Efficient photocatalytic H2O2 production and photodegradation of RhB over K-doped g-C3N4/ZnO S-scheme heterojunction.

Designing efficient dual-functional catalysts for photocatalytic oxygen reduction to produce hydrogen peroxide (H2O2) and photodegradation of dye pollutants is challenging. In this work, we designed and fabricated an S-scheme heterojunction (g-C3N4/ZnO composite photocatalyst) via one-pot calcination of a mixture of ZIF-8 and melamine in the KCl/LiCl molten salt medium. The KCN/ZnO composite produced 4.72 mM of H2O2 within 90 min under illumination (with AM 1.5 filter), which is almost 1.3 and 7.8 times than that produced over KCN and ZnO, respectively. Simultaneously, the KCN/ZnO also showed excellent photodegradation performance for the dye pollutants (Rhodamine B, RhB), with a removal rate of 92 % within 2 h. The apparent degradation rate constant of RhB over KCN/ZnO was approximately 5-8 times that of KCN and ZnO. In the photocatalytic process, photo-generated holes and superoxide radicals are the main active species. Oxygen (O2) was mainly reduced to produce H2O2 via a two-electron (2e-) pathway with superoxide radicals as intermediates and the 2e- oxygen reduction reaction selectivity of KCN/ZnO was close to 69.82 %. Photo-generated holes are mainly responsible for the degradation of RhB. Compared with pure KCN and ZnO, the enhanced photocatalytic activity of the KCN/ZnO composite is mainly attributed to the following aspects: 1) larger specific surface area and pore volume is beneficial to expose more active sites; 2) stronger light harvesting ability and red-shifted absorption edge bestow the compound a stronger light utilization efficiency; 3) the construction of S-scheme heterostructure between KCN and ZnO improve the photogenerated electron-hole pairs separation ability and bestow photogenerated carriers a higher redox potential.

Constructing homo/hetero-nuclear carbon and oxygen atoms co-doped graphitic carbon nitride assisted by ionic liquid for photothermal synergistic catalytic oxidation of cyclohexane.

The adoption of photothermal synergistic catalysis for cyclohexane oxidation can balance the advantages of high conversion of thermal catalysis and high selectivity of photocatalytic technology to achieve better catalytic performance. Here, we prepared functional carbon nitride (BCA-CN) by self-assembly strategy of ionic liquid [Bmim]CA (1-Butyl-3-methylimidazole citrate) with melamine and cyanuric acid utilizing abundant elements and anionic/cationic hydrogen bonding interactions. The introduction of [Bmim]CA embeds C-C (carbon and carbon band) and C-O-C (ether bond) structures into graphitic carbon nitride (g-C3N4) framework, significantly improving light absorption capacity and migration of photo generated charge carriers. Compared to g-C3N4, both BCA-CN increases cyclohexane conversion and KA oil (the mixture of cyclohexanol and cyclohexanone) selectivity by 1.3 times under photothermal catalysis. The surface reactions are facilitated by changing adsorption sites of cyclohexane to increase adsorption energy and obtaining more hydroxyl radicals and superoxide radicals. Furthermore, the enhanced selectivity is attributed to the difficulty in generating cyclohexanone radicals. This work offers the reference scheme for the development of efficient photothermal catalysts in the selective oxidation of cyclohexane.

A comparison increasing the photodegradation power of a Ag/g-C3N4 /CoNi-LDH nanocomposite: Photocatalytic activity toward water treatment.

For environmental applications, it is crucial to rationally design and synthesize photocatalysts with positive exciton splitting and interfacial charge transfer. Here, a novel Ag-bridged dual Z-scheme Ag/g-C3N4/CoNi-LDH plasmonic heterojunction was successfully synthesized using a simple method, with the goal of overcoming the common drawbacks of traditional photocatalysts such as weak photoresponsivity, rapid combination of photo-generated carriers, and unstable structure. These materials were characterized by XRD, FT-IR, SEM, TEM UV-Vis/DRS, and XPS to verify the structure and stability of the heterostructure. The pristine LDH, g-C3N4, and Ag/g-C3N4/CoNi-LDH composite were investigated as photocatalysts for water remediation, an environmentally motivated process. Specifically, the photocatalytic degradation of tetracycline was studied as a model reaction. The performance of the supports and composite catalyst were determined by evaluating both the degradation and adsorption phenomenon. The influence of several experimental parameters such as catalyst loading, pH, and tetracycline concentration were evaluated. The current study provides important data for water treatment and similar environmental protection applications.

Advancing antibiotic detection and degradation: recent innovations in graphitic carbon nitride (g-C3N4) applications.

The uncontrolled release of antibiotics into the environment would be extremely harmful to human health and ecosystems. Therefore, it is in urgent need to monitor the environment and promote the detection and degradation of antibiotics to the relatively harmless by-products to a feasible extent. Graphitic carbon nitride (g-C3N4) is a non-metallic n-type semiconductor that can be used for the antibiotic detection and degradation due to its easy synthesis process, excellent chemical stability and unique optical properties. Unfortunately, the utilization of visible light, electron-hole recombination and electron conductivity have hindered its potential applications in the fields of photocatalytic degradation and electrochemical detection. Although previous publications have highlighted the diverse modification methods for the g-C3N4-based materials, the underlying structure-performance relationships of g-C3N4, especially for the detection and degradation of antibiotics, remains to be further explored. In view of this, the current review centered on the recent progress in the modification techniques of g-C3N4, the detection and degradation of antibiotics using the g-C3N4-based materials, as well as the potential antibiotic degradation mechanisms of the g-C3N4-based materials. Additionally, the underlying applications of the g-C3N4-based materials for antibiotic detection and degradation were also prospected. This review would provide a valuable research foundation and the up-to-date information for the g-C3N4-based materials to combat antibiotic pollution in the environment.

Oxygen Vacancies Regulated S-Scheme Charge Transport Route in BiVO4-OVs/g-C3N4 Heterojunction for Enhanced Photocatalytic Performance.

Oxygen vacancies (OVs) are widely considered as active sites in photocatalytic reactions, yet the crucial role of OVs in S-scheme heterojunction photocatalysts requires deeper understanding. In this work, OVs at hetero-interface regulated S-scheme BiVO4-OVs/g-C3N4 photocatalysts are constructed. The Fermi-level structures of BiVO4 and g-C3N4 lead to a redistribution of charges at the heterojunction interface, inducing an internal electric field at the interface, which tends to promote the recombination of photogenerated carriers at the interface. Importantly, the introduction of OVs induces defect electronic states in the BiVO4 bandgap, creating indirect recombination energy level that serves as crucial intermediator for photogenerated carrier recombination in the S-scheme heterojunction. As a result, the photocatalytic degradation rate on Rhodamine B (RhB) and tetracyclines (TCs) for the optimal sample is 10.7 and 11.8 times higher than the bare one, the photocatalytic hydrogen production rate is also improved to 558 µmol g-1 h-1. This work shows the importance of OVs in heterostructure photocatalysis from both thermodynamic and kinetic aspects and may provide new insight into the rational design of S-scheme photocatalysts.

Construction of S-scheme g-C3N4/PbTiO3 heterojunction and its highly efficient photocatalytic degradation of organic pollutants under simulated sunlight.

This study successfully synthesized a composite photocatalyst g-C3N4/PbTiO3 through hydrothermal and calcination methods using PbTiO3 and g-C3N4. The catalyst was characterized by XRD, FTIR, Raman, XPS, SEM, TEM, UV-vis DRS, PL, and other techniques. The results indicate that the composite photocatalyst exhibits efficient electron transfer, enhanced light absorption, effective separation and utilization of photogenerated electron-hole pairs, demonstrating superior photocatalytic activity. Under simulated sunlight, the removal efficiency of methyl blue (MB) with an initial concentration of 10 mg/L reaches 93.0% after 120 min. After five cycles, the degradation efficiency of MB is 79.2%, still maintaining 85% of the initial catalytic activity. The pH values in the range of 4.0-7.0, inorganic anions, and water quality have a minimal impact on the photocatalytic degradation of MB. Additionally, the composite photocatalyst exhibits strong removal capabilities for other pollutants, such as tetracycline. Therefore, the prepared catalyst demonstrates good feasibility for practical applications. Free radical quenching experiments indicate that hydroxyl radicals (·OH) are the primary active groups in the photocatalytic degradation of MB. Based on this, a photocatalytic mechanism involving a S-scheme heterojunction has been proposed. This study provides new insights into preparing PbTiO3 composite semiconductors and constructing novel S-scheme heterojunctions.

Photocatalytic activity of self-heterojunctioned intermediate phases in HCl protonated and HNO3 deconjugated g-C3N4 nanostructures.

This research involved the different acid-treatment conditions of graphitic carbon nitride and its modified nanostructures through thermal polycondensation of urea at various temperatures. X-ray diffraction patterns revealed that processing at a lower temperature than 500 °C resulted in melem and its derivatives, indicating incomplete transformation of urea to g-C3N4. However, treatment at higher temperatures and the HCl acid treatment led to the formation and expansion of g-C3N4 networks, as evidenced by notable differences in peak intensities observed in their Fourier-transform infrared and Raman spectra. Scanning electron microscopy analysis illustrated a transition from the granular morphology of melamine to the layered structure characteristic of g-C3N4. The nanoparticle morphology observed in the HNO3 acid treatment sample was attributed to the deconjugation of nanosheets through the highly oxidative acid medium. The most suitable photocatalytic activity for Methylene Blue (MB) degradation under UV and visible light illumination was observed for the samples prepared at 550 °C and HCl post-processed nanostructures. It is proposed that the enhanced photocatalytic activity observed in these samples is most likely attributed to the reduced recombination of photogenerated charge carriers facilitated by heterojunctions formed between different intermediate phases. These findings highlight the potential of modified g-C3N4 and its derivatives as promising photocatalytic materials for water purification applications.

Micron-Scale Vertical MoS2/Porous g-C3N4 Piezocatalyst via a Precursor's Supramolecular Self-Template Architecture: Degradation and Hydrogen Evolution.

Piezocatalysis can effectively harvest various kinds of mechanical energy with high entropy from the environment and drive some redox reactions without light irradiation, where MoS2- and g-C3N4-based piezocatalysts are recent research hotspots. This study constructs an architecture of ordered melamine hydrochloride-cyanuric acid/MoO42- supramolecular precursor via self-assembly, serving as a self-template for in situ tight growth of vertically aligned micron-scale MoS2 on porous foam-like g-C3N4(CMx) under S vapor with a bioinspired rooting and sprouting-like process. Experiments, DFT calculations, and finite element simulations collectively confirm the high piezoresponse of the CMx with high exposure of active sites and enhanced mechanical energy collection. The vertical interfaces and built-in electric fields in the composite induce efficient charge carrier separation and transfer. The optimized CM0.77 efficiently degrades various organic dyes and antibiotic under dark ultrasound [rhodamine B (RhB): 0.47 s-1, methyl orange (MO): 0.05 s-1, methylene blue (MB): 0.21 s-1, and tetracycline hydrochloride (TC): 0.03 s-1] and achieves hydrogen evolution (2431 µmol·g-1·h-1). Under simulated water flow (10 L/min), the expanded CM0.77/Al2O3 porous foam ceramic (CM/alumina ceramic) purifier device degrades 95% of 400 mL of RhB within 25 min. The developed ordered vertical MoS2/g-C3N4 piezocatalyst demonstrates rapid pollutant degradation and efficient hydrogen evolution under water flow and ultrasound, providing new insights for constructing multidimensional piezoelectric composites for environmental remediation and clean energy production.

Enhanced Flexible Piezoelectric Nanogenerators Using Ethanol-Exfoliated g-C3N4/PVDF Composites via 3D Printing for Self-Powered Applications.

This study presents the development of flexible piezoelectric nanogenerators (PENGs) utilizing graphitic carbon nitride (g-C3N4) nanoflakes (CNNFs) and polyvinylidene fluoride (PVDF) composites fabricated via the direct ink writing (DIW) 3D printing method. A novel approach of synthesizing CNNFs using the ethanol exfoliation method was demonstrated, which significantly reduces preparation time and cost compared to traditional acid exfoliation. The CNNFs are incorporated into PVDFs at varying weight percentages (5, 7.5, 10, and 15 wt.%) to optimize the ß-phase content and piezoelectric properties. Characterization techniques including XRD, FTIR, and FESEM confirm the successful synthesis and alignment of nanoflakes inside the PVDF matrix. The film with 7.5% CNNF achieves the highest performance, exhibiting a peak output voltage of approximately 6.5 V under a 45 N force. This study also explores the effects of UV light exposure. Under a UV light, the film exhibits an output voltage of 8 V, indicating the device's durability and potential for practical applications. The fabricated device showed significant voltage outputs during various human motions, confirming its suitability for wearable self-powered IoT applications. This work highlights the efficacy of the ethanol exfoliation method and the DIW printing technique in enhancing the performance of flexible PENGs.

Preparation strategies, properties highlights, and emerging applications across environmental, biological, and energy industries of silver-loaded graphitic carbon nitride: A critical review.

In light of escalating environmental pollution and tremendous energy shortage, the development of multifunctional materials with diverse applications across biomedical and energy production platforms has become imperative. Among this domain, nanostructured heterogeneous composites based on semiconductors are exclusively promising owing to their distinct configurations. Notably, graphitic carbon nitride (g-C3N4 (CN)) has drawn substantial interest as a sustainable candidate with surface functionality, electron-rich nature, and interconnected conjugation system along the polymeric matrix. To address the remaining limitations in sub-optimal visible light absorption and rapid charge recombination, the decoration of plasmonic metals, particularly silver (Ag) nanostructures, on bare CN has been reported to induce considerable synergistic promotions. This review highlights the major advancements and challenges in designing silver-loaded graphitic carbon nitride (Ag/CN (ACN)). Fundamentals in typical synthetic strategies, such as hydrothermal, co-precipitation, or chemical reduction, for ACN heterostructures are summarized. The appearance of Ag also influences the inherent properties of CN, as emphasized through alterations in structural as well as electronic behaviors in many studies. We expect that this study can deepen insights into multiple extending applications of ACN regarding environmental, biological, and energy industries, thanks to its favorable well-rounded attributions.

Characterization of exopolysaccharide/potato starch nanocomposite films loading g-C3N4 and Ag and their potential applications in food packaging.

The interest in nanocomposite films incorporating edible ingredients and active nanoparticles has surged due to their potential to enhance food quality and prolong shelf-life. This research focused on developing innovative exopolysaccharides (EPS)/potato starch (PS) nanocomposite films integrated with g-C3N4 and AgNO3. Extensive analysis was conducted to assess the microstructure, physical attributes and antimicrobial properties of these films. Fourier transform infrared (FT-IR) analysis revealed electrostatic and hydrogen bonding interactions within the film components. X-ray diffraction (XRD) and X-ray photoelectron spectrometer (XPS) data indicated a high level of compatibility among EPS, PS, g-C3N4, and AgNO3, with no new absorption peaks or characteristic signals of C3N4 and Ag appearing in the nanocomposite films patterns. The thickness, water solubility and water vapor permeability (WVP) of the EPS-PS-C3N4-Ag nanocomposite film increased due to the addition of g-C3N4, reached 0.31 ±â€¯0.03 nm, 36.61 ±â€¯1.76 % and 1.42 ±â€¯0.34 × 10-10 g-1 s-1 Pa-1, respectively. While transparency, swelling degree, and oxygen permeability (OP) significantly decreased, reached 26.18 ±â€¯2.38 %, 63.01 ±â€¯2.51 % and 41.98 ±â€¯1.28 %, respectively. Scanning electron microscopy (SEM) and atomic force microscope (AFM) images depicted an augmented roughness and porosity on the film surface upon integration of g-C3N4 and AgNO3. Moreover, the EPS-PS-C3N4-Ag nanocomposite film displayed enhanced mechanical strength due to the presence of g-C3N4. The melting temperature (Tm) of EPS-PS-C3N4-Ag nanocomposite film was 313.3 °C, the removal rates of DPPH and ABTS was 66.11 ±â€¯2.87 % and 45.09 ±â€¯1.23 % respectively. Significant inhibition of microbial growth was observed in film containing g-C3N4 and AgNO3, which demonstrated no toxicity towards NIH-33 cells, suggesting their potential application as promising active packaging material for food preservation.

Green ternary composite of graphitic carbon nitride/TiO2/ polyorthoanisidine for the enhanced photocatalytic treatment of Direct Red 28 for industrial water treatment solutions.

Industrial dye effluent causes significant risks to the environment. The present study was focused on photocatalytic degradation of the dye Direct Red 28 using a ternary composite of graphitic carbon nitride, TiO2, and polyorthoanisidine (g-C3N4/TiO2/POA), prepared by in-situ oxidative polymerization o-anisidine. The synthesized composite g-C3N4/TiO2/POA properties were characterized using different analytical techniques. X-ray diffraction (XRD) results revealed the prominent pattern of TiO2 and g-C3N4 in the composite peak at 2θ° while Fourier transform infrared (FTIR) results provided the confirmation peaks for g-C3N4/TiO2/POA and POA at 1,110 cm-1 and 1,084 cm-1 for C-O-C ether. Scanning electron microscopy (SEM) demonstrated an increase in the average size of the composite up to 428 nm. The energy-dispersive X-ray spectroscopy (EDX) spectrum provided the weight percentages of the C, O, and Ti in the composite were 8.5%, 45.69%, and 45.81%, respectively. The photocatalytic degradation of Direct Red 28 dye under UV irradiation using a composite showed that 86% Direct Red 28 dye was degraded by a 30 mg/L dose of g-C3N4/TiO2/POA in 240 min at pH 2. After four consecutive cycles, the utilized composite showed 79% degradation of Direct Red 28, demonstrating the stability and effectiveness of the g-C3N4/TiO2/POA photocatalyst. The high reusability and efficiency of the g-C3N4/TiO2/POA composite are due to increased light absorption range and reduced e-/h+ recombination rate in the presence of g-C3N4 and POA.

Quantitative Spectroscopic Analysis of Surface-Reaching Photoexcited Holes in g-C3N4/TiO2 Z-Scheme Heterojunctions.

The Z-scheme heterojunction has been demonstrated to be effective in tuning the photocatalytic performance of photocatalysts. However, there is still a lack of quantitative and in-depth research on how the Z-scheme heterojunction affects the concentration of surface-reaching photoexcited charges. Here, by combining time-resolved spectroscopies and kinetic analysis, the concentration of surface-reaching photoholes (Ch+(surf)) within g-C3N4/TiO2 Z-scheme heterojunctions was quantitatively analyzed for the first time. Quantitative measurements reveal that Ch+(surf) of the prepared Z-scheme photocatalysts is highly dependent on the g-C3N4 content and the induced Z-scheme heterojunctions at the g-C3N4/TiO2 interface. Encouragingly, we found that a properly engineered Z-scheme heterojunction with close coupling of g-C3N4 and TiO2 can significantly increase the Ch+(surf), leading to nearly a 1.7-fold increase compared with pristine TiO2 samples. Furthermore, a distinct hole trap state-mediated Z-scheme charge transfer mechanism was uncovered in which the intrinsic interface defects at the g-C3N4/TiO2 junction act as hole traps, accelerating interface electron-hole recombination, thereby boosting spatial charge separation and ultimately enriching the Ch+(surf). This work provides insights into understanding and controlling electron pathways and Ch+(surf) in Z-scheme photocatalysis, with implications for the screening of different types of direct Z-scheme photocatalysts.

Promising metal-free green heterogeneous catalyst for quinoline synthesis using Brønsted acid functionalized g-C3N4.

Rationally designing distinct acidic and basic sites can greatly enhance performance and deepen our understanding of reaction mechanisms. In our current investigation, we studied the utilization of Brønsted acid sites within layered graphitic carbon nitride (g-C3N4) for the first time to enhance the rate of the Friedländer synthesis. The structural and surface analyses confirm the effective integration of -COOH and -SO3H groups into the g-C3N4 lattice. The surface-functionalized g-C3N4-CO-(CH2)3-SO3H exhibits a remarkable acceleration in quinoline formation, surpassing previously mentioned catalysts, and demonstrating notable recyclability under optimized mild reaction conditions. The heightened reaction rate observed over g-C3N4-CO-(CH2)3-SO3H is attributed to its elevated surface acidity. By probing the Friedländer reaction mechanism through surface characterization, examination of reaction intermediates, and investigation of substrate scope, we elucidate the pivotal role of Brønsted acid sites. This study constitutes a comprehensive exploration of metal-free heterogeneous catalysts for the Friedländer reaction, offering a unique contribution to the field.

Photoirradiation-enhanced behavior via morphological manipulation of CoFe2O4/g-C3N4 heterojunction for supercapacitor and CO2 reduction.

Regulating the morphology of graphitic carbon nitride (g-C3N4, CN) and constructing CoFe2O4/g-C3N4 (CFO/CN) heterojunctions were adopted in the photocatalytic energy storage and photocatalytic CO2 reduction (PCR). CFO/CNS had outstanding light response ability, while CFO/CNT possessed excellent charge transfer ability. Consequently, CFO/CNT electrode exhibited the highest specific capacitance without light, CFO/CNS electrode showed the most obvious photo-enhanced capacitance behavior with an increase by 21.05 % under light. This was ascribed to the generation and separation of photo-generated carriers, promoting oxidation/reduction reactions. And in PCR, the electron consumption rates of four CFO/CN heterojunctions were CFO/CNT > CFO/BCN > CFO/MCN > CFO/CNS. CFO/CNT presented the highest photocatalytic activity, attributing to the strong redox ability and photo-enhanced electron transfer. This strategy of utilizing CFO/CN heterojunctions to construct photo-enhanced supercapacitor electrodes and photocatalytic CO2 reduction catalysts provided new ideas for energy conversion and storage.

Antifouling characteristics and mechanisms in visible-light photocatalytic membrane bioreactor based on g-C3N4 modified membrane.

A novel visible-light photocatalytic membrane bioreactor (R3) was constructed for membrane fouling control and effluent quality improvement. Specially, g-C3N4 modified membrane was evaluated for the performance of synergistic separation and photocatalysis. Another two parallel reactors, MBRs with ceramic membrane (R1) and g-C3N4 membrane in dark condition (R2), were operated synchronously for comparison. A satisfactory effluent quality was obtained in R3 with COD and NH4+-N around 22.0 mg/L and 1.02 mg/L during 60-day operation, which was superior to R1 (27.8, 1.42 mg/L) and R2 (29.9, 2.26 mg/L). The thickness of cake layer on membranes in R3 (2.46 µm) was thinner than R1 (3.52 µm) and R2 (4.97 µm) after operation, indicating the introduction of visible light could effectively mitigate membranes fouling. Moreover, microorganism community analysis revealed that visible light increased the relative abundance of Bacteroidetes and Chryseolinea, which not only enhanced the activity of microorganisms in metabolizing organic nutrients, but also improved the transfer and utilization of photogenerated electrons on the semiconductor-microorganism interface. The active aromatic protein metabolism and the upregulated related enzymes further demonstrated the synergistic effect of photocatalysis and microbial communities on the membrane fouling mitigation. This work provides a novel application of photocatalysis into antibiofouling effect in MBRs, and opens a strategy for bacteria inactivation and foulants removal with eco-friendly solar energy.

Transesterification of waste cooking oil for biodiesel production using alkaline-modified graphitic carbon nitride heterogeneous catalyst.

Developing efficient, stable, cost-effective, and environmentally benign heterogeneous catalysts for transesterification is highly required for sustainable biodiesel production. The present study explores the biodiesel production from waste cooking oil (WCO) using graphitic carbon nitride (g-C3N4) and its alkaline-modified nanocatalyst. The catalysts were characterised by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy Dispersive X-ray spectroscopy (EDS), and Fourier transform infrared spectroscopy (FTIR). From the XRD analysis, crystalline sizes of g-C3N4 and alkaline g-C3N4 were found to be 26 and 29 nm, respectively. Transesterification of WCO was carried out at 60 °C for a reaction time of 2 h using 2 wt.% of g-C3N4 and alkaline g-C3N4. Transesterification reaction catalysed by alkaline-modified g-C3N4 was found with a higher yield of biodiesel (89%) than the biodiesel yield (78%) with transesterification reaction catalysed by g-C3N4. The recyclability of both catalysts was also evaluated by reusing them for up to the 5th cycle. The obtained biodiesel was analyzed by using FTIR and GC-MS. The synthesised biodiesel was found to have significant level of monounsaturated fatty acids and saturated fatty acids, which make it usefuel for use as fuel. Some physicochemical properties of the obtained biodiesel were also calculated and found appropriate as per the American Society for Testing and Materials (ASTM) standards. With high reusability and good catalytic activity, the synthesised alkaline-modified g-C3N4 can be employed as a viable option for biodiesel production from WCO.

Visible-light-driven selective cleavage of lignin C-C bonds on the TiO2@g-C3N4heterostructured photocatalyst.

The selective cleavage of lignin C-C bonds is a highly sought-after process with the goal of obtaining low-molecular-weight aromatic chemicals from renewable resources. However, it remains a challenging task to achieve under mild conditions. Photocatalysis is a potentially promising approach to address this issue, but the development of efficient photocatalysts is still in progress. In this study, we introduce the heterostructured TiO2@g-C3N4photocatalyst for the development of a visible light photocatalytic procedure for the selective cleavage of lignin C-C bonds under mild conditions. The photocatalyst displays favourable visible light absorption, efficient charge separation efficiency, and promising reusability. A typicalß-O-4 dimer model, 2-phenoxy-1-phenylethanol, was effectively (96.0% conversion) and selectively (95.0 selectivity) cleaved under visible light at ambient conditions. This photocatalytic procedure was also effective when subjected to solar irradiation or other lignin dimer models withß-O-4 orß-1 linkages. This reaction occurred through a Cß-centred radical intermediate and a six-membered transition state with photogenerated holes as the primary active species. The Cα-OH oxidative dehydrogenation of the substrate could also take place but was a relatively minor route. This study provides a new photocatalytic procedure for visible-light-driven lignin valorisation and sheds light on the design of high-performance nanocomposite photocatalysts for C-C bond cleavage.

Photocatalytic Reforming of Ethanol in the Liquid Phase Using a Ternary Composite of Rh/TiO2/g-C3N4 as a Catalyst.

Photocatalytic reforming of ethanol provides an effective way to produce hydrogen energy using natural and nontoxic ethanol as raw material. Developing highly efficient catalysts is central to this field. Although traditional semiconductor/metal heterostructures (e.g., Rh/TiO2) can result in relatively high catalyst performance by promoting the separation of photoinduced hot carriers, it will still be highly promising to further improve the catalytic performance via a cost-effective and convenient method. In this study, we developed a highly efficient photocatalyst for ethanol reformation by preparing a ternary composite structure of Rh/TiO2/g-C3N4. Hydrogen is the main product, and the reaction rate could reach up to 27.5 mmol g-1 h-1, which is ∼1.41-fold higher than that of Rh/TiO2. The catalytic performance here is highly dependent on the wavelength of the light illumination. Moreover, the photocatalytic reforming of ethanol and production of hydrogen were also dependent on the Rh loading and g-C3N4:TiO2 ratio in Rh/TiO2/g-C3N4 composites as well as the ethanol content in the reaction system. The mechanism of the enhanced hydrogen production in Rh/TiO2/g-C3N4 is determined as the improvement in the separation of photoinduced hot carriers. This work provides an effective photocatalyst for ethanol reforming, largely expanding its application in the field of renewable energy and interface science.

A review on recent advances in g-C3N4-MXene nanocomposites for photocatalytic applications.

The solutions for environmental remediation and renewable energy generation have intensified the exploration of efficient photocatalytic materials. Recently, the composites of g-C3N4and MXene have gained considerable interest for their potential applications in photocatalysis. In the g-C3N4-MXene composite, the g-C3N4possesses unique physical, chemical, and optical properties to increase visible light absorption. At the same time, MXene improves conductivity, adsorption of reactant molecules or the active sites, and charge transfer properties. Combining the unique physico-chemical properties of MXene and g-C3N4, the resulting composite exhibits superior photo-responsive behavior and is critical in photocatalytic reactions. Furthermore, the g-C3N4-MXene composite exhibits stability and recyclability, making it a promising candidate for sustainable and scalable photocatalytic material in environmental remediation. This review offers an in-depth analysis of the development and design of g-C3N4-MXene composites through diverse synthesis procedures and a comprehensive analysis of their application in carbon dioxide (CO2) reduction, photocatalytic degradation, water splitting processes, mainly hydrogen (H2) generation, H2O2production, N2fixation, and NOxremoval. The charge transfer mechanism of g-C3N4-MXene composite for photocatalytic application has also been discussed. This review provides insights into the photocatalytic capabilities of g-C3N4-MXene composites, showing their potential to address current environmental challenges and establish a robust foundation for sustainable energy conversion technologies.