Advanced AIE Materials for Environmental Monitoring: Selective Sensing of Thorium(IV) in Aquatic Systems.

Thorium (Th) is commonly used in various applications, but its long-term exposure poses health risks, necessitating its detection in aqueous environments. Traditional methods such as inductively coupled plasma mass spectrometry are sensitive but require complex instrumentation. Optical sensors, particularly fluorometry-based methods, are simpler, cost-effective, and selective. However, developing effective aggregation-induced emission (AIE) turn-on sensors for Th(IV) requires water-soluble fluorophores with a low background fluorescence. In the present work, we report a turn-on detection method for Th(IV) based on the AIE of the fluorophore tetra(4-sulfophenyl) ethylene (SuTPE). Th(IV)-induced aggregation of SuTPE and the simultaneous drastic enhancement of the emission property of SuTPE have been utilized for the selective sensing of Th(IV) in 100% aqueous media. The sensing mechanism was explored using ground-state absorption, steady-state and time-resolved emission, FTIR, DLS, SEM, AFM and quantum chemical studies of the SuTPE-Th(IV) complex. The selectivity of the present probe toward Th(IV) ions has been established by studying the interference of several metal ions, including lanthanides and uranyl ions. The LOD for Th(IV) was estimated to be 240 nM (56 ppb). The performance of the probe was demonstrated in tap water and diluted seawater matrixes. This work provides a significant advance for Th(IV) detection in aqueous environments, with implications for environmental monitoring and health safety.

Land use & land cover dynamics and its relationship with nitrate pollution in groundwater around inactive mine areas using geospatial techniques, SW part of Cuddapah basin, Southern India.

Geospatial maps can show how the ineffective operations of inactive mines affect water and aquifer quality. As such, the purpose of this study is to assess the impact of mining and irrigation on the aquifer ecosystem through the evaluation of LULC and slope maps through the application of Landsat 8 OLI/TIRS and DEM data. A total of 50 groundwater samples were prepared from villages in the close proximity to inactive mines during pre and post monsoon periods in 2021. The results of the analysis revealed alarming statistics, that 14% of groundwater samples exceeded the WHO nitrate limit in pre & post monsoon season, indicating a high-risk in the study area. According to guidelines (USEPA, 2014), 34% in pre-monsoon and 26% post-monsoon of samples exceeded the THI levels for adults and children respectively, indicating non-carcinogenic health risks. In addition, 80% of the samples in both seasons exhibited high NPI values, indicating nitrate contamination associated with blue baby syndrome. From the Geospatial analysis the findings from the LULC classification indicate that there has been a significant increase in cropland area from 2016 to 2021 due to changes in forest land, fallow land, and water resources. These problems have been exacerbated by the expansion of cultivated land, which has increased from 71.1 square kilometers in 2016 to 118 square kilometers in 2021, accounting for 13.1% of the total area. This expansion, coupled with elevated water body resource availability, has compounded the nitrate pollution including in intensely irrigated regions. The slope map analysis revealed that the inactive mines occur at low slope, high rainfall areas and these are compounded by runoff from other sources such as domestic and agricultural wastes. For these matters, sealing and remediating these inactive mines is essential so as to prevent further nitrate leakage.

Shear induced remobilization of buried synthetic microfibers.

Microplastics are known to accumulate in sediment beds of aquatic environments where they can be buried. Once buried they can remobilize due to high energetic events, entering the water column again. Here, turbulence induced by an oscillating grid device was used to investigate the remobilization of microfibers (MF) buried into the sediment bed. Four different types of plastic fibers commonly used for several industrial applications (PET, PP, PA and LDPE) and two types of soils (cohesive and non-cohesive) were investigated. Particles were in depth characterized via 3D reconstruction to estimate important parameters like the Corey shape factor and the settling velocity. Experimental runs explored a wide range of shear stresses. Measurements were taken at different time steps (between 15 min and 240 min from the start of each run). The results have shown that the remobilization of MFs is directly proportional to the value of the shear rate and the duration of the disturbance. Also, buoyant MFs were found more prone to remobilize respect to the denser ones. Drawing from experimental observations of the key parameters affecting MF remobilization, a non-dimensional predictive model was developed. A comparison with previous studies was performed to validate the model in order to predict MF remobilization in aquatic environments.

Effects of Heavy Metal Pollution on the Element Distribution in Hydrobios.

At a time when heavy metal pollution is increasing, assessing the levels of contamination and associated health risks is crucial. Samples of water, aquatic plants, and fish were collected from four key areas of heavy metal pollution prevention and control in Zhejiang Province. The levels of elements were analyzed using inductively coupled plasma optical emission spectrometry (ICP-OES). A human health risk model was also developed. The study revealed that heavy metal pollution in the five industrial zones exceeded the national standard for Class V water. Elements like arsenic (As), cadmium (Cd), and chromium (Cr) exceeded permissible levels in aquatic plants across all industrial zones; the exception was lead (Pb). Moreover, the heavy metal concentrations in subject fish tissues collected from each industrial area exceeded safe limits, especially in the gut. According to the human health risk evaluation model, the health risk (1.12 × 10-3) and children's health risk (1.10 × 10-3) in these prevention and control zones surpassed the maximum acceptable human risk values. In conclusion, heavy metal elements, along with other pollutants, accumulate and become concentrated in the examined aquatic plants and fish. These pollutants move through the food chain, impacting the entire aquatic ecosystem and posing a health risk to nearby populations.

Whole genome sequence of Vibrio cholerae NB-183 isolated from freshwater in Ontario, Canada harbors a unique gene repertoire.

OBJECTIVE: Vibrio cholerae is an enteric pathogen that poses a significant threat to global health. It causes severe dehydrating diarrheal disease cholera in humans. V. cholerae could be acquired either from consuming contaminated seafood or direct contact with polluted waters. As part of a larger program that assesses the microbial community profile in aquatic systems, V. cholerae strain NB-183 was isolated and characterized using a combination of culture- and whole-genome sequencing-based approaches. DATA DESCRIPTION: Here we report the assembled and annotated whole-genome sequence of a V. cholerae strain NB-183 isolated from a recreational freshwater lake in Ontario, Canada. The genome was sequenced using short-read Illumina systems. The whole-genome sequencing yielded 4,112,549 bp genome size with 99 contigs with an average genome coverage of 96× and 47.42% G + C content. The whole genome-based comparison, phylogenomic and gene repertoire indicates that this strain harbors multiple virulence genes and biosynthetic gene clusters. This genome sequence and its associated datasets provided in this study will be an indispensable resource to enhance the understanding of the functional, ecological, and evolutionary dynamics of V. cholerae.

Optimization of glass separating funnels to facilitate microplastic extraction from sediments.

Recent studies on the distribution of microplastics in aquatic sediments have deployed different methods and devices for density separation of microplastics from sediments. However, instrument specific limitations have been noted, including their high cost, difficulty in handling, or/and the potential for elevated contamination risk due to their plastic composition. This study improves existing sediment microplastic separation techniques by modifying the commonly used conical shape glass separating funnels. The modification consists in connecting a silicone tube at the base of the funnel, whose opening and closure was manually controlled by a Mohr clamp. This adjustment made to the funnels have effectively mitigated critical clogging problems frequently encountered in density separation units. An experiment was conducted using sand-based sediment spiked with polyamide fragments to validate this method modification. Following a complete extraction protocol with the modification of separating funnels, the microplastic extraction efficiency from sediments was high with a 90% recovery rate. Based on these promising results, future studies should consider naturally diverse substrates, as recovery efficiency may be sediment-dependent. Two key adjustments to the glass separation funnels:•Removal of stopcocks•Use of silicone tubes and Mohr clamps to control sediment release.

Modelling selenium behavior in aquatic systems: a review of status, challenges, and opportunities.

Selenium (Se) is an essential element for aquatic organisms as well as humans. It can be toxic to organisms depending on its concentration and chemical speciation; thus, considerable efforts have been made to unravel the biogeochemical cycling of Se in aquatic systems. Mathematical models provide an important tool to better understand the fate of Se in different environment compartments. However, a comprehensive review of modeling Se in aquatic systems with current challenges and opportunities is missing. To fill this gap, we firstly summarize the processes governing Se cycling in aquatic systems, including particle adsorption and desorption, diffusion, biological uptake, redox reactions, and volatilization. Then, we critically review the available models, identifying the compartments modelled, environmental factors considered, and the Se species and geochemical processes used in each model, providing an assessment of their advantages and limitations. Data availability for modeling studies is investigated, highlighting how to better quantify the redox reactions, estimate of Se loadings, and mass balance. For the modeling of Se cycling in aquatic systems, the ability of the models to link sources to biota concentrations under a range of hydrodynamic conditions and with mechanistic representations of transport, transformation, and uptake processes is required. The majority of the current models can conduct this task; however, to better present the uptake processes of Se in the food web, two-way coupling of the Se cycling model with a food web model is recommended.

Microplastics as contaminants in the Brazilian environment: an updated review.

Microplastics have long been present in marine and terrestrial environments and have emerged in recent decades as a global environmental concern. This pollutant has been detected with increasing frequency in Brazilian territory and herein primarily highlights current information and developments about the quantity, distribution, techniques of identification, origins, and sources of microplastics and related pollutants in the Brazilian environment. We evaluated 79 publications from 2018 to December 2022, and some aspects can be highlighted: 27% of studies were published in the Journal Marine Pollution Bulletin; 22% of all studies were conducted in São Paulo city; and 52% of all microplastics found were collected from biota followed by sediment samples. According to the findings given here, microplastics in Brazilian habitats, which can reach concentrations of 4367 to 25,794 items m-2 in sediments, are becoming a serious problem in the Anthropocene age, and some topics regarding the open questions in this area were pointed out in this review.

Parabens as environmental contaminants of aquatic systems affecting water quality and microbial dynamics.

Among different pollutants of emerging concern, parabens have gained rising interest due to their widespread detection in water sources worldwide. This occurs because parabens are used in personal care products, pharmaceuticals, and food, in which residues are generated and released into aquatic environments. The regulation of the use of parabens varies across different geographic regions, resulting in diverse concentrations observed globally. Concentrations of parabens exceeding 100 µg/L have been found in wastewater treatment plants and surface waters while drinking water (DW) sources typically exhibit concentrations below 6 µg/L. Despite their low levels, the presence of parabens in DW is a potential exposure route for humans, raising concerns for both human health and environmental microbiota. Although a few studies have reported alterations in the functions and characteristics of microbial communities following exposure to emerging contaminants, the impact of the exposure to parabens by microbial communities, particularly biofilm colonizers, remains largely understudied. This review gathers the most recent information on the occurrence of parabens in water sources, as well as their effects on human health and aquatic organisms. The interactions of parabens with microbial communities are reviewed for the first time, filling the knowledge gaps on the effects of paraben exposure on microbial ecosystems and their impact on disinfection tolerance and antimicrobial resistance, with potential implications for public health.

Emerging micropollutants in aquatic ecosystems and nanotechnology-based removal alternatives: A review.

There is a significant concern about the accessibility of uncontaminated and safe drinking water, a fundamental necessity for human beings. This concern is attributed to the toxic micropollutants from several emission sources, including industrial toxins, agricultural runoff, wastewater discharges, sewer overflows, landfills, algal blooms and microbiota. Emerging micropollutants (EMs) encompass a broad spectrum of compounds, including pharmaceutically active chemicals, personal care products, pesticides, industrial chemicals, steroid hormones, toxic nanomaterials, microplastics, heavy metals, and microorganisms. The pervasive and enduring nature of EMs has resulted in a detrimental impact on global urban water systems. Of late, these contaminants are receiving more attention due to their inherent potential to generate environmental toxicity and adverse health effects on humans and aquatic life. Although little progress has been made in discovering removal methodologies for EMs, a basic categorization procedure is required to identify and restrict the EMs to tackle the problem of these emerging contaminants. The present review paper provides a crude classification of EMs and their associated negative impact on aquatic life. Furthermore, it delves into various nanotechnology-based approaches as effective solutions to address the challenge of removing EMs from water, thereby ensuring potable drinking water. To conclude, this review paper addresses the challenges associated with the commercialization of nanomaterial, such as toxicity, high cost, inadequate government policies, and incompatibility with the present water purification system and recommends crucial directions for further research that should be pursued.

The impact of riverine particles on the vertical velocities of large microplastics.

Microplastics interact with other suspended particles in aquatic systems, which may impact their environmental fate. Little is known about aggregation between suspended sediment and larger microplastics (1-5 mm), and how this impacts the vertical velocities of microplastics, although it was hypothesised these are size limited. Consumer items made of five common polymers: polypropylene (PP), high density polyethylene (HDPE), polyethylene terephthalate (PET), polyvinyl chloride (PVC) and polystyrene (PS), were fragmented by cryomilling and their vertical velocities (rising/settling) measured experimentally before and after 24-hours of aggregation with riverine particles. Microplastic size (microscopy), zeta potential and density (density gradient column) were measured, with aggregation quantified using microscopy. PP had an experimental density of 1052 kg·m-3, and sank in river water, although it is often stated as being buoyant based on literature density values. Aggregation occurred with all five polymers: 39 %-72 % of microplastics were observed to have sediment and/or organic particles adhered, depending on the polymer type. PVC had the least negative zeta potential, -8.0 ± 3.0, and showed a much higher number of adhered sediment particles than all other polymers: on average 4.55 particles, compared with <1.72 particles for other polymers. For four polymers, aggregation did not significantly change vertical velocities. However, PP particles showed a significantly slower settling velocity after aggregation: a decrease of 6.3 % based on mean averages, from 9.7 × 10-3 to 9.1 × 10-3 m·s-1. Theoretical calculations showed the amount of adsorbed sediment or biofilm required to induce a microplastic density change of ∼50 kg·m-3 was much higher than observed experimentally. Overall, this study indicates that the vertical velocities of larger microplastics are less influenced by interactions with natural particles than smaller microplastics.

Insights about levels and sources of organic pollution in an urbanized Amazon estuary (Belém, PA, Northern Brazil).

Amazon aquatic systems have been affected by organic pollution from urbanized regions. This study was conducted to determine the levels, sources, and distribution patterns of 16 polycyclic aromatic hydrocarbons (PAHs) and 6 steroid markers in surficial sediments from an important urbanized Amazon estuarine system (Belém, PA, Northern Brazil). Total PAH concentration (∑PAH) ranged from 878.2 to 9905.7 ng g-1, 3295.2 ng g-1 on average, suggesting a highly contaminated environment. PAH molecular ratios and statistical analysis indicated that PAH originated from a mixture of local sources emissions, mainly related to the combustion of fossil fuels and biomass. Coprostanol levels (maximum concentration = 292.52 ng g-1) could be compared to the mid-range reported in the literature. Studied stations, except for one, presented sterol ratio data indicating organic matter related to untreated sewage. Sterols indicative of sewage contamination showed a correlation with pyrogenic PAH amounts which are transported by the same channels where sewage is discharged.

Metal and semimetal loadings in sediments and water from mangrove ecosystems: A preliminary assessment of anthropogenic enrichment in São Tomé island (central Africa).

Mangroves act as buffer areas for marine systems, providing a barrier to contamination from continental sources by retaining metal pollutants. This study evaluates metal and semimetal contamination in the water column and sediments of four mangroves located on the volcanic island of São Tomé. Several metals had a widespread distribution, with occasional high concentrations, linked to potential sources of contamination. However, the two smaller mangroves, located in the northern part of the island, tended to have high metal concentrations. Arsenic and chromium concentrations were notably concerning, particularly if we consider this is an isolated and non-industrialized island. This work highlights the need for further assessments and a better understanding of processes and implications of metal contamination in mangroves. This assumes a particular relevance in areas that have specific geochemical compositions (i.e., volcanic origin) and in developing countries, where people often rely directly and heavily on resources obtained from these ecosystems.

Atmospheric Reactive Nitrogen Deposition from 2010 to 2021 in Lake Taihu and the Effects on Phytoplankton.

The effects of nitrogen deposition reduction on nutrient loading in freshwaters have been widely studied, especially in remote regions. However, understanding of the ecological effects is still rather limited. Herein, we re-estimated nitrogen deposition, both of wet and dry deposition, in Lake Taihu with monthly monitoring data from 2010 to 2021. Our results showed that the atmospheric deposition of reactive nitrogen (namely NH4+ and NO3-) in Lake Taihu was 4.94-11.49 kton/yr, which equaled 13.9%-27.3% of the riverine loading. Dry deposition of NH4+ and NO3- contributed 53.1% of the bulk deposition in Lake Taihu. Ammonium was the main component of both wet and dry deposition, which may have been due to the strong agriculture-related activities around Lake Taihu. Nitrogen deposition explained 24.9% of the variation in phytoplankton community succession from 2010 to 2021 and was the highest among all the environmental factors. Atmospheric deposition offset the effects of external nitrogen reduction during the early years and delayed the emergence of nitrogen-fixing cyanobacterial dominance in Lake Taihu. Our results implied that a decrease in nitrogen deposition due to a reduction in fertilizer use, especially a decrease in NH4+ deposition, could limit diatoms and promote non-nitrogen-fixing cyanobacterial dominance, followed by nitrogen-fixing taxa. This result was also applied to other shallow eutrophic lakes around the middle and lower reaches of the Yangtze River, where significant reduction of fertilizer use recorded during the last decades.

Legionella-Induced Hepatitis: A Case Report.

Legionnaires' disease is caused by a potentially life-threatening infection with the opportunistic Gram-negative bacilli species Legionella pneumophila, which is transmitted via inhalation or aspiration of water droplets. Legionnaires' commonly presents as atypical community-acquired pneumonia with accompanying diarrhea. Although hepatic and renal involvement are relatively uncommon, in this report, we present a case of Legionella pneumonia with acute hepatitis.

Occurrence and risks of microplastics in the ecosystems of the Middle East and North Africa (MENA).

The ubiquitous nature of microplastics (MPs) in nature and the risks they pose on the environment and human health have led to an increased research interest in the topic. Despite being an area of high plastic production and consumption, studies on MPs in the Middle East and North Africa (MENA) region have been limited. However, the region witnessed a research surge in 2021 attributed to the COVID-19 pandemic. In this review, a total of 97 studies were analyzed based on their environmental compartments (marine, freshwater, air, and terrestrial) and matrices (sediments, water columns, biota, soil, etc.). Then, the MP concentrations and polymer types were utilized to conduct a risk assessment to provide a critical analysis of the data. The highest MP concentrations recorded in the marine water column and sediments were in the Mediterranean Sea in Tunisia with 400 items/m3 and 7960 items/kg of sediments, respectively. The number of MPs in biota ranged between 0 and 7525 per individual across all the aquatic compartments. For the air compartment, a school classroom had 56,000 items/g of dust in Iran due to the confined space. Very high risks in the sediment samples (Eri > 1500) were recorded in the Caspian Sea and Arab/Persian Gulf due to their closed or semi-closed nature that promotes sedimentation. The risk factors obtained are sensitive to the reference concentration which calls for the development of more reliable risk assessment approaches. Finally, more studies are needed in understudied MENA environmental compartments such as groundwater, deserts, and estuaries.

On-field high-resolution quantification of the cobalt fraction available for bio-uptake in natural waters using antifouling gel-integrated microelectrode arrays.

We report the optimization, characterization, and validation of Adsorptive Square Wave Cathodic Stripping Voltammetry on antifouling gel-integrated microelectrode arrays for autonomous, direct monitoring of cobalt(II) metal species. Detection is accomplished by complexation with an added nioxime ligand. The limit of detection established for a 90 s accumulation time was 0.29 ± 0.01 nM in freshwater and 0.27 ± 0.06 nM in seawater. The microelectrode array was integrated in a submersible probe to automatically dose the complexing agent nioxime and realize an integrated sensing system. For the first time ever, the potentially bioavailable Co(II) fraction was determined in La Leyre River-Arcachon Bay continuum, enabling to evaluate the potential ecotoxicological impact of freshwater-carried Co(II) in the Arcachon Bay. The measured potentially bioavailable Co(II) concentrations were hazardous for aquatic biota along the continuum. The electrochemical Co(II) data were compared to ICP-MS data in various fractions to determine spatial Co(II) speciation.

Identification of nitrate sources of groundwater and rivers in complex urban environments based on isotopic and hydro-chemical evidence.

Groundwater and rivers in Chinese cities suffer from severe nitrate pollution. The accurate identification of nitrate sources throughout aquatic systems is key to the water nitrate pollution management. This study investigated nitrogen components of groundwater for twelve years and analyzed the sources of nitrate in the aquatic system based on dual isotopes (δ15N-NO3- and δ18O-NO3-) in the city of Nanjing, a core city of the Yangtze River Delta region, China. Our results showed that the ratio of nitrate to the sum of ammonia and nitrate in groundwater show an increasing trend during 2010-2021. The nitrate concentration was positively correlated with the proportion of cultivated land and negatively correlated with the proportion of forest land in the buffer zone. The relationship between Cl- and NO3-/ Cl- showed that agriculture and sewage sources increased during 2010-2015, sewage sources increased during 2016-2018, agriculture sources increased during 2019-2021. Manure and sewage were the primary sources of groundwater nitrate (72 %). There was no significant difference between the developed land (78 %), cultivated land (69 %), and aquaculture area (72 %). This indicates that dense population and intensive aquaculture in the suburbs have a significant impact on nitrate pollution. The contributions of manure and sewage to the fluvial nitrate sources in the lower reaches of the Qinhuai River Basin were 61 %. The non-point sources, including groundwater N (39 %) and soil N (35 %), were 74 % over the upper reaches. This study highlights the necessity of developing different N pollution management strategies for different parts of highly urbanized watersheds and considers groundwater restoration and soil nitrogen management as momentous, long-term tasks.

Metal(oid)s content in High-Andean aquatic systems of the Atacama Desert, Chile: environmental assessment of extreme ecosystems.

The high-Andean mountain of northern Chile host numerous water systems that is in risk due to increased mining activities. Total and dissolved Cd, Cr, Cu, Hg, Ni, Pb, Se, and Zn in water, and Cd, Cu, Fe, Ni, Pb, Zn, As, Mo, Al, and V in sediments of 21 aquatic systems (rivers, saline lakes, salt flats), were studied. The presence of Pb, Cd, and As in waters and sediments could be explained, in part, by mining activities. Waters are not suitable for human consumption or irrigation due to high content of Cu and As and high pH that exceed Chilean water quality guideline values. The use of different background reference values influences noticeably the conclusion related to environmental quality of sediments, measured with different environmental indexes. The local geological background suggest that Cd, Mo, Pb, and As generate some degree of contamination, while the use of unpolluted systems as background suggest that all metals measured in sediments represent a low contamination risk. The use of background values of local unpolluted systems seems to be more realistic than geological formation or Upper Continental Crust reference values to assess the environmental condition. The ecological risk assessment suggests that Cd and As are threat for communities living in these aquatic environments. However, these systems support abundant wildlife, developing unique extreme ecosystems with great potential for non-consumptive use such as special interest tourism and conservation.

Hydrodynamic and geochemical controls on soil carbon mineralization upon entry into aquatic systems.

Erosion is the most widespread form of soil degradation and an important pathway of carbon transfer from land into aquatic systems, with significant impact on water quality and carbon cycle. However, it remains debatable whether erosion induces a carbon source or sink, and the fate of eroded soil carbon in aquatic systems remains poorly constrained. Here, we collect 41 representative soils from seven erosion-influenced basins and conduct microcosm simulation experiments to examine the fate of soil carbon under three different scenarios. We showed that soil carbon mineralization was generally promoted (by up to 10 times) in water under turbulence relative to in soils, but suppressed under static conditions upon entering into aquatic systems. Moreover, the enhancement of mineralization in turbulent systems is primarily related to soil aggregate content, while suppression in static systems positively relates to macromolecule abundance, indicating that soil geochemistry affects the magnitude of hydrodynamic effects on carbon mineralization. Random forest model further predicts that erosion may induce significant carbon sources in basins dominated by turbulent waters and aggregate-rich soils. Our findings demonstrate hydrodynamic and geochemical controls on soil carbon mineralization upon delivery into aquatic systems, which is a non-negligible part of the boundless carbon cycle and must be considered when making region-specific conservation strategies to reduce CO2 emissions from inland waters.