ABSTRACT
Porphyrins are attracting increasing attention in materials science and photochemistry owing to their unique properties and diverse applications. This study focuses on modifying and tuning the absorption properties of porphyrins, specifically those of quinoidal porphyrins, to extend their spectral range into the near-infrared (NIR) region. We report the synthesis and structural and physical properties of quinone compounds derived from doubly and triply linked diporphyrins and their metal complexes. Doubly linked diporphyrinquinone exhibits broad panchromatic absorption properties in solution owing to its low symmetry. Metal complexation markedly extends its absorption range into the near-infrared region. In contrast, the metal complexes of the triply linked diporphyrinquinones exhibit sharp and strong absorption bands in the visible to near-infrared region owing to their higher symmetry. The longest absorption wavelength of the triply linked diporphyrinquinones was approximately 1500â nm, which was significantly more red-shifted than that of the doubly linked ones.
ABSTRACT
For practical application of perovskite photovoltaic devices, it is vital to choose an appropriate carrier extraction material with high mobility, high conductivity, and appropriate molecular energy levels. One of the most frequently used hole transport materials, spiro-OMeTAD, is known to show an improvement in its electrical properties after the oxidation reaction. However, this oxidation reaction is generally accomplished by simple atmospheric exposure, often taking one or more nights under atmospheric conditions, and thus the development of a rapid oxidation strategy without the degradation of device performance is strongly required. Here, we propose a rapid and reproducible oxidation route employing a UV ozone treatment process that enables quick oxidation of spiro-OMeTAD in solution, as short as 30 seconds. Optical and electrical characterization reveals that this method modifies the highest occupied molecular orbital energy level of spiro-OMeTAD to reduce the voltage loss, and also improves the conductivity and mobility, leading to the enhancement in the photovoltaic properties. This finding will provide useful insights into the further development of spiro-OMeTAD-based perovskite solar cell devices.
ABSTRACT
Polyaniline, which is formed by the oxidative polymerization of aniline, is a widely explored conducting polymer with several stable oxidation states, and can be applied in advanced materials, including sensing devices and electrochemical catalysts. The marriage of polyanilines with the diverse chemistry of porphyrins is expected to confer new properties, including a combination of electrical, optical, magnetic and chemical properties. Herein, we demonstrate that meso-aminodiarylporphyrin, a porphyrin analogue of aniline, undergoes oxidative oligomerization in an acidic solution under an oxygen atmosphere to yield stable oligomeric products that are analogous to fully oxidized polyanilines. The so-formed oligomers are composed of the same number of electron-rich porphyrinoid and electron-deficient quinoid moieties, and they exhibit a broad electronic absorption band in the near infrared (NIR) region, which is attributable to intramolecular charge transfer (ICT) transition from electron-rich porphyrinoid moieties to electron-deficient quinoid ones. The quinoid moieties in the oligomers could be reversibly reduced using sodium ascorbate to obtain all-porphyrinoid oligomers that resemble fully reduced polyanilines. The fully reduced oligomers do not exhibit the NIR ICT band. Furthermore, three types of partially reduced tetramers consisting of a single quinoid moiety were also obtained, among which two interconverted in solution. Their interconversion was significantly accelerated in the presence of a protic solvent. This result is consistent with the high electron conductivity of partially oxidized polyanilines following their protonation.
ABSTRACT
Phase-separation multiphase flow at a liquid-liquid interface was successfully formed in an aqueous two-phase system of polyethylene glycol/phosphate mixed solutions when fed into a microchannel (100 µm wide and 40 µm deep) on a microchip and a fused-silica capillary tube (100 µm ID). As one example, tube radial distribution flow (annular flow) was observed when 10.0 wt% polyethylene glycol 6000 and 8.5 wt% dipotassium hydrogen phosphate aqueous solution containing 1.0 mM Rhodamine B was fed at 40 â, recorded by bright field microscopy. It exhibited a dipotassium hydrogen phosphate-rich inner phase and polyethylene glycol-rich outer phase. Effects of conditions including composition, flow rate, viscosity, and contact angle on tube radial distribution flow were analyzed. It was found out that although the viscosity of PEG-rich solution was much higher than that of phosphate-rich one, the phase configuration in tube radial distribution flow did not necessarily obey the viscous dissipation law in untreated microchannel and capillary tube, as well as for all the types of PEG/phosphate mixed solution the PEG-rich solution occupied the outer phase near the ODS-treated inner wall of both microchannel and capillary tube against the law. To assess the use of microfluidic flow in applications, we examined the distribution of red blood cells in the inner and outer phases fed into double capillary tubes with different inner diameters. Cell distribution was found to concentrate in the inner (dipotassium hydrogen phosphate-rich) phase compared to the outer (polyethylene glycol-rich) phase at a ratio of 1.8.
Subject(s)
Polyethylene Glycols , Water , Solvents/chemistry , Water/chemistry , Polyethylene Glycols/chemistry , Phosphates , ErythrocytesABSTRACT
When ternary mixed solutions of water/acetonitrile/ethyl acetate are delivered into a microspace under laminar flow conditions, the solvent molecules show specific microfluidic flows, such as microfluidic inverted flow and tube radial distribution flow, which have been applied to novel analytical methods. In this paper, inverted flow was examined using various Y-type microchannels that had mixing angles of 0°, 90°, 180°, and 270°. Inverted flow was experimentally observed and the trigger phenomenon was also successfully expressed through computer simulations. Tube radial distribution flow, that is, annular flow, in a capillary tube is reported to cause exchange of the inner and outer phases based on the solvent composition of the ternary mixed solution. Tube radial distribution flow for an organic solvent-rich inner and a water-rich outer phases, as well as for a water-rich inner and an organic solvent-rich outer phases, could be well recreated by computer simulations for a ternary mixed solution. This highlights the effectiveness of computer simulations for such flow scenarios and will allow optimization of the operating conditions and design of microfluidic analytical devices.
Subject(s)
Microfluidics , Water , Acetates , Acetonitriles , Computer Simulation , Solvents/chemistry , Water/chemistryABSTRACT
Lead-halide perovskites are highly promising for various optoelectronic applications, including laser devices. However, fundamental photophysics explaining the coherent-light emission from this material system is so intricate and often the subject of debate. Here, we systematically investigate photoluminescence properties of all-inorganic perovskite microcavity at room temperature and discuss the excited state and the light-matter coupling regime depending on excitation density. Angle-resolved photoluminescence clearly exhibits that the microcavity system shows a transition from weak coupling regime to strong coupling regime, revealing the increase in correlated electron-hole pairs. With pumping fluence above the threshold, the photoluminescence signal shows a lasing behavior with bosonic condensation characteristics, accompanied by long-range phase coherence. The excitation density required for the lasing behavior, however, is found to exceed the Mott density, excluding the exciton as the excited state. These results demonstrate that the polaritonic Bardeen-Cooper-Schrieffer state originates the strong coupling formation and the lasing behavior.
ABSTRACT
In this study, we examined the effects of calyculin A, a phosphatase inhibitor, on motility, protein phosphorylation, and the distribution of phospho-(Ser/Thr) PKA substrates in frozen-thawed bull spermatozoa that are actually used by most farmers for breeding. The data showed that calyculin A, which has been reported to have a positive effect on the motility of ejaculated fresh spermatozoa, distinctly decreased the motility of frozen-thawed bull spermatozoa even if a cell activator, such as caffeine, was present in the incubation medium and that the suppressive effect of calyculin A was dose-dependent and continued for at least 200 min. Immunoblot analyses revealed that de novo protein phosphorylation was not detected in spermatozoa exposed to caffeine or dbcAMP (a cell-permeable cAMP analog), while the addition of calyculin A to the medium brought about the appearance of several phosphorylated proteins at 50 kDa and 75 kDa, suggesting that 50 kDa and 75 kDa proteins, which were phosphorylated by activation of cAMP-dependent PKA, were not dephosphorylated and were accumulated in spermatozoa due to the suppression of calyculin A-sensitive protein phosphatases. Immunofluorescence microscopy revealed that calyculin A caused, alone or in conjunction with caffeine or dbcAMP, the accumulation of phospho-PKA substrates at the annulus, although caffeine or dbcAMP alone did not. This study suggested that calyculin A decreases the motility of frozen-thawed bull spermatozoa concomitant with the accumulation of phospho-(Ser/Thr) PKA substrates at the annulus of flagella.
Subject(s)
Cyclic AMP , Sperm Motility , Animals , Cattle , Cryopreservation , Cyclic AMP/metabolism , Male , Marine Toxins , Oxazoles , Phosphorylation , SpermatozoaABSTRACT
Organic semiconductors are promising candidates as platforms for room temperature polaritonic devices. An issue for practical implementation of organic polariton devices is the lowering of condensation threshold. Here we investigate anisotropic light-matter coupling characteristics in an organic crystal microcavity showing strong molecular orientation. Furthermore, the below-threshold excitation dynamics are investigated to clarify the spontaneous transition pathways from reservoir to polariton states. Time-resolved photoluminescence measurements reveal that photonic/excitonic hybrid transition processes coexist in the microcavity system. This finding provides valuable insights into a detailed understanding of polariton dynamics and help in the design of polaritonic devices showing a low-threshold condensed phase.
ABSTRACT
Microwave transmission measurements were performed for a three-dimensional (3D) layer-by-layer chiral photonic crystal (PhC), whose photonic band structure contains 3D singular points, Weyl points. For the frequency and wavevector in the vicinity of a Weyl point, the transmitted intensity was found to be inversely proportional to the square of the propagation length. In addition, the transmitted wave was well-collimated in the plane parallel to the PhC layers, even for point-source incidence. When a plane wave was incident on the PhC containing metal scatters, the planar wavefront was reconstructed after the transmission, indicating a cloaking effect.
ABSTRACT
Tube radial distribution chromatography based on the tube radial distribution flow, or annular flow, in an open-tubular capillary has been reported, where the annular flow is created through phase-separation multiphase flow. We have proposed the first-ever procedure for consecutive sample injection analysis using chromatography. In basic terms, a commercially available HPLC system could be used with a sample injector (0.2 µL volume) and a fused-silica capillary tube (250 cm long) as a separation column instead of a normal packed one, while the built-in detection cell was replaced by improved on-capillary detection. A ternary mixed solution of water/acetonitrile/ethyl acetate (3:8:4 volume ratio) was delivered into the capillary tube as an eluent at a flow rate of 2.0 µL min-1. Model sample solutions of 1-naphthol and 2,6-naphthalenedisulfonic acid were consecutively analyzed by the present chromatography with a processing rate of 6 samples per hour. Simple and rapid consecutive analysis could be performed because washing and initialization of the separation tube was no longer necessary. The obtained results provide clues to developing new methodologies which combine features of both chromatography (separation) and the flow injection method (consecutive analysis).
ABSTRACT
The magnetic circularly polarized luminescence (MCPL) and photoluminescence (PL) spectra of achiral (2,3,7,8,12,13,17,18-octaethylporphyrinato)platinum(II), PtOEP, and [2-(4',6'-difluorophenyl)pyridinato-N,C2' ]platinum(II) acetylacetonate-O,O, F2 -ppyPt(acac), in toluene and dichloromethane solutions were recorded under an external magnetic field of 1.6â T with N-up and S-up Faraday geometries. The MCPL signs of PtOEP and F2 -ppyPt(acac) were controlled solely by changing the N-up and S-up geometries. The MCPL/PL wavelengths of F2 -ppyPt(acac) in solutions were varied by the ratio of the monomeric and excimeric species.
ABSTRACT
BACKGROUND: The isolation and characterization of sperm subpopulations that can achieve fertilization is a major challenge of assisted reproduction methods. We focused on the microfluidic sperm sorter as a novel tool for collecting highly motile spermatozoa from heterogeneous semen samples. OBJECTIVES: This study primarily aims to obtain baseline information on sorted spermatozoa according to its characteristics and in vitro life span. MATERIALS AND METHODS: Frozen-thawed bull semen was subjected to microfluidic sperm sorting using diffuser-type microfluidic sperm sorter (DMSS). After sorting, samples were collected as the sorted spermatozoa and unsorted residual spermatozoa and incubated at 37°C for subsequent evaluation. The samples were assessed at different time points (0 or 1, 6, and 24 h) in terms of motility, which was measured by computer-assisted sperm analysis (CASA), membrane integrity, mitochondrial function, and adenosine triphosphate (ATP) production after sorting (0 h). To determine the characteristics and efficiency of DMSS sorting, the sorted spermatozoa were compared with samples collected using the swim-up method, a conventional method in motile sperm selection. RESULTS: A comparison between the sorted and residual spermatozoa demonstrated significantly higher motility parameters, membrane integrity, and mitochondrial function of the sorted spermatozoa until 6 h after incubation. The time course decrement of membrane and mitochondrial status were subjected to curve fitting and theoretically supported. Sperm ATP production measured immediately after sorting showed higher ATP generation of the sorted spermatozoa compared with the unsorted, frozen-thawed spermatozoa. The motility parameters and mitochondrial activity of DMSS-sorted spermatozoa were higher than the swim-up-collected spermatozoa (p < 0.05). DISCUSSION AND CONCLUSION: These results indicate that DMSS sorting can strictly select highly motile spermatozoa with the ability to maintain its membrane integrity and mitochondrial function related to ATP production. We speculate that the device that is able to sort high-quality spermatozoa can have great potential in assisted reproduction.
Subject(s)
Lab-On-A-Chip Devices , Microfluidic Analytical Techniques , Sperm Motility , Spermatozoa/physiology , Adenosine Triphosphate/metabolism , Animals , Cattle , Male , Mitochondria/metabolismABSTRACT
Treatment of a meso-diarylporphyrin with PhI(OAc)2 in the presence of BF3 â OEt2 and propionic acid affords the corresponding porphyrinquinone in a high yield (91%). A novel quinone derived from meso-meso ß-ß doubly-fused diporphyrin was obtained as the sole byproduct (16% yield), which exhibits strong panchromatic absorption between 300 and 1000â nm. It has a low HOMO-LUMO gap owing to expanded and low-symmetry π-planes.
ABSTRACT
Facile redox-induced aromatic-antiaromatic interconversions were accomplished by using ß-tetracyano-21,23-dithiaporphyrin (CN4 S2 Por). Introduced cyano groups not only increased the reduction potential of the porphyrin core but also stabilized the antiaromatic isophlorin (CN4 S2 Iph) by π conjugation. The reduction of CN4 S2 Por with hydrazine in polar solvents quantitatively affords CN4 S2 Iph, even under ambient conditions. CN4 S2 Iph retains a nearly planar conformation and exhibits considerable antiaromaticity. Aerobic oxidation of CN4 S2 Iph to CN4 S2 Por occurs in nonpolar solvents. This study was conducted to contribute to the understanding of the structure-antiaromaticity relationship.
ABSTRACT
An organic dye-doped polymer laser with a novel wavelength-tuning mechanism is proposed. This device is a vertical cavity surface-emitting laser realized by using a couple of distributed Bragg reflectors (DBRs), on which a dye-doped polymer thin film and a polydimethylsiloxane film are deposited individually. One of the DBRs is electrically driven to vary the effective cavity length. Under the optical excitation, tunable lasing operation with high stability can be achieved when immersion oil is used for the refractive index matching in the cavity. Since the device operation mechanism proposed here is quite simple, it is promising for designing a compact laser device with wide, precise, and electrically driven wavelength tunability.
ABSTRACT
BACKGROUND: The application of cryopreservation and artificial insemination technology have contributed to the advancement of animal reproduction. However, a substantial proportion of spermatozoa undergoes alterations and loses their fertility during cryopreservation, rendering the frozen-thawed semen impractical for routine use. Cryopreservation is known to reduce sperm lifespan and fertility. Variation in cryosurvival of spermatozoa from different sires and even with the individual sire is common in artificial insemination (AI) centers. Our goal is to improve post-thawed semen quality by optimization of cryopreservation technique through sperm selection prior to cryopreservation process. RESULTS: Our strategy of sperm selection based on rheotaxis and thermotaxis (SSRT) on macrosale in a rotating fluid flow demonstrated the ability to maintain the original pre-freezing structural integrity, viability and biological function related to fertilization competence. This strategy has a positive effect on the cryosurvival and fertilizing abilities of spermatozoa as supported by the improvement on pregnancy rate of Japanese Black heifers and Holstein repeat breeders. This technique protected further sublethal damage to bovine spermatozoa (higher % cryosurvival than the control) and resulted in the improvement of DNA integrity. Prefreeze selected spermatozoa demonstrated slower and controlled capacitation than unprocessed control which is thought to be related to sperm longevity and consequently to appropriate timing during in vivo fertilization. CONCLUSIONS: These results provide solid evidence that improvement of post-thawed semen quality by SSRT method is beneficial in terms of cryosurvival, longevity of post-thawed sperm, and optimization of in vivo fertilization, embryo development and calving as supported by the favorable results of field fertility study.
ABSTRACT
A polyethylene glycol/citrate mixed solution was fed into a single channel of a Y-type micro-channel on a microchip as an aqueous two-phase system. A phase separation multi-phase flow with a liquid-liquid interface was generated due to a phase transformation. An annular flow, one of the flow types in the phase separation multi-phase flow, was observed through bright-field microscopy. The flow consisted of citrate-rich inner and polyethylene glycol-rich outer phases. We attempted to separate and collect the two phases in the single channel into two separate Y-type channels. When the pressure losses for the separated channels were not very different, we observed symmetric flow in the Y-type channel. When the pressure losses were quite different, the polyethylene glycol-rich phase with higher viscosity was selectively distributed to the separated channel with lower pressure loss. Thus, the polyethylene glycol-rich phase was successfully and intentionally collected from the chosen Y-type channel via the creation of annular flow in the single channel.
ABSTRACT
A tube radial distribution chromatography (TRDC) method based on phase-separated multiphase flow created through phase transformation via temperature change has been developed. These systems typically required a temperature-controlling device containing a water bath and a stirrer. Herein, we proposed a novel TRDC system without a cooling device, where the phase transformation was achieved via pressure loss in a capillary tube of 50 µm inner diameter and 550 cm length. Model analytes were successfully separated with the developed TRDC system, which provided a simplified platform and helped to clarify the operating principle of TRDC based on phase transformation in a capillary tube.
ABSTRACT
Dinuclear rare-earth (TbIII , YIII ) triple-decker complexes with a fused diporphyrin (FP) and two tetraphenylporphyrin (TPP) ligands were synthesized in neutral, dianionic, and diprotonated forms. The neutral forms have large open shell biradical character, as determined from the temperature dependency of the magnetic susceptibility measurements and theoretical calculations. The coupling value (J=-1.4â kcal mol-1 , -487â cm-1 ) of the radical centers in the neutral form of the YIII complex indicates weak pairing interactions. Theoretical calculations on the neutral form reveal a significant biradical character (y=68 %). Furthermore, the TbIII complex exhibits multi-redox states, having more than eight clear peaks in the voltammetry curves. The optical (3700â nm, 0.33â eV) and electrochemical measurements (3400â nm, 0.36â eV) indicate that the neutral form has very small HOMO-LUMO energy gap. Despite the large biradical character, the neutral complexes are thermally stable and do not decompose on heating at 120 °C. These complexes with unique characteristics are promising candidates for use in molecular electronics, optics, and spintronics.
ABSTRACT
Two solutions that are individually fed at the same flow rate into two separate microchannels of a microchip, combine to form a single channel (a Y-type microchannel). This flow is either parallel for immiscible solutions or initially parallel, but then becomes homogeneous through diffusion, for miscible solutions. However, a new type of microfluidic behavior in a Y-type microchannel that was neither parallel nor homogeneous flow has been observed using, for example, water/acetonitrile (3:4.5, v/v) and acetonitrile/ethyl acetate (3.5:4, v/v) mixed solutions. Each mixed solution was marked with distinctive dyes and delivered at the same flow rate into a Y-type microchannel under laminar flow conditions. In the single channel, the two phases were initially observed to flow in parallel, but then apparently swapped to flow on the opposite wall while retaining parallel flow with a slight change in the components of the two phases. We have named this type of laminar flow "microfluidic inverted flow" for ternary water/hydrophilic/hydrophobic organic solvent mixed solutions. The inverted flow of a ternary water/acetonitrile/ethyl acetate system was examined in detail under various flow conditions. We also proposed a concept of response microfluidic analysis based on such microfluidic inverted flow.