Role of Whey Protein in the Treatment Outcome of Maxillofacial Trauma Patients: An Interventional Study.

Introduction: Maxillofacial fracture severely affects the diet of the patients leading to reduction of body weight. Facial trauma affects the muscles of mastication and the bones of face leading to reduction in bite force. The purpose of our study was to investigate the effect of whey protein supplement in the postoperative period of maxillofacial trauma patients with respect to body weight, bite force and callus formation. Methodology: Patients were divided into control group and study group having 20 patients each. The control group received usual modified diet for maxillofacial fracture and study group received same diet along with whey protein for 6 weeks. Results: There was mean weight loss of 3.15 kg in control group whereas there was no weight loss of in the study group. There was statistically significant increase in bite force in the study group compared to the control group with p value < 0.05. Early callus formation was seen in study group compared to control group. Conclusion: Our results showed that patients who were supplemented with whey protein had no loss of body weight, better masticatory efficiency, better healing of the fracture sites and overall early recovery.

Oral functions in adult persons with spinal muscular atrophy compared to a healthy control group: a prospective cross-sectional study with a multimodal approach.

BACKGROUND: Oral function tests have been shown to reliably detect impaired bulbar function in adults with spinal muscular atrophy (SMA). Although not routinely recorded, it is known that persons with SMA are affected to varying degrees. Detecting differences in bite and tongue force, endurance, and maximum mouth opening has become particularly promising since the introduction of causal therapy for SMA. This study aimed to compare oral function among adult persons with SMA with different SMA types, walking abilities, and treatment status to a healthy control group. METHODS: Data from oral function tests conducted on 58 persons with SMA and 45 healthy individuals were analyzed. Differences in oral function between SMA subgroups were pairwise tested and compared to the healthy control group using Wilcoxon rank sum tests. RESULTS: In an overall comparison, three out of five oral function tests revealed lower values for the SMA group compared to the control group. Subgroup analyses indicated lower scores for most oral function tests in non-ambulatory, untreated patients with SMA type 2 compared to controls. Ambulatory, treated patients with SMA type 3 achieved strength and endurance values comparable to those of healthy individuals. CONCLUSIONS: The impairment of oral function varies across persons with SMA. Routine measurement of oral function is warranted to determine individual bulbar involvement stages. Further evaluation should be scheduled if indicators such as restricted maximum mouth opening arise. Trial registration DRKS, DRKS00015842. Registered 30 July 2019, https://drks.de/register/de/trial/DRKS00015842/preview .

Assessing masseter muscle volume and activity in relation to craniofacial morphology: a 3D CBCT study.

INTRODUCTIONS: Understanding the factors influencing craniofacial structure growth is crucial for addressing craniofacial deformities. This study evaluates masseter muscle volume, activity, and maximum bite force across different skeletal malocclusion groups and aims to evaluate the masseter muscle volume, activity, and maximum bite force (BF) according to different skeletal malocclusion groups. METHODS: This study aimed to assess masseter muscle volume, activity, and maximum bite force (BF) across different skeletal malocclusion groups in 60 young adults (18-30 years) seeking treatment at Kirikkale University Faculty of Dentistry. Cone-Beam Computed Tomography (CBCT) imaging, radiological measurements, surface electromyography (sEMG), and force sensor measurements were employed. RESULTS: Results revealed significant differences in sEMG measurements based on sagittal classification. Vertical direction groups showed notable results in muscle volume and BF, though no significant differences were observed in sEMG values. A correlation was identified between BF and sEMG, but no correlation was found between muscle volume and other parameters. CONCLUSIONS: The findings obtained in this study suggest that the significant relationship between EMG and sagittal skeletal classification could be a valuable diagnostic tool. However, concerns about reliability were raised due to uneven distribution in muscle volume and BF among vertical direction groups. The lack of significant results in muscle volume, sEMG, and BF was attributed to CBCT limitations in soft tissue imaging and the small sample size, emphasizing caution in interpreting the findings.

Estimated and in vivo measurements of bite force demonstrate exceptionally large bite forces in parrots (Psittaciformes).

Jaw morphology and function determine the range of dietary items that an organism can consume. Bite force is a function of the force exerted by the jaw musculature and applied via the skeleton. Bite force has been studied in a wide range of taxa using various methods, including direct measurement, or calculation from skulls or jaw musculature. Data for parrots (Psittaciformes), considered to have strong bites, are rare. This study calculated bite force for a range of parrot species of differing sizes using a novel method that relied on forces calculated using the area of jaw muscles measured in situ and their masses. The values for bite force were also recorded in vivo using force transducers, allowing for a validation of the dissection-based models. The analysis investigated allometric relationships between measures of body size and calculated bite force. Additionally, the study examined whether a measure of a muscle scar could be a useful proxy to estimate bite force in parrots. Bite force was positively allometric relative to body and skull mass, with macaws having the strongest bite recorded to date for a bird. Calculated values for bite force were not statistically different from measured values. Muscle scars from the adductor muscle attachment on the mandible can be used to accurately predict bite force in parrots. These results have implications for how parrots process hard food items and how bite forces are estimated in other taxa using morphological characteristics of the jaw musculature.

A Comparison of Oral Function in Older In- and Outpatients: An Observational Study.

(1) Background: Insufficient data exist regarding oral function among older adults in Europe. Therefore, we aimed to assess and compare oral function between older in- and outpatients and identify predictors of low masticatory performance. (2) Methods: Patients were consecutively recruited from the outpatient center (n = 31) and the inpatient geriatric department (n = 31) at a tertiary University Hospital in Switzerland in 2023. Assessments on oral function included the total number of intraoral eruptive teeth, number of supporting zones with dentures, maximal bite force (Dental Prescale II, Fuji Film Corp., Tokyo, Japan), and masticatory performance (Hue-Check Gum©, University of Bern, Bern, Switzerland) using a visual (SA1-SA5) and a digital (SD_Hue) scale. The visual and digital assessment of masticatory performance showed a strong correlation (Kendall tau = 0.83). Low masticatory performance was defined as SA-Grade 1-2 (vs. SA3-SA5 as reference). In a multivariate model adjusting for age, sex, and clinical setting, we investigated associations of maximal bite force, few eruptive teeth, and few supporting zones with low masticatory performance. (3) Results: Mean age was 81.9 (standard deviation (sd) 5.2) years, and 62.9% were female. Overall, maximal bite force was 247 N (sd 261). A total of 39 patients (63.9%) had a low masticatory performance, 62.9% a low maximal bite force, and 50% a low number of eruptive teeth (<10). Masticatory performance, number of eruptive teeth, and maximal bite force did not significantly differ between in- and outpatients. The number of supporting zones was significantly higher in outpatients compared to inpatients (median 4, interquartile range (IQR) 4-4; vs. 4, IQR 2-4; p = 0.03). In the multivariate model, maximal bite force and a low number of eruptive teeth were independently associated with low masticatory performance (adjusted odds ratio 7.4 (95% CI, 1.8-30.4; p < 0.01), and OR 7.8 (95% CI, 1.7-36.4; p < 0.01), respectively). (4) Conclusions: Impaired oral function is highly prevalent in both European older in- and outpatients to a similar degree. The association of low masticatory performance with maximal bite force and with a low number of eruptive teeth may indicate that a basic screening should include either of these parameters to identify impaired oral function.

Oral health self-perception, maximum bite force and masticatory efficiency in patients with overdentures with different attachment systems-A crossover study.

BACKGROUND: The literature is unclear about how the different attachment systems for overdentures impact the maximum bite force, the masticatory efficiency and how this impact in the oral health self-perception in patients. OBJECTIVE: To evaluate the effect of two attachment systems (O-ring and Locator) for mandibular overdenture using single implant on quality of life, maximum bite force (BF) and masticatory efficiency (ME). METHODS: Twenty-eight completely edentulous denture wearers with a mandibular symphysis implant were randomly selected and allocated into two groups in a crossover study, considering O-ring and Locator attachment types. The quality of life and self-perception of oral health were assessed using the Oral Health Impact Profile (OHIP-Edent) and Geriatric Index of Determination of Oral Health (GOHAI) questionnaires, respectively. BF was measured using a gnathodynamometer and ME by chewing silicone cubes and almonds in different numbers of cycles. RESULTS: There was no difference between the attachment systems about self-perceived oral health and impact on quality of life (p > .05). The O-ring-type system obtained a significantly higher BF than the locator-type system (p = .04). Regardless of the food chewed, no statistically significant difference was observed with the type of attachment (p > .05). The ME was directly proportional to the masticatory cycles only for almonds (p < .01). CONCLUSIONS: Locator and O-ring inserts had a similar impact on patients' quality of life, self-perception of oral health and ME. Additionally, the O-ring system exhibited superior properties in the BF.

Rheumatoid Arthritis and Osteoarthritis in Adult Women: A Functional Approach to the Stomatognathic System.

Rheumatoid arthritis and osteoarthritis both affect the articular cartilage, and are characterized by signs and symptoms that can affect the functions of the human body. This cross-sectional observational study evaluated electromyographic activity in the masseter and temporalis muscles, molar bite force, and mandibular mobility in adult women with rheumatoid arthritis or osteoarthritis. A total of 42 women were distributed into 3 groups: rheumatoid arthritis group (ARG, n=14); osteoarthritis group (OAG, n=14); and a healthy control group (CG, n=14). Electromyography was used to evaluate mandibular tasks at rest, right and left laterality, protrusion, and dental clenching during maximum voluntary contraction, with and without parafilm, and a dynamometer was used to analyse the right and left molar bite forces. A digital caliper was used to measure the range of mandibular movement for maximum mouth opening, right and left laterality, and protrusion. Statistical analyses were performed, including analysis of variance and Tukey's test (P<0.05). Electromyography showed no significant differences between the groups when evaluating the masticatory muscles during the mandibular tasks. Significant difference was observed between the ARG and CG, however, in the maximum right (P=0.007) and left (P=0.02) molar bite forces. Significant difference was observed in the maximum mouth opening of the ARG and OAG groups compared with that of the CG (P=0.009), suggesting that adult women with rheumatoid arthritis or osteoarthritis experience functional alterations in the stomatognathic system, particularly in molar bite force and maximum mouth opening.

Obturator prostheses with intramucosal retention system in patients with maxillectomy.

PURPOSE: To evaluate the intramucosal retention system in patients' masticatory efficiency and quality of life in this case series. MATERIAL AND METHODS: A total of 3 individuals with maxillectomy were included for rehabilitation with a complete obturator prostheses with an intramucosal retention system (OPI). The complete obturator prostheses was made for 60 days, and electromyography assessments and bite force were applied before, after 30, 60, and 90 days of surgery and prostheses installation. The University of Washington Quality of Life Questionnaire (UW-QoL) and the Obturator Functional Scale (OFS) were also administered at baseline and in the same follow-up periods. The electromyography was evaluated on both sides of the masseter, temporalis, and buccinator muscles while chewing hard and soft food. The maximum bite force was recorded in the central incisors and both sides of the first molar region. RESULTS: Bite force values increased in the first molar region, and muscular electrical activity remained constant. Items related to the taste and swallowing of the UW-QOL impacted. Most OFS questionnaire data responses indicated that patients improved in swallowing liquid foods and appearance. CONCLUSIONS: The rehabilitative capacity improves masticatory efficiency and QoL in adults maxilectomized and rehabilitated with OPI analysis in the study. Further clinical studies should be encouraged to determine the effectiveness of this retentive system.

Effects of vibratory feedback stimuli through an oral appliance on sleep bruxism: A 14-week intervention trial.

Background/purpose: Various biofeedback stimulation techniques for managing sleep bruxism (SB) have recently emerged; however, the effect of the successive application of vibratory feedback stimulation has not been clarified. This study aimed to elucidate the effect of vibration feedback stimulation via an oral appliance (OA) on SB. Materials and methods: This prospective, single-arm, open-label intervention study included 20 participants diagnosed with "definite" SB who wore a specially designed OA for 98 nights at home. A force-based SB detection system triggered a vibrator attached to the OA. Vibratory stimulation was withheld during the first 3-week adaptation period (weeks 1-3), applied during the 9-week stimulation period (weeks 4-12), and withheld again during the post-stimulation period (weeks 13-14). The number and duration of SB events per hour of sleep were calculated based on piezoelectric signals recorded with the OA-based vibration feedback device and compared between weeks 3 and 4, 8, 12, and 14 and between weeks 12 and 14 using the Friedman test (post-hoc test with Bonferroni correction). Results: The duration of SB events significantly decreased after vibratory stimulation (weeks 3 versus 4, 8, and 12: P < 0.001, P = 0.026, and P = 0.033, respectively) and then significantly increased upon cessation of vibratory stimulation after the stimulation period (weeks 12 versus 14: P < 0.001). Conclusion: Contingent vibratory stimulation through an OA-based vibration feedback device may suppress SB-related masticatory muscle activity continuously for 9 weeks and may be an effective alternative for managing SB.

Temporary Hydrostatic Splint Therapy and Its Effects on Occlusal Forces.

Background and objectives: This study analyzed and compared the distribution patterns of occlusal forces using T-Scan III before and after the hydrostatic temporary oral splint (Aqualizer Ultra) therapy in healthy subjects and subjects with temporomandibular disorders (TMDs). Materials and Methods: Fifty-one subjects were divided into groups based on anamnesis and responses to the Fonseca questionnaire. The first group, non-TMDs group (n = 19), and the second group, TMDs group (n = 32), had mild-to-severe TMDs, as identified by the Fonseca questionnaire. The non-TMDs group had an average age of 25.4 years (SD = 4.8, range 20-38) with 15 females (78.95%) and 4 males (21.05%). The TMDs group had an average age of 27.4 years (SD = 7.0, range 22-53) with 25 females (78.125%) and 7 males (21.875%). T-Scan III device was used for occlusal analysis before and after hydrostatic splint usage. Results: Significant differences were observed in the TMDs group for anterior and posterior right percentages of forces before and after hydrostatic splint usage. The analysis of force distribution per sector before and after hydrostatic splint therapy showed no significant differences in the non-TMDs group. Analysis of force distributions in the entire study population before and after hydrostatic splint therapy showed significant differences in the anterior and posterior right regions. Occlusal force increased by 32-56% in the front region and decreased in the posterior area after hydrostatic splint usage. Conclusions: Hydrostatic splint therapy is recommended as a part of full-mouth rehabilitation treatment for all patients regardless of the severity of TMDs.

Effects of Occlusal Contact on Maxillary Alveolar Bone Morphology in Patients with and without Anterior Open Bite: A Cross-Sectional Study.

Background/Objectives: Anterior open bite (AOB) is characterized by the absence of occlusal contact between the maxillary and mandibular anterior teeth, while the posterior teeth are in contact when occluded. Here, we aimed to clarify the difference in maxillary alveolar bone morphology in adult patients with and without AOB. Methods: This cross-sectional study was conducted on 50 adults aged 18-39 years: 25 patients without AOB (control group; 13 males and 12 females; age: mean ± standard deviation [SD], 22.2 ± 4.5 years) and 25 patients with AOB (9 males and 16 females; age: 24.2 ± 6.4 years). Using cone-beam computed tomography images, the height of the maxillary alveolar bone crest in the anterior and posterior teeth and thickness of the alveolar cortical bone on the labial and palatal sides were measured and compared between the two groups. An independent t-test and Pearson's correlation analysis were used to examine statistical significance (p < 0.05). Results: The AOB group showed a significantly longer (p = 0.016) posterior alveolar crest and thinner cortical bone on the buccal (p < 0.001) and lingual (p = 0.009) sides of the anterior region and the buccal (p = 0.006) sides of the posterior region than the control group did. Moreover, a significant negative correlation (p = 0.046; r = -0.403) was observed between bite force and cortical bone thickness on the buccal side of the posterior region in the AOB group. Conclusions: It is suggested that the absence of occlusal contact in the anterior area influences the alveolar bone morphology of the maxilla.

Functional adaptation of the infant craniofacial system to mechanical loadings arising from masticatory forces.

The morphology and biomechanics of infant crania undergo significant changes between the pre- and post-weaning phases due to increasing loading of the masticatory system. The aims of this study were to characterize the changes in muscle forces, bite forces and the pattern of mechanical strain and stress arising from the aforementioned forces across crania in the first 48 months of life using imaging and finite element methods. A total of 51 head computed tomography scans of normal individuals were collected and analysed from a larger database of 217 individuals. The estimated mean muscle forces of temporalis, masseter and medial pterygoid increase from 30.9 to 87.0 N, 25.6 to 69.6 N and 23.1 to 58.9 N, respectively (0-48 months). Maximum bite force increases from 90.5 to 184.2 N (3-48 months). There is a change in the pattern of strain and stress from the calvaria to the face during postnatal development. Overall, this study highlights the changes in the mechanics of the craniofacial system during normal development. It further raises questions as to how and what level of changes in the mechanical forces during the development can alter the morphology of the craniofacial system.

Laboratory Validation of a Novel Indigenously Developed Bite Force Measuring Device.

INTRODUCTION: It is critical to measure the maximum voluntary bite force of patients receiving restorative dentistry. A new device known as "BYTE" has been developed indigenously to measure bite force in humans. The purpose of this study is to evaluate the BYTE device's consistency and accuracy in a lab setting. METHODOLOGY: Testing and calibration were done in the laboratory. The calibration machine with load cell pressed the biting part of the device with various forces from 3 N to 444 N in 3 N increments for two to three seconds each. The recorded force value in Newton by the device was noted down. RESULTS: At numerous standard loads, the minimum accuracy error is 0.333 N, while the maximum is 1.667 N. It marginally underestimates the load with an average accuracy error of 0.833 N. CONCLUSION: The calibration report showed that the BYTE device is precise and reliable and can be used to measure maximum bite force.

Gonial angle and late implant loss: A retrospective clinical study.

PURPOSE: Occlusal overload can cause late implant loss. However, whether the magnitude of the occlusal force is a risk factor for late implant loss remains unclear. Thus, this clinical study aimed to determine the relationship between the gonial angle (GoA), which is associated with the magnitude of occlusal force, and late implant loss. METHODS: All implants with fixed prostheses placed at the Niigata University Hospital between April 2006 and August 2019 were included in this retrospective study. The implants with and without late loss were compared. Relevant variables, including smoking habits, diabetes mellitus status, remaining dentition, implant length and diameter, prosthesis design, retention systems, splinting, and GoA were assessed. Log-rank test and Cox proportional hazards regression analysis were used to estimate the adjusted hazard ratio (aHR) and to calculate the corresponding 95% confidence intervals (CI) for late implant loss. RESULTS: A total of 919 patients (349 men and 570 women) with 2512 implants were included in this study. Cox proportional hazards regression analysis revealed that a 10° decrease in the GoA (aHR, 1.588; 95% CI, 1.115-1.766; P = 0.010), smoking habits (aHR, 3.909; 95% CI, 2.131-7.168; P < 0.001), and male sex (aHR, 2.584; 95% CI, 1.376-4.850; P = 0.003) were significantly associated with late implant loss. CONCLUSIONS: Within the limitations of this retrospective study of 2512 implants, smaller GoA, smoking habits, and male sex were risk factors for late implant loss.

Unravelling the Complexities of Bite Force Determinants in Paediatric Patients: A Literature Review.

The amount of maximum voluntary bite force (MVBF) is determined by the combined action of the jaw elevator muscles, which are altered jaw biomechanics and reflex processes. Bite force (BF) measurements can yield valuable information on the activity and function of the jaw muscles. The accuracy of biting force measurements depends on several variables, including age, gender, malocclusion, dental caries, dental prostheses and temporomandibular joint (TMJ). This information is essential for evaluating the development and function of the masticatory system, identifying potential abnormalities or impairments and guiding appropriate treatment interventions for paediatric patients. The aim of this article is to review the literature on the factors affecting bite force and the importance of these factors in assessing dental development and guiding interventions for paediatric patients with bite force-related issues. Additionally, establishing normative values for bite force in different age groups can aid in monitoring growth and detecting any deviations from expected patterns. Measuring bite force in paediatric patients is significant in comprehensive oral health assessment and management.

Craniometric Characteristics of Selected Carnivora Species Kept in Captivity in Relation to Bite Force and Bending Strength of the Upper Canines.

The aim of this study was to analyse the bite forces of seven species from three carnivore families: Canidae, Felidae, and Ursidae. The material consisted of complete, dry crania and mandibles. A total of 33 measurements were taken on each skull, mandible, temporomandibular joint, and teeth. The area of the temporalis and masseter muscles was calculated, as was the length of the arms of the forces acting on them. Based on the results, the bite force was calculated using a mathematical lever model. This study compared the estimated areas of the masticatory muscles and the bending strength of the upper canines among seven species. A strong correlation was found between cranial size and bite force. The results confirmed the hypothesis that the weight of the animal and the size of the skull have a significant effect on the bite force.

Comparative Study on the Duration and Efficacy of Various Botulinum Toxin Type A Injections for Reducing Masseteric Muscle Bite Force and Treating Facial Wrinkles.

OBJECTIVE: Botulinum toxin serotype A (BoNT/A) is widely used for minimal invasive aesthetic treatments. Different brands of BoNT/A exhibit structural variations. The aim of this study was to compare the duration and efficacy of various BoNT/A brands available in Thailand for reducing bite force and treating wrinkles. METHODS: Fifty participants were randomly assigned to one of five groups, with each group receiving a different BoNT/A brand, namely, incobotulinumtoxinA (IncoA), onabotulinumtoxinA (OnaA), abobotulinumtoxinA (AboA), letibotulinumtoxinA (LetiA), and prabotulinumtoxinA (PraboA). BoNT/A was administered to the masseter muscle and the upper face. Bite force was measured before injection and at 2, 4, 8, 12, 16, 20, and 24 weeks post-injection. Evaluation scores for wrinkle improvement were assessed after the treatment. RESULTS: The most significant reduction in bite force occurred between 2 and 4 weeks post-injection. PraboA demonstrated the most substantial reduction in bite force, while IncoA had the least effect. However, the percentage of bite force reduction did not exhibit statistical significance between BoNT/A types. Additionally, the reduction in bite force for all BoNT/A types was reversed at 4 months post-injection. More than half of the participants experienced improvement beyond 16 weeks. CONCLUSIONS: The structural differences among BoNT/A brands did not significantly affect the longevity and efficacy of bite force reduction and wrinkle treatment. TRIAL REGISTRATION: ClinicalTrials.gov identifier: TCTR20211205001 (registered 4 Dec 2021).

Pain-free bite force in a healthy population: Within-session test-retest reliability in different sitting positions.

BACKGROUND: Pain-free bite force (PFBF) is a promising measure to evaluate bite function in temporomandibular disorders (TMDs), yet the reliability of the measure is unknown. OBJECTIVES: Establish the (1) within-session test-retest reliability of PFBF in a healthy population for a single and mean of three trials in supported and unsupported sitting; (2) standard error of measurement (SEM) and minimal detectable change (MDC). METHODS: Thirty healthy participants (n = 15 female, mean [SD] age = 34.4 [11.0] years) completed two sessions (30-60 min apart) comprising three PFBF trials on each side, in both supported and unsupported sitting, to provide data for 60 (30 participants × two sides) test-retest assessments. Test-retest reliability for the first trial and mean of three trials in each position were determined using intraclass correlation coefficients (ICCs), before calculating the corresponding SEM and MDC for males (M) and females (F) respectively. RESULTS: Within-session reliability was considered excellent for a single trial in supported sitting (ICC = 0.85; SEM M/F = 99/84 N; MDC M/F = 275/232 N) and unsupported sitting (ICC = 0.91; SEM M/F = 72/59 N, MDC M/F = 200/163 N), and for a mean of three trials in supported sitting (ICC = 0.89; SEM M/F = 66/79 N, MDC M/F = 182/220 N) and unsupported sitting (ICC = 0.92; SEM M/F = 64/59 N, MDC M/F = 177/164 N). CONCLUSION: Single and a mean of three trials in supported and unsupported sitting appear reliable methods to measure PFBF in a healthy population. Testing PFBF using a mean of three trials in unsupported sitting appears superior over other methods though due to higher test-retest reliability, and lower SEM and MDC. Future studies should examine the reliability of PFBF in TMD populations.

Finite Element Analysis of Fixed Orthodontic Retainers.

The efficacy of retainers is a pivotal concern in orthodontic care. This study examined the biomechanical behaviour of retainers, particularly the influence of retainer stiffness and tooth resilience on force transmission and stress distribution. To do this, a finite element model was created of the lower jaw from the left to the right canine with a retainer attached on the oral side. Three levels of tooth resilience and variable retainer bending stiffness (influenced by retainer type, retainer diameter, and retainer material) were simulated. Applying axial or oblique (45° tilt) loads on a central incisor, the force transmission increased from 2% to 65% with increasing tooth resilience and retainer stiffness. Additionally, a smaller retainer diameter reduced the uniformity of the stress distribution in the bonding interfaces, causing concentrated stress peaks within a small field of the bonding area. An increase in retainer stiffness and in tooth resilience as well as a more oblique load direction all lead to higher overall stress in the adhesive bonding area associated with a higher risk of retainer bonding failure. Therefore, it might be recommended to avoid the use of retainers that are excessively stiff, especially in cases with high tooth resilience.

A Preliminary Report of Maximum Voluntary Bite Force of Young Indian Population.

Introduction: The measurement of bite force is increasingly gaining importance in dentistry. This preliminary report evaluates the maximum voluntary bite force (MVBF) of young healthy individuals with normal occlusion and correlates the effect of age and gender with the maximum bite force (MBF). Materials and Methods: 405 participants in the age group of 18 to 40 years were selected from the outpatient department meeting inclusion and exclusion criteria. MVBF was measured with the help of a digital device called "Byte" at incisors, right first molar, and left first molar region. Results: There was a strong correlation between age with bite force. Bite force increased with age. Males had more bite force than females. The posterior region had higher bite force than the anterior region. Conclusion: Measurement of bite force is very important for every patient undergoing restorative treatment. The "Byte" device was found to be very efficient.