Cantilever-aided bodily protraction of a mandibular molar with clear aligner: A finite element analysis.

OBJECTIVE: To analyse the biomechanics of molar protraction through clear aligner therapy (CAT) with and without a buccal cantilever. METHODS: Models were composed of mandible, lower dentition, periodontal ligaments, attachments, a buccal cantilever, and clear aligner. Four groups were designed: (1) control (aligner only), (2) aligner+buccal cantilever with buccal class II traction, (3) aligner+buccal cantilever with buccal class II and lingual class II tractions, (4) aligner+buccal cantilever with buccal horizontal traction named buccal class I, buccal class II, and lingual class II tractions. RESULTS: CAT alone caused mesial tipping, lingual tipping, and intrusion of mandibular second molar. Adding the buccal cantilever on the mandibular second molar with 100-g buccal class II traction was effective in preventing the mesial tipping of mandibular second molar, but resulted in a greater lingual tipping tendency. Further addition of lingual class II traction prevented aforementioned lingual tipping and bodily protraction was achieved in sagittal dimension, while buccal tipping was present. Bodily protraction without buccolingual tipping was achieved through clear aligner, buccal class II, lingual class II, and buccal class I tractions, and the stress concentrated on the alveolar bone was reduced. CONCLUSION: CAT produced mesial tipping, lingual tipping, and intrusion of mandibular molar during protraction. The incorporation of the buccal cantilever into the clear aligner improves the biomechanical effect of molar protraction. Bodily molar protraction can be achieved with a judicious combination of buccal class II, lingual class II and buccal class I tractions with clear aligner and buccal cantilever.

Long-term effects of protraction facemask combined with fixed appliance therapy in severe skeletal Class III adolescent: A case report with 5-year follow-up.

INTRODUCTION AND IMPORTANCE: The decision between orthodontic camouflage therapy and orthodontic-orthognathic surgical treatment for developing skeletal Class III malocclusion presents a significant challenge for orthodontists. CASE PRESENTATION: This case report describes the camouflage treatment of a severe skeletal Class III adolescent at the post-pubertal stage. CLINICAL DISCUSSION: Protraction facemask combined with a bonded acrylic splint expander was initially used to correct the developing skeletal Class III malocclusion. Then the patient received fixed appliance therapy. The duration of active treatment was 14 months. Anterior crossbite was corrected, along with stable occlusion and harmonious facial condition. The results remain stable at the 5-year follow-up period. CONCLUSION: Treatment with protraction facemask followed by fixed appliance therapy was possibly effective in a long-term observation, even in skeletal Class III adolescent at the post-pubertal stage.

Evaluating the efficiency of mandibular molar protraction using Herbst appliances versus temporary anchorage devices: a retrospective case-controlled study.

BACKGROUND: Mandibular second premolar agenesis is a common problem in orthodontics and is often treated in conjunction with maxillary counterbalancing extractions. However, in cases without maxillary crowding or dental protrusion, space closure may pose challenges leading to compromised occlusal results or patient profile. Multiple techniques have been described to treat these patients; nevertheless, there is a paucity of data comparing effectiveness of space closure utilizing various anchorage techniques. The goal of this study is to assess the effectiveness of the Herbst device during mandibular molar protraction and compare it to the use of temporary anchorage device (TADs) in patients with mandibular second premolar agenesis. MATERIALS AND METHODS: This retrospective study included 33 patients with mandibular premolar agenesis treated without maxillary extractions. Of these patients, 21 were treated with protraction Herbst devices and 12 with TADs. Changes in molar and incisor positions, skeletal base positions and occlusal plane angulations were assessed on pretreatment (T0) and post-treatment (T1) lateral cephalograms. Scans/photographs at T0 and T1 were used to evaluate canine relationship changes representing anchorage control. Space closure and breakage/failure rates were also compared. Data was analyzed with paired and unpaired t-tests at the significance level of 0.05. RESULTS: Within the Herbst group, changes in mandibular central incisor uprighting and mandibular molar crown angulations were statistically significant. However, no significant differences were noted between the Herbst and TAD groups. Protraction rates as well as overall treatment times were comparable (0.77 mm/month vs. 0.55 mm/month and 3.02 years vs. 2.67 years, respectively). Canine relationships were maintained or improved toward a class I in 82.85% of the Herbst sample, compared to in 66.7% of the TAD sample. Emergency visits occurred in 80.1% of the Herbst group, with cementation failures or appliance breakages as the most common reasons. CONCLUSION: The Herbst device could be a viable modality in cases with missing mandibular premolars where maximum anterior anchorage is desired, or if patients/parents are resistant to TADs. Furthermore, they could be beneficial in skeletal class II patients with mandibular deficiency who also need molar protraction. However, the increased incidence of emergency visits must be considered when treatment is planned.

Clear aligner treatment of an adult open bite with bilateral missing mandibular first molars through molar protraction with Albert cantilever arms.

Premature loss of first permanent molars is a common occurrence in clinical practice, leading to abnormal occlusion and inefficient mastication for patients. This case report presented the orthodontic retreatment of a 32-year-old female patient who suffered from premature loss of mandibular bilateral first molars. The mesial tipping of the mandibular second molars led to an occlusal interference, resulting in a clockwise rotation of the lower jaw and an anterior open bite (AOB). We achieved long-distance molar mesialization using clear aligners with Albert cantilever arms. After 42 months of treatment, the patient's occlusion and facial profile significantly improved. The cantilever combined with the cleat aligner treatment has been clinically effective for the protraction of mandibular posterior teeth, extending the field of application of clear aligners.

Nonsurgical orthodontic treatment using bone-anchored maxillary protraction in a patient with unilateral cleft lip and palate.

Class III malocclusion due to a retrognathic maxilla is common in patients with cleft lip and palate. Skeletally anchored maxillary protraction using screw-anchored mini-plates combined with intraoral elastics has shown promising results in achieving orthopedic changes and maintaining the outcome until the completion of the growth. This case report presents the course of treatment in a patient with unilateral cleft lip and palate and multiple congenitally missing teeth treated with bone-anchored maxillary protraction until the end of growth. Four mini-plates (Bollard plates) were used during comprehensive fixed orthodontic treatment to protract the dentition and close the space where teeth were missing, extrude the canine, and force eruption of the second premolar using extension arms and cantilevers. A 2-year follow-up at age 17 showed stable occlusion and maintenance of soft tissue results. Bone-anchored maxillary protraction treatment in a patient with cleft lip and palate demonstrates proper orthopedic results and could be a viable alternative to orthognathic surgery.

Inertial sensor data of horses from four breeds at walk and trot in hand on a straight line.

Horses have been used and bred for centuries for their movements. However, specific breeds are expected to have different movement capabilities. We have measured 425 horses from four different breeds at walk and trot on a straight line using an inertial measurement unit (IMU) system (EquiMoves®). This article describes how the data was collected, filtered and analysed to provide a useable dataset of 28 movement variables. It provides a full protocol for field measurements and requirements for adequate trials for analysis. Intra-class correlation coefficient estimates are also provided to assess repeatability of the measurements.

Oral Health Assessment in Cleft Lip & Palate Patients During Orthodontic Treatment for Maxillary Protraction: A Periodontal & Microbiological Study.

OBJECTIVE: To assess the oral health status and microbiota of subgingival plaque in patients with surgically repaired cleft lip and palate (CLP) during orthodontic treatment for maxillary protraction with two different orthodontic appliances. DESIGN: Randomized controlled trial. SETTING: Institutional. PARTICIPANTS: A total of 90 patients with surgically repaired Unilateral Cleft Lip and Palate, out of initially enrolled 120 patients, were divided into 3 groups: experimental group I, experimental group II and control group, with 30 subjects each. Patients with a history of oral prophylaxis in last 6 months or antibiotic therapy within 3 months were excluded from the study. INTERVENTIONS: Bone Anchored Maxillary Protraction was done in experimental group I, while facemask with acrylic occlusal splint was used for maxillary protraction in experimental group II and no orthodontic intervention in control group. MEAN OUTCOME MEASURES: Plaque Index (PI), Gingival Index (GI), Gingival Bleeding Index (GBI), Probing Depth (PD), and microbiota of subgingival plaque (P. gingivalis, P. intermedia, Veillonella and Capnocytophaga) were compared at baseline (T0) and after 8 months (T1). RESULTS: The PI, GI, GBI and PD were observed to be significantly higher in experimental group II followed by experimental group I as compared to control group at 8 months interval (P < .001). The microbiota counts increased significantly in experimental group II and experimental group I (P < .001), as compared to control group. CONCLUSION: Maxillary protraction with facemask and bone plates was found to be a better alternative than facemask with occlusal splint, considering the overall oral health of patients with CLP.

Control of anterior anchorage with miniscrews and sliding mechanics in an adolescent with missing second premolars: A clinical report with biomechanical validation.

Congenital missing second premolars in growing patients should be accurately evaluated in order to establish a suitable treatment plan. Concerning the decision of whether to close or maintain spaces in the dental arches, it shall also be based on biomechanical aspects and the aesthetic traits of individual patients. Accordingly, the option of closing tooth spaces requires an adequate application of biomechanical principles aimed at avoiding detrimental effects on dental arches and facial profile. An effective use of titanium miniscrews for immediate loading, associated with efficient sliding mechanics, can represent an elective way to successfully treat such cases. Herein, the objective is to describe the procedure and underscore the advantages of the mentioned approach by presenting a clinical case along with long-term follow-up.

Uprighting and protraction of two unilateral mandibular molars using a cantilever arm through a sophisticated biomechanical system with clear aligner: A case report.

Although clear aligner can be efficient and predictable in some tooth movements, mandibular molar protraction is the least predictable owing to biological and biomechanical limitations. This case report presents a 20-year-old female with poor prognosed left mandibular first molar (#36), deviated dental midline and mild crowding. After extraction of #36, clear aligners and an Albert cantilever were used for treatment. Through carefully designed dual mechanical system, we achieved uprighting and protraction of #37 within 27 months, with crown and root movements of 9.9mm and 12.1mm, respectively. The predictability of the crown and root movement was 107.6% and 84.6%. Coincident dental and facial midline, class I molar and canine relationship and good root parallelism were also achieved. Large-distance mandibular molar protraction can be achieved effectively with a combination of Albert cantilever arm and clear aligner.

The effectiveness of bone anchored maxillary protraction (BAMP) in the management of class III skeletal malocclusion in children aged 11-14 years compared with an untreated control group: A multicentre two-arm parallel randomised controlled trial.

OBJECTIVE: To evaluate the effectiveness of bone anchored maxillary protraction (BAMP) in the management of class III skeletal malocclusion in children aged 11-14 years compared with an untreated control group in terms of perceived need for orthognathic surgery, skeletal and dental change, and psychological impact. DESIGN: A multicentre two-armed parallel randomised controlled trial. SETTING: Six UK hospital orthodontic units. METHODS: A total of 57 patients were randomly allocated into either the BAMP group (BAMPG) (n = 28) or a no treatment control group (CG) (n = 29). OUTCOMES: Data collection occurred at registration (DC1),18 months (DC2) and 3 years (DC3), where skeletal and dental changes were measured from lateral cephalograms and study models. Oral Aesthetic Subjective Impact Score (OASIS) and Oral Quality of Life (OHQOL) questionnaires were used to assess the psychological impact of treatment. RESULTS: The mean age was 12.9 ± 0.7 years and 12.6 ± 0.9 years in the BAMPG and CG, respectively. At DC2, the BAMPG achieved a class III ANB improvement of +0.6° compared with -0.7° in the CG (P = 0.004). The overjet improvement was +1.4 mm for the BAMPG and -0.2 mm for the CG (P = 0.002). There was no evidence of any other group differences for the other skeletal or dental cephalometric outcomes (P > 0.05) or the questionnaire data (OASIS P = 0.10, OHQOL P = 0.75). At DC2, the 18-month follow-up, 22% of the BAMPG achieved a positive overjet. At the 3-year follow-up (DC3), fewer participants in the BAMPG were perceived to need orthognathic surgery (48%) compared with 75% of participants in the CG (P = 0.04), with an odds ratio of 0.31 (95% confidence interval = 0.10-0.95). CONCLUSION: The BAMP technique did not show any social or psychological benefits; however, the skeletal class III improvement in ANB and the overjet change were sufficient to reduce the perceived need for orthognathic surgery by 27% compared with the CG.

Impact of protraction or orthognathic surgery for class III malocclusion on longitudinal quality of life in patients with cleft lip and palate.

OBJECTIVES: This study assessed overall quality of life (QoL) over time in youth with cleft lip and palate (CLP) undergoing maxillary protraction treatment or orthognathic surgery for class III malocclusion to identify any differences in QoL based on treatment group and outcome success. MATERIALS AND METHODS: A prospective longitudinal cohort study was conducted in two pediatric hospitals. The Short Form Health Survey (SF-12) measured physical and mental QoL prior to treatment, at maximal correction, at treatment completion, and at 1-year post treatment. Analyses included one-sample, two-sample, and paired t-tests and analyses of variance and covariance. RESULTS: Participants (N = 91) either completed protraction (n = 53) at age 11-14 or surgery (n = 38) at age 16-21. Participants were mostly Latinx (67%) males (55%) born with unilateral CLP (81%) and there were no demographic differences between the two groups other than age. The total sample's QoL was in the average range and significantly higher than national norms. No significant differences were found in QoL-based outcome success; however, the protraction group showed a gradual physical QoL improvement over time, while the surgery group experienced a temporary drop in physical QoL postoperatively. At treatment completion, higher physical QoL was associated with higher socioeconomic status. At a year post treatment, mental QoL was significantly higher for males. CONCLUSION: Both protraction and surgery appear to be acceptable treatment options in terms of overall QoL for youth with CLP. While treatment success did not impact QoL, there were some differences in physical QoL coinciding with the treatment phase as well as individual factors.

Clavicle fractures do not increase the occurrence of later subacromial pain syndrome. A registry-based case-control study with 15-25 years of follow-up of 131.838 persons from the Danish National Patient Register.

Background: A clavicle fracture often changes the mechanical axes of the shoulder girdle due to displacement and shortening, potentially leading to scapular protraction and decreased subacromial space. If protraction of the scapula is a major risk factor for developing subacromial pain syndrome (SAPS), a previous clavicle fracture could increase the risk of later SAPS. The purpose of this study was to investigate if a previous clavicle fracture correlates with a higher occurrence or earlier diagnosis of SAPS. Methods: In this retrospective case-control study with data from the Danish National Patient Register, all persons aged 18-60 years, with any hospital contact due to a clavicle fracture (DS420) between January 1, 1996, and December 31, 2005, were identified as cases. For each case, five controls, matched on age and sex, were identified. Primary outcome was the first hospital contact with a SAPS diagnosis (DM751-755) registered more than 180 days following the fracture. Follow-up was until November 01, 2021. Results: 21.973 cases and 109.865 controls were included. The incidence of clavicle fractures was 76 fractures per 100.000 persons per year. Twenty-three percent were female. 1.640 (7.46%) cases and 8.072 (7.35%) controls received a SAPS diagnosis within the following 15-25 years, demonstrating no significant difference in the occurrence of SAPS (P = .56). The mean time from fracture to SAPS diagnosis was shorter for cases compared to controls (4040 vs. 4442 days, P < .001), and cases were slightly younger when receiving the diagnosis (51.3 vs. 53.6 years, P < .001). 1614 cases underwent surgical fixation. This subgroup had a statistically significant higher occurrence of later SAPS diagnosis (205 cases, 13%, P < .001). Conclusions: Persons with a previous clavicle fracture did not have an increased occurrence of receiving a SAPS diagnosis compared to matched controls. However, the diagnosis was given 1-2 years earlier for people with a previous fracture. Based on these findings, no strong argument for protraction of the scapula as a major risk factor for the development of SAPS was found.

Effect of Different Mini Implant Assisted Rapid Palatal Expansion (MARPE) Designs on Maxillary Protraction in Skeletal Class III malocclusion: An FEM Study.

Background: Four different designs of mini-implant-assisted rapid palatal expansion (MARPE) and protraction in nasomaxillary complex and mid-palatal sutures in late adolescent skeletal Class III malocclusion were compared using a three-dimensional finite element analysis. Methods: A finite element model of skull and related sutures was constructed using the computed tomography scan of a 16-year-old female patient with skeletal Class III and ANB of -2°. Four appliance designs: Type I: MARPE with palatal force, Type II: MARPE with buccal force, Type III: Hybrid hyrax with palatal force, and Type IV: Hybrid hyrax with buccal force. Protraction vectors were and analyzed using Ansys software (ANSYS 2021 R2). The displacement pattern of the nasomaxillary structures and the stress distribution in the sutures were examined in all four appliance designs. Results: All the appliance designs resulted in a forward movement of the maxilla, while Type I and III, which used palatal protraction force, caused the greatest forward displacement. In Type I, II, and III, along with forward movement, a clockwise rotation of maxilla was observed, while in Type IV, an anticlockwise rotation of maxilla was observed. Type I, II, and III resulted in higher stress distribution around the superior structures, while Type IV resulted in less stress distribution around the superior structures of maxilla. Conclusion: The forward displacement was enhanced when palatal plates were used to protract the maxilla. The effective appliance design for skeletal class III with open bite case was Type I, II, and III and Type IV for deep bite cases.

Evaluating the Injection of Platelet-Rich Plasma on Second Lower Molars Protraction: A Randomized Controlled Clinical Trial.

Background The use of platelet-rich plasma (PRP) in dentistry was entered several decades ago, yet its clinical use in orthodontics still requires further investigation. The aim of this study was to evaluate the possible effects of local injection of PRP on the rate and type of mandibular second molar protraction movement compared with the comparator (no PRP) group. Material and methods Eighteen patients aged between 17 and 25 years were randomly allocated in a split-mouth study design to receive PRP injections on one side immediately before the start of molar protraction (PRP group), while the other side received only saline solution (comparator group). Eligibility criteria included bilaterally extracted mandibular first molars cases and indicated mandibular second molars protraction. The primary outcome of the study consisted of measuring the rate of molar protraction from the beginning of protraction (T0) to the end of the seventh month (TF), using a digital gauge. The secondary outcome included measuring the type of second molar protraction movement between T0 and TF by lateral cephalometric images. Randomization of the intervention side was performed by picking out opaque sealed envelopes. The blinding of the principal investigator was impossible but blinding of the patient was achieved by injection of saline. Analyses were done using paired samples T-test to compare the changes in all variables between T0 and TF. The level of significance was taken at a P-value < 0.05. Results No significant difference was detected between the PRP and comparator groups in the rate of second lower molar protraction during seven months (0.56±0.07 mm per month in the comparator group, whereas, was 0.6±0.11 mm per month in the PRP group). Molar protraction parameters in both groups showed second lower molars moving by controlled tipping closer to bodily movement (Root Movement:Crown Movement≈0.8). Conclusions Platelet-rich plasma (PRP) is ineffective in accelerating the rate of orthodontic tooth movement (OTM) during molar protraction, and it has no effect on the type of tooth movement. In addition, the mechanics that we used (6 mm power arm in combination with miniscrews) are effective in mandibular second molar protraction by controlled tipping closer to bodily movement.

Investigating scapula positioning in individuals with non-specific lower back pain: A preliminary study.

INTRODUCTION: Low back pain (LBP) is an economic and physically disabling burden on individuals and society. With 70% of cases classed as non-specific, there is a need for further research into the causes and consequences associated. The involvement of postural balance in musculoskeletal conditions is gaining increasing interest in research and health practice. However, there is a lack of literature surrounding LBP and posture in distal segments of the body. OBJECTIVE: The current study investigated scapula positioning in those with non-specific LBP. METHODS: Scapula angle of rotation, scapula protraction, and scapula elevation were assessed in nine participants with chronic non-specific LBP and compared with that of nine asymptomatic controls (aged 18-60 years). The degree of pelvic tilt was assessed across both groups as a secondary outcome measure. RESULTS: No difference was identified between the two sample groups for scapula angle of rotation (p = 0.707), protraction (p = 0.755), or elevation (p = 0.691). Anterior pelvic tilt was greater in those with LBP (p = 0.046), supporting previous literature. CONCLUSION: The findings for the scapula position are novel, given that research in this field is limited. It is concluded that there is no change in scapula positioning in those with non-specific LBP, but there is an increased anterior pelvic tilt.

Evaluating stress and displacement in the craniomandibular complex using Twin Block appliances at varied angles: A finite element study.

OBJECTIVES: The objective of this investigation was to assess the stress and displacement pattern of the craniomandibular complex by employing finite element methodology to simulate diverse angulations of inclined planes that are incorporated in the Twin Block appliance. METHODS: A 3D finite element representation was established by use of Cone Beam Computed Tomography (CBCT) scans. This comprehensive structure included craniofacial skeletal components, the articular disc, a posterior disc elastic layer, dental elements, periodontal ligaments, and a Twin Block appliance. This investigation is the first to incorporated inclined planes featuring three distinct angulations (45, 60, and 70°) as the study models. Mechanical impacts were evaluated within the glenoid fossa, tooth, condylar, and articular disc regions. RESULTS: In all simulations, the stress generated by the Twin Block appliance was distributed across teeth and periodontal ligament, facilitating the anterior movement of mandibular teeth and the posterior displacement of maxillary teeth. Within the temporomandibular joint region, compressive forces on the superior and posterior facets of the condyle diminished, coinciding with the stress configuration that fosters condylar and mandibular growth. Stress dispersion homogenized in the condylar anterior facet and articular disc, with considerable tensile stress in the glenoid fossa's posterior aspect conforming to stress distribution that promote fossa reconfiguration. The 70° inclined plane exerts the highest force on the tissues. The condyle's maximum and minimum principal stresses are 0.36 MPa and -0.15 MPa, respectively, while those of the glenoid fossa are 0.54 MPa and -0.23 MPa. CONCLUSION: Three angled appliances serve the purpose of advancing the mandible. A 45° inclined plane relative to the occlusal plane exerts balanced anteroposterior and vertical forces on the mandibular arch. Steeper angles yield greater horizontal forces, which may enhance forward growth and efficient repositioning.

Mandibular molar protraction: A comparison between fixed functional appliances and temporary anchorage devices.

INTRODUCTION: This study aimed to compare the efficiency of temporary anchorage devices (TADs) and fixed functional appliances (FFAs) for mandibular molar protraction. METHODS: Orthodontic records of 1050 consecutively treated patients with molar protraction were screened. Thirty-six records (22 females and 14 males; mean age, 17.4 years) were divided into two groups: TAD (21 subjects with 25 edentulous spaces) and FFA (15 subjects with 24 edentulous spaces). The primary outcome measure was the efficiency of protraction [magnitude and time required for protraction (rate) and anchor loss (AL)]. The secondary outcomes involved measuring the type of tooth movement (TOTM), external apical root resorption (EARR), alveolar bone height change (ABHC), alveolar bone width change (ABWC) and appliance failure. RESULTS: The rate of tooth movement was significantly higher for FFAs (0.83 ± 0.35 mm/month) versus TADs (0.49 ± 0.2 mm/month) (P = .005). Total treatment duration was less for FFAs (34.78 ± 8.1 months) versus TADs (47.72 ± 13.94 months) (P = .002). TOTM was similar for both (P = .909). EARR was 1.42 ± 1.38 mm for TAD and 1.25 ± 0.88 mm for FFA (P = .81). ABHC increased in the FFA group (1.01 ± 3.62 mm) and decreased for the TAD group (0.68 ± 1.66 mm). ABWC increased for both TAD (1.81 ± 1.73 mm) and FFA (1.75 ± 1.35 mm). The failure rate was 50% for FFAs and 33% for TADs. CONCLUSIONS: Both systems provided translation of lower molars with comparable anchorage control. However, FFAs were more efficient than TADs for lower molar protraction.

Measurement proprieties of the CROM instrument for assessing head posture, neck retraction and protraction.

BACKGROUND: The CROM instrument is widely used clinically and in research to measure neck range of motion. However, its measurement proprieties during the assessment of protraction and retraction movements were not examined so far. OBJECTIVE: To analyse the intra- and inter-rater reliability, the concurrent validity of the CROM for measuring head posture, retraction and protraction in healthy subjects. METHODS: Thirty-three asymptomatic subjects were recruited and assigned in a random order to one of two raters. After a 10-min break, they were examined by a second rater (Assessment 1). After a 30-min break, both raters repeated the examination (Assessment 2). The examination consisted of measuring the head posture, maximum head protraction and maximum retraction. Each movement was repeated 3 times and measured simultaneously with the CROM and with a 3D capture system laboratory. RESULTS: The intra-rater reliability of the CROM was excellent for both raters for head posture and all head movements (ICC>0.9, 95% CI: 0.82-0.99, p < 0.01). The inter-rater reliability was excellent for head posture (ICC>0.95, 95% CI: 0.92-0.98, p < 0.01) and good-to-excellent for all movements at both time-points (ICC = 0.73-0.98, 95%CI: 0.45-0.99, p < 0.01). The validity analysis showed moderate-to-strong correlation between instruments for the head posture and head movements [(r) = -0.47 to -0.78), 95% CI: 0.99 to -0.24, p < 0.01]. CONCLUSION: The CROM instrument has good-to-excellent reliability and adequate validity for measuring cervical position and displacement in the sagittal plane.

Protraction of Mandibular Second Molar for Substitution of Adjacent Missing First Molar With a Mini-Implant-Anchored Albert Loop Appliance.

Protraction of mandibular posterior teeth into edentulous regions is challenging in clinical practice. This case demonstrated a minor tooth movement of a mandibular second molar to substitute its adjacent missing first molar in a 15-year-old female. An efficient bodily movement of the mandibular second molar was achieved through a mini-implant-anchored protraction loop appliance. With this carefully designed biomechanical system, over 10-mm molar protraction was accomplished within 14 months without mesial or lingual tipping. The adjacent third molar erupted spontaneously during the protraction process and drafted mesially. Through brackets and segmented archwire after the protraction, the second and third molars were successfully protracted and good buccal interdigitation was achieved. The combination of the Albert protraction loop and mini-implant allows for more efficient protraction of the mandibular molars, avoiding mesial tipping and lingual rotation of the molars.

Treatment of maxillary hypoplasia with bone anchored maxillary protraction (BAMP) - A case report.

Early diagnosis and treatment is known to be beneficial in Class III malocclusions secondary to maxillary hypoplasia. However, success of treatment largely depends on the patient's compliance and thus, appropriate choice of treatment, appliance and the age for interception plays an important role. Bone anchored maxillary protraction is one such approach presented in this case report for a 13 years old boy who reported with the chief complaint of lower front teeth visibility during speech and smiling. On examination his molars were in Angle's Class III relation, anterior crossbite and deep bite with unerupted maxillary canines. Orthodontic treatment was begun for deep bite correction and for creating space for the maxillary canines, followed by surgical intervention for placement of bone anchored miniplates. Protraction was done for 14 months and the total treatment time was 20 months. Improvement in the patient's profile, aesthetics and function was achieved with well aligned arches.