Assessing the Impact of Arabinoxylans on Dough Mixing Properties and Noodle-Making Performance through Xylanase Treatment.

This study examined the impact of xylanases, focusing on the hydrolysis of water-extractable (WE-AX) and water-unextractable arabinoxylans (WU-AX) and on the quality and noodle-making performance of flours with varying gluten strengths. Flours categorized as strong (S), medium (M), and weak (W) were treated with two xylanases (WE and WU) at concentrations ranging from 0.01% to 0.2%. Parameters such as solvent retention capacity (SRC), SDS sedimentation volume, dough mixing properties, and noodle characteristics were measured. The SRC revealed that flour S had the highest water-holding capacity, gluten strength, and arabinoxylan content. Xylanase treatment reduced water SRC values in flour S and increased the SDS sedimentation volume, with a greater effect from xylanase WU, indicating the potential enhancement of gluten strength. The impact of xylanases was pronounced at higher enzyme concentrations, with differences in dough mixing properties, resistance, and extensibility of fresh noodles, producing softer and stretchable noodles. Cooked noodles made from flours treated with xylanase were softer and had decreased firmness and chewiness, especially those made from flours S and M. This study concludes that WE-AX and WU-AX influence noodle texture; therefore, controlling their degradation with xylanases can produce noodles with varied textures, depending on the gluten strength of the flour.

Aqueous ozone effects on wheat gluten: Yield, structure, and rheology.

This study investigates the impact of aqueous ozone (AO) on the yield, molecular structure, and rheological properties of wheat gluten separated using the batter procedure. Employing strong gluten flour (SGF) and weak gluten flour (WGF), we demonstrate that AO pretreatment significantly enhances the yield and purity of separated starch and gluten. Surface hydrophobicity, free sulfhydryl groups, Fourier transform infrared spectroscopy (FTIR), Raman, and size exclusion-high-performance liquid chromatography (SE-HPLC) analyses were used to evaluate the effects of AO on the molecular structure of gluten. Our analysis reveals that low concentrations of AO induce specific modifications in gluten proteins. AO treatment increases cross-linking in glutenin macropolymer (GMP), reduces surface hydrophobicity, and stabilizes secondary and tertiary structures. These changes include an increase in ß-sheet content by approximately 9% and a corresponding decrease in ß-turn structures, leading to enhanced viscoelastic properties of the gluten. The research highlights AO's potential as a sustainable and efficient agent in wheat flour processing, offering advancements in both product quality and eco-friendly processing techniques. Future research should optimize AO treatment parameters and explore its effects on different cereal types further to enhance its applicability and benefits in food processing. PRACTICAL APPLICATION: Our work substantially advances the existing knowledge on wheat flour processing by demonstrating the multifaceted benefits of AO pretreatment. We unveil significant improvements in the yield and purity of starch and gluten when compared to conventional separation methods. Moreover, our in-depth analysis of molecular changes induced by AO, including increased cross-linking, alterations in surface hydrophobicity, and modifications in glutenin macropolymer content, provides new insights into how AO affects the viscoelastic properties of gluten. This contribution is pivotal for the development of more efficient, sustainable, and eco-friendly wheat flour processing technologies.

The Influence of Processing Using Conventional and Hybrid Methods on the Composition, Polysaccharide Profiles and Selected Properties of Wheat Flour Enriched with Baking Enzymes.

In this study, a developed wheat flour blend (F), consisting of a high content of non-starch polysaccharides, was fortified with cellulase (C) and a cellulase-xylanase complex (CX) and then processed via conventional and hybrid treatment methods. Dry heating (T), hydrothermal treatment (H) and extrusion processing (E) were applied without or with enzyme addition as hybrid treatments. Proximate composition and polysaccharide profiles selected techno-functional and structural properties of modified wheat flours, were analyzed. Conventional and hybrid treatments induced changes in polysaccharide fraction compositions (especially the arabinoxylans) and the rheology of modified flour. Dry heating caused an inconsiderable effect on flour composition but reduced its baking value, mainly by reducing the elasticity of the dough and worsening the strain hardening index, from 49.27% (F) to 44.83% (TF) and from 1.66 (F) to 1.48 (TF), respectively. The enzymes added improved the rheological properties and baking strength, enhancing the quality of gluten proteins. Hydrothermal enzyme-assisted treatment increased flour viscosity by 14-26% and improved the dough stability by 12-21%; however, the use of steam negatively affected the protein structure, weakening dough stretchiness and elasticity. Extrusion, especially enzyme-assisted, significantly increased the hydration properties by 55-67% but lowered dough stability, fat content and initial gelatinization temperature due to the changes in the starch, mostly induced by the hybrid enzymatic-extrusion treatment. The structure of extruded flours was different from that obtained for other treatments where the peak intensity at 20° was the highest, suggesting the presence of amorphous phases of amylose and lipids. The results can be helpful in the selection of processing conditions so as to obtain flour products with specific techno-functional properties.

Change in volatile profiles of wheat flour during maturation.

The volatile profiles of wheat flour during maturation were examined through headspace solid-phase micro-extraction gas chromatography-mass spectrometry (HS-SPME-GC/MS) combined with electronic nose (E-nose) and electronic tongue (E-tongue) analyses. The wheat flour underwent maturation under three distinct conditions for predetermined durations. While GC/MS coupled with E-tongue exhibited discernment capability among wheat flour samples subjected to varying maturation conditions, E-nose analysis solely relying on principal component analysis failed to achieve discrimination. 83 volatile compounds were identified in wheat flour, with the highest abundance observed in samples matured for 50 d at 25 °C. Notably, trans-2-Nonenal, decanal, and nonanal were the main contributors to the characteristic flavor profile of wheat flour. Integration of HS-SPME-GC/MS with E-tongue indicated superior flavor development and practical viability in wheat flour matured for 50 d at 25 °C. This study furnishes a theoretical groundwork for enhancing the flavor profiles of wheat flour and its derivative products.

Effect of transglutaminase on the structure, properties and oil absorption of wheat flour.

The structure, properties, as well as the oil absorption characteristics of wheat flour (WF) treated with varying concentrations of transglutaminase (TG) (0 U/g âˆ¼ 50 U/g) were characterized. The content of free amino groups in WF modified by TG (TG-WF) decreased and protein aggregated. The isopeptide bonds and disulfide bonds played important roles in protein crosslinking. The thermal stability, the peak viscosity after gelatinization and protein secondary structure stability of TG-WF were improved. In addition, the oil absorption and surface oil content of TG-WF after frying were reduced. TG enhanced the protein-protein interactions in WF, so that protein played barrier roles in the process of high-temperature frying, protecting the starch particles covered by them from the infiltration of oil, thus reducing the oil absorption of TG-WF during frying. Among them, the oil content of TG-WF-30 U/g after frying was the lowest, which decreased by 10.73 % compared with the control group.

Effect of wheat flour particle size on the quality deterioration of quick-frozen dumpling wrappers during freeze-thawed cycles.

To reveal the effect of wheat flour particle size on the quality deterioration of quick-frozen dumpling wrappers (QFDW) during freeze-thawed (F/T) cycles, the components and physicochemical properties of wheat flours with five different particle sizes were determined and compared, along with the changes in texture and sensory properties, water status, and microstructure of QFDW during F/T cycles. Results showed that as particle size decreased, the damaged starch content and B-type starch content increased, the water absorption increased, and the gluten strength decreased. Furthermore, F/T cycles negatively impacted the quality of QFDW, evidenced by decreased texture properties and sensory evaluation score, water redistribution, higher freezable water content, and disruption of gluten network. Notably, QFDW made from larger particle size wheat flours required the shortest duration when traversing the maximum ice crystal formation zone. The QFDW made from larger particle size wheat flours formed a more stable starch-gluten matrix, which resisted the damage caused by ice recrystallization, demonstrating better water binding capacity and F/T resistance. The results may provide theoretical guidance for the study of QFDW quality and the moderate processing of wheat flour in actual production.

Comparison of noodle-making performance of purple-colored whole wheat flour prepared with a jet mill and an ultra-centrifugal mill.

This study explores the impact of milling methods on the quality and noodle-making performance by comparing jet-milled (WF-JM) and ultra-centrifugally milled (WF-UM) purple-colored whole wheat flours. WF-JM exhibits smaller starch granules and a fragmented protein matrix attributed to the increased milling pressure. Physicochemical analyses reveal lower moisture and higher damaged starch in WF-JM. Rheological analyses show lower viscosity in the WF-JM blends. The mixograph results reveal weaker dough-mixing stability and strength for WF-JM. Cooked noodles from WF-JM are uneven, in contrast to uniform WF-UM strands. Blending WF-UM enhances noodle quality. Overall, the noodle-making performance for WF-JM was inferior compared to WF-UM, confirming the significantly negative impact of damaged starch and fragmented protein matrix in whole wheat flour than the positive effect of particle size. This study highlights the complex interplay between milling methods, particle size, and physicochemical attributes, providing insights for optimizing whole wheat flour processing and product quality.

Changes in Lipid Metabolites and Enzyme Activities of Wheat Flour during Maturation.

The maturation of wheat flour is a transformative process that elevates its processing and culinary attributes to their peak performance levels. Despite extensive research on starch and gluten protein modifications, the impact of lipid changes has been largely unexplored. This study addresses this gap by examining the maturation of freshly milled wheat flour at 15 °C, 25 °C, and 40 °C over 60 days, focusing on enzymatic activities-lipase, lipoxidase, and catalase-and lipid metabolites, including free fatty acids, conjugated trienes, p-anisidine value, and total oxidation value. The results of this study showed that free fatty acids continued to increase at all temperatures, with the most significant increase of 50% at 15 °C. The p-anisidine value followed a pattern of initial increase followed by a decline, while conjugated trienes were markedly higher at 40 °C, suggesting temperature's significant influence on lipid peroxidation. Notably, total oxidation values became erratic post 30 days, indicating a shift in oxidative dynamics. This study underscores the correlation between lipid metabolites and enzymatic activities, revealing the enzymes' pivotal role in lipid oxidation. The interplay of temperature and time offers valuable insights for optimizing wheat flour maturation, ensuring superior quality for various applications.

Reduced graphene oxide decorated NiCo2(OH)6 nanoflowers for vortexed assisted dispersive µ-solid-phase extraction of organophosphorus pesticides in baby food cereal, rice and wheat flour.

Food safety is an important issue to protect humane health and improve the life quality. Hence, analysis of the possible contaminants in food samples is essential. A rapid and efficient vortexed-assisted dispersive µ-solid-phase extraction coupled with gas chromatography-mass spectrometry was proposed for simultaneous separation/preconcentration and determination of five commonly used organophosphorus pesticides. Reduced graphene oxide decorated NiCo2(OH)6 nanoflowers as a novel nanostructure was synthetized and introduced for separation of the target pesticides from the wheat flour, rice flour, and baby food cereal samples. The characterization of the nanoflowers was accomplished by SEM-EDX, XRD, and FT-IR techniques. The main factors including pH, the amount of nanoflower, the volume of sample solution, salt concentration (ionic strength), desorption conditions (i.e. desorption solvent type and volume, and desorption time) on the pesticides extraction efficiencies were inquired using matrixed match method. Applying the optimum conditions, the linearity of 0.100-500.000 µg kg-1, LODs and LOQs in the range of 0.03-0.04 µg kg-1 and 0.1 µg kg-1 for the studied food samples were obtained. The repeatability (intra-day precision (n = 5)) of ≤ 2.0 % and reproducibility (inter-day precision, days = 5, n = 3) of ≤3.1 % and were appraise at three concentration levels (10, 50 and 100 µg kg-1 of each analyte). High relative recoveries of 90.0-99.3 % ascertained high potential of the presented method for complex matrix analysis.

Quantitative proteomic analysis for characterization of protein components related to dough quality and celiac disease in wheat flour, dough, and heat-treated dough.

High-sensitivity 4D label-free proteomic technology was used to identify protein components related to gluten quality and celiac disease (CD) in strong-gluten wheat cultivar KX 3302 and medium-gluten wheat cultivar BN 207. The highly expressed storage protein components in KX3302 were high-molecular-weight-glutenin-subunits (HMW-GSs), α-gliadin, and globulin, whereas those in BN207 were γ-gliadin, low-molecular-weight-glutenin-subunits (LMW-GSs) and avenin-like proteins. In addition, BN207 had more upregulated metabolic proteins than KX3302. The abundance of storage proteins increased during dough formation. After heat treatment, the upregulated proteins accounted for 57.53 % of the total proteins, but the downregulated storage proteins accounted for 79.34 % of the total storage proteins. In cultivar KX3302, CD proteins mainly included α-gliadin and HMW-GSs, whereas in BN207, they were mainly γ-gliadin and LMW-GSs. Thermal treatment significantly reduces the expression levels of CD-related proteins. These findings provide a new perspective on reducing the content of CD-related proteins in wheat products.

Atmospheric Cold Plasma as an Alternative to Chlorination in Soft Wheat Flour to Prepare High-Ratio Cakes.

Chlorination is a common chemical modification process of soft wheat flour to prepare high-ratio cakes. Due to safety and labeling concerns of flour chlorination, alternatives to chlorination have been researched. Atmospheric Cold Plasma (ACP) is an emerging technology which is applicable for a wide range of food and biological components, including cereal grain products. The potential of ACP as an alternative to chlorination for high-ratio cakes has not been researched. Soft wheat flour was treated at 50 kV, 60 kV, and 70 kV each for 5, 6, and 7 min and compared to untreated and chlorinated wheat flour. High-ratio cakes were prepared from the chlorinated, treated, and untreated soft wheat flour and their properties were compared. Changes in the flour properties and the high-ratio cakes were observed at different treatment conditions. It was found that after 50 kV, 6 min, 50 kV, 7 min and 60 kV, 6 min had the better flour pasting properties, higher cake volume, and better texture properties as compared to untreated wheat flour and chlorinated wheat flour. This determines the potential of the application of ACP as an alternative to chlorination or to reduce the use of chlorination in soft wheat flour.

Chemical Characteristic and Sensory Evaluation of Biscuit Prepared from Wheat and Aleppo Pine Seeds Flour.

This study aimed to explore the potential use of Aleppo pine seed flour as a nutritious ingredient in biscuit production. Aleppo pine seed flour was blended with wheat flour to create biscuits with varying proportions: 15%, 30%, and 45% Aleppo pine seed flour. The analysis of the chemical composition of the biscuits revealed that increasing the proportion of Aleppo pine seed flour led to higher levels of protein, fat, and ash, while the carbohydrate content decreased. Sensory evaluation showed that biscuits with 15% Aleppo pine seed flour and 85% wheat flour had favorable characteristics in terms of color, flavor, crispness, and overall appeal. These findings indicate that incorporating Aleppo pine seed flour into wheat flour can enhance the nutritional profile of biscuits, offering higher protein, fat, and mineral content. The study suggests that a blend containing 15% Aleppo pine seed flour is optimal for producing biscuits with desirable sensory properties, making it a promising alternative ingredient for healthier biscuit formulations. Overall, this research highlights the potential of Aleppo pine seed flour to improve the nutritional quality of biscuits without compromising their sensory qualities, paving the way for its use in health-conscious baking practices.

Effects of ball milling treated wheat flour and maltodextrin on the texture and oil absorption properties of fried batter-coated cashews and almonds.

In this study, the effects of wheat flour treated with ball milling (BM) and maltodextrin on the oil absorption and textural characteristics of fried batter-coated cashews and almonds (BCAs) were investigated. The result showed that the crystallinity of the starch granules in wheat flour decreased after the BM treatment. Furthermore, the ΔH of the batter decreased as the BM time was elongated, but the addition of maltodextrin had no significant impact on ΔH. Both BM-treated wheat flour and maltodextrin increased the fracturability and decreased the oil content of the fried BCAs' batter. The addition of BM-treated wheat flour and maltodextrin decreased the oil content of the batter from 28.93% to 18.75% for batter-coated cashews and from 30.92% to 18.61% for batter-coated almonds. Overall, the addition of BM-treated wheat flour and maltodextrin in batter is an effective approach to decrease oil content and improve the textural quality of fried BCAs.

Wheat debranning: effects on mycotoxins, phenolic content, and antioxidant activity.

The debranning process, at an industrial scale, was applied to grains of two wheat cultivars to determine its effect on Fusarium mycotoxin content and antioxidant activity. Grain samples from the BRS Marcante and BRS Reponte wheat cultivars, naturally contaminated by Fusarium, were used in the study. The dry wheat samples were processed on the polisher once or twice and evaluated by hardness index, chemical composition (moisture, protein, and ash), deoxynivalenol (DON) and zearalenone (ZON) levels, phenolic content, and antioxidant activity. In the BRS Marcante cultivar, the debranning process only slightly reduced the DON and ZON contents in whole-wheat flours compared with the previous cleaning treatment (no-debranned). In the BRS Reponte cultivar, the DON concentration decreased by 36% at a debranning ratio of 5%, obtained by polishing, compared with prior cleaning treatment (no-debranned). In addition, the polishing reduced the ZON level by 56% compared with the cleaned wheat. The debranning process did not reduce the antioxidant capacity. Therefore, debranning is a suitable technology to obtain safer and healthier food by minimizing the mycotoxin content and retaining antioxidant capacity.

Effect of Different Wheat Sprouting Conditions on the Characteristics of Whole-Wheat Flour.

Research background: Controlled sprouting promotes physiological and biochemical changes in whole grains, improves their nutritional value and offers technological advantages for breadmaking as an alternative to traditional whole grains. The aim of this study is to find sprouting conditions for the grains of Klein Valor wheat variety (Triticum aestivum L.) that would increase the nutritional value without significantly affecting the gluten proteins, which are essential in wholegrain baked goods. Experimental approach: The chemical and nutritional composition, enzymatic activity and pasting properties of the suspensions of unsprouted and sprouted whole-wheat flour were evaluated. Results and conclusions: This bioprocess allowed us to obtain sprouted whole-wheat flour with different degrees of modification in its chemical composition. Sprouting at 25 °C resulted in an observable increase in enzymatic activity and metabolic processes, particularly α-amylases, which significantly affect the starch matrix and the associated pasting properties. Additionally, there was a smaller but still notable effect on the structure of the cell walls and the protein matrix due to the activation of endoxylanases and proteases. In contrast, sprouting at 15 and 20 °C for 24 h allowed for better process control as it resulted in nutritional improvements such as a higher content of free amino acid groups, free phenolic compounds and antioxidant capacity, as well as a lower content of phytates. In addition, it provided techno-functional advantages due to the moderate activation of α-amylase and xylanase. A moderate decrease in peak viscosity of sprouted whole-wheat flour suspensions was observed compared to the control flour, while protein degradation was not significantly prolonged. Novelty and scientific contribution: Sprouted whole-wheat flour obtained under milder sprouting conditions with moderate enzymatic activity could be a promising and interesting ingredient for wholegrain baked goods with improved nutritional values and techno-functional properties. This approach could avoid the use of conventional flour improvers and thus have a positive impact on consumer acceptance and enable the labelling of the product with a clean label.

Health Risk Assessment of Exposure to Heavy Metals in Wheat Flour from Iran Markets: Application of Monte Carlo Simulation Approach.

The significance of flour in the Iranian diet underscores the need to ensure its safety from chemical pollutants. This study aimed to evaluate the potential health risks posed by certain heavy metals, such as Fe, Zn, Cu, Al, Co, Hg, Cr, Ni, Pb, and Cd, in wheat flour available in the Iranian market. A total of 248 flour samples were collected from 11 provinces in Iran during the winter of 2021. The health risks associated with heavy metals in children and adults were evaluated using USEPA health risk assessment guidance for superfund part A and Monte Carlo Simulation. The average concentration of Fe, Zn, Cu, Al, Co, Hg, Cr, Ni, Pb, and Cd, was equal to 30.62 ± 59.24, 4.94 ± 13.64, 1.24 ± 3.08, 2.85 ± 4.98, 0.03 ± 0.01, 0.12 ± 0.03, 1.42 ± 1, 0.23 ± 0.05, 1.71 ± 0.65, and 0.02 ± 0.004 mg/kg dry weight, respectively. Analysis of Fe, Cr, Al, Hg and Cr in all flour samples showed that the average concentration of these metals were greater than the standards levels set by the WHO/FAO. The results of the non-carcinogenic risks (HI) showed that the hazard index values (children: 0.969 ± 1.04, adult: 0.837 ± 0.905) of heavy metals through the consumption of flour to both study population were acceptable. The results of the carcinogenic risks (CR) based on Cd, and Pb concentration showed that the CR values from ingestion of flour to the children and adults population were 1.45 × 10-5 ± 5.08 × 10-5 and 1.26 × 10-5 ± 4.40 × 10-5, respectively. The results of Monte Carlo simulation showed that conventional deterministic health risk evaluation could overestimate risk outcomes. Likewise, Cr has 68.8% and 69.1% probability of non-carcinogenic risk to children and adult, respectively, and 80% and 79.8% probability of CR for adults and children respectively for Pb, suggesting that Cr and Pb is a priority control heavy metals. Therefore, it is recommended to continuously monitor the levels of heavy metals in wheat and its derived food products to ensure food safety.

Effect of oleic acid-rich rapeseed oil on the physicochemical, rheological, and structural characteristics of wheat dough.

Some wheat-based foods require different doses of oil to moderate quality of dough during processing and the influence mechanisms remain unclear. Therefore, the effect of rapeseed oil addition on physicochemical characteristics and fine structure of dough and underlying mechanism were elucidated by rheometer, scanning microscope and molecular spectroscopic method. Results showed that compared with native dough (without exogenous rapeseed oil), the addition of rapeseed oil changed the fine structure, improved extensibility, but reduced viscoelasticity of the dough. Moreover, high addition especially 20 wt% oil (based on wheat flour) significantly changed gelatinization and retrogradation behaviors of the dough, whilst disrupted gluten network and increased random coil content (32.1%) of dough except that decreased its α-helix (21.2%), ß-sheet (23.1%), disulfide bond (7.9 µmol/g) compared with native dough which were 16.3%, 29.2%, 33.1%, 11.0 µmol/g, respectively. Results in the study could provide a certain understanding for application of vegetable oils in wheat-based products.

Flour Functionality, Nutritional Composition, and In Vitro Protein Digestibility of Wheat Cookies Enriched with Decolourised Moringa oleifera Leaf Powder.

This study investigated the potential of decolourised Moringa oleifera leaf powder (D-MOLP) in cookies to meet consumer demand for healthier food options, addressing the issue of low acceptability due to its green colour. D-MOLP and its non-decolourised counterpart (ND-MOLP) were incorporated into wheat flour to produce cookies. The results showed that neither decolourisation nor addition level (2.5 or 7.5%) significantly affected water activity or flour functionality, though slight differences in cookie colour were observed. The Moringa-enriched cookies exhibited an improved spread ratio as well as higher protein, phenolic content, antioxidant activity, and in vitro protein digestibility compared to control cookies. The detected phenolic acids included chlorogenic, ferulic, and fumaric acids, with the D-MOLP cookies showing superior nutritional properties, likely due to nutrient concentration and reduced antinutrients. Notably, glutamic acid was the major amino acid in all the cookies, but only lysine significantly increased across the cookie types. This suggests D-MOLP could be a promising alternative for food enrichment. Future research should address the consumer acceptability, volatile components, and shelf-life of D-MOLP-enriched cookies.

Diagnostic Accuracy of Specific IgE Against Wheat and Rye in Flour-Induced Occupational Asthma.

BACKGROUND: Assessment of IgE-mediated sensitization to flour allergens is widely used to investigate flour-induced occupational asthma. The diagnostic efficiency of detecting specific IgE antibodies (sIgEs) against wheat and rye flour, however, has not been thoroughly compared with other diagnostic procedures. OBJECTIVE: We sought to evaluate the diagnostic accuracy of sIgE against wheat and rye compared with specific inhalation challenge (SIC) with flour as the reference standard. METHODS: This retrospective multicenter study included 264 subjects who completed an SIC with flour in eight tertiary centers, of whom 205 subjects showed a positive SIC result. RESULTS: Compared with SIC, sIgE levels of 0.35 kUA/L or greater against wheat and rye provided similar sensitivities (84% to 85%, respectively), specificities (71% to 78%), positive predictive values (91% to 93%), and negative predictive values (56% to 61%). Increasing the threshold sIgE value to 5.10 kUA/L for wheat and to 6.20 kUA/L for rye provided a specificity of 95% or greater and further enhanced the positive predictive value to 98%. Among subjects with a positive SIC, those who failed to demonstrate sIgE against wheat and rye (n = 26) had significantly lower total serum IgE level and blood and sputum eosinophil counts and a lesser increase in postchallenge FeNO compared with subjects with a detectable sIgE. CONCLUSION: High levels of sIgE against wheat and/or rye flour strongly support a diagnosis of flour-induced occupational asthma without the need to perform an SIC. The absence of detectable sIgE against wheat and rye in subjects with a positive SIC seems to be associated with lower levels of TH2 biomarkers.

Dynamic rheological behavior of high-amylose wheat dough during various heating stages: Insight from its starch characteristics.

The objective of this study was to understand how the dynamic rheological behaviors of high-amylose wheat (HAW) dough during various heating stages measured using a mixolab were affected by the starch properties. At the heating stage of 30 °C - 90 °C, low minimum (C2) and peak (C3) torques were observed for HAW doughs, which resulted from their reduced starch granule swelling. During holding at 90 °C, HAW doughs had low minimum (C4) and C3 - C4 torques, indicating a good resistance to mechanical shear and endogenous enzyme degradation. HAW doughs also had low final (C5) and setback (C5 - C4) torques, consistent with their low starch swelling power and solubility. The increased amylose in HAW starch formed long-chain double-helical B-type polymorph and amylose-lipid complex, which resulted in high starch gelatinization-temperatures and enthalpy change, low swelling power and solubility, low pasting viscosity, and high resistance of swollen granules to mechanical shear and enzyme degradation. The overall patterns of dough-rheological behavior of HAW doughs during heating were similar to their respective starch pasting profiles, indicating that starch was the dominant contributor to the dough rheology during heating. This study provides useful information for food applications and manufacturing of HAW-based products, especially none-fermented products requiring firm texture and low viscosity.