Periselectivity and ambimodal transition states in cycloadditions of tetrachloro-o-benzoquinone with 6,6-dimethylfulvene.

The reaction mechanism of cycloadditions of tetrachloro-o-benzoquinone with 6,6-dimethylfulvene were systematically investigated with density functional theory calculations. It was found that conditional primary interactions stabilize the ambimodal transition states in the endo pathways. Ambimodal transition states lead to [6 + 4]/[4 + 2] adducts or [4 + 2]/[2 + 4] adducts, which interconvert through 3,3-sigmatropic shift reactions. The substituent effects on periselectivity were also investigated.

Higher-Order Electrocyclizations in Biological and Synthetic Processes.

In general, electrocyclizations follow the Woodward-Hoffmann's rules of conservation of orbital symmetry. These rules have been extensively verified in low-order processes, both in thermal and photochemical reactions, up to eight π-electrons. However, when the number of π-electrons in the system increases, some deviations of that general rules can be found. This focused review highlights the main features of reported higher-order electrocyclizations involving 10, 12, 14, 16 and 18 π-electrons. Some of these examples constitute useful intermediates in the synthesis of biologically active compounds. When computational studies were not included in the reported examples, DFT calculations have been performed to be included in this review. Analysis of the respective pericyclic topologies shows the importance of computational tools for understanding the selectivity observed experimentally.

Quantum Mechanical Elucidation on [3+2] cycloaddition reaction of aryl nitrile oxide with cyclopentenones.

The [3 + 2] cycloaddition (32CA) reaction of benzonitrile oxide (BNO) with 4-substituted 4-hydroxy-2-cyclopentenone has been investigated using molecular electron density theory (MEDT) at the Density Functional Theory (DFT) B3LYP/6-31G (d), M06/6-311G (d,p) and M06-2X/6-311++G (d,p) levels. The present theoretical computations indicate that the reaction of BNO with 4-substituted 4-hydroxy-2-cyclopentenones is via [3 + 2] cycloaddition, where the three atom component (TAC) chemo-selectively adds across the alkene functionality in the 2-cyclopentenones (Path A). Analysis of the electrophilic PA+ and nucleophilic PA- Parr functions at the different reaction sites in the alkene counterpart indicates that the aryl nitrile oxides add across the atomic centers with the highest Mulliken atomic spin densities. The results reported in this study are in good agreement with previous experimental work. The GEDT calculations unravel the low polar character of the [3 + 2] cycloaddition reactions. This reaction occurs with poor enantioselectivity, but a high degree of stereo-, peri-, diastereo, and regioselectivity is seen for the reaction of the BNO with 4-hydroxy-4-methyl-2-cyclopentenones. The regioselectivity of the reactions is the same in all the solvents investigated.

Ambimodal Transition States in Diels-Alder Cycloadditions of Tropolone and Tropolonate with N-Methylmaleimide*.

The Diels-Alder reactions of tropolone and its conjugate base with N-methylmaleimide have been explored computationally and experimentally. Previous studies of the [4+2] cycloaddition under basic conditions show that both endo- and exo-products are obtained in similar, but variable amounts. Density functional theory (ωB97X-D) explorations of potential energy surfaces, and molecular dynamics trajectories show that the reaction involves an ambimodal transition state for the reaction of the ammonium tropolonate with N-methylmaleimide, and that similar amounts of endo- and exo-products are obtained. The thermal reaction, studied experimentally in detail here for the first time, is predicted to form the endo-adduct through an ambimodal transition state. The exo-adduct can be formed from the same transition state, but requires a hydrogen shift, that hinders this reaction dynamically. Longer reaction times give a small excess of the exo-product, which is thermodynamically more stable.

Periselectivity in the Aza-Diels-Alder Reaction of 1-Azadienes with α-Oxoketenes: A Combined Experimental and Theoretical Study.

Inversions in the periselectivity of formal aza-Diels-Alder cycloadditions between α-oxoketenes generated by a thermally-induced Wolff rearrangement and 1-azadienes were observed experimentally as a function of the α-oxoketene and the 1-azadiene, as well as the reaction temperature and time. Some unexpected inversion in the diastereoselectivity was observed, too. These variations in selectivities were fully rationalized by computational modeling using density functional theory (DFT) methods.

The [4+2]-Cycloaddition of α-Nitrosoalkenes with Thiochalcones as a Prototype of Periselective Hetero-Diels-Alder Reactions-Experimental and Computational Studies.

The [4+2]-cycloadditions of α-nitrosoalkenes with thiochalcones occur with high selectivity at the thioketone moiety of the dienophile providing styryl-substituted 4H-1,5,2-oxathiazines in moderate to good yields. Of the eight conceivable hetero-Diels-Alder adducts only this isomer was observed, thus a prototype of a highly periselective and regioselective cycloaddition has been identified. Analysis of crude product mixtures revealed that the α-nitrosoalkene also adds competitively to the thioketone moiety of the thiochalcone dimer affording bis-heterocyclic [4+2]-cycloadducts. The experiments are supported by high-level DFT calculations that were also extended to related hetero-Diels-Alder reactions of other nitroso compounds and thioketones. These calculations reveal that the title cycloadditions are kinetically controlled processes confirming the role of thioketones as superdienophiles. The computational study was also applied to the experimentally studied thiochalcone dimerization, and showed that the 1,2-dithiin and 2H-thiopyran isomers are in equilibrium with the monomer. Again, the DFT calculations indicate kinetic control of this process.

A computational study of the addition of ReO3L (L = Cl(-), CH3, OCH3 and Cp) to ethenone.

The periselectivity and chemoselectivity of the addition of transition metal oxides of the type ReO3L (L = Cl, CH3, OCH3 and Cp) to ethenone have been explored at the MO6 and B3LYP/LACVP* levels of theory. The activation barriers and reaction energies for the stepwise and concerted addition pathways involving multiple spin states have been computed. In the reaction of ReO3L (L = Cl(-), OCH3, CH3 and Cp) with ethenone, the concerted [2 + 2] addition of the metal oxide across the C=C and C=O double bond to form either metalla-2-oxetane-3-one or metalla-2,4-dioxolane is the most kinetically favored over the formation of metalla-2,5-dioxolane-3-one from the direct [3 + 2] addition pathway. The trends in activation and reaction energies for the formation of metalla-2-oxetane-3-one and metalla-2,4-dioxolane are Cp < Cl(-) < OCH3 < CH3 and Cp < OCH3 < CH3 < Cl(-) and for the reaction energies are Cp < OCH3 < Cl(-) < CH3 and Cp < CH3 < OCH3 < Cl CH3. The concerted [3 + 2] addition of the metal oxide across the C=C double of the ethenone to form species metalla-2,5-dioxolane-3-one is thermodynamically the most favored for the ligand L = Cp. The direct [2 + 2] addition pathways leading to the formations of metalla-2-oxetane-3-one and metalla-2,4-dioxolane is thermodynamically the most favored for the ligands L = OCH3 and Cl(-). The difference between the calculated [2 + 2] activation barriers for the addition of the metal oxide LReO3 across the C=C and C=O functionalities of ethenone are small except for the case of L = Cl(-) and OCH3. The rearrangement of the metalla-2-oxetane-3-one-metalla-2,5-dioxolane-3-one even though feasible, are unfavorable due to high activation energies of their rate-determining steps. For the rearrangement of the metalla-2-oxetane-3-one to metalla-2,5-dioxolane-3-one, the trends in activation barriers is found to follow the order OCH3 < Cl(-) < CH3 < Cp. The trends in the activation energies for the most favorable [2 + 2] addition pathways for the LReO3-ethenone system is CH3 > CH3O(-) > Cl(-) > Cp. For the analogous ethylene-LReO3 system, the trends in activation and reaction energies for the most favorable [3 + 2] addition pathway is CH3 > CH3O(-) > Cl(-) > Cp [10]. Even though the most favored pathway in the ethylene-LReO3 system is the [3 + 2] addition pathway and that on the LReO3-ethenone is the [2 + 2] addition pathway, the trends in the activation energies for both pathways are the same, i.e. CH3 > CH3O(-) > Cl(-) > Cp. However, the trends in reaction energies are quite different due to different product stabilities. The formation of the acetic acid precursor through the direct addition pathways was unsuccessful for all the ligands studied. The formation of the acetic acid precursor through the cyclization of the metalla-2-oxetane-3-one is only possible for the ligands L = Cl(-), CH3 whiles for the cyclization of metalla-2-oxetane-4-one to the acetic acid precursor is only possible for the ligand L = CH3. Although there are spin-crossover reaction observed for the ligands L = Cl(-), CH3 and CH3O(-), the reactions occurring on the single surfaces have been found to occur with lower energies than their spin-crossover counterparts.