Natural Affinity Driven Modification by Silicene to Construct a "Thermal Switch" for Tumorous Bone Loss.

Tumorous bone defects present significant challenges for surgical bio-reconstruction due to the dual pathological conditions of residual tumor presence and extensive bone loss following excision surgery. To address this challenge, a "thermal switch" smart bone scaffold based on the silicene nanosheet-modified decalcified bone matrix (SNS@DBM) is developed by leveraging the natural affinity between collagen and silicene, which is elucidated by molecular dynamics simulations. Benefitting from its exceptional photothermal ability, biodegradability, and bioactivity, the SNS@DBM "thermal switch" provides an integrated postoperative sequential thermotherapy for tumorous bone loss by exerting three levels of photothermal stimulation (i.e., strong, moderate, and nonstimulation). During the different phases of postoperative bioconstruction, the SNS@DBM scaffold realizes simultaneous residual tumor ablation, tumor recurrence prevention, and bone tissue regeneration. These biological effects are verified in the tumor-bearing nude mice of patient-derived tissue xenografts and critical cranium defect rats. Mechanism research prompts moderate heat stimulus generated by and coordinating with SNSs can upregulate osteogenic genes, promote macrophages M2 polarization, and intensify angiogenesis of H-type vessels. This study introduces a versatile approach to the management of tumorous bone defects.

Comparative study of three different fixation techniques for the treatment of Neer type IIb distal clavicle fractures: A retrospective cohort study.

Background: Recently, a locking plate (LP) combined with a suture button was applied for distal clavicle Neer type IIb fractures. However, to our knowledge, there is limited information on clinical outcomes surrounding locking plates combined with a suture button in the treatment of Neer type IIb distal clavicle fractures. The aim of this study was to compare the outcomes among three different fixation techniques for the treatment of Neer type IIb distal clavicle fractures. Methods: We performed a retrospective cohort study of 53 patients with Neer type IIb distal clavicle fractures who were treated with a hook plate (HP group, 16 patients), a locking plate alone (LP group, 18 patients), or a locking plate with a suture button (LPSB group, 19 patients) in our hospital between March 2014 and August 2019. The clinical and radiological outcomes were evaluated, including union time, postoperative complications, and function of the shoulder joint. Results: The follow-up period was at least 2 years for all patients. All patients in the LPSB group achieved bone healing at the final follow-up. No significant differences were observed, including age, sex, side, time to surgery, duration of surgery, and mean follow-up period among the three groups (p > 0.05). The union time was shorter in the LPSB group than in the other two groups (p < 0.05). Postoperative complications were lower in the LPSB group than in the other two groups (p < 0.05). The visual analog scale score and Constant-Murley score in the LPSB group were better than those in the other groups at 3 and 6 months postoperatively (p < 0.05). Conclusion: Compared with HP and LP alone, LPSB yields better clinical outcomes and lower complication rates in the treatment of Neer type IIb distal clavicle fractures.

O-Arm-Navigated, Robot-Assisted Versus Conventional CT Guided Radiofrequency Ablation in Treatment of Osteoid Osteoma: A Retrospective Cohort Study.

Background: Osteoid osteoma is a common benign bone tumor, and clinically there is severe local pain that typically worsens at night. The conventional CT-guided radiofrequency ablation (RFA) was widely used in the treatment of osteoid osteoma (OO), which could result in some radiation-related and imprecise complications due to the overdose of radiation exposure. This study aimed to compare the surgical effect of robot-assisted RFA with O-arm navigation and conventional CT-guided RFA in the treatment of OO. Methods: Sixty-two patients who underwent robot-assisted RFA with O-arm navigation (Robot-RFA, n = 24) or CT-guided RFA (CT-RFA, n = 38) were included in this retrospective cohort study. The mean follow-up time was 23.3 months. The intra-operative data, primary technical success rate, visual analog scale (VAS), and post-operative complications were analyzed. Results: Primary technical success was obtained in 23 patients who had robot-assisted RFA, and 35 patients who had conventional CT-guided RFA. One patient in Robot-RFA group and three patients in CT-RFA group with pain recurrence received repeat-RFA and had a secondary success. Mean operation time and dose of radiation exposure were lower in Robot-RFA group than that in CT-RFA group. The Robot-RFA group took fewer K-wire adjustment times for each patient than the CT-RFA group. There was a statistically significant difference in the mean operation time, dose of radiation exposure, and K-wire adjustment times between the groups (p < 0.05). No complications associated with the procedure were reported in the two groups during the follow-up period. Conclusion: Robot-assisted RFA with O-arm navigation is a safer and more precise strategy in the treatment of osteoid osteoma with less operation time and radiation exposure compared with the conventional CT-guided radiofrequency ablation.

Donut-like MOFs of copper/nicotinic acid and composite hydrogels with superior bioactivity for rh-bFGF delivering and skin wound healing.

BACKGROUND: Skin injury and the resultant defects are common clinical problems, and usually lead to chronic skin ulcers and even life-threatening diseases. Copper, an essential trace element of human body, has been reported to promote the regeneration of skin by stimulating proliferation of endothelial cell and enhance angiogenesis. RESULTS: Herein, we have prepared a new donut-like metal-organic frameworks (MOF) of copper-nicotinic acid (CuNA) by a simple solvothermal reaction. The rough surface of CuNA is beneficial for loading/release basic fibroblast growth factor (bFGF). The CuNAs with/without bFGF are easily processed into a light-responsive composite hydrogel with GelMA, which not only show excellent mechanical properties, but also display superior biocompatibility, antibacterial ability and bioactivity. Moreover, in the in vivo full-thickness defect model of skin wound, the resultant CuNA-bFGF@GelMA hydrogels significantly accelerate the wound healing, by simultaneously inhibiting the inflammatory response, promoting the new blood vessels formation and the deposition of collagen and elastic fibers. CONCLUSIONS: Considering the superior biocompatibility, antibacterial ability and bioactivity, the CuNA and its composite light-responsive hydrogel system will be promising in the applications of skin and even other tissue regeneration.

Anterior positioning screw in proximal femoral plating restricts posterior tilt of retroverted femoral neck fractures: a retrospective cohort study.

BACKGROUND: Preoperative posterior tilt is a risk factor for fixation failure in femoral neck fractures. This study aimed to evaluate the configuration of anterior positioning screw in proximal femoral plating in the treatment of retroverted femoral neck fractures in terms of resisting posterior tilt. METHODS: We retrospectively analyzed patients with retroverted femoral neck fractures who were fixed by proximal femoral plating from January 2014 to August 2019. All patients were divided into two groups according to screw configuration: anterior long-threaded screw (ALTS, n = 36) and normally short-threaded screws (NTS, n = 46). Baseline characteristics were reviewed and radiological and clinical outcomes were analyzed. Logistic regression analysis was used to identify risk factors for developing posterior tilt. RESULTS: Age, gender, Garden classification, posterior comminution, and reduction quality showed no significant difference between the groups. Increased posterior tilt was lower in the ALTS group (3.2°, 2.1-4.3°) than that in the NTS group (5.3°, 4.2-8.3°) (p < 0.001), and the percentage of people with > 5° of posterior tilt was also lower in the ALTS group (5, 13.9% vs. 24, 52.2%; p < 0.001). Femoral neck shortening (FNS) was lower in the ALTS group (3.1 (2.1-4.7) mm vs. 4.3 (3.1-6.3) mm, p = 0.003), though not statistically significant when using 5 mm as the cut-off value. Harris Hip Score in the ALTS group was higher than that in the NTS group (87.0, 84.0-90.0 vs. 82.0, 76.0-84.5; p < 0.001). Postoperative complications including delayed union, nonunion, and avascular necrosis were comparable between the groups. Multivariable analysis identified posterior comminution (OR 15.9, 95% CI 3.6-70.3, p < 0.001), suboptimal reduction quality (OR 12.0, 95% CI 2.6-56.1, p = 0.002), and NTS configuration (reference: ALTS configuration) (OR 21.9, 95% CI 4.1-116.4, p < 0.001) as risk factors for developing posterior tilt. CONCLUSIONS: Configuration of anterior positioning screw in proximal femoral plating provides better resistance against posterior tilt in the fixation of retroverted femoral neck fractures. Also, posterior comminution, suboptimal reduction, and NTS configuration (reference: ALTS) are risk factors for developing posterior tilt. TRIAL REGISTRATION: The trial registration number was ChiCTR2000039482 .

Configuration of short- and long-threaded cannulated screws in proximal femoral plating decreases varus collapse of femoral neck fractures: A retrospective cohort study.

OBJECTIVES: Proximal femoral plating serves as a good alternative for the fixation of femoral neck fractures, but fixation loss still occurs. This study aimed to evaluate the effect of a hybrid configuration of short- and long-threaded cannulated screws in proximal femoral plating in terms of decreasing varus collapse of femoral neck fractures. MATERIALS AND METHODS: We retrospectively analyzed 86 patients with femoral neck fractures who were fixed by proximal femoral plating from January 2015 to June 2019. These patients were divided into two groups according to screw configuration: short- and long-threaded cannulated screws (SLTS, n = 38) and short-threaded cannulated screws (STS, n = 48). Radiological and clinical outcomes including screw withdraw, nonunion, avascular necrosis, caput-collum-diaphysis (CCD) angle, amount of femoral neck shortening (FNS), and Harris Hip Score (HHS) were compared between the groups. RESULTS: Preoperative characteristics including age, gender, Garden type, duration of surgery, and reduction quality were not significantly different between the two groups (p > 0.05). Less decreased CCD angle was observed in the SLTS group (-0.4° (-1.4 - 1.8)) compared with that in the STS group (7.9° (6.3 - 11.0)) (p < 0.001). The SLTS group also presented with fewer amount of FNS (3.2 (2.7 - 3.8) mm vs. 5.1 (4.2 - 5.9) mm, p < 0.001). Bone union was achieved in all patients and no avascular necrosis was observed during the follow-up. The HHS was higher in the SLTS group (86.4 ± 5.1) than that in the STS group (81.5 ± 4.5) (p < 0.001). CONCLUSION: The hybrid configuration of short- and long-threaded screws in proximal femoral plating offers better resistance against varus collapse and yields better functional outcomes in femoral neck fractures.

Hybrid locked medial plating in dual plate fixation optimizes the healing of comminuted distal femur fractures: A retrospective cohort study.

OBJECTIVES: Dual plate fixation has been reported to be effective in the treatment of comminuted distal femur fractures (DFFs). However, optimized use of the medial plate and screws is less studied. This study aimed to evaluate the effect of a hybrid configuration of the medial plate in dual plate fixation of comminuted DFFs in promoting fracture healing. MATERIALS AND METHODS: We retrospectively analyzed 62 patients with comminuted DFFs (AO/OTA 33-A3/33-C2/33-C3) from January 2015 to March 2020, who were either fixed with lateral locked plating augmented with hybrid locked medial plating (LP-HLMP, n = 32) or lateral locked plating (LLP, n = 30) alone. Specifically, compression screws were applied in the middle of the medial plate and flanked by locking ones at both ends. Baseline characteristics, radiological and clinical outcomes were reviewed and analyzed. Multivariate logistic regression analysis was used to identify predictive factors for early fracture healing, and risk factors for delayed union/nonunion. RESULTS: Demographics including age, gender, smoking, diabetes, and injury mechanism were comparable between the two groups. Reduction quality was better in the LP-HLMP group (p < 0.001). Although the LP-HLMP group experienced longer duration of surgery (125 min vs. 100 min, p < 0.001), sign of healing at 3 months was more obvious in this group (75%, 24/32 vs. 30%, 9/30; p < 0.001). The LP-HLMP group also presented with higher union rate (93.8%, 30/32 vs. 56.7%, 17/30; p = 0.001) and lower reoperation rate (0%, 0/32 vs. 13.3%, 4/30; p = 0.049). Kolment score showed no statistical significance between the two groups. Multivariate analysis revealed that younger age (< 60 years) (OR 5.99, 95%CI 1.16 - 31.03; p = 0.001) and LP-HLMP fixation (OR 45.90, 95% CI 4.78 - 440.56; p = 0.001) predict early healing; while smoking (OR 17.80, 95% CI 2.41 - 131.49; p = 0.01) and fracture translation (OR 3.49, 95% CI 1.46 - 8.32; p = 0.01) were identified as risk factors for delayed union/nonunion. CONCLUSION: Hybrid locked medial plating in this study favors the healing of comminuted DFFs and reduces reoperation. Additionally, smoking and suboptimal reduction (translation) predict delayed union/nonunion.

Dynamic limited axial compression yields favorable functional outcomes in the fixation of Pauwels type-3 femoral neck fractures: A retrospective cohort study.

PURPOSE: Pauwels type-3 femoral neck fractures are challenging injuries to manage with high rates of complications after internal fixation and no consensus has been reached regarding the optimal fixation construct. The current study aims to evaluate the effect of dynamic limited axial compression in parallel screws combined with medial buttress plate (SMBP) or lateral compression plate (LCP) fixation of Pauwels type-3 femoral neck fractures. METHODS: We performed a retrospective analysis of 51 cases of Pauwels type-3 femoral neck fractures who were fixed by SMBP or LCP. Specifically, the screw fixing the femoral head in the buttress plate was omitted. Postoperative complications and functional outcomes were mainly studied. RESULTS: With a mean follow-up of 19.9 months, the rate of neck shortening was higher in the LCP group than that in SMBP group (32.1% vs. 8.7%, p = 0.04). Neither nonunion nor avascular necrosis was observed in both groups. Good-to-excellent Harris hip score accounts for 95.2% in SMBP group and 89.3% in LCP group (p = 0.40). Moreover, older age, fracture comminution and compression plate fixation predispose to neck shortening. CONCLUSION: Dynamic limited axial compression by SMBP or LCP fixation was effective to improve the functional outcome of patients with Pauwels type-3 femoral neck fractures.

Preparation of porous calcium phosphate microspheres with phosphate-containing molecules at room temperature for drug delivery and osteogenic differentiation.

Calcium phosphate (CaP) has similar chemical properties to those of the inorganic component of human bone tissue, for potential application in drug delivery for the chemotherapy of osteosarcoma. In this work, CaP with a porous microsphere structure has been synthesized using fructose-1,6-bisphosphate (FBP) as the phosphorus source by a simple wet-chemical strategy at room temperature. The CaP porous microspheres, as an organic-inorganic hybrid nano-platform, exhibit good doxorubicin (Dox) loading capacity, and Dox-loading CaP, enhancing the in vitro chemotherapy of osteosarcoma cells. The CaP porous microspheres show high biocompatibility, and induce the osteogenic differentiation of MC3T3-E1. These results indicate that the CaP porous microspheres reported in this study are promising for application as an anti-osteosarcoma drug carrier and osteoinductive material for bone regeneration in the treatment of osteosarcoma.

AMD3100 reduces CXCR4-mediated survival and metastasis of osteosarcoma by inhibiting JNK and Akt, but not p38 or Erk1/2, pathways in in vitro and mouse experiments.

Osteosarcoma (OS) has an unfavorable prognosis and tends to metastasize to lung tissue. Although the CXCL12-CXCR4 axis appears to affect progression and metastasis in numerous tumors, its mechanism and downstream pathways in OS remain unclear. We used western blotting and flow cytometry to detect CXCR4 and CXCR7 expression in two OS cell lines (LM8 and Dunn). An MTT assay was used to evaluate the effects of CXCL12 and AMD3100, a specific CXCR4 antagonist, on cell viability. Flow cytometry was utilized to analyze changes in apoptosis induced by serum deprivation following treatment with CXCL12 and AMD3100. A Transwell assay was used to assess cell migration in response to CXCL12 and AMD3100. Western blotting was performed to identify the phosphorylation of signaling molecules (JNK, c-Jun, Akt, p38 and Erk1/2) and expression of caspase-3 and -8, and PARP. Mouse models were employed to evaluate AMD3100 inhibition of primary OS growth and lung metastasis in vivo. CXCR4 expression was detected in LM8 but not Dunn cells, and neither cell line expressed CXCR7. The addition of CXCL12 induced the survival and migration of serum-starved CXCR4+ LM8 cells activating JNK and Akt pathways, which were abrogated by adding AMD3100. However, similar results were not observed in CXCR4- Dunn cells. CXCL12 protected LM8, but not Dunn cells, from apoptosis induced by serum deprivation by suppressing PARP cleavage, which was partly reversed by AMD3100. In a mouse model, AMD3100 reduced primary tumor growth and lung metastasis compared with the controls. Thus, the CXCL12-CXCR4 axis regulated OS survival and metastasis through the JNK and Akt pathways, and blocking them with AMD3100 was found to be a potential OS treatment.

Elemene, one ingredient of a Chinese herb, against malignant tumors: a literature-based meta-analysis.

We sought to evaluate the efficacy of elemene in cancer treatment. We searched the literature using several databases up to October 2011. Thirty-eight trials met inclusion criteria. The meta-analysis demonstrated that elemene plus chemotherapy was associated with a significant rise in the number of patients who reported improved tumor response, as well as a significant lower risk in patients with leucopenia as compared with chemotherapy alone. However, the pooled results failed to show favorable effects of elemene plus chemotherapy on survival rate compared with chemotherapy alone. This study suggested that elemene might enhance effectiveness of chemotherapy in cancer therapy.