ABSTRACT
N6-methyladenosine (m6A) is a prevalent internal post-transcriptional modification in eukaryotic RNAs, and its function is executed by m6A-binding proteins known as "readers". Our previous research revealed that the Arabidopsis m6A reader ECT2 positively regulates transcript levels of proteasome regulator PTRE1 and several 20S proteasome subunits, enhancing 26S proteasome activity. However, the mechanism of selective recognition of m6A targets by these readers like ECT2 remains unclear. In this study, we further demonstrate that ECT2 physically interacts with PTRE1 and several 20S proteasome subunits. This interaction occurs on the ribosome and involves the N-terminus of PTRE1, suggesting that ECT2 might bind to the nascent PTRE1 polypeptide. Deletion of ECT2's protein interaction domain impairs its ability to bind mRNA, while mutations in the m6A RNA binding site do not affect such protein-protein interaction. Furthermore, introducing a novel protein-binding domain into ECT2 elevates transcript levels of the proteins interacting with this domain. Our findings suggest that interaction with PTRE1 protein enhances ECT2's binding to PTRE1 m6A mRNAs during translation, thereby regulating PTRE1 mRNA levels.
ABSTRACT
Commercial perfume microcapsules are becoming popular across the globe to fulfill consumers' demands. However, most of microcapsules rely on synthetic polymers and/or animal-sourced ingredients to form the shells. Therefore, replacement of the shell materials is imperative to minimize environmental microplastic pollution, as well as to meeting peoples' needs, religious beliefs, and lifestyles. Herein, we report a methodology to fabricate environmentally benign dual-shell (fungal chitosan-SiO2) microcapsules laden with fragrance oil (hexyl salicylate). Anionically stabilized oil droplets were coated with fungal chitosan via interfacial electrostatic interactions at pH 2, which were then covered by an inorganic coating of SiO2 produced via external alkaline mineralization of sodium silicate. Core-shell microcapsules with a spherical morphology were achieved. Under compression, dual-shell chitosan-SiO2 microcapsules yielded a mean nominal rupture stress of 3.0 ± 0.2 MPa, which was significantly higher than that of single-shell microcapsules (1.7 ± 0.2 MPa). After 20 days in neutral pH water, only â¼2.5% of the oil was released from dual-shell microcapsules, while single-shell microcapsules cumulatively released more than 10%. These findings showed that the additional SiO2 coating significantly enhanced both mechanical and barrier properties of microcapsules, which may be appealing for multiple commercial applications, including cosmetics and detergents.
ABSTRACT
Encapsulation technology is well established for entrapping active ingredients within an outer shell for their protection and controlled release. However, many solutions employed industrially use nondegradable cross-linked synthetic polymers for shell formation. To curb rising microplastic pollution, regulatory policies are forcing industries to substitute the use of such intentionally added microplastics with environmentally friendly alternatives. This work demonstrates a one-pot process to make microplastic-free microcapsules using supramolecular self-assembly of bis-ureas. Molecular bis-urea species generated in-situ spontaneously self-assemble at the interface of an oil-in-water emulsion via hydrogen bonding to form a shell held together by noncovalent bonds. In addition, Laponite nanodiscs were introduced in the formulation to restrict aggregation observed during the self-assembly and to reduce the porosity of the shell, leading to well-dispersed microcapsules (mean Sauter diameter d [3,2] â¼ 5 µm) with high encapsulation efficiency (â¼99%). Accelerated release tests revealed an increase in characteristic release time of the active by more than an order of magnitude after encapsulation. The mechanical strength parameters of these capsules were comparable to some of the commercial, nondegradable melamine-formaldehyde microcapsules. With mild operating conditions in an aqueous environment, this technology has real potential to offer an industrially viable method for producing microplastic-free microcapsules.
ABSTRACT
Microencapsulation is an advanced methodology for the protection, preservation, and/or delivery of active materials in a wide range of industrial sectors, such as pharmaceuticals, cosmetics, fragrances, paints, coatings, detergents, food products, and agrochemicals. Polymeric materials have been extensively used as microcapsule shells to provide appropriate barrier properties to achieve controlled release of the encapsulated active ingredient. However, significant limitations are associated with such capsules, including undesired leaching and the nonbiodegradable nature of the typically used polymers. In addition, the energy cost of manufacturing microcapsules is an important factor to be considered when designing microcapsule systems and the corresponding production processes. Recent factors linked to UN sustainability goals are modifying how such microencapsulation systems should be designed in pursuit of "ideal" microcapsules that are efficient, safe, cost-effective and environmentally friendly. This review provides an overview of advances in microencapsulation, with emphasis on sustainable microcapsule designs. The key evaluation techniques to assess the biodegradability of microcapsules, in compliance with recently evolving European Union requirements, are also described. Moreover, the most common methodologies for the fabrication of microcapsules are presented within the framework of their energy demand. Recent promising microcapsule designs are also highlighted for their suitability toward meeting current design requirements and stringent regulations, tackling the ongoing challenges, limitations, and opportunities.
Subject(s)
Capsules , Drug Compounding , Capsules/chemistry , Drug Compounding/methods , Polymers/chemistryABSTRACT
BACKGROUND: Despite the increasing focus on strengthening One Health capacity building on global level, challenges remain in devising and implementing real-world interventions particularly in the Asia-Pacific region. Recognizing these gaps, the One Health Action Commission (OHAC) was established as an academic community for One Health action with an emphasis on research agenda setting to identify actions for highest impact. MAIN TEXT: This viewpoint describes the agenda of, and motivation for, the recently formed OHAC. Recognizing the urgent need for evidence to support the formulation of necessary action plans, OHAC advocates the adoption of both bottom-up and top-down approaches to identify the current gaps in combating zoonoses, antimicrobial resistance, addressing food safety, and to enhance capacity building for context-sensitive One Health implementation. CONCLUSIONS: By promoting broader engagement and connection of multidisciplinary stakeholders, OHAC envisions a collaborative global platform for the generation of innovative One Health knowledge, distilled practical experience and actionable policy advice, guided by strong ethical principles of One Health.
Subject(s)
One Health , Animals , Asia , Capacity Building , Policy , Zoonoses/prevention & controlABSTRACT
In order to broaden the sensing bandwidth of surface plasmon resonance (SPR) sensors, we propose and demonstrate a dual-channel SPR fiber optic sensor with wide bandwidth. The sensor is fabricated using no-core fiber (NCF), in which the film consists of a silver film and a ZnO film. The sensing characteristics are investigated by simulation and experiment. The resonance wavelength range of the SPR sensor can be significantly tuned by varying the thickness of the ZnO film. In the experiments, a dual-channel SPR sensor that can be used for simultaneous detection of temperature and refractive index was realized by cascading ZnO/Ag film with Ag film. The experimental results show that the two sensing channels are independent without crosstalk. The sensitivity of this sensor is 3512â nm/RIU in the range of 1.333 â¼ 1.385 and 4.6â nm/°C in the range of 0 â¼ 60 °C, which is better than most of the current dual-channel SPR sensors. In addition, the experimental results show that this sensor has good stability in use. The sensor proposed in this work has the advantages of a wide operating wavelength range, simple and compact structure, and high sensitivity. It has a broad application prospect in the simultaneous measurement of refractive index and temperature of liquids.
ABSTRACT
A mirrored transformation optics (MTO) approach is presented to overcome the material mismatch in transformation optics. It makes good use of the reflection behavior and introduces a mirrored medium to offset the phase discontinuities. Using this approach, a high-performance planar focusing lens of transmission type is designed, which has a larger concentration ratio than the other focusing lens obtained by the generalized Snell's law. The MTO will not change any functionality of the original lens and has promising potential applications in imaging and light energy harvesting.
ABSTRACT
Induction of antigen-specific immune tolerance for the treatment of allergic or autoimmune diseases is an attractive strategy. Herein, we investigated the protective effect of a transdermal microneedle patch against allergic asthma by stimulating allergen-specific immune tolerance. We fabricated biodegradable tolerogenic nanoparticles (tNPs) that are loaded with a model allergen ovalbumin (OVA) and an immunomodulator rapamycin, and filled the tNPs into microneedle tips by centrifugation to form sustained-release microneedles. After intradermal immunization, the microneedles successfully delivered the cargos into the skin and sustainedly released them for over 96 h. Importantly, the microneedles induced allergen-specific regulatory T cells (Treg), decreased the levels of pro-inflammatory cytokines and antibodies while increased anti-inflammation cytokines, finally leading to restored immune homeostasis. The lung tissue analysis illustrated that the sustained-release microneedles significantly reduced the infiltration of eosinophils, decreased the accumulation of mucus and collagen, and significantly relived asthma symptoms. Our results suggested that the sustained-release microneedle-based transdermal delivery system can induce antigen-specific immune tolerance with improved compliance and efficacy, providing a new therapeutic strategy for the treatment of allergic and autoimmune diseases.
Subject(s)
Asthma , Autoimmune Diseases , Hypersensitivity , Nanoparticles , Humans , Delayed-Action Preparations , Asthma/drug therapy , Immune Tolerance , Allergens , CytokinesABSTRACT
Spontaneous generation of H2O2 in sub-10 µm-sized water microdroplets has received increasing interest since its first discovery in 2019. On the other hand, due to the short lifetime of these microdroplets (rapid evaporation) and lack of suitable tools to real-time monitor the generation of H2O2 in individual microdroplets, such a seemingly thermodynamically unfavorable process has also raised vigorous debates on the origin of H2O2 and the underlying mechanism. Herein, we prepared water microdroplets with a long lifetime (>1 h) by virtue of microwell confinement and dynamically monitored the spontaneous generation of H2O2 in individual microdroplets via time-lapsed fluorescence imaging. It was unveiled that H2O2 was continuously generated in the as-prepared water microdroplets and an apparent equilibrium concentration of â¼3 µM of H2O2 in the presence of a H2O2-consuming reaction can be obtained. Through engineering the geometry of these microdroplets, we further revealed that the generation rates of H2O2 in individual microdroplets were positively proportional to their surface-to-volume ratios. This also allowed us to extract a maximal H2O2 generation rate of 7.7 nmol m-2 min-1 in the presence of a H2O2-consuming reaction and derive the corresponding probability of spontaneous conversion of interfacial H2O into H2O2 for the first time, that is, â¼1 of 65,000 water molecules in 1 s. These findings delivered strong evidence that the spontaneous generation of H2O2 indeed occurs at the surface of microdroplets and provided us with an important starting point to further enhance the yield of H2O2 in water microdroplets for future applications.
ABSTRACT
Restoring immune tolerance is the ultimate goal for rheumatoid arthritis (RA) treatment. The most reported oral or intravenous injection routes for the immunization of autoantigens cause gastrointestinal side effects, low patient compliance, and unsatisfied immune tolerance induction. Herein, the use of a transdermal microneedle patch is for the first time investigated to codeliver CII peptide autoantigen and rapamycin for reversing immune disorders of RA. The immunized microneedles efficiently recruit antigen-presenting cells particularly Langerhans cells, and induce tolerogenic dendritic cells at the administration skin site. The tolerogenic dendritic cells further homing to lymph nodes to activate systemic Treg cell differentiation, which upregulates the expression of anti-inflammatory mediators while inhibiting the polarization of Th1/2 and Th17 T cell phenotypes and the expression of inflammatory profiles. As a result, the optimized microneedles nearly completely eliminate RA symptoms and inflammatory infiltrations. Furthermore, it is demonstrated that a low dose of rapamycin is crucial for the successful induction of immune tolerance. The results indicate that a rationally designed microneedle patch is a promising strategy for immune balance restoration with increased immune tolerance induction efficiency and patient compliance.
Subject(s)
Arthritis, Rheumatoid , Langerhans Cells , Humans , Th17 Cells , Arthritis, Rheumatoid/therapy , Immune Tolerance , Sirolimus/pharmacologyABSTRACT
Epoxidation of allyl chloride and hydrogen peroxide (H2O2) carried out in heterogeneous catalytic systems suffer from poor reaction efficiency due to their heavy mass transfer resistance present at the liquid-liquid interface. Pickering interfacial catalysis (PIC) provides an elegant solution by involving the design of amphiphilic heterogeneous catalysts, which can act as emulsifiers simultaneously. In this study, interface-active polyoxometalate-loaded hyper-crosslinked nanoparticles (HCNPs) were designed. The structural properties of materials were characterized in detail by elemental analysis, Zeta potential, ICP-OES, SEM, TEM, BET, FT-IR, TGA, and XPS. The prepared nanoparticles can build efficient W/O PIC systems with allyl chloride and H2O2. Systematic experiments indicate that catalysts' surface properties, catalyst dosage, and water/oil volume ratio significantly affect the PIC system's catalytic activity and emulsion properties. Moreover, this PIC system maintains high stability after the reaction and can be reused for at least 8 cycles. Excitingly, these interface-active HCNPs can also efficiently promote allyl chloride epoxidation in the absence of solvent and external stirring, illustrating that this approach holds great potential for developing catalytic systems suitable for multiphase reactions.
ABSTRACT
It is well established that the biomechanical properties of the Stratum Corneum (SC) are influenced by both moisture-induced plasticization and the lipid content. This study employs Atomic Force Microscopy to investigate how hydration affects the surface topographical and elasto-viscoplastic characteristics of corneocytes from two anatomical sites. Volar forearm cells underwent swelling when immersed in water with a 50% increase in thickness and volume. Similarly, medial heel cells demonstrated significant swelling in volume, accompanied by increased cell area and reduced cell roughness. Furthermore, as the water activity was increased, they exhibited enhanced compliance, leading to a decreased Young's modulus, hardness, and relaxation times. Moreover, the swollen cells also displayed a greater tolerance to strain before experiencing permanent deformation. Despite the greater predominance of immature cornified envelopes in plantar skin, the comparable Young's modulus of medial heel and forearm corneocytes suggests that cell stiffness primarily relies on the keratin matrix rather than on the cornified envelope. The Young's moduli of the cells in distilled water are similar to those reported for the SC, which suggests that the corneodesmosomes and intercellular lamellae lipids junctions that connect the corneocytes are able to accommodate the mechanical deformations of the SC.
Subject(s)
Epidermis , Skin , Water , Keratins , Cell MembraneABSTRACT
BACKGROUND: Pressure ulcers (PUs) are chronic wounds that are detrimental to the quality of life of patients. Despite advances in monitoring skin changes, the structure and function of skin cells over the site of pressure ulcers are not fully understood. OBJECTIVE: The present study aims to evaluate local changes in the properties of superficial corneocytes in category 1 PU sites sampled from a cohort of hospitalised patients. METHODS: Cells were collected from a PU-compromised site and an adjacent control area and their topographical, maturation and mechanical properties were analysed. RESULTS: Corneocytes at the PU-compromised site were characterised by higher levels of immature cornified envelopes (p < 0.001) and greater amounts of desmoglein-1 (corneodesmosomal protein) (p < 0.001) compared to the adjacent control area. The cells at the control site presented the typical ridges-and-valleys topographical features of sacrum corneocytes. By contrast, the PU cells presented circular nano-objects at the cell surface, and, for some patients, the cell topography was deformed. CEs at the PU site were also smaller than at the control site. Although differences were not observed in the mechanical properties of the cells, those of the elderly patients were much softer compared with young subjects. CONCLUSION: This is the first study investigating the changes in corneocyte properties in category I pressure ulcers. Superficial cells at the PU sites showed altered topographical and maturation characteristics. Further studies are required to elucidate if these changes are a consequence of early loss of skin integrity or a result of mechanical and microclimate insults to the skin surface.
Subject(s)
Pressure Ulcer , Humans , Aged , Quality of Life , Skin , Keratinocytes , Cell MembraneABSTRACT
BACKGROUND: The Stratum Corneum (SC) is the first barrier of the skin. The properties of individual cells are crucial in understanding how the SC at different anatomical regions maintains a healthy mechanical barrier. The aim of the current study is to present a comprehensive description of the maturation and mechanical properties of superficial corneocytes at different anatomical sites in the nominal dry state. MATERIALS AND METHODS: Corneocytes were collected from five anatomical sites: forearm, cheek, neck, sacrum and medial heel of 10 healthy young participants. The surface topography was analysed using Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM). The level of positive-involucrin cornified envelopes (CEs) and desmoglein-1 (Dsg1) were used as indirect measures of immature CEs and corneodesmosomes, respectively. In addition, AFM nanoindentation and stress-relaxation experiments were performed to characterise the mechanical properties. RESULTS: Volar forearm, neck and sacrum corneocytes presented similar topographies (ridges and valleys) and levels of Dsg1 (13-37%). In contrast, cheek cells exhibited circular nano-objects, while medial heel cells were characterized by villi-like structures. Additionally, medial heel samples also showed the greatest level of immature CEs (32-56%, p < 0.001) and Dsg1 (59-78%, p < 0.001). A large degree of inter-subject variability was found for the Young's moduli of the cells (0.19-2.03 GPa), which was correlated with the level of immature CEs at the cheek, neck and sacrum (p < 0.05). CONCLUSION: It is concluded that a comprehensive study of the mechanical and maturation properties of corneocytes may be used to understand the barrier functions of the SC at different anatomical sites.
Subject(s)
Epidermis , Skin , Humans , Epidermis/chemistry , Keratinocytes , Epidermal Cells , ForearmABSTRACT
Polyamines have emerged as a promising class of CO2 absorbents due to their remarkable sequestration capacity. However, their potential industrial application as aqueous absorbents is significantly hindered by a low regeneration efficiency and high energy consumption. To address these issues, this study investigates the use of triethylenetetramine (TETA) and ethylene glycol (EG) to develop a nonaqueous absorbent. The incorporation of EG enhances absorption performance and reduces the regeneration energy needed for TETA, whereas the high viscosity of the absorbent impedes absorption rate, amine efficiency, and regeneration efficiency. In order to enhance CO2 capture, micron-sized reaction units (SiO2@TETA-EG) were developed by encapsulating TETA solution with nanosilica. The SiO2@TETA-EG composite exhibits a large specific surface area (99 m2/g), with a porous shell structure and improved fluidity, which effectively counteracts the negative effects caused by high viscosity. Notably, SiO2@TETA-EG indicates a noticeably higher apparent rate constant of 4.29 min-1 at 323.2 K compared to the TETA-EG solution. Furthermore, SiO2@TETA-EG displays a 28.4% boost in regeneration efficiency while maintaining favorable stability in pore size and shape after regeneration.
ABSTRACT
Expensive rhodium (Rh)-based catalysts have been widely used for the hydroformylation of propene. To find a cheaper and effective alternative to these Rh-based catalysts, herein, a series of phosphine ligands were used to coordinate with iridium, and their catalytic reactivities for the hydroformylation of propene were systematically investigated in this study. The effects of different phosphine ligands, pressures, temperatures, and catalyst dosages on the hydroformylation of propene were investigated. Tripyridyl phosphine iridium Ir2(cod)2Cl2-P(3-py)3 (Ir(I)-L5) and its derivatives exhibit the highest catalytic reactivity. Surprisingly, the catalytic reactivity of Ir(I)-L5 is higher than that of Rh2(cod)2Cl2-P(3-py)3 (Rh(I)-L5). When the Ir(I)-L5 complex is used as the catalyst, reactions performed in a polar solvent gave higher turnover number (TON) values than those in a non-polar solvent. Up to a TON of 503 can be obtained. Different n-butyraldehyde/iso-butyraldehyde (n/i) ratios can be obtained by adjusting the phosphine ligands or the proportion of gas pressure. The catalyst showed good reusability in five recycling experiments. Furthermore, based on DFT theoretical calculations, a probable reaction mechanism was proposed. It is reliable that an Ir-based catalyst can be considered as a highly effective catalyst for the hydroformylation of propylene with CO.
ABSTRACT
The role of the mechanical environment in defining tissue function, development and growth has been shown to be fundamental. Assessment of the changes in stiffness of tissue matrices at multiple scales has relied mostly on invasive and often specialist equipment such as AFM or mechanical testing devices poorly suited to the cell culture workflow.In this paper, we have developed a unbiased passive optical coherence elastography method, exploiting ambient vibrations in the sample that enables real-time noninvasive quantitative profiling of cells and tissues. We demonstrate a robust method that decouples optical scattering and mechanical properties by actively compensating for scattering associated noise bias and reducing variance. The efficiency for the method to retrieve ground truth is validated in silico and in vitro, and exemplified for key applications such as time course mechanical profiling of bone and cartilage spheroids, tissue engineering cancer models, tissue repair models and single cell. Our method is readily implementable with any commercial optical coherence tomography system without any hardware modifications, and thus offers a breakthrough in on-line tissue mechanical assessment of spatial mechanical properties for organoids, soft tissues and tissue engineering.
Subject(s)
Elasticity Imaging Techniques , Vibration , Elasticity Imaging Techniques/methods , Tomography, Optical Coherence/methods , Cartilage , OrganoidsABSTRACT
Mouse sperm-associated antigen 6 like (SPAG6L) is an axoneme central apparatus protein, essential for the normal function of the ependymal cell and lung cilia, and sperm flagella. Accumulated evidence has disclosed multiple biological functions of SPAG6L, including ciliary/flagellar biogenesis and polarization, neurogenesis, and neuronal migration. Conventional Spag6l knockout mice died of hydrocephalus, which impedes further investigation of the function of the gene in vivo. To overcome the limitation of the short lifespan of conventional knockout mice, we developed a conditional allele by inserting two loxP sites in the genome flanking exon 3 of the Spag6l gene. By crossing the floxed Spag6l mice to a Hrpt-Cre line which expresses Cre recombinase ubiquitously in vivo, mutant mice that are missing SPAG6L globally were obtained. Homozygous mutant Spag6l mice showed normal appearance within the first week after birth, but reduced body size was observed after 1 week, and all developed hydrocephalus and died within 4 weeks of age. The phenotype mirrored that of the conventional Spag6l knockout mice. The newly established floxed Spag6l model provides a powerful tool to further investigate the role of the Spag6l gene in individual cell types and tissues.
Subject(s)
Hydrocephalus , Animals , Mice , Hydrocephalus/genetics , Integrases/genetics , Mice, KnockoutABSTRACT
The manchette is a transient and unique structure present in elongating spermatids and required for proper differentiation of the germ cells during spermatogenesis. Previous work indicated that the MEIG1/PACRG complex locates in the manchette and is involved in the transport of cargos, such as SPAG16L, to build the sperm flagellum. Here, using co-immunoprecipitation and pull-down approaches in various cell systems, we established that DNALI1, an axonemal component originally cloned from Chlamydomonas reinhardtii, recruits and stabilizes PACRG and we confirm in vivo, the co-localization of DNALI1 and PACRG in the manchette by immunofluorescence of elongating murine spermatids. We next generated mice with a specific deficiency of DNALI1 in male germ cells, and observed a dramatic reduction of the sperm cells, which results in male infertility. In addition, we observed that the majority of the sperm cells exhibited abnormal morphology including misshapen heads, bent tails, enlarged midpiece, discontinuous accessory structure, emphasizing the importance of DNALI1 in sperm differentiation. Examination of testis histology confirmed impaired spermiogenesis in the mutant mice. Importantly, while testicular levels of MEIG1, PACRG, and SPAG16L proteins were unchanged in the Dnali1 mutant mice, their localization within the manchette was greatly affected, indicating that DNALI1 is required for the formation of the MEIG1/PACRG complex within the manchette. Interestingly, in contrast to MEIG1 and PACRG-deficient mice, the DNALI1-deficient mice also showed impaired sperm spermiation/individualization, suggesting additional functions beyond its involvement in the manchette structure. Overall, our work identifies DNALI1 as a protein required for sperm development.
Subject(s)
Seeds , Sperm Tail , Male , Mice , Animals , Spermatogenesis , Proteins/metabolism , Spermatids/metabolism , Testis/metabolism , Nuclear Proteins/metabolism , Phosphoproteins/metabolism , Cell Cycle Proteins/metabolismABSTRACT
Peroxisomal fatty acyl-CoA reductase 1 (FAR1) is a rate-limiting enzyme for ether lipid (EL) synthesis. Gene mutations in FAR1 cause a rare human disease. Furthermore, altered EL homeostasis has also been associated with various prevalent human diseases. Despite their importance in human health, the exact cellular functions of FAR1 and EL are not well-understood. Here, we report the generation and initial characterization of the first Far1 knockout (KO) mouse model. Far1 KO mice were subviable and displayed growth retardation. The adult KO male mice had smaller testes and were infertile. H&E and immunofluorescent staining showed fewer germ cells in seminiferous tubules. Round spermatids were present but no elongated spermatids or spermatozoa were observed, suggesting a spermatogenesis arrest at this stage. Large multi-nucleated giant cells (MGC) were found lining the lumen of seminiferous tubules with many of them undergoing apoptosis. The immunofluorescent signal of TEX14, an essential component of intercellular bridges (ICB) between developing germ cells, was greatly reduced and mislocalized in KO testis, suggesting the disrupted ICBs as an underlying cause of MGC formation. Integrative analysis of our total testis RNA-sequencing results and published single-cell RNA-sequencing data unveiled cell type-specific molecular alterations underlying the spermatogenesis arrest. Many genes essential for late germ cell development showed dramatic downregulation, whereas genes essential for extracellular matrix dynamics and cell-cell interactions were among the most upregulated genes. Together, this work identified the cell type-specific requirement of ELs in spermatogenesis and suggested a critical role of Far1/ELs in the formation/maintenance of ICB during meiosis.