Atomically dispersed ternary FeCoNb active sites anchored on N-doped honeycomb-like mesoporous carbon for highly catalytic degradation of 4-nitrophenol.

In the last decades, 4-nitrophenol is regarded as one of highly toxic organic pollutants in industrial wastewater, which attracts great concern to earth sustainability. Herein, atomically dispersed ternary FeCoNb active sites were incorporated into nitrogen-doped honeycomb-like mesoporous carbon (termed FeCoNb/NHC) by a two-step pyrolysis strategy, whose morphology, structure and size were characterized by a set of techniques. Further, the catalytic activity and reusability of the as-prepared FeCoNb/NHC were rigorously examined by using 4-NP catalytic hydrogenation as a proof-of-concept model. The influence of the secondary pyrolysis temperature on the catalytic performance was investigated, combined by illuminating the catalytic mechanism. The resultant catalyst exhibited significantly enhanced catalytic features with a normalized rate constant (kapp) of 1.2 × 104 min-1g-1 and superior stability, surpassing the home-made catalysts in the control groups and earlier research. This study provides some constructive insights for preparation of high-efficiency and cost-effectiveness single-atom nanocatalysts in organic pollutants environmental remediation.

Encapsulating CoNi nanoparticles into nitrogen-doped carbon nanotube arrays as bifunctional oxygen electrocatalyst for rechargeable zinc-air batteries.

The high theoretical specific energy and environmental friendliness of zinc-air batteries (ZABs) have garnered significant attention. However, the practical application of ZABs requires overcoming the sluggish kinetics associated with oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Herein, 3D self-supported nitrogen-doped carbon nanotubes (N-CNTs) arrays encapsulated by CoNi nanoparticles on carbon fiber cloth (CoNi@N-CNTs/CFC) are synthesized as bifunctional catalysts for OER and ORR. The 3D interconnected N-CNTs arrays not only improve the electrical conductivity, the permeation and gas escape capabilities of the electrode, but also enhance the corrosion resistance of CoNi metals. DFT calculations reveal that the co-existence of Co and Ni synergistically reduces the energy barrier for OOH conversion to OH, thereby optimizing the Gibbs free energy of the catalysts. Additionally, analysis of the change in energy barrier during the rate-determining step suggests that the primary catalytic active center is Ni site for OER. As a result, CoNi@N-CNTs/CFC exhibits superior catalytic activity with an overpotential of 240 mV at 10 mA cm-2 toward OER, and the onset potential of 0.92 V for ORR. Moreover, utilization of CoNi@N-CNTs/CFC in liquid and solid-state ZABs exhibited exceptional stability, manifesting a consistent cycling operation lasting for 100 and 15 h, respectively.

Facile synthesis of hierarchical core-shell carbon@ZnIn2S4 composite for boosted photothermal-assisted photocatalytic H2 production.

Against the backdrop of energy shortage, hydrogen energy has attracted much attention as a green and clean energy source. In order to explore efficient hydrogen production pathways, we designed a composite photocatalyst with carbon-based core-shell photothermal-assisted photocatalytic system (Carbon@ZnIn2S4, denoted as C@ZIS). The well-designed catalyst C@ZIS composites demonstrated a photocatalytic hydrogen precipitation rate of 2.97 mmol g-1 h-1 even in the absence of the noble metal Pt co-catalyst. The incorporation of carbon-based core-shell photocatalysts into a photocatalytic reaction significantly affects the activity of the reaction by triggering a photothermal effect in the reaction solution. The results of the physicochemical experiments demonstrated that the carbon spheres in C@ZIS composite system could provide a greater number of active sites, thereby accelerating the electron transfer and separation efficiency, and thus enhancing the photocatalytic activity. The study presents an efficacious design concept for the development of efficacious carbon-based core-shell photothermal-assisted photocatalysts, which is anticipated to facilitate the efficient conversion of solar energy to hydrogen energy.

Surface crystallized supramolecular to achieve highly dispersed ultrafine nano-palladium in-situ deposition to promote thermal/electrocatalytic reduction.

To promote the greening and economization of industrial production, the development of advanced catalyst manufacturing technology with high activity and low cost is an indispensable part. In this study, nitrogen-doped hollow carbon spheres (NHCSs) were used as anchors to construct a supramolecular coating formed by the self-assembly of boron clusters and ß-cyclodextrin by surface crystallization strategy, with the help of the weak reducing agent characteristics of boron clusters, highly dispersed ultra-small nano-palladium particles were in-situ embedded on the surface of NHCSs. The deoxygenation hydrogenation of nitroaromatics and the reduction of nitrate to ammonia were used as the representatives of thermal catalytic reduction and electrocatalytic reduction respectively. The excellent properties of the constructed Pd/NHCSs were proved by the probe reaction. In the catalytic hydrogenation of nitroaromatics to aminoaromatics, the reaction kinetic rate and activation energy are at the leading level. At the same time, the constructed Pd/NHCSs can also electrocatalytically reduce nitrate to high value-added ammonia with high activity and selectivity, and the behavior of Pd/NHCSs high selectivity driving nitrate conversion was revealed by density functional theory and in situ attenuated total reflection Fourier transform infrared (ATRFTIR) technique. These results all reflect the feasibility and superiority of in-situ anchoring ultra-small nano-metals as catalysts by surface crystallization to build a supramolecular cladding with reducing properties, which is an effective way to construct high-activity and low-cost advanced catalysts.

Rational construction of CQDs-based targeted multifunctional nanoplatform for synergistic chemo-photothermal tumor therapy.

Photothermal therapy combined with chemotherapy has shown great promise in the treatment of cancer. In this synergistic system, a safe, stable, and efficient photothermal agent is desired. Herein, an effective photothermal agent, carbon quantum dots (CQDs), was initially synthesized and then rationally constructed a folic acid (FA)-targeted photothermal multifunctional nanoplatform by encapsulating CQDs and the anticancer drug doxorubicin (DOX) in the liposomes. Indocyanine green (ICG), a near infrared (NIR) photothermal agent, approved by the U.S. Food and Drug Administration, was embedded in the bilayer membrane to further enhance the photothermal effects and facilitate the rapid cleavage of liposomes for drug release. Triggered by the NIR laser, this engineered photothermal multifunctional nanoplatform, not only exhibited an excellent performance with the photothermal conversion efficiency of up to 47.14%, but also achieved controlled release of the payloads. In vitro, and in vivo experiments demonstrated that the photothermal multifunctional nanoplatform had excellent biocompatibility, enhanced tumor-specific targeting, stimuli-responsive drug release, effective cancer cell killing and tumor suppression through multi-modal synergistic therapy. The successful construction of this NIR light-triggered targeted photothermal multifunctional nanoplatform will provide a promising strategy for the design and development of synergistic chemo-photothermal combination therapy and improve the therapeutic efficacy of cancer treatment.

Constructing nitrogen-doped graphene quantum dots embedded in CNT supported layered (Ni0.5Co0.5)3V2O8 self-supporting film for high-performance supercapacitor.

To improve the electrochemical performance of positive electrode materials, constructing graded nanostructures is a worthwhile approach. This study successfully synthesized nitrogen-doped graphene quantum dots (NGQD) modified (Ni0.5Co0.5)3V2O8 on a carbon nanotube (CNT) substrate to construct self-supporting electrodes for high-performance supercapacitors. The (Ni0.5Co0.5)3V2O8 nanosheets were successfully wrapped onto the CNT surface through a solution impregnation process, which increased the specific surface area and interlayer spacing of the material. Furthermore, the electrochemical properties of the electrode material underwent significant enhancement due to the synergistic interplay between metal ions and the numerous redox centers. The embedding of the NGQD enriched the materials with active sites and further improved its specific capacity without compromising the structure intergrity of the layer configuration. Using CNT as the substrate ensured the self-supporting nature of the electrode. Consequently, the (Ni0.5Co0.5)3V2O8/NGQD@CNT composite exhibits an ultra-high specific capacitance of 3018.2 F g-1 at 1 A g-1 and 2332 F g-1 at 10 A g-1. The asymmetric supercapacitor constructed with (Ni0.5Co0.5)3V2O8/NGQD@CNT and activated carbon (AC) presented an impressive energy density of 160.2 Wh kg-1 at a power density of 800 W kg-1. After 8000 charge-discharge cycles, the capacity retention rate was 78.5 %, with a Coulo mbic efficiency consistently above 98 %.

Integrating CoP/Co heterojunction into nitrogen-doped carbon polyhedrons as electrocatalysts to promote polysulfides conversion in lithium-sulfur batteries.

Lithium-sulfur (Li-S) batteries have garnered extensive research interest as one of the most promising energy storage devices due to their ultra-high theoretical energy density. However, the sluggish reaction kinetics, abominable shuttling effect and inferior cycling stability severely restrict its practical application. Herein, a multifunctional CoP/Co@NC/CNT heterostructure host material was elaborately designed and synthesized by integrating CoP/Co heterojunction, N-doped carbon hollow polyhedrons (NC) and carbon nanotubes (CNTs). Specifically, the CoP/Co heterojunction can reconfigure the local electronic structure, resulting in a synergistic effect that enhances adsorption capacity and catalytic activity compared to CoP and Co alone. Furthermore, the CNTs-grafted NC not only provides multi-dimensional pathways for rapid electron transport and ion diffusion, but also physically restricts the diffusion of polysulfides during charge-discharge processes. Owing to these advantages, the battery assembled with the CoP/Co@NC/CNT/S cathode yields an impressive discharge specific capacity of 1479.9 mAh g-1 at 0.1C, and excellent capacity retention of 793.7 mAh g-1 over 500 cycles at 2C (∼85.5 % of initial capacity). The rational integration of multifunctional heterostructures could provide an effective strategy for designing high-efficiency nanocomposite electrocatalysts to promote sulfur redox kinetics in Li-S batteries.

In-situ synthesis of heteroatom-doped hard carbon for sodium-ion batteries: Dual benefits for green energy and environment.

Heteroatom-doped carbon has been widely investigated as anode materials for sodium-ion batteries (SIBs). However, simplifying the preparation process and precisely controlling their microstructure to achieve excellent Na+ storage performance remain significant challenges. Therefore, in this study, high-performance N, P co-doped Na+ storage carbon anode electrode materials were prepared by one-step carbonization using N, P-rich Eichhornia crassipes (EC) as raw materials and systematically tested for their Na+ storage performance. The doping levels of N and P atoms as well as the spatial structure of the carbon material were adjusted by changing the carbonization temperature during the pyrolysis process. Among them, the anode material corresponding to 1300 °C (EC-PN1300) showed an excellent Na+ storage capacity of 336 ± 4 mAh g-1 (50 mA g-1) and excellent cycling stability (99.8 % retention after 2000 cycles). In addition, the Na+ storage mechanism of EC-PN1300 was systematically analyzed using galvanostatic intermittent titration (GITT), ex-situ XPS and in-situ Raman spectroscopy, providing accurate research directions for developing carbon anode electrode materials with superior electrochemical performance. This study not only provides some insights into the preparation of carbon anode materials in alkali metal batteries and the development of carbon materials in other fields, but also realizes the interaction between environmental protection and new energy development.

Hierarchical Bi2O3 nanosheets and ZIF-8 derived porous nitrogen-doped carbon fibers as novel assembled nanocomposites for high-performance flexible supercapacitors.

The unique design of the core-shell heterostructure is significant for obtaining electrode materials with excellent electrochemical properties. In this paper, porous carbon nanofibers (NPC@PPZ) embedded with N-doped porous carbon nanoparticles are used to construct flexible electrodes (NPC@PPZ@Bi2O3). Zeolite imidazole skeleton (ZIF)-8 and poly(methyl methacrylate) (PMMA) derived porous carbon fibers and Bi2O3 nanosheets, were utilized as the porous core and multilayer shell, respectively. The unique core and shell result in abundant pores and channels for fast ion transport and storage, high specific surface area, and additional electroactive sites. This perfect structural design enables the NPC@PPZ@Bi2O3 composite electrode to have excellent electrochemical performance. The results show that this electrode can obtain a high specific capacitance of 697 F g-1 at a current density of 1 A g-1 and a stable cycling performance at a high current density of 5 A g-1. The strategy developed in this study provides a new approach for the design and fabrication of flexible supercapacitors by electrostatic spinning combined with hierarchical porous structures.

Rational design of amorphous vanadium pentoxide and hollow porous carbon spheres hybrid for superior zinc-ion battery.

Aqueous zinc-ion batteries (AZIBs) are expected to be a promising large-scale energy storage system owing to their intrinsic safety and low cost. Nevertheless, the development of AZIBs is still plagued by the design and fabrication of advanced cathode materials. Herein, the amorphous vanadium pentoxide and hollow porous carbon spheres (AVO-HPCS) hybrid is elaborately designed as AZIBs cathode material by integrating vacuum drying and annealing strategy. Amorphous vanadium pentoxide provides abundant active sites and isotropic ion diffusion channels. Meanwhile, the hollow porous carbon sphere not only provides a stable conductive network, but also enhances the stability during charging/discharging process. Consequently, the AVO-HPCS exhibits a capacity of 474 mAh/g at 0.5 A/g and long-term cycle stability. Moreover, the corresponding reversible insertion/extraction mechanism is elucidated by ex-situ X-ray diffraction, X-ray photoelectron spectroscopy and transmission electron microscopy. Furthermore, the flexible pouch battery with AVO-HPCS cathode shows high comprehensive performance. Hence, this work provides insights into the development of advanced amorphous cathode materials for AZIBs.

Confining WS2 hierarchical structures into carbon core-shells for enhanced sodium storage.

The growing demand for clean energy has heightened interest in sodium-ion batteries (SIBs) as promising candidates for large-scale energy storage. However, the sluggish reaction kinetics and significant volumetric changes in anode materials present challenges to the electrochemical performance of SIBs. This work introduces a hierarchical structure where WS2 is confined between an inner hard carbon core and an outer nitrogen-doped carbon shell, forming HC@WS2@NCs core-shell structures as anodes for SIBs. The inner hard carbon core and outer nitrogen-doped carbon shell anchor WS2, enhancing its structural integrity. The highly conductive carbon materials accelerate electron transport during charge/discharge, while the rationally constructed interfaces between carbon and WS2 regulate the interfacial energy barrier and electric field distribution, improving ion transport. This synergistic interaction results in superior electrochemical performance: the HC@WS2@NCs anode delivers a high capacity of 370 mAh g-1 at 0.2 A/g after 200 cycles and retains261 mAh g-1 at 2 A/g after 2000 cycles. In a full battery with a Na3V2(PO4)3 cathode, the Na3V2(PO4)3//HC@WS2@NC full-cell achieves an impressive initial capacity of 220 mAh g-1 at 1 A/g. This work provides a strategic approach for the systematic development of WS2-based anode materials for SIBs.

Highly active nitrogen-phosphorus co-doped carbon fiber@graphite felt electrode for high-performance vanadium redox flow battery.

Heteroatom-doped electrodes offer promising applications for enhancing the longevity and efficiency of vanadium redox flow battery (VRFB). Herein, we controllably synthesized N, P co-doped graphite fiber electrodes with conductive network structure by introducing protonic acid and combining electrodeposition and high temperature carbonization. H2SO4 and H3PO4 act as auxiliary and dopant, respectively. The synergistic effect between N and P introduces additional defect structures and active sites on the electrodes, thereby enhancing the reaction rate, as confirmed by density functional theory calculations. Furthermore, the conductive network structure of carbon fibers improves electrode-to-electrode connectivity and reduces internal battery resistance. The optimized integration of these strategies enhances VRFB performance significantly. Consequently, the N, P co-doped carbon fiber modified graphite felt electrodes demonstrate remarkably high energy efficiency at 200 mA cm-2, surpassing that of the blank battery by 7.9 %. This integrated approach to in-situ controllable synthesis provides innovative insights for developing high-performance, stable electrodes, thereby contributing to advancements in the field of energy storage.

Enhancing the sodium storage performance of hard carbon by constructing thin carbon coatings via esterification reactions.

Hard carbons derived from pitch are considered a competitive low-cost anode for sodium-ion batteries. However, the preparation of pitch-based hard carbon (PHC) requires the aid of a pre-oxidation strategy, which introduces unnecessary defects and oxygen elements, which leads to low initial Coulombic efficiency (ICE) and poor cycling stability. Herein, we demonstrate a new surface engineering strategy by grafting chemically active glucose molecules on the PHC surface via esterification reactions, which can achieve low-cost nano-scaled carbon coating. Thin glucose coating can be carbonized at a lower temperature, which results in a more closed pore structure and fewer functional groups. The as prepared PHC exhibits a high reversible capacity of 328.5 mAh/g with a high ICE of 92.08 % at 0.02 A/g. It is noteworthy that the PHC can be adapted to a variety of cathode materials for full-cell assembling without pre-sodiation, which maintains the characteristics of high capacity and excellent cycling stability. The performance of resin-based hard carbon coated with a similar method was also improved, demonstrating the universality of the technique.

Synthesis of novel nanoflowers-like P, K co-doped graphitic carbon nitride for efficient H2O2 photoproduction.

Photocatalytic oxygen reduction is considered an economical and green way to produce H2O2. Graphitic carbon nitride is a common photocatalyst, but its activity is limited by the low specific surface area and the high recombination rate of photogenerated electron-hole pairs. Herein, nanoflowers-like phosphorus (P) and potassium (K) co-doped graphitic carbon nitride (PKCN) is synthesized by co-polymerization of ammonium dihydrogen phosphate and melamine in the mixed molten salt (KCl/LiCl) medium. Within 90 min, the synthesized PKCN-0.05 can produce 4.97 mmol L-1 of H2O2, which is 7.8 times higher than that of pure bulk g-C3N4. The enhanced photocatalytic performance of PKCN-0.05 is mainly attributed to the following: 1) KCl/LiCl molten salt induces melamine to form a three-dimensional flower-like morphology, which expands the specific surface area, exposes more active sites, and improves the light utilization efficiency; 2) high crystallinity of PKCN-0.05 and the K ions inserted between the interlayers are beneficial for accelerating electron transfer; 3) the formation of PN bonds and the existence of N vacancies promotes the separation of photoproduced carriers; 4) the negatively shifted conduction band of PKCN-0.05 favors oxygen reduction.

Multifunctional bacterial cellulose­derived carbon hybrid aerogel for ultrabroad microwave absorption and thermal insulation.

Carbon aerogel has gained intense attention as one of the most promising microwave absorption materials. It can overcome severe electromagnetic pollution, thanks to its 3D macroscopic structure and superb conductive loss capacity. However, there is still a big challenge to endow multifunctionality to carbon aerogel while maintaining its good electromagnetic wave absorption (EWA) so as to adapt wide practical application. Herein, a novel carbon-based aerogel consisting of Cu and TiO2 nanoparticles dispersed on carbon nanofiber framework was derived from carbonized bacterial cellulose (CBC) decorated with its mother bacteria via freeze-drying, in situ growth and carbonization strategies. The synthesized carbon-based CBC/Cu/TiO2 aerogel achieved an excellent EWA performance with a broad effective absorption bandwidth (EAB) of 8.32 GHz. It is attributed to the synergistic loss mechanism from multiple scattering, conductive network loss, interfacial polarization loss and dipolar polarization relaxation. Meanwhile, the obtained aerogel also shows an excellent thermal insulation with a 3-mm-thick sample generating a temperature gradient of over 42 °C at 85 °C and a maximum radar cross-section (RCS) reduction of 23.88 dB m2 owing to the cellular structure and synergistic effects of multi-components. Therefore, this study proposes a feasible design approach for creating lightweight, effective, and multifunctional CBC-based EWA materials, which offer a new platform to develop ultrabroad electromagnetic wave absorber under the guidance of RCS simulation.

Construction of a one-stop N-doped negatively charged carbon dot nanoplatform with antibacterial and anti-inflammatory dual activities for wound infection based on biocompatibility.

The development of bacterial resistance significantly contributes to the persistence of infections. Although previous studies have highlighted the benefits of metal-doped positive carbon nanodots in managing bacterial wound infections, their mechanism of action is relatively simple and they may pose potential hazards to human cells. Therefore, it is essential to develop a one-stop carbon dot nanoplatform that offers high biocompatibility, antibacterial properties, and anti-inflammatory activities for wound infection management. This study explores the antibacterial efficacy, without detectable resistance, and wound-healing potential of nitrogen-doped (N-doped) negatively charged carbon dots (TPP-CDs). These carbon dots are synthesized using tannic acid (TA), polyethylene polyamine, and polyethylene glycol (PEG) as precursors, with a focus on their biocompatibility. Numerous systematic studies have shown that TPP-CDs can effectively destroy bacterial biofilms and deoxyribonucleic acid (DNA), while also inducing oxidative stress, leading to a potent antimicrobial effect. TPP-CDs also demonstrate the ability to scavenge excess free radicals, promote cellular proliferation, and inhibit inflammatory factors, all of which contribute to improved wound healing. TPP-CDs also demonstrate favorable cell imaging capabilities. These findings suggest that N-doped negatively charged TPP-CDs hold significant potential for treating bacterial infections and offer practical insights for their application in the medical field.

Synthesis of nitrogen-doped amorphous carbon nanotubes from novel cobalt-based MOF precursors for improving potassium-ion storage capability.

Amorphous carbon materials with sophisticated morphologies, variable carbon layer structures, abundant defects, and tunable porosities are favorable as anodes for potassium-ion batteries (PIBs). Synthesizing amorphous carbon materials typically involves the pyrolysis of carbonaceous precursors. Nonetheless, there is still a lack of studies focused on achieving multifaceted structural optimizations of amorphous carbon through precursor formulation. Herein, nitrogen-doped amorphous carbon nanotubes (NACNTs) are derived from a novel composite precursor of cobalt-based metal-organic framework (CMOF) and graphitic carbon nitride (g-CN). The addition of g-CN in the precursor optimizes the structure of amorphous carbon such as morphology, interlayer spacing, nitrogen doping, and porosity. As a result, NACNTs demonstrate significantly improved electrochemical performance. The specific capacities of NACNTs after cycling at current densities of 100 mA/g and 1000 mA/g increased by 194 % and 230 %, reaching 346.6 mAh/g and 211.8 mAh/g, respectively. Furthermore, the NACNTs anode is matched with an organic cathode for full-cell evaluation. The full-cell attains a high specific capacity of 106 mAh/gcathode at a current density of 100 mA/g, retaining 90.5 % of the specific capacity of the cathode half-cell. This study provides a valuable reference for multifaceted structural optimization of amorphous carbon to improve potassium-ion storage capability.

Coal-derived boron and phosphorus co-doped activated carbon with expanded interlayer space for high performance sodium ion capacitor anode.

Aiming at the key problem of Na+ insertion difficulty and low charge transfer efficiency of activated carbon materials. It is an effective strategy to increase the lattice spacing and defect concentration by doping to reduce the ion diffusion resistance and improve the kinetics. Hence, anthracitic coal is used to prepare activated carbon (AC) and B,P-doped activated carbon (B,P-AC) as the cathode and anode materials for high-performance all-carbon SICs, respectively. AC cathode material has high specific surface area and reasonable micropore structure, which shows excellent capacitance performance. B,P-AC anode material has the advantages of extremely high specific surface area (1856.1 m2/g), expanded interlayer spacing (0.40 nm) and uniform distribution of B and P heteroatoms. Hence, B,P-AC anode achieves a highly reversible Na+ storage capacity of 243 mAh/g at a current density of 0.05 A/g. Density functional theory (DFT) calculations further verify that B,P-AC has stronger Na+ storage performance. The final assembled B,P-AC//AC SIC offers a high energy density of 109.78 Wh kg-1 and a high-power density of 10.03 kW kg-1. The high-performance coal-derived activated carbon of this work provides a variety of options for industrial production of electrode materials for sodium ion capacitors.

Carbon/copper oxide electrode materials with high atomic utilization constructed by in-situ induced growth strategy of nano metal-organic frameworks.

Carbon/metal composites derived from metal-organic frameworks (MOFs) have attracted widespread attention due to their excellent electronic conductivity, adjustable porosity, and outstanding stability. However, traditional synthesis methods are limited by the dense stereo geometry and large crystal grain size of MOFs, resulting in many metals active sites are buried in the carbon matrix. While the common strategy involves incorporating additional dispersed media into material, this leads to a decrease in practical metal content. In this study, nanosized copper-metal-organic frameworks (Cu-MOFs) are in-situ grown on surface of carbon spheres by pre-anchoring copper ions, and the hybrid composite of porous carbon/copper oxide with high copper atom utilization rate is prepared through activation and pyrolysis methods. This strategy effectively addresses the issue of insufficient exposure of metal sites, and the obtained composite material exhibits high effective copper atom utilization rate, large specific surface area (2052.3 m2·g-1), diverse pore structure, outstanding specific capacity (1076.5F·g-1 at 0.5 A·g-1), and excellent cycle stability. Furthermore, this highly atom-economical universal method has positive significance in application fields of catalysis, energy storage, and adsorption.

Charged functional groups modified porous spherical hollow carbon material as CDI electrode for salty water desalination.

As a new electrochemical technology, capacitive deionization (CDI) has been increasingly applied in environmental water treatment and seawater desalination. In this study, functional groups modified porous hollow carbon (HC) were synthesized as CDI electrode material for removing Na+ and Cl- in salty water. Results showed that the average diameter of HC was approximately 180 nm, and the infrared spectrum showed that its surface was successfully modified with sulfonic and amino groups, respectively. The sulfonic acid functionalized HC (HC-S) showed better electrochemical and desalting performance than the amino-functionalized HC (HCN), with a maximum Faradic capacity of 287.4 F/g and an adsorptive capacity of 112.97 mg/g for NaCl. Additionally, 92.63% capacity retention after 100 adsorption/desorption cycles demonstrates the excellent stability of HC-S. The main findings prove that HC-S is viable as an electrode material for desalination by high-performance CDI applications.