Branching in poly(amine-co-ester) polyplexes impacts mRNA transfection.

Branching is a key structural parameter of polymers, which can have profound impacts on physicochemical properties. It has been demonstrated that branching is a modulating factor for mRNA delivery and transfection using delivery vehicles built from cationic polymers, but the influence of polymer branching on mRNA delivery remains relatively underexplored compared to other polymer features such as monomer composition, hydrophobicity, pKa, or the type of terminal group. In this study, we examined the impact of branching on the physicochemical properties of poly(amine-co-esters) (PACE) and their efficiency in mRNA transfection in vivo and in vitro under various conditions. PACE polymers were synthesized with various degrees of branching ranging from 0 to 0.66, and their transfection efficiency was systemically evaluated. We observed that branching improves the stability of polyplexes but reduces the pH buffering capacity. Therefore, the degree of branching (DB) must be optimized in a delivery route specific manner due to differences in challenges faced by polyplexes in different physiological compartments. Through a systematic analysis of physicochemical properties and mRNA transfection in vivo and in vitro, this study highlights the influence of polymer branching on nucleic acid delivery.

Partitioning of an Enzyme-Polymer Surfactant Nanocomplex into Lipid-Rich Cellular Compartments Drives In Situ Hydrolysis of Organophosphates.

Most organophosphates (OPs) are hydrophobic, and after exposure, can sequester into lipophilic regions within the body, such as adipose tissue, resulting in long term chronic effects. Consequently, there is an urgent need for therapeutic agents that can decontaminate OPs in these hydrophobic regions. Accordingly, an enzyme-polymer surfactant nanocomplex is designed and tested comprising chemically supercharged phosphotriesterase (Agrobacterium radiobacter; arPTE) electrostatically conjugated to amphiphilic polymer surfactant chains ([cat.arPTE][S-]). Experimentally-derived structural data are combined with molecular dynamics (MD) simulations to provide atomic level detail on conformational ensembles of the nanocomplex using dielectric constants relevant to aqueous and lipidic microenvironments. These show the formation of a compact admicelle pseudophase surfactant corona under aqueous conditions, which reconfigures to yield an extended conformation at a low dielectric constant, providing insight into the mechanism underpinning cell membrane binding. Significantly, it demonstrated that [cat.arPTE][S-] spontaneously binds to human mesenchymal stem cell membranes (hMSCs), resulting in on-cell OP hydrolysis. Moreover, the nanoconstruct can endocytose and partition into the intracellular fatty vacuoles of adipocytes and hydrolyze sequestered OP.

Tribological Properties of Composites Based on Single-Component Powdered Epoxy Matrix Filled with Graphite.

Composites based on powdered single-component epoxy matrix are an alternative technological solution for composites produced using liquid epoxy resins. This article describes in detail the process of producing graphite-reinforced composites for tribological applications. The advantages and disadvantages of technological processes where the matrix is a single-component epoxy powder were demonstrated, and the properties of the obtained materials were examined. A series of composite materials with the graphite filler with sizes below 10 µm and below 45 µm and weight additions of 5, 10, 20, 30% were produced. Mechanical tests and tribological tests conducted with the pin-on-block method were performed, and the mechanism of tribological wear was described. The conducted research allowed us to conclude that the incorporation of graphite, regardless of particle size, above 10% by weight results in a significant reduction in the friction coefficient (approximately 40-50% lower than in unfilled epoxy resin), which is beneficial in the production of cheap self-lubricating materials.

Investigating the Impact of Superabsorbent Polymer Sizes on Absorption and Cement Paste Rheology.

This study aims to understand the water retention capabilities of Superabsorbent Polymers (SAPs) in different alkaline environments for internal curing and to assess their impact on the rheological properties of cement paste. Therefore, the focus of this paper is on the absorption capacities of two different sizes of polyacrylic-based Superabsorbent Polymers : SAP A, with an average size of 28 µm, and SAP B, with an average size of 80 µm, in various solutions, such as pH 7, pH 11, pH 13, and cement filtrate solution (pH 13.73). Additionally, the study investigates the rheological properties of SAP-modified cement pastes, considering three different water-to-cement (w/c) ratios (0.4, 0.5, and 0.6) and four different dosages of SAPs (0.2%, 0.3%, 0.4%, and 0.5% by weight of cement). The results showed that the absorption capacity of SAP A was higher in all solutions compared to SAP B. However, both SAPs exhibited lower absorption capacity and early desorption in the cement filtrate solution. In contrast to the absorption results in pH 13 and cement filtrate solutions, the rheological properties, including plastic viscosity and yield stress, of the cement paste with a w/c ratio of 0.4 and 0.5, as well as both dry and wet (presoaked) SAPs, were higher than those of the cement paste without SAP, indicating continuous absorption by SAP. The viscosity and yield stress increased over time with increasing SAP dosage. However, in the mixes with a w/c ratio of 0.6, the values of plastic viscosity and yield stress were initially lower for the mixes with dry SAPs compared to the reference mix. Additionally, cement pastes containing wet SAP showed higher viscosity and yield stress compared to the pastes containing dry SAP.

Development of a molecularly imprinted polymer-based electrochemical sensor with metal-organic frameworks for monitoring the antineoplastic drug vismodegib.

A novel and robust electrochemical sensing tool for the determination of vismodegib (VIS), an anticancer drug, has been developed by integrating the selective recognition capabilities of molecularly imprinted polymer (MIP) and the sensitivity enhancement capability of metal-organic framework (MOF). Prior to this step, the electrochemical behavior of VIS was investigated using a bare glassy carbon electrode (GCE). It was observed that in 0.5 M H2SO4 solution as electrolyte, VIS has an oxidation peak around 1.3 V and the oxidation mechanism is diffusion controlled. The determination of VIS in a standard solution using a bare GCE showed a linear response in the concentration range from 2.5 µM to 100 µM, with a limit of detection (LOD) of 0.75 µM. Since sufficient sensitivity and selectivity could not be achieved with bare GCE, a MIP sensor was developed in the next step of the study. For this purpose, the GCE surface was first modified by drop casting with as-synthesized Co-MOF. Subsequently, a MIP network was synthesized via a thermal polymerization approach using 2-acrylamido-2-methylpropanesulfonic acid (AMPS) as monomer and VIS as template. MOFs are ideal electrode materials due to their controllable and diverse morphologies and modifiable surface properties. These characteristics enable the development of MIPs with more homogeneous binding sites and high affinity for target molecules. Integrating MOFs could help the performance of sensors with the desired stability and reproducibility. Electrochemical analysis revealed an observable enhancement of the output signal by the incorporation of MOF molecules, which is consistent with the sensitivity-enhancing role of MOF by providing more anchoring sites for the attachment of the polymer texture to the electrode surface. This MOF-MIP sensor exhibited impressive linear dynamic ranges ranging from 0.1 to 1.0 pM for VIS, with detection limits in the low picomolar range. In addition, the MOF-MIP sensor offers high accuracy, selectivity and precision for the determination of VIS, with no interference observed from complex media of serum samples. Additionally, in this study, Analytical GREEnness metric (AGREE), Analytical GREEnness preparation (AGREEprep) and Blue Applicability Grade Index (BAGI) were used to calculate the green profile score.

Branched polymer grafted graphene oxide (GO) as a 2D template for calcium phosphate growth.

HYPOTHESIS: Graphene Oxide (GO)-templated deposition of inorganic materials through synthesis on dispersed single sheets of GO is often complicated by the loss of the desired 2D morphology owing to the coagulation of GO sheets at high salt concentrations and non-templated homogenous nucleation. Modifying GO with anionic polymer is expected to solve both problems by i) enhancing electrostatic(steric) stabilization upon exposure to high concentrations of the ionic precursors, and ii) offering additional nucleation sites at the grafted anionic moieties to avoid homogeneous secondary nucleation. EXPERIMENTS: GO was grafted with branched copolymers of poly(ethylene glycol) methacrylate (PEGMA 500) and diethylene glycol dimethacrylate (DEGDMA) and ω-vinyl terminated methacrylic acid macromonomer (P(MAA)), the latter serving as an addition-fragmentation chain transfer agent. The colloidal stability of GO dispersions in water toward salt was evaluated before and after modification. Precipitation of calcium phosphate (CaP) was performed by incubating modified GO in the precursor solutions. The conditions were optimized to maximize the nucleation selectively onto GO without homogeneous CaP nucleation and coagulation of the GO-sheets. FINDINGS: The copolymer grafted GO-sheets shows superior colloidal stability when dispersed in water. No aggregation occurs in the incubating ionic CaP precursor solutions. The optimum templated deposition of CaP onto the GO sheets by precipitation is to add a second shot of precursors after the nucleation stage to obtain GO sheets fully decorated with calcium phosphate nanorods without self-nucleation. Via the careful design on the GO modification and incubation process, the growth of calcium phosphate nanorods were confined in the desired 2D order exclusively, hereby achieving the goal of an efficient GO-templated synthesis.

Novel elastomeric spiropyran-doped poly(dimethylsiloxane) optical waveguide for UV sensing.

Novel poly(dimethylsiloxane) (PDMS) doped with two different spiropyran derivatives (SP) were investigated as potential candidates for the preparation of elastomeric waveguides with UV-dependent optical properties. First, free-standing films were prepared and evaluated with respect to their photochromic response to UV irradiation. Kinetics, reversibility as well as photofatigue and refractive index of the SP-doped PDMS samples were assessed. Second, SP-doped PDMS waveguides were fabricated and tested as UV sensors by monitoring changes in the transmitted optical power of a visible laser (633 nm). UV sensing was successfully demonstrated by doping PDMS using one spiropyran derivative whose propagation loss was measured as 1.04 dB/cm at 633 nm, and sensitivity estimated at 115% change in transmitted optical power per unit change in UV dose. The decay and recovery time constants were measured at 42 and 107 s, respectively, with an average UV saturation dose of 0.4 J/cm2. The prepared waveguides exhibited a reversible and consistent response even under bending. The sensor parameters can be tailored by varying the waveguide length up to 21 cm, and are affected by white light and temperatures up to 70 ℃. This work is relevant to elastomeric optics, smart optical materials, and polymer optical waveguide sensors.

Normal-Incidence Germanium Photodetectors Integrated with Polymer Microlenses for Optical Fiber Communication Applications.

We present a novel photon-acid diffusion method to integrate polymer microlenses (MLs) on a four-channel, high-speed photo-receiver consisting of normal-incidence germanium (Ge) p-i-n photodiodes (PDs) fabricated on a 200 mm Si substrate. For a 29 µm diameter PD capped with a 54 µm diameter ML, its dark current, responsivity, 3 dB bandwidth (BW), and effective aperture size at -3 V bias and 850 nm wavelength are measured to be 138 nA, 0.6 A/W, 21.4 GHz, and 54 µm, respectively. The enlarged aperture size significantly decouples the tradeoff between aperture size and BW and enhances the optical fiber misalignment tolerance from ±5 µm to ±15 µm to ease the module packaging precision. The sensitivity of the photo-receiver is measured to be -9.2 dBm at 25.78 Gb/s with a bit error rate of 10-12 using non-return-to-zero (NRZ) transmission. Reliability tests are performed, and the results show that the fabricated Ge PDs integrated with polymer MLs pass the GR-468 reliability assurance standard. The demonstrated photo-receiver, a first of its kind to the best of our knowledge, features decent performance, high yield, high throughput, low cost, and compatibility with complementary metal-oxide-semiconductor (CMOS) fabrication processes, and may be further applied to 400 Gb/s pulse-amplitude modulation four-level (PAM4) communication.

Dual-signal output biosensor for the detection of program death-ligand 1 and therapy progress monitoring of cancer.

A disposable dual-output biosensor to detect program death-ligand 1 (PD-L1) was developed for immunotherapy progress monitoring and early cancer detection in a single experimental setup. The aptamer probe was assembled on rGO composited with carboxylated terthiophene polymer (rGO-pTBA) to specifically capture PD-L1 protein labeled with a new redox mediator, ortho-amino phenol para sulphonic acid, for amperometric detection. Each sensing layer was characterized through electrochemical and surface analysis experiments, then confirmed the sensing performance. The calibration plots for the standard PD-L1 protein detection revealed two dynamic ranges of 0.5-100.0 pM and 100.0-500.0 pM, where the detection limit was 0.20 ± 0.001 pM (RSD ≤5.2%) by amperometry. The sensor reliability was evaluated by detecting A549 lung cancer cell-secreted PD-L1 and clinically relevant serum levels of soluble PD-L1 (sPD-L1) using both detection methods. In addition, therapeutic trials were studied through the quantification of sPD-L1 levels for a small cohort of lung cancer patients. A significantly higher level of sPD-L1 was observed for patients (221.6-240.4 pM) compared to healthy individuals (16.2-19.6 pM). After immunotherapy, the patients' PD-L1 level decreased to the range of 126.7-141.2 pM. The results indicated that therapy monitoring was successfully done using both the proposed methods. Additionally, based on a comparative study on immune checkpoint-related proteins, PD-L1 is a more effective biomarker than granzyme B and interferon-gamma.

Electric wiring of bacteria using redox polymers and selective measurement of metabolic activity in the presence of surrounding planktonic bacteria.

Non-electroactive bacteria (n-EAB), constituting the majority of known bacteria to date, have been underutilized in electrochemical conversion technologies due to their lack of direct electron transfer to electrodes. In this study, we established an electric wiring between n-EAB (gram-positive Bacillus subtilis and gram-negative Escherichia coli) and an extracellular electrode via a ferrocene-polyethyleneimine-based redox polymer (Fc-PEI). Chronoamperometry recordings indicated that Fc-PEI can transfer intracellular electrons to the extracellular electrode regardless of the molecular organization of PEI (linear or branched) and the membrane structure of bacteria (gram-positive or -negative). As fluorescence staining suggested, Fc-PEI improves the permeability of the bacterial cell membrane, enabling electron carriers in the cell to react with Fc. In addition, experiments with Fc-immobilized electrodes without PEI suggested the existence of an alternative electron transfer pathway from B. subtilis to the extracellular Fc adsorbed onto the cell membrane. Furthermore, we proposed for the first time that the bacteria/Fc-linear PEI modified structure enables selective measurement of immobilized bacterial activity by physically blocking contact between the electrode surface and planktonic cells co-existing in the surrounding media. Such electrodes can be a powerful analytical tool for elucidating the metabolic activities of specific bacteria wired to the electrode even within complex bacterial communities.

Highly Conductive and Stable Composite Polymer Electrolyte with Boron Nitride Nanotubes for All-Solid-State Lithium Metal Batteries.

All-solid-state lithium metal batteries (ASSLMBs) have emerged as the most promising next-generation energy storage devices. However, the unsatisfactory ionic conductivity of solid electrolytes at room temperature has impeded the advancement of solid-state batteries. In this work, a multifunctional composite solid electrolyte (CSE) is developed by incorporating boron nitride nanotubes (BNNTs) into polyvinylidene fluoride-hexafluoropropylene (PVDF-HFP). BNNTs, with a high aspect ratio, trigger the dissociation of Li salts, thus generating a greater population of mobile Li+, and establishing long-distance Li+ transport pathways. PVDF-HFP/BNNT exhibits a high ionic conductivity of 8.0 × 10-4 S cm-1 at room temperature and a Li+ transference number of 0.60. Moreover, a Li//Li symmetric cell based on PVDF-HFP/BNNT demonstrates robust cyclic performance for 3400 h at a current density of 0.2 mA cm-2. The ASSLMB formed from the assembly of PVDF-HFP/BNNT with LiFePO4 and Li exhibits a capacity retention of 93.2% after 850 cycles at 0.5C and 25 °C. The high-voltage all-solid-state LiCoO2/Li cell based on PVDF-HFP/BNNT also exhibits excellent cyclic performance, maintaining a capacity retention of 96.4% after 400 cycles at 1C and 25 °C. Furthermore, the introduction of BNNTs is shown to enhance the thermal conductivity and flame retardancy of the CSE.

Diagnostic Protocols for Evaluating the Degradation Mechanisms in Gel-Polymer Lithium Batteries.

Gel polymer electrolytes (GPEs) present a promising alternative to standard liquid electrolytes (LE) for Lithium-ion Batteries (LIBs) and Lithium Metal Batteries bridging the advantages of both liquid and solid polymer electrolytes. However, their cycle life still lags behind that of standard LIBs, and their degradation mechanisms remain poorly understood. A significant challenge is the need for specific diagnostic protocols to systematically study the degradation mechanisms of GPE-based cells. Challenges include the separation of cell components and effective washing, as well as the study of the solid electrolyte interfaces, all complicated by the semi-solid nature of GPEs. This paper provides a brief review of existing literature and proposes a comprehensive set of diagnostic tools for dismantling and evaluating the degradation of GPE-based LIBs. Finally, these methods and recommendations are applied to LiNi0.5Mn1.5O4 (LNMO)-graphite cells, revealing electrolyte oxidation as a major source of cell degradation.

Polymer Conjugate as the New Promising Drug Delivery System for Combination Therapy against Cancer.

This review highlights the advantages of combination therapy using polymer conjugates as drug delivery systems for cancer treatment. In this review, the specific structures and materials of polymer conjugates, as well as the different types of combination chemotherapy strategies, are discussed. Specific targeting strategies, such as monoclonal antibody therapy and small molecule ligands, are also explored. Additionally, self-assembled polymer micelles and overcoming multidrug resistance are described as potential strategies for combination therapy. The assessment of combinational therapeutic efficacy and the challenges associated with polymer conjugates are also addressed. The future outlook aims to overcome these challenges and improve the effectiveness of drug delivery systems for combination therapy. The conclusion emphasizes the potential of polymer conjugates in combination therapy while acknowledging the need for further research and development in this field.

Optimizing the Microenvironment in Solid Polymer Electrolytes by Anion Vacancy Coupled with Carbon Dots.

The practical application of solid polymer electrolyte is hindered by the small transference number of Li+, low ionic conductivity and poor interfacial stability, which are seriously determined by the microenvironment in polymer electrolyte. The introduction of functional fillers is an effective solution to these problems. In this work, based on density functional theory (DFT) calculations, it is demonstrated that the anion vacancy of filler can anchor anions of lithium salt, thereby significantly increasing the transference number of Li+ in the electrolyte. Therefore, flower-like SnS2-based filler with abundant sulfur vacancies is prepared under the regulation of functionalized carbon dots (CDs). It is worth mentioning that the CDs dotted on the surface of SnS2 have rich organic functional groups, which can serve as the bridging agent to enhance the compatibility of filler and polymer, leading to superior mechanical performance and fast ion transport pathway. Additionally, the in-situ formed Li2S/Li3N at the interface of Li metal and electrolyte facilitate the fast Li+ diffusion and uniform Li deposition, effectively mitigating the growth of lithium dendrites. As a result, the assembled lithium metal batteries exhibit excellent cycling stability, reflecting the superiority of the carbon dots derived vacancy-rich inorganic filler modification strategy.

Benzothiadiazole-Based Ordered Mesoporous Polymer as a Versatile, Metal-Free Heterogeneous Photocatalyst.

Visible-light active heterogeneous organophotocatalysts have recently gained considerable interest in organic synthetic community. Ordered mesoporous polymers (OMPs) are highly promising as heterogeneous alternative to traditional precious metal/organic dyes-based photocatalysts. Herein, we report the preparation of a benzothiadiazole functionalized OMPs (BT-MPs) through a "bottom-up" strategy. High ordered periodic porosity, large surface area, excellent stability and rational energy-band structures guarantee the high catalytic activity of BT-MPs. As a result, at least six conversions, e.g., the [3+2] cycloaddition of phenols with olefins, the selective oxidation of sulfides, the C-3 thiocyanation of indole and the aminothiocyanation of ß-keto ester, could be promoted smoothly by BT-MPs. In addition, BT-MPs was readily recovered with well maintaining its photocatalytic activity and could be reused for at least eight times. This study highlights the potential of exploiting photoactive OMPs as recyclable, robust and metal-free heterogeneous photocatalysts.

Constructing an interaction in plant polyphenol-modified carbon fiber with amylopectin-based waterborne polyurethane sizing agent via hydrogen bonding to improve the interfacial performance of carbon fiber/nylon 6 composites.

The adhesive strength between the sizing agent and carbon fiber (CF) plays a crucial role in improving the interfacial properties of composites, while such a vital aspect has been consistently disregarded. In this study, a hyperbranched waterborne polyurethane (HWPU) sizing agent was synthesized from biogenetically raw materials including gallic acid, l-Lysine diisocyanate and amylopectin. Concurrently, hydrogen-bonded cross-linked network structures were established utilizing a botanical polyphenol tannin as coupling agent to effectively connect CF with HWPU. This meticulous process yielded CF/nylon 6 composites with improved properties and their mechanical characteristics were systematically investigated. The findings showcased a noteworthy boost in flexural strength and interlaminar shear strength (ILSS), showing enhancements of 54.6 % and 61.4 %, respectively, surpassing those of untreated CF. Furthermore, the interfacial shear strength (IFSS) test indicated a remarkable 70.3 % improvement. This approach presents a highly promising concept aimed at developing sustainable green waterborne polyurethane sizing agent and improving the interfacial performance of CF composite materials.

Tuning the Mechanical Properties of 3D-printed Objects by Mixing Chain Transfer Agents in Norrish Type I Photoinitiated RAFT Polymerization.

Photoinduced 3D printing via photocontrolled reversible-deactivation radical polymerization (photoRDRP) techniques has emerged as a robust technique for creating polymeric materials. However, methods for precisely adjusting the mechanical properties of these materials remain limited. In this study, we present a facile approach for adjusting the mechanical properties of 3D-printed objects by adjusting the polymer dispersity within a Norrish type I photoinitiated reversible addition-fragmentation chain transfer (NTI-RAFT) polymerization-based 3D printing process. We investigated the effects of varying the concentrations and molar ratios of trithiocarbonate (BTPA) and xanthate (EXEP) on the mechanical properties of the printed materials. Our findings demonstrate that increased concentrations of RAFT agents or higher proportions of the more active BTPA lead to a decrease in Young's modulus and glass transition temperatures, along with an increase in elongation at break, which can be attributed to the enhanced homogeneity of the polymer network. Using a commercial LCD printer, the NTI-RAFT-based 3D printing system effectively produced materials with tailored mechanical properties, highlighting its potential for practical applications.

Single Atom Ag Bonding Between PF3T Nanocluster and TiO2 Leads the Ultra-Stable Visible-Light-Driven Photocatalytic H2 Production.

Atomic Ag cluster bonding is employed to reinforce the interface between PF3T nano-cluster and TiO2 nanoparticle. With an optimized Ag loading (Ag/TiO2 = 0.5 wt%), the Ag atoms will uniformly disperse on TiO2 thus generating a high density of intermediate states in the band gap to form the electron channel between the terthiophene group of PF3T and the TiO2 in the hybrid composite (denoted as T@Ag05-P). The former expands the photon absorption band width and the latter facilitates the core-hole splitting by injecting the photon excited electron (from the excitons in PF3T) into the conduction band (CB) of TiO2. These characteristics enable the high efficiency of H2 production to 16 580 µmol h-1 g-1 and photocatalysis stability without degradation under visible light exposure for 96 h. Compared to that of hybrid material without Ag bonding (TiO2@PF3T), the H2 production yield and stability are improved by 4.1 and 18.2-fold which shows the best performance among existing materials in similar component combination and interfacial reinforcement. The unique bonding method offers a new prospect to accelerate the development of photocatalytic hydrogen production technologies.

Highly Moisture-Resistant Flexible Thin-Film-Based Triboelectric Nanogenerator for Environmental Energy Harvesting and Self-Powered Tactile Sensing.

Triboelectric nanogenerator (TENG) has been demonstrated as a sustainable energy utilization method for waste mechanical energy and self-powered system. However, the charge dissipation of frictional layer materials in a humid environment severely limits their stable energy supply. In this work, a new method is reported for preparing polymer film as a hydrophobic negative friction material by solution blending poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) and polyvinyl chloride (PVC), doping with titanium dioxide (TiO2) nanoparticles, and further surface patterning modification. The P-TENG composed of the PVDF-HFP/PVC/TiO2 composite film with optimized hydrophobic performance (WCA = 124°) achieved an output voltage of 235 V and a short-circuit current of 35 µA, which is approximately three times that of the bare PVDF-HFP-based TENG. Under charge excitation, the transferred charge of the P-TENG can reach 35 nC. When the external load resistance is 5.5 MΩ, the output peak power density can reach 1.4 W m-2. Meanwhile, the hydrophobic surface layer with a rough surface structure enables the device to overcome the influence of water molecules on charge transfer in a humid environment, quickly recover, and maintain a high output. The P-TENG can effectively monitor finger flexibility and strength and realize real-time evaluation of the exercise state and hand fatigue of the elderly and rehabilitation trainers. It has broad application prospects in self-powered intelligent motion sensing, soft robotics, human-machine interaction, and other fields.

Biodegradation study of poly(hydroxybutyrate-co-hydroxyvalerate)/halloysite/oregano essential oil compositions in simulated soil conditions.

The aim of this work was to evaluate the influence of halloysite clay nanoparticles - unmodified (Hal) and organically modified (mHal) - and oregano essential oil (OEO), used as an antimicrobial agent in active packaging, on the biodegradation behavior of poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) films. Five samples were prepared by melt mixing using 3 wt% clay, and 8 wt% and 10.4 wt% OEO. PHBV compositions containing OEO presented the highest rate of biodegradation, achieving 46% of mass loss after aging for 12 weeks in simulated soil. The addition of clay nanoparticles reduced the polymer's biodegradation to 32%. The compositions containing OEO showed a rough and layered surface with visible cracks, indicating degradation occurring through layer-by-layer erosion from the surface. This degradation was confirmed by the chemical changes on the surface of all samples, with a slight decrease in molar masses. The composition containing 8 wt% OEO presented an increase in the crystallization degree as a result of the preferential consumption of amorphous phase, whereas for the compositions containing clay nanoparticles, both crystalline and amorphous regions were degraded at similar rates. Therefore, the combination of additives allows the biodegradation process of PHBV to be controlled for use in the production of active packaging.