from fetal liver and adult bone marrow, flow cytometry sorting for αLPs, and cell culture. We then detail procedures for flow cytometry analysis of ILCs. This protocol significantly simplifies the differentiation process through ILC differentiation in vitro. For complete details on the use and execution of this protocol, please refer to Wu et al.1.

Synergistic Regulation of Sodium Metal Deposition Pattern Through Three-Dimensional Sodiophilic Gradient ZnO/Fe0.7Co0.3 Frameworks and Magnetic Fields for High-Performance Sodium Metal Batteries.

The application of sodium metal battery is hampered by the large volume change and uncontrollable top growth of Na metal. Herein, a dual strategy including constructing a three-dimensional gradient ZnO/Fe0.7Co0.3 (ZFC) framework of decreasing sodiophilic capability from bottom to top, and imposing magnetic fields based on magnetohydrodynamic (MHD) effect, is proposed to regulate the sodium deposition/stripping behavior and realize the bottom-up deposition of Na. Therefore, the ZFC framework under a magnetic field of 200 mT exhibits high electrochemical reversibility with a Coulombic efficiency of 99.77 % at 1 mA cm-2 and 1 mAh cm-2. Meanwhile, the ZFC composite anode (ZFC@Na) with the magnetic field of 200 mT delivers a small polarization voltage of approximately10 mV and long cycle life of more than 2500 h at 5 mA cm-2 and 5 mAh cm-2 in symmetric cells, along with good cycle stability in ZFC@Na||Na3V2(PO4)3 full cells (200 cycles at 1 C with a high capacity retention of 98 %). Accordingly, the novel strategy of combining magnetic fields and sodiophilic gradient frameworks provides a perspective to solve the issues of sodium dendrite growth.

Mechanically Interlocked Polyrotaxane Networks with Collective Motions of Multiple Main-Chain Mechanical Bonds.

Type I main-chain polyrotaxanes (PRs) with multiple wheels threaded onto the axle are widely employed to design slide-ring materials. However, Type II main-chain PRs with axles threading into the macrocycles on the polymer backbones have rarely been studied, although they feature special topological structures and dynamic characteristics. Herein, we report the design and preparation of Type II main-chain PR-based mechanically interlocked networks (PRMINs), based on which the relationship between microscopic motion of mechanical bonds on the PRs and macroscopic mechanical performance of materials has been revealed. The representative PRMIN-2 exhibits a robust feature in tensile tests with high stretchability (1680 %) and toughness (47.5 MJ/m3). Moreover, it also has good puncture performance with puncture energy of 22.0 mJ. Detailed rheological measurements and coarse-grained molecular dynamics (CGMD) simulation reveal that the embedded multiple [2]rotaxane mechanical bonds on the PR backbones of PRMINs could undergo a synergistic long-range sliding motion under external force, with the introduction of collective dangling chains into the network. As a result, the synchronized motions of coherent PR chains can be readily activated to accommodate network deformation and efficiently dissipate energy, thereby leading to enhanced mechanical performances of PRMINs.

Pembrolizumab in combination with lenvatinib in participants with hepatocellular carcinoma (HCC) before liver transplant as neoadjuvant therapY-PLENTY pilot study.

BACKGROUND: The high recurrent rate after liver transplantation (LT) remains a clinical challenge, especially for those exceeding the Milan criteria (MC) and with high RETREAT scores. Therefore, the authors aim to investigate whether neoadjuvant systemic therapy allows safely administered and effectively reduces post-LT recurrence for those patients. METHODS: In this prospective, randomized, open-label, pilot study, patients with HCC exceeding the MC were randomly assigned to PLENTY or control group before LT. The primary endpoint of the study was the recurrence-free survival after LT. RESULTS: Twenty-two patients were enrolled and randomly assigned: 11 to the PLENYT group and 11 to the control group. The 30-month tumor-specific RFS was 37.5% in the PLENTY group and 12.5% in the control group. The 12-month tumor-specific RFS after LT was significantly improved in the PLENTY group (87.5%) compared to the control group (37.5%) (P=0·0022). The objective response rate in the PLENTY group was 30 and 60% when determined by RECIST 1.1 and mRECIST, respectively. Six patients (60%) had significant tumor necrosis, including three (30%) who had complete tumor necrosis at histopathology. No acute allograft rejection after LT occurred in the PLENTY and Control group. CONCLUSION: Neoadjuvant pembrolizumab plus lenvatinib before LT appears to be safe and feasible, associated with significantly better RFS for patients exceeding the MC. Despite the limitations of small sample size, this is the first RCT to evaluate neoadjuvant PD-1 blockade combined with tyrosine kinase inhibitors in LT recipients, the results of this study will inform future research.

A Facile Strategy for Constructing High-Performance Polymer Electrolytes via Anion Modification and Click Chemistry for Rechargeable Magnesium Batteries.

Polymer electrolytes play a crucial role in advancing rechargeable magnesium batteries (RMBs) owing to their exceptional characteristics, including high flexibility, superior interface compatibility, broad electrochemical stability window, and enhanced safety features. Despite these advantages, research in this domain remains nascent, plagued by single preparation approaches and challenges associated with the compatibility between polymer electrolytes and Mg metal anode. In this study, we present a novel synthesis strategy to fabricate a glycerol α,α'-diallyl ether-3,6-dioxa-1,8-octanedithiol-based composite gel polymer electrolyte supported by glass fiber substrate (GDT@GF CGPE) through anion modification and thiol-ene click chemistry polymerization. The developed route exhibits novelty and high efficiency, leading to the production of GDT@GF CGPEs featuring exceptional mechanical properties, heightened ionic conductivity, elevated Mg2+ transference number, and commendable compatibility with Mg anode. The assembled modified Mo6S8||GDT@GF||Mg cells exhibit outstanding performance across a wide temperature range and address critical safety concerns, showcasing the potential for applications under extreme conditions. Our innovative preparation strategy offers a promising avenue for the advancement of polymer electrolytes in high-performance rechargeable magnesium batteries, while also opens up possibilities for future large-scale applications and the development of flexible electronic devices.

A Simple and Efficient Magnesium Hydroxide Modification Strategy for Flame-Retardancy Epoxy Resin.

Magnesium hydroxide, as a green inorganic flame-retardancy additive, has been widely used in polymer flame retardancy. However, magnesium hydroxide is difficult to disperse with epoxy resin (EP), and its flame-retardancy performance is poor, so it is difficult to use in flame-retardant epoxy resin. In this study, an efficient magnesium hydroxide-based flame retardant (MH@PPAC) was prepared by surface modification of 2-(diphenyl phosphine) benzoic acid (PPAC) using a simple method. The effect of MH@PPAC on the flame-retardancy properties for epoxy resins was investigated, and the flame-retardancy mechanism was studied. The results show that 5 wt% MH@PPAC can increase the limiting oxygen index for EP from 24.1% to 38.9%, achieving a V-0 rating. At the same time, compared to EP, the peak heat release rate, peak smoke production rate, total smoke production rate, and peak CO generation rate for EP/5 wt% MH@PPAC composite material decreased by 53%, 45%, 51.85%, and 53.13% respectively. The cooperative effect for PPAC and MH promotes the formation of a continuous and dense char layer during the combustion process for the EP-blend material, significantly reducing the exchange for heat and combustible gases, and effectively hindering the combustion process. Additionally, the surface modification of PPAC enhances the dispersion of MH in the EP matrix, endowing EP with superior mechanical properties that meet practical application requirements, thereby expanding the application scope for flame-retardant EP-blend materials.

Layered BaV6O16·3H2O@GO as a high performance cathode material for calcium ion batteries.

The lack of suitable cathode materials has hampered the further development of calcium-ion batteries (CIBs). A novel composite cathode material, namely BaV6O16·3H2O@GO, was fabricated, which delivers a high specific capacity of 285.72 mA h g-1 at 50 mA g-1 after 50 cycles and a long cycle life, benefiting from a large layer spacing and robust structure. This study provides guidance for the development of vanadium-based cathode materials for CIBs.

Construction of biodegradable superhydrophilic/underwater superoleophobic materials with CNF (cellulose nanofiber) fence-like attached on the surface for efficient oil/water emulsion separation.

Superhydrophilic/underwater superoleophobic materials for the separation of oil-water emulsions by filtration have received much attention in order to solve the pollution problem of oil-water emulsion. In this paper, a fence-like structure on the surface of CNF/KGM (Konjac Glucomannan) materials by a simple method using CNF instead of metal nanowires was successfully developed based on the hydrogen bonding of KGM and CNF. The resulted organic CNF/KGM materials surface has outstanding superhydrophilic (WCA = 0°) in air and superoleophobicity (OCA≥151°) in water, which could separate oil-water mixtures with high separation efficiency above 99.14 % under the pressure of the emulsion itself. The material shows good mechanical properties because of the addition of CNF and has outstanding anti-fouling property and reusability. More importantly, the material can be completely biodegraded after buried in soil for 4 weeks since both of KGM and CNF are organic substances. Therefore, it may have a broad application prospect in the separation of oil-water emulsion because of its outstanding separation properties, simply preparation method and biodegradability.

Activation of BMP4/SMAD pathway by HIF-1α in hypoxic environment promotes osteogenic differentiation of BMSCs and leads to ectopic bone formation.

OBJECTIVE: Heterotopic ossification (HO), also known as ossifying myositis, is a condition that produces abnormal bone and cartilage tissue in the soft tissues. Hypoxia inducible factor lα (HIF-lα) regulates the expression of various genes, which is closely related to the promotion of bone formation, and Drosophila mothers against decapentaplegic protein (SMAD) mediates the signal transduction in the Bone morphogenetic protein (BMP) signaling pathway, which affects the function of osteoblasts and osteoclasts, and thus plays a key role in the regulation of bone remodeling. We aimed to investigate the mechanism by which HIF-1α induces osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) in a hypoxic environment. METHODS: A cellular hypoxia model was constructed to verify the expression of HIF-1α, while alizarin red staining was performed to observe the osteogenic differentiation ability of bone marrow mesenchymal stem cells (BMSCs). Alizarin red staining was used to analyze the late mineralization ability of the cells. Western blot analysis was performed to analyze the expression levels of osteogenesis-related factors OCN, OPN proteins as well as the pathway proteins BMP4, p-Smad1/5/8, and Smad1. We also constructed a rat model of ectopic bone formation, observed ectopic ossification by X-ray, and verified the success of the rat model by ELISA of HIF-1α. HE staining was used to observe the matrix and trabecular structure of bone, and Masson staining was used to observe the collagen and trabecular structure of bone. Immunohistochemistry analyzed the expression of OCN and OPN in ectopic bone tissues, and WB analyzed the expression of pathway proteins BMP4, p-Smad1/5/8 and Smad1 in ectopic bone tissues to verify the signaling pathway of ectopic bone formation. RESULTS: Our results indicate that hypoxic environment upregulates HIF-1a expression and activates BMP4/SMAD signaling pathway. This led to an increase in ALP content and enhanced expression of the osteogenesis-related factors OCN and OPN, resulting in enhanced osteogenic differentiation of BMSCs. The results of our in vivo experiments showed that rats inoculated with BMSCs overexpressing HIF-1α showed bony structures in tendon tissues, enhanced expression of the bone signaling pathways BMP4 and p-Smad1/5/8, and enhanced expression levels of the osteogenic-related factors OCN and OPN, resulting in the formation of ectopic bone. CONCLUSIONS: These data further suggest a novel mechanistic view that hypoxic bone marrow BMSCs activate the BMP4/SMAD pathway by up-regulating the expression level of HIF-1α, thereby promoting the secretion of osteogenic factors leading to ectopic bone formation.

Perfluoroalkyl sulfonate induces cardiomyocyte apoptosis via endoplasmic reticulum stress activation and autophagy flux inhibition.

Perfluoroalkyl sulfonate (PFOS) is a commonly used chemical compound that often found in materials such as waterproofing agents, food packaging, and fire retardants. Known for its stability and persistence in the environment, PFOS can enter the human body through various pathways, including water and the food chain, raising concerns about its potential harm to human health. Previous studies have suggested a cardiac toxicity of PFOS, but the specific cellular mechanisms remained unclear. Here, by using AC16 cardiomyocyte as a model to investigate the molecular mechanisms potential the cardiac toxicity of PFOS. Our findings revealed that PFOS exposure reduced cell viability and induces apoptosis in human cardiomyocyte. Proteomic analysis and molecular biological techniques showed that the Endoplasmic Reticulum (ER) stress-related pathways were activated, while the cellular autophagy flux was inhibited in PFOS-exposed cells. Subsequently, we employed strategies such as autophagy activation and ER stress inhibition to alleviate the PFOS-induced apoptosis in AC16 cells. These results collectively suggest that PFOS-induced ER stress activation and autophagy flux inhibition contribute to cardiomyocyte apoptosis, providing new insights into the mechanisms of PFOS-induced cardiomyocyte toxicity.

TBC1D23 mediates Golgi-specific LKB1 signaling.

Liver kinase B1 (LKB1), an evolutionarily conserved serine/threonine kinase, is a master regulator of the AMPK subfamily and controls cellular events such as polarity, proliferation, and energy homeostasis. Functions and mechanisms of the LKB1-AMPK axis at specific subcellular compartments, such as lysosome and mitochondria, have been established. AMPK is known to be activated at the Golgi; however, functions and regulatory mechanisms of the LKB1-AMPK axis at the Golgi apparatus remain elusive. Here, we show that TBC1D23, a Golgi-localized protein that is frequently mutated in the neurodevelopment disorder pontocerebellar hypoplasia (PCH), is specifically required for the LKB1 signaling at the Golgi. TBC1D23 directly interacts with LKB1 and recruits LKB1 to Golgi, promoting Golgi-specific activation of AMPK upon energy stress. Notably, Golgi-targeted expression of LKB1 rescues TBC1D23 deficiency in zebrafish models. Furthermore, the loss of LKB1 causes neurodevelopmental abnormalities in zebrafish, which partially recapitulates defects in TBC1D23-deficient zebrafish, and LKB1 sustains normal neuronal development via TBC1D23 interaction. Our study uncovers a regulatory mechanism of the LKB1 signaling, and reveals that a disrupted Golgi-LKB1 signaling underlies the pathogenesis of PCH.

Exosome MiR-21-5p Upregulated by HIF-1α Induces Adipose Stem Cell Differentiation to Promote Ectopic Bone Formation.

Heterotopic bone occurs after burns, trauma and major orthopedic surgery, which cannot be completely cured by current treatments. The development of new treatments requires more in-depth research into the mechanism of HO. Available evidence suggests that miR-21-5p plays an important role in bone formation. However, its mechanism in traumatic HO is still unclear. First, we identified exosomes extracted from L6 cells using TEM observation of the structure and western blotting detection of the surface marker CD63. Regulation effect of HIF-1α to miR-21-5p was confirmed by q-PCR assay. Then we co-cultured L6 cells with ASCs and performed alizarin red staining and ALP detection. Overexpression of miR-21-5p upregulated BMP4, p-smad1/5/8, OCN and OPN, which suggests the BMP4-smad signaling pathway may be involved in miR-21-5p regulation of osteogenic differentiation of ASCs. Finally in vivo experiments showed that miR-21-5p exosomes promoted ectopic formation in traumatized mice. This study confirms that HIF-1α could modulate miR-21-5p exosomes to promote post-traumatic ectopic bone formation by inducing ASCs cell differentiation. Our study reveals the mechanisms of miR-21-5p in ectopic ossification formation after trauma.

Bidirectional enhancement of Li2S redox reaction by NiSe2/CoSe2-rGO heterostructured bi-functional catalysts.

The high activity barriers of Li2S nucleation and deposition limit the redox reaction kinetics of lithium polysulfides (LiPSs), meanwhile, the significant shuttle effect of LiPSs hampers the advancement of Li-S batteries (LSBs). In this work, a NiSe2/CoSe2-rGO (NiSe2/CoSe2-G) sulfur host with bifunctional catalytic activity was prepared through a hard template method. Electrochemical experiment results confirm that the combination of NiSe2 and CoSe2 not only facilitates the bidirectional catalytic function during charge and discharge processes, but also increases the active sites toward LiPSs adsorption. Simultaneously, the highly conductive rGO network enhances the electronic conductivity of NiSe2/CoSe2-G/S and provides convenience for loading NiSe2/CoSe2 catalysts. Benefitting from the exceptional catalytic-adsorption capability of NiSe2/CoSe2 and the presence of rGO, the NiSe2/CoSe2-G/S electrode exhibits excellent electrochemical properties. At 1C, it demonstrates a low capacity attenuation of 0.087 % per cycle during 500 cycles. The electrode can maintain a discharge capacity of 927 mAh/g at a sulfur loading of 3.3 mg cm-2. The bidirectional catalytic activity of NiSe2/CoSe2-G offers a prospective approach to expedite the redox reactions of active S, meanwhile, this work also offers an ideal approach for designing efficient S hosts for LSBs.