Nonsurgical Endodontic Treatment of Type II Dens Invaginatus in A Maxillary Lateral Incisor: A Case Report.

Dens invaginatus (DI) is one of the developmental dental anomalies that results in an invagination of the enamel organ into the dental papila during odontogenesis. The purpose of this study is to report a case of nonsurgical endodontic treatment of an Oehlers type II DI in a right maxillary lateral incisor with an extensive periapical damage, along with the two-year clinical and tomographic follow-up. A 30-year-old patient was referred for endodontic treatment of tooth #12. On clinical examination, a change in the shape and color of the crown was observed. The tooth responded negative to pulp sensibility, percussion, palpation and mobility tests. After tomographic evaluation, an Oehlers type II DI was visualized, in addition to an extensive periradicular lesion. The diagnosis was asymptomatic apical periodontitis. The treatment was carried out in two sessions, through intense enhancement of the auxiliary chemical substance with passive ultrasonic irrigation, XP-Endo Finisher and the use of hydroxide-based intracanal medication. Appropriate treatment in cases with anatomic variations requires an accurate and early diagnosis based on clinical examination and radiographic images. A two-year follow-up of the present case showed that the correct diagnosis associated with appropriate instrumentation techniques, supplementary disinfection, and adequate three-dimensional sealing of the canal with filling material, resulted in regression of the periradicular lesion and bone repair.

Evaluation of Canal Transportation and Centering Ability of RaCe and Af f-one Systems by Cone-beam Computed Tomography: An in Vitro Study.

Introduction: Rotary systems have made significant advances to improve their root canal preparation efficacy. These instruments can properly preserve the root canal anatomy and morphology. The present in vitro study aimed to compare canal transportation and centering ability of RaCe and Af f-one systems using cone-beam computed tomography. Materials and Methods: Thirty-six mandibular molars were included. The samples were randomly assigned to two groups (n=18): group 1, RaCe, and group 2, Af f-one. Canal preparation was conducted using the respective files according to the manufacturers' instructions. The cone-beam computed tomographic scanning of the samples was performed before and after preparation. The data were analyzed by using two-way ANOVA. Results: In both the RaCe and Af f-one rotary systems, canal centrality and transportation were similar at coronal, middle, and apical cross-sections. In addition, canal transportation and centrality were identical in the RaCe and Af f-one rotary files (P<0.05). Conclusion: The two studied rotary systems did not exhibit significant differences in root canal transportation and preservation of root canal centrality in the apical, middle, and coronal thirds.

Evaluation of Root Canal Morphology of Mandibular Premolars Using Cone-beam Computed Tomography in Golestan Province, North of Iran.

Introduction: Successful endodontic treatment depends on completely clearing, shaping, and filling the prepared canals. Knowledge of the common and aberrant varying pulp anatomies is essential for suitable root canal treatment. Since, this anatomy is complex and varies morphologically in different populations. This study aims to determine the number of roots, canals, and evaluation of mandibular premolars canals using cone-beam computed tomography (CBCT) images in one of Iran's northern provinces (Golestan). Materials and Methods: CBCT axial, coronal, and sagittal slices of two hundred and twelve mandibular premolars were analyzed to determine the number of roots and canals based on Vertucci type. The images were analyzed in a one-millimeter slice in mesiodistal and buccolingual dimensions based on gender. The data were analyzed using the Chi-score test to compare the components if the defaults were not established. A significance level of 0.05 was considered. Result: Of the two hundred twelve teeth evaluated, 130 (61.3%) were first premolars, and 82 (38.6%) were second premolars. Most first premolars (78.5%) and almost all second premolars (97.6%) had one root. Morphological types of root canals were identified based on Vertucci's classification types I, II, III, IV, V, or VIII, and type I was the most frequent. There were no significant associations between number of roots and sex (P>0.05). Conclusion: Mandibular premolars mostly had one root and type I Vertucci morphology. The frequency of two-canal premolars was higher in the male population. Although the abundance of two or three roots with different morphologies was also observed, the possibility of the presence of an additional root canal should be considered.

Guided Endodontic Treatment of Mandibular Incisor with Pulp Canal Obliteration following Dental Trauma: A Case Report.

Root canal obliteration is caused by hard tissue apposition and is often associated with teeth with a history of trauma, orthodontic movement, caries reaction, restorative procedures near the pulp chamber, and teeth of elderly patients. Preoperative planning of root canal treatment should be thorough and include an assessment of the patient's signs and symptoms in addition to the evaluation of complementary examinations. In a 27-year-old patient with dyschromia of the lower central incisor, a history of dental trauma, and a positive response to vertical percussion, an initial periapical radiograph was obtained that showed calcification of the canal and presence of a periapical lesion. The patient presented with pain on chewing, a positive response to palpation and a vertical percussion test. The diagnosis was symptomatic apical periodontitis. A cone-beam computed tomography scan was requested and a surface scan was performed to establish a static guide. The root canal was accessed in the middle third of the root and the canal was located using a minimally invasive approach. The root canal was treated conventionally. Results obtained showed the success of the treatment after a 3-year clinical and radiographic follow-up. Therefore, the use of an endodontic guide in cases of calcified canals significantly reduces the clinician's working time and offers a more predictable approach to the treatment of these pathologies.

Prevalence of Untreated Canals and Their Association with Periapical Periodontitis Using Cone-beam Computed Tomography.

Introduction: Untreated canals represent the primary cause of treatment failure in molars and the second leading cause in other dental groups. This study determined the prevalence of untreated canals and their relationship with periapical periodontitis using cone-beam computed tomography (CBCT) images. Materials and Methods: 385 CBCT images with at least one treated canal were selected from the oral and maxillofacial radiology center. The number of roots and canals, presence, and size of periapical pathology, and presence of untreated canals were recorded. The study used descriptive statistics and Chi-square, Fisher's exact, and odds ratio tests to analyze data. Results: Of the 2053 teeth examined, 14.9% had at least one untreated canal. Untreated canals in teeth increase the chance of having a periapical lesion, raising the prevalence by 11 times. Of these, 91.8% had both untreated canals and periapical lesions. This was more than teeth without untreated canals (35.8%). Most untreated canals were in maxillary molars (65.3%), and mandibular molars (12.54%). There was a statistically significant relationship (P<0.001) between the number of roots, canals, expansion, destruction, and jaw type with the prevalence of untreated canals. The maxillary first molar (68.66%) and second mesiobuccal (MB2) canal (63.27%) had the highest percentages of untreated canals. Conclusions: The MB2 had the highest prevalence of untreated canals. The presence of untreated canals significantly increased the risk of expansion and/or destruction. Therefore, identifying these conditions can also be useful in diagnosing untreated canals. Dentists should assess the anatomy of the tooth and the structure of the root canal to minimize the possibility of an untreated canal. CBCT can assist in this process.

Validation of automated registration of intraoral scan onto Cone Beam Computed Tomography for an efficient digital dental workflow.

OBJECTIVE: This study aimed to validate a newly developed automated method (Relu® Creator, Leuven, Belgium) for multimodal registration of intraoral scan (IOS) and Cone Beam Computed Tomography (CBCT). METHODS: Time point-matched IOS and CBCT scans of forty patients with variable dental statuses (natural dentition, partial edentulism, presence of orthodontic brackets) were selected. Three operators registered IOS and CBCT scans using three state-of-the-art softwares for orthodontics and orthognathic surgery (IPS Case Designer Proplan CMF and Dolphin Imaging). Automated registration was compared to expert-performed semi-automated registration. Time consumption, accuracy, and consistency of the proposed method were benchmarked to semi-automated registration using root mean squared error calculations. The robustness of the automated registration was evaluated in relationship to the dental status of the patients in the dataset. RESULTS: On average, automatic registration was 7.3 times faster than semi-automatic registration performed by an expert operator. Automatic registration yielded reliable results with low deviation errors compared to the differently skilled operators and semi-automated software. Automated registration surpassed human variability as expressed in intra- and inter-operator inconsistencies. Neither orthodontic brackets nor edentulism impacted registration accuracy. CONCLUSIONS: The presented automated method for IOS and CBCT registration is faster, equally accurate, and more consistent than semi-automatic registration performed by an expert or an occasional operator. With similar results among cases with different dental statuses, the clinical feasibility of the method is ensured. CLINICAL SIGNIFICANCE: A validated automated registration method provides accurate and fast multimodal image integration without incorporating operator bias at the very start of the digital workflows for dentistry, periodontics, orthodontics and orthognathic surgery.

Scout images acquired prior to cone beam CT acquisitions: reproducibility of findings and added diagnostic information.

OBJECTIVES: The aim of the present study was to assess the reproducibility of findings in cone beam computed tomography (CBCT) scout images. Furthermore, the study aimed to assess whether a scout image shows pathology not seen within the CBCT volume (ie, added diagnostic information) and therefore must be assessed on the same terms as the full volume. METHODS: Using a retrospective design, 233 CBCT reports and scout images were assessed. Kappa statistics and percentage of accordance were used to evaluate intra- and interobserver reproducibility as well as agreement between scout and CBCT report. RESULTS: Intra- and interobserver reproducibility were overall low (kappa ranging from -0.008 to 1.000). Agreement between findings reported in the CBCT and scout was also low. One-hundred-fourteen impacted teeth, one apical periodontitis, and two sinus conditions seen in the scout image were not registered in the full volume report due to the extended size of the scout image. CONCLUSIONS: Reproducibility of findings in scout images compared to CBCT volumes was low, and the scout showed very little additional diagnostic information. ADVANCES IN KNOWLEDGE: This study shows that although the reproducibility of viewing scout images is low, rare findings can go undetected if the scout is not assessed. Legislation regarding interpretation of scout images needs to be discussed.

Dental Pathophysiology of Odontogenic Sinusitis: Endodontic Infections.

Bacterial odontogenic sinusitis (ODS) arises from maxillary dental issues or oral procedures, and affects at least the maxillary sinuses, with or without other paranasal sinus involvement. It has been historically underreported, in contrast to more recent findings attributing 25-40% of chronic maxillary sinusitis to dental causes. Endodontic infections represent one of the most common causes of ODS. Endodontic factors like root canal infection and microbial proximity to sinus cavities play pivotal roles. Host immunological responses further shape disease severity and progression. This article aims to explore the complexity of endodontic infections that cause ODS, elucidating anatomical, microbial, and immunological aspects.

The efficacy of cone-beam computed tomography-guided transcatheter arterial chemoembolization in hepatocellular carcinoma survival: A systematic review.

Cone-beam computed tomography (CBCT)-guided transcatheter arterial chemoembolization (TACE) represents an alternative treatment option for advanced hepatocellular carcinoma (HCC) patients, yet a comprehensive evaluation of CBCT guidance on this procedure and CBCT's impact on patient survival remains lacking. We aimed to assess the efficacy and benefits of CBCT-guided TACE in improving survival outcomes for patients with HCC and show the importance of CBCT in interventional radiology. Meta-analysis was conducted to evaluate CBCT-guided TACE compared to conventional TACE in the treatment of HCC. PubMed and Cochrane library databases were searched for studies published. Outcomes of interest included 1- or 3-year local progression-free survival (LPFS) rates, overall survival (OS) rates, and tumor response results. A total of eight studies were included in the meta-analysis, comprising 1176 patients. The analysis showed that CBCT-guided TACE improved 1-year LPFS (odds ratio [OR] = 2.81, P < 0.001), 3-year (OR = 4.42, P = 0.002), and the 3-year OS rates (OR = 3.03, Confidence Interval = 1.65-11.80, P = 0.14) compared to conventional TACE. CBCT-guided TACE enhances survival outcomes for patients with HCC; by addressing this research gap, our study endeavors to encourage clinicians and researchers to pursue this medical technology by providing a robust synthesis of current evidence.

Multiple pulp stones emerge across all teeth during mixed dentition: A case report.

BACKGROUND: This paper reports a rare presentation of multiple pulp stones (PSs) emerging in all teeth during mixed dentition. It offers valuable insights into the clinical diagnosis, treatment, and prognosis of multiple PSs, shedding light on their occurrence during the mixed dentition period. CASE SUMMARY: A 10-year-old girl presented with repeated pain in the mandibular right posterior teeth. Intraoral examination revealed carious lesions, abnormal tooth shapes, and anomalies in tooth number. Radiographic examinations showed multiple PSs with diverse shapes, sizes, and quantities in all teeth, alongside anomalies in tooth shape and number. Root canal therapy was initiated, but the patient initially lacked timely follow-up. Upon return for treatment completion, an extracted tooth revealed irregular calculus within the pulp cavity. CONCLUSION: This case underscores the importance of considering multiple PSs in mixed dentition, necessitating comprehensive evaluation and management strategies.

Improving diagnostic strategies in bronchoscopy for peripheral pulmonary lesions.

INTRODUCTION: In the past two decades, bronchoscopy of peripheral pulmonary lesions (PPLs) has improved its diagnostic yield due to the combination of various instruments and devices. Meanwhile, the application is complex and intertwined. AREAS COVERED: This review article outlines strategies in diagnostic bronchoscopy for PPLs. We summarize the utility and evidence of key instruments and devices based on the results of clinical trials. Future perspectives of bronchoscopy for PPLs are also discussed. EXPERT OPINION: The accuracy of reaching PPLs by bronchoscopy has improved significantly with the introduction of combined instruments such as navigation, radial endobronchial ultrasound, digital tomosynthesis, and cone-beam computed tomography. It has been accelerated with the advent of approach tools such as newer ultrathin bronchoscopes and robotic-assisted bronchoscopy. In addition, needle aspiration and cryobiopsy provide further diagnostic opportunities beyond forceps biopsy. Rapid on-site evaluation may also play an important role in decision making during the procedures. As a result, the diagnostic yield of bronchoscopy for PPLs has improved to a level comparable to that of transthoracic needle biopsy. The techniques and technologies developed in the diagnosis will be carried over to the next step in the transbronchial treatment of PPLs in the future.

Evaluation of the accuracy of cone beam computed tomography (CBCT) in the detection of peri-implant fenestration.

BACKGROUND: Accurate assessment of the bone supporting the implant is crucial. Early detection of bone defects around the implant can prevent the loss of bone support that ultimately leads to the loss of the implant. Therefore, the purpose of this study is to check the accuracy of CBCT in detecting peri-implant fenestrations around the implant. MATERIALS & METHODS: In this laboratory study, healthy beef ribs were used. The ribs were divided into three groups of 12 (control group, 1-2 mm fenestration group, and 2-3 mm fenestration group). The blocks were cut to a length of 20 mm and 36 osteotomies with dimensions of 4 × 12 mm were made by the periodontist in order to place the implant in these bone blocks. Then the titanium implant was placed in the holes and the initial scan was performed with CBCT. In the second group, fenestration-like lesions were created on the same buccal side at a distance of 10 mm from the crest with a diameter of 1-2 mm and in the third group with a diameter of 2-3 mm, and the CBCT scan was performed again with the same parameters. Two radiologists evaluated the images twice for the presence and absence of fenestration. RESULTS: There was no statistically significant difference between direct measurements and CBCT in the fenestration group of 1-2 mm (p < 0.05), but there was a significant difference between direct measurements and CBCT in the fenestration group of 2-3 mm and underestimation was observed in CBCT measurements. CONCLUSION: The findings of this study showed that CBCT radiography has a higher accuracy in measuring the fenestration around the implant with a smaller diameter and has an acceptable diagnostic value in detecting bone loss around the implant.

Risk prediction model of impacted supernumerary tooth-associated root resorption in children based on cone-beam computed tomography analysis: a case control study.

BACKGROUND: External surface resorption is pressure-induced resorption and occurs on the external surface of the root, pressure exerted by impacted teeth, is common causes of external surface resorption. Predictive risk factors of impacted supernumerary tooth-associated root resorption (ISTARR) mentioned in this article include supernumerary teeth and patient factors. To investigate the risk factors of impacted supernumerary tooth-associated root resorption and predict the incidence of root resorption. METHODS: This restrospective study enrolled 324 patients with impacted supernumerary tooth. All Cone-Beam Computed Tomography (CBCT) data and patient information were divided into two groups (without tooth root resorption and with root resorption). CBCT images and patient information (age and gender) of 133 patients had adjacent tooth root resorption and 191 did not. seven variables were analysed using binary logistic regression. RESULTS: Individual analysis of potential risk factors showed that age, crown mesiodistal direction, root formation, and odontotheca of the impacted supernumerary tooth were associated significantly with ISTARR. Binary logistic regression showed that impacted supernumerary tooth with odontotheca (Odd Ratio = 2.926), the crown is in the middle (Odd Ratio = 1.446), located at the middle third of the adjacent tooth root (Odd Ratio = 1.614), complete root development (Odd Ratio = 1.334), and patient's age (Odd Ratio = 1.261) were significantly associated with ISTARR risk. CONCLUSIONS: The risk factors of root resorption can be detected and predicted early according to the features of supernumerary tooth and patient's age. Still, more prospective studies with larger sample size are needed to validate the result.

Variations in head tilt during the acquisition of CBCT scans and their effects on effective radiation dose.

OBJECTIVES: This study evaluated the impact of variations in anteroposterior and lateral tilts of patients' head on radiation-weighted doses to organs/tissues and effective doses using three different cone beam computed tomography machines. METHODS: An anthropomorphic phantom was used to estimate radiation doses in three CBCT machines (OP300, Eagle X 3D, and Eagle Edge). Thermoluminescent dosimeters were placed in regions corresponding to pre-stablished organ/tissues. CBCT examinations from the posterior mandible and anterior maxilla regions were acquired, with three different anteroposterior angulations (0°, 30°, and 45°), and from the posterior mandible in three different lateral angulations (0°, 20° to the left, and 20° to the right side). Radiation-weighted doses for each organ/tissue and effective doses were calculated for each machine and angulation. RESULTS: For the posterior mandible acquisitions, anteroposterior angulations of the head at 30° and 45° yielded a reduction in effective doses in all three devices. A 20° tilt to the right side resulted in lower doses than to the left (same side as the FOV). For the anterior maxilla, increased anteroposterior angulation was associated with reduction in effective dose in two devices. CONCLUSION: Effective doses are lower when small FOV CBCT exams of the posterior mandible and anterior maxilla are acquired with increased anteroposterior head angulation at 30° and 45°. For FOV in the posterior mandible, a 20° lateral tilt towards the side opposite to the FOV also yields lower effective doses. The main contribution to these dose reductions is the decrease in dose to salivary glands.

3D printing and CBCT anatomical reproducibility assessment in forensic scenarios.

INTRODUCTION: The scientific community highlighted the relevance of 3D physical models since the beginning of the XXI century, complementary to three-dimensional(3D) digital volume by computer tomography, to support court discussions on medico-legal issues. The recreation of 3D evidence can be an important tool for investigators and experts, providing a better understanding of the causes and circumstances of the events involved in a crime. OBJECTIVE: The present study aims to assess the reproducibility of 3D printed and 3D tomographic volumes generated from mandibles following simulated forensic injuries, highlighting the recreation of crime tools. MATERIAL AND METHODS: Concerning the study design presented, data collection was performed in three phases. Nine simulated injuries of forensic interest were selected (phase1) and all the mandibles were scanned tomographically, individually, by Cone Beam Computed Tomography CBCT (phase 2). Then, in phase 3, the DICOM images were used for 3D printing with the Ender 3® printer by the Fused Deposition Modeling (FDM) technique. The data analysis followed two procedures: the comparison between the artificial mandible and 3D tomographic volume (AT) and the comparison between the artificial mandible and 3D printed volume, or the copy (AC). Data were analyzed using T-Student and ICC tests and presented in Bland-Altman plots. CONCLUSION: The analogic technique applied in 3D printed volume, when compared with computerized technique, using 3D digital images and measurement, showed to be accurate and reproducible. Further studies are needed in search of standardization for three-dimensional measurements in digitized and printed volumes.

Impact of CBCT acquisition protocols and artifact reduction filters on diagnosing vertical root fractures.

AIM: To evaluate the impact of acquisition protocols and artifact reduction filters in cone beam computed tomography on diagnosing vertical root fractures in endodontically treated teeth with and without intraradicular posts. MATERIALS AND METHODS: We analyzed 480 tomographic images acquired from two J. Morita scanners (0.125- and 0.08-mm voxel sizes protocols), with application of a blooming artifact reduction filter. Three evaluators assessed these images for root fractures using a 5-point Likert scale. Diagnostic accuracy between filters and protocols was determined using generalized linear models with binomial distribution for the outcome, considering protocol, filter, and dental status. Sensitivity, specificity, positive predictive value, and negative predictive value were also estimated for the filters and protocols. RESULTS: The 0.08-mm voxel size protocol demonstrated a significantly higher percentage of accurate diagnosis compared to the 0.125-mm protocol (p = .001). No statistically significant differences (p ≥ .087) were observed for filter application, interaction between protocol and filter, or dental status. Accuracy, sensitivity, and specificity values were respectively: .93, .87, 1.00 (protocol 1); .99, .99, .99 (protocol 2); .98, .96, .99 (no filter); .95, .90, 1.00 (with filter). CONCLUSION: The new findings found for the two J Morita scanners used in our study were that images acquired using the voxel size of 0.08 mm showed an improvement in the diagnosis of root fractures and the filters in these devices have no relevance significant for the diagnosis.

Osseous Outcomes of Cleft Alveolar Bone Grafting with Allograft and Platelet-Rich Fibrin: Preliminary Study with Radiological Outcome.

OBJECTIVE: Cleft lip and palate are the most common craniofacial malformations worldwide. The alveolar cleft is treated with a bone graft, between 4 and 7 years of age in mixed dentition. This is an important step because it provides good quality jawbone and a better support of the lip and the alar cartilage on the side of the cleft. Bone autografting with iliac harvesting remains the most commonly used technique, but it is not without risks. Allograft techniques have therefore been described to reduce this morbidity (pain, infectious risk, hemorrhagic risk, fracture risk). The aim of this study was to evaluate, one year after allografting, the efficiency and consolidation of the bone allograft in the alveolar cleft. SETTING: A retrospective study was conducted in the department of pediatric craniomaxillofacial surgery in the Woman-Mother-Child Hospital in Lyon, France. PATIENTS: This series includes 22 patients or 25 alveolar cleft bone grafts, including 16 boys and 6 girls, with an average age of 6.1 years. MAIN OUTCOME MEASURES: Quantify the residual bone allograft by evaluating the ratio between the volume of the bone graft and the volume of the initial space on pre- and post-operative cone beam computed tomography. RESULTS: The residual bone allograft percentage at 1 year was 58.5% (± 22.3). CONCLUSIONS: Alveolar cleft bone graft with bone allograft is an alternative to iliac autografting to reduce donor site morbidity.

Anatomical Factors of the Anterior and Posterior Maxilla Affecting Immediate Implant Placement Based on Cone Beam Computed Tomography Analysis: A Narrative Review.

BACKGROUND: The aim of this narrative review was to provide insights into the influence of the morphological characteristics of the anatomical structures of the upper jaw based on cone beam computed tomography (CBCT) analysis on the immediate implant placement in this region. MATERIAL AND METHODS: To conduct this research, we used many electronic databases, and the resulting papers were chosen and analyzed. From the clinical point of view, the region of the anterior maxilla is specific and can be difficult for immediate implant placement. FINDINGS: Anatomical structures in the anterior maxilla, such as the nasopalatine canal and accessory canals, may limit and influence the implant therapy outcome. In addition to the aforementioned region, immediate implant placement in the posterior maxilla may be challenging for clinicians, especially in prosthetic-driven immediate implant placement procedures. Data presented within the recently published materials summarize the investigations performed in order to achieve more reliable indicators that may make more accurate decisions for clinicians. CONCLUSION: The possibility for immediate implant placement may be affected by the NPC shape in the anterior maxilla, while the presence of ACs may increase the incidence of immediate implant placement complications. The variations in IRS characteristics may be considered important criteria for choosing the implant properties required for successful immediate implant placement.

Ultrasonography as an additional tool to localize impacted canines.

Canine impaction is a common dental anomaly that requires a multidisciplinary approach, from diagnosis to treatment. The regular two-dimensional (2D) radiographs are able to visualize if the tooth is impacted, but unable to specifically localize it, and determine if there are any root resorptions associated to it. The cone-beam computed tomography (CBCT) is able to three-dimensionally determine its location, aiding to the diagnosis and treatment plan. The major disadvantage is the amount of radiation that is added to the patient and can be even more significant in pediatric patients. The intra-oral ultrasound (io-US) is a new non-invasive and non-radiating real-time chairside imaging method that has the potential to aid in locating the impacted tooth. This paper presents 4 cases that required a CBCT for the location and treatment planning of impacted maxillary canines and were also scanned with intra-oral ultrasound. The images were then compared to the CBCT exam for validation of the new method. Through these cases, we highlight the capability of the io-US to locate the impacted canines. Other advantages of io-US might include evaluation of soft tissue thickness and vasculature that are important for surgical planning and execution.