ABSTRACT
Plastics are hazardous to human health, and plastic waste results in environmental pollution and ecological catastrophe. Biobased polymers from renewable sources have recently become promising for developing biodegradable packaging films. Among them, lignocellulosic residue from agricultural biomass is inexpensive, renewable, and biodegradable. This study aims to develop biodegradable films using lignocellulosic residue from wheat straw biomass. The methodology is a green process that solubilizes lignocellulosic chains using Zn2+ ions and crosslinks with Ca2+ ions of different concentrations (200-800 mM). The results reveal that the increase of Ca2+ ions significantly decreases moisture content, water solubility, water vapor permeability, transparency, and elongation of films. The tensile strength is recorded as 6.61 ± 0.07 MPa with the addition of 800 mM of CaCl2, which is approximately 2.5 times higher than commercial polyethylene films. Around 90 % of films biodegrade within a month in soil containing 20 % moisture content. Overall, lignocellulosic residue from wheat straw biomass could be an excellent replacement for synthetic polymer to fabricate strong, transparent, and biodegradable plastic films.
Subject(s)
Calcium , Triticum , Humans , Triticum/chemistry , Biomass , Permeability , IonsABSTRACT
Starch and cellulose are two typical natural polymers from plants that have similar chemical structures. The blending of these two biopolymers for materials development is an interesting topic, although how their molecular interactions could influence the conformation and properties of the resultant materials has not been studied extensively. Herein, the rheological properties of cellulose/starch/ZnCl2 solutions were studied, and the structures and properties of cellulose-starch hybrid films were characterized. The rheological study shows that compared with starch (containing mostly amylose), cellulose contributed more to the solution's viscosity and has a stronger shear-thinning behavior. A comparison between the experimental and calculated zero-shear-rate viscosities indicates that compact complexes (interfacial interactions) formed between cellulose and starch with ≤50 wt % cellulose content, whereas a loose structure (phase separation) existed with ≥70 wt % cellulose content. For starch-rich hybrid films prepared by compression molding, less than 7 wt % of cellulose was found to improve the mechanical properties despite the reduced crystallinity of the starch; for cellulose-rich hybrid films, a higher content of starch reduced the material properties, although the chemical interactions were not apparently influenced. It is concluded that the mechanical properties of biopolymer films were mainly affected by the structural conformation, as indicated by the rheological results.
Subject(s)
Cellulose/chemistry , Chlorides/chemistry , Starch/chemistry , Water/chemistry , Zinc Compounds/chemistry , Polymers/chemistry , Solutions/chemistryABSTRACT
The aim of this study was to assess the potential subacute toxicity of zinc oxide (ZnO) nanoparticles (NPs) in Wistar rats in comparison with reference toxicant, zinc chloride (ZnCl2), of a non-nanoparticulate form. We therefore studied the relationships between zinc (Zn) accumulation, liver and kidney trace element levels, and plasmatic biochemical parameters. Rats in all groups were treated by intraperitoneal injection of ZnO NPs and/or ZnCl2 solution (25 mg/kg) every other day for 10 days. The contents of trace element in the liver and kidney were slightly modulated after ZnO NPs and/or ZnCl2 solution exposure. The same treatment increased the aspartate aminotransferase activity and uric acid concentration. However, ZnO NPs or ZnCl2 solution decreased the creatinine levels, whereas the combined intake of ZnO NPs and ZnCl2 decreased the glucose concentration. Interestingly, the analysis of the lyophilized powder of liver using the x-ray diffractometer showed the degradation of ZnO NPs in ZnO-treated group, instead there is a lack of NPs ZnO biosynthesis from the ZnCl2 solution injected in rats. These investigations suggest that combined injection of ZnO NPs and ZnCl2 solution has a possible toxic effect in rats. This effect could be related to Zn(2+) ion release and accumulation of this element in organs. Our findings provide crucial information that ZnO appeared to be absorbed in the organs in an ionic form rather than in a particulate form.