Effectively Sieving Alkali Metal Ions Using Functionalized Graphene Oxide Membranes by Exploiting Water-Repellent Interactions.

Sieving membranes capable of discerning different alkali metal ions are important for many technologies, such as energy, environment, and life science. Recently, two-dimensional (2D) materials have been extensively explored for the creation of sieving membranes with angstrom-scale channels. However, because of the same charge and similar hydrated sizes, mostly laminated membranes typically show low selectivity (<10). Herein, we report a facile and scalable method for functionalizing graphene oxide (GO) laminates by dually grafting cations and water-repellent dimethylsiloxane (DMDMS) molecules to achieve high selectivities of ∼50 and ∼20 toward the transport of Cs+/Li+ and K+/Li+ ion pairs, surpassing many of the state-of-the-art laminated membranes. The enhanced selectivity for alkali metal ions can be credited to a dual impact: (i) strong hydrophobic interactions between the incident cations' hydration shells and the water-repellent DMDMS; (ii) the efficient screening of electrostatic interactions that hamper selectivity.

Lemongrass essential oil and DEET inhibit attractant detection in infected and non-infected Ixodes scapularis ticks.

Blacklegged tick, Ixodes scapularis Say (Arachnida: Ixodidae), is a growing health concern for humans as vectors the causative agent of Lyme disease, Borrelia burgdorferi, and many other pathogens. Given the potential health threat I. scapularis entails, and the need to find effective strategies to prevent tick bites, it is pivotal to understand the chemosensory system of ticks and their host-seeking behaviour when exposed to repellents. In this study, we investigated whether the exposure to synthetic and plant-derived repellents impairs the ability of I. scapularis to detect attractants and host volatiles (butyric acid), and ultimately how these repellents interfere with host-seeking behaviour in both wild and lab-reared ticks. Furthermore, we screened wild ticks used in electrophysiology and Y-tube behavioural assays for presence of pathogens (Borrelia, Anaplasma, and Babesia) to evaluate if the bacterial infection status would affect the detection of butyric acid under the exposure to repellents. We determined that the exposure to DEET, lemongrass essential oil, citral, and geraniol significantly inhibited the ability of both lab-reared and wild adult female I. scapularis to detect and respond to butyric acid. We found that tick infection status does not significantly impact host-seeking behaviour in adult female I. scapularis. The knowledge gained from our study contributes to advance our understanding of host-seeking behaviour in ticks and the impact that the exposure to repellent has on the tick chemosensory system. These findings will be important for elucidating the mechanism of repellence in ticks and for the development of effective tick repellent management tools.

Parthenogenetic Haemaphysalis longicornis acetylcholinesterases are triggered by the repellent effect of cinnamaldehyde, a primary compound found in cinnamon oil.

The control and prevention of ticks and tick-borne diseases rely on chemical insecticides and repellents. Plant-derived compounds potentially represent new and safer repellents. Cinnamaldehyde, a component of cinnamon oil, exhibits antibacterial, anti-inflammatory, acaricidal, and repellent activity against ticks. Here we studied the molecular mechanism of the repellent effect of cinnamaldehyde on Haemaphysalis longicornis. A 2 % cinnamaldehyde treatment resulted in >90 % nymph repellency within 6 h. Nymphs were exposed to cinnamaldehyde for 30 min, and subsequent transcriptome and metabolome analyses revealed the involvement of H. longicornis Acetylcholinesterases (HL-AchEs) in the response process. HL-AchEs was transcribed in all tick developmental stages and tissues. Following cinnamaldehyde treatment, the transcript and specific activity of the enzyme of AchE were significantly altered. Following RNAi, electroantennography (EAG) tests demonstrated a significant decrease in response to various repellents as well as a significant decrease in repellency. Our findings have revealed that HL-AchEs mediates cinnamaldehyde-induced tick repellency, and the results provide insights into the mechanism of plant-derived tick repellents.

Water Repellent Coating in Textile, Paper and Bioplastic Polymers: A Comprehensive Review.

Water-repellent coatings are essential for enhancing the durability and sustainability of textiles, paper, and bioplastic polymers. Despite the growing use of sustainable materials, their inherent hydrophilicity presents significant challenges. This review explores advanced coating technologies to address these issues, focusing on their mechanisms, properties, and applications. By imparting water resistance and repellency, these coatings improve material performance and longevity. The environmental impact and limitations of current coatings are critically assessed, highlighting the need for sustainable solutions. This review identifies key trends and challenges, offering insights into developing water-resistant materials that align with environmental goals while meeting industry demands. Key focus areas include coating mechanisms, techniques, performance evaluation, applications, environmental impact assessment, and the development of sustainable coating solutions. This research contributes to the development of water-resistant materials that meet the demands of modern industries while minimizing environmental impact.

Superhydrophobicity, Photocatalytic Self-Cleaning and Biocidal Activity Combined in a Siloxane-ZnO Composite for the Protection of Limestone.

The erosion phenomena of the natural stone in cultural heritage are induced by various sources. Consequently, the development of multifunctional protective materials that combine two or more useful properties is an effective strategy in addressing the synergistic effects of various erosion mechanisms. A multifunctional coating, consisting of a silane-based precursor and zinc oxide (ZnO) nanoparticles (NPs), is produced and tested for the protection of limestone. The hybrid coating combines the following three properties: superhydrophobicity, including water-repellency, photocatalytic self-cleaning and biocidal activity. The relative concentration of the NPs (0.8% w/w), used for the suggested composite coating, is carefully selected according to wetting studies, colourimetric measurements and durability (tape peeling) tests. The non-wetting state is evidenced on the surface of the composite coating by the large contact angle of water drops (≈153°) and the small contact angle hysteresis (≈5°), which gives rise to a physical self-cleaning scenario (lotus effect). The photocatalytic chemical self-cleaning is shown with the removal of methylene blue, induced by UV-A radiation. Moreover, it is shown that the suggested coating hinders the incubation of E. coli and S. aureus, as the inhibitions are 94.8 and 99.9%, respectively. Finally, preliminary studies reveal the chemical stability of the suggested coating.

High-Throughput Screening System Evaluation of Andrographis paniculata (Burm.f.) Extracts and Their Fractions against Mosquito Vectors.

Infectious diseases that cause illness and/or death in humans can be contracted from mosquito bites. A viable and alternate method of personal protection that can lower the danger of human exposure to mosquito-borne diseases is the use of plant-based repellents. Using a high-throughput screening system, the current work examined the toxicity, contact irritancy, and spatial repellency of Andrographis paniculata crude extract and its fractions against Aedes aegypti, Anopheles minimus, and An. dirus. Five fractions (i.e., F1, F2, F3, F4, and F5) were separated from the crude extract by column and thin layer chromatography and analyzed using high-performance liquid chromatography and mass spectrometry. The major active compounds identified from F3 and F5 were 4-deoxy-11,12-didehydroandrographolide and andrographolide. Three concentrations (1.0, 2.5, and 5.0%) for each of the crude extracts and the five fractions were individually impregnated on nylon netting strips and evaluated against the three mosquito species. Results showed that the highest contact irritancy was elicited by the crude extract at 5% concentration against Ae. aegypti (43.70% escaped). Results of the spatial activity index (SAI) showed that fractions F3 and F5 at 2.5% demonstrated the strongest repellency against Ae. aegypti (SAI = 0.84) and An. minimus (SAI = 0.83), respectively. Both the crude extract and its components did not cause any knockdown or mortality. These findings suggest that fractionation of A. paniculata extracts is valuable in assessing their spatial repellent efficacy against mosquitoes. Fractions F3 and F5 hold promise as natural mosquito repellents and could contribute to developing effective mosquito control strategies.

A Review of Botanical Extracts with Repellent and Insecticidal Activity and Their Suitability for Managing Mosquito-Borne Disease Risk in Mexico.

Among the main arboviruses affecting public health in tropical regions are dengue, zika, and chikungunya, transmitted mainly by mosquitoes of the Aedes genus, especially Aedes aegypti. In recent years, outbreaks have posed major challenges to global health, highlighting the need for integrated and innovative strategies for their control and prevention. Prevention strategies include the elimination of vectors and avoiding mosquito bites; this can be achieved through the use of bioinsecticides and repellents based on plant phytochemicals, as they offer sustainable, ecological, and low-cost alternatives. Mexico has a variety of plants from which both extracts and essential oils have been obtained which have demonstrated significant efficacy in repelling and/or killing insect vectors. This review examines the current knowledge on plant species found in Mexico which are promising options concerning synthetic compounds in terms of their repellent and insecticidal properties against mosquitoes of the genus Aedes and that are friendly to the environment and health.

Invisible enemies: evaluating human health threats of mosquito repellents through animal studies.

Mosquito-borne diseases continue to pose significant threats to human populations, especially in developing and underdeveloped regions, where access to effective preventive measures remains limited. Mosquito repellents represent a cornerstone in the arsenal against these diseases, providing a barrier against mosquito bites. Mosquito repellents come in various formulations, including topical ointments and commercial vaporizers, with varying compositions. Common constituents include deodorized kerosene (DOK) as a solvent, pyrethroids, amides, essential oils for fragrance, and synergists. Despite their widespread use, the toxicological profiles of these repellents remain inadequately understood, raising questions about their safety in prolonged or excessive exposure scenarios. However, while their efficacy in preventing mosquito-borne illnesses is well-established, concerns persist regarding their potential toxicity to humans and the environment. This review critically examines the existing literature on the toxicity of mosquito repellents, focusing on their adverse effects on human health and environmental sustainability. Through an extensive analysis of available research, this review aims to shed light on the potential health risks associated with mosquito repellents, such as dermatological irritation, respiratory complications, and allergic reactions in humans.

Chemical Characterization and Insecticidal Activities of the Essential Oils from the Different Parts of Ocimum gratissimum var. suave (Willd.) Hook. f.

In this research, the essential oils (EOs) from different parts of Ocimum gratissimum var. suave were chemically characterized and evaluated for insecticidal activity, especially against two common storage pests of Chinese herbal medicines: Tribolium castaneum and Liposcelis bostrychophila. Ocimum gratissimum is a plant with several medicinal values in traditional Chinese medicine. In the study, EOs were successfully extracted from inflorescences (OGI) and stem-leaf (OGLS) parts of O. gratissimum by steam distillation and 16 compounds were identified by gas chromatography-mass spectrometry (GC-MS), of which eugenol was the major constituent in both extracts. In fumigation toxicity tests against both pests, the EOs showed limited toxicity against T. castaneum but showed better toxicity against L. bostrychophila. Contact toxicity tests showed that OGLS had better insecticidal potential than OGI, while the insecticidal effect of eugenol sometimes exceeded that of EOs. In addition, repellency experiments showed that O. gratissimum EOs repelled the pests to varying degrees, with the effect being influenced by concentration and exposure time. The results suggest that O. gratissimum EOs could be a promising alternative to synthetic insecticides for sustainable utilization.

Molecular basis of camphor repellency in Hyphantria cunea.

The plant-derived camphor has been used as a natural insect repellent against various insects for >500 years. However, the repellency mechanism behind camphor remains less understood. In this study, we aimed to identify the camphor receptor in Hyphantria cunea by deorphanizing 7 odorant receptors (ORs). The results showed that HcunOR46 is narrowly tuned to Camphor and is only conserved within the family Noctuidae. Further analysis through behavioral and electroantennograms (EAG) assays indicated that H. cunea adults are more sensitive to camphor than larvae, both behaviorally and electrophysiologically. This difference may be due to the lower expression of HcunOR46 at the larval stage. Additionally, a feeding assay indicated that camphor repellency could be related to camphor toxicity to larvae, with the lethal concentration 50 (LC50) value of 69.713 µg/µL. These results suggest that H. cunea may detect camphor through a distinct olfactory pathway from Culicinae mosquitos, providing a novel camphor-based pest management strategy for H. cunea.

How Cells Stay Together: A Mechanism for Maintenance of a Robust Cluster Explored by Local and Non-local Continuum Models.

Formation of organs and specialized tissues in embryonic development requires migration of cells to specific targets. In some instances, such cells migrate as a robust cluster. We here explore a recent local approximation of non-local continuum models by Falcó et al. (SIAM J Appl Math 84:17-42, 2023). We apply their theoretical results by specifying biologically-based cell-cell interactions, showing how such cell communication results in an effective attraction-repulsion Morse potential. We then explore the clustering instability, the existence and size of the cluster, and its stability. For attractant-repellent chemotaxis, we derive an explicit condition on cell and chemical properties that guarantee the existence of robust clusters. We also extend their work by investigating the accuracy of the local approximation relative to the full non-local model.

An experimental study of acoustic bird repellents for reducing bird encroachment in pear orchards.

Bird invasion will reduce the yield of high-value crops, which threatens the healthy development of agricultural economy. Sonic bird repellent has the advantages of large range, no time and geographical restrictions, and low cost, which has attracted people's attention in the field of agriculture. At present, there are few studies on the application of sonic bird repellents in pear orchards to minimize economic losses and prolong the adaptive capacity of birds. In this paper, a sound wave bird repellent system based on computer vision is designed, which combines deep learning target recognition technology to accurately identify birds and drive them away. The neural network model that can recognize birds is first trained and deployed to the server. Live video is captured by an installed webcam, and the sonic bird repellent is powered by an ESP-8266 relay switch. In a pear orchard, two experimental areas were divided into two experimental areas to test the designed sonic bird repellent device, and the number of bad fruits pecked by birds was used as an indicator to evaluate the bird repelling effect. The results showed that the pear pecked fruit rate was 6.03% in the pear orchard area that used the acoustic bird repeller based on computer recognition, 7.29% in the pear orchard area of the control group that used the acoustic bird repeller with continuous operation, and 13.07% in the pear orchard area that did not use any bird repellent device. While acoustic bird repellers based on computer vision can be more effective at repelling birds, they can be used in combination with methods such as fruit bags to reduce the economic damage caused by birds.

Bioassay-guided isolation of insect repellent compounds from Ligusticum porteri root extract.

In our program of screening natural products against the pests of medical and veterinary importance, ethanolic extract of the roots of Ligusticum porteri J.M.Coult. & Rose showed significant repellency against mosquitoes. The extract was then fractionated to test different fractions to identify the active repellent compounds. This testing resulted in the isolation of different compounds including (Z)-3-butylidenephthalide, (E)-3-butylidenephthalide, and a mixture of (E/Z)-3-butylidenephthalide. Biting deterrence of all these compounds was similar to N,N-diethyl-3-methylbenzamide (DEET) against Aedes aegypti (L.) in Klun and Debboun (K & D) bioassay. (E/Z)-3-butylidenephthalide which is a mixture of the two compounds was further tested in Ali & Khan (A & K) bioassay. Based on these data repellency of this compound was similar whereas the MED values of the mixtures of (E/Z)-3-butylidenephthalide with carotol were lower (6.25 + 6.25 = 12.5 µg/cm2) than individual treatments (25 µg/cm2). In in vivo (direct skin application bioassay), (E/Z)-3-butylidenephthalide showed excellent repellency. The residual repellency of (E/Z)-3-butylidenephthalide at 8 and 16 % application rates was 4.5 and 10-h respectively which was equal to or better than DEET with the residual time of 5 and 9-h, respectively. The mixture of (E/Z)-3-butylidenephthalide with carotol (8 + 8 %) increased the residual repellency by 2-h (44 %) as compared to (E/Z)-3-butylidenephthalide alone at a dose of 8 %. These data indicated that (E/Z)-3-butylidenephthalide is an effective mosquito repellent that is stable and has a long shelf life. The activity of this compound is extraordinary and residual time is comparable to DEET. In vivo data demonstrated an enormous potential of (E/Z)-3-butylidenephthalide as a repellent that can be developed for commercial use. However, (E/Z)-3-butylidenephthalate was found in lower amounts of the L. porteri essential oil.

Contact Toxicity and Repellent Effects of Essential Oils from Toddalia asiatica Against Two Stored-Product Insects.

Insect infestations continually endanger stored goods, underscoring the significance of discovering eco-friendly insecticides for pest management. Essential oils (EOs) from different parts of Toddalia asiatica (leaf, fruit and branch) were extracted by hydrodistillation and analyzed by GC-MS. Carvene, p-cymene and muurolene are the principal compounds of T. asiatica leaf (TAL), T. asiatica fruit (TAF) and T. asiatica branch (TAB) EO respectively. Our work aimed to assess the contact toxicity and repellent effects of EOs on two storage pests, Tribolium castaneum and Lasioderma serricorne. All tested EOs exhibited obvious contact toxicity, especially, TAL EO against T. castaneum (33.48 µg/adult) and TAF EO against L. serricorne (16.42 µg/adult). Repellency tests revealed that TAL and TAF EOs, at a concentration of 78.63 nL/cm2, achieved nearing 100 % efficiency against T. castaneum. These results suggest that EOs of T. asiatica could be used as effective botanical insecticides for managing stored-product insects.

In vivo mosquito repellency effect of citronella (Cymbopogon nardus (L.) Rendle) essential oil bath bomb formulation in dogs.

Background and Aim: Mosquitoes carry numerous diseases of medical and veterinary significance. While citronella essential oil is safe as a mosquito repellent, extensive research does not document its ability to deter mosquitoes from animals. This study assessed the citronella essential oil bath bomb's ability to repel Culex quinquefasciatus mosquitoes in dogs. Materials and Methods: Citronella essential oil's chemical composition was analyzed using gas chromatography-mass spectrometry (GC-MS). Through freeze-thaw testing, a bath bomb formulation containing 6% w/w citronella essential oil was assessed for its physical and chemical stability. Thirty-two healthy client-owned mixed-breed dogs were employed to test the mosquito-repellency effects of citronella essential oil (treatment group) and olive oil (control group) bath bomb formulations. Bath bombs were tested for irritation effects on animal skin for 15-day post-application. Results: Thirty-six compounds were identified through GC-MS, with citronellal (23.38%), δ-cadinene (12.25%), and geraniol (9.09%) being the most prevalent constituents. The bath bomb maintained its original physical properties after undergoing six freeze-thawing cycles and retained over 90% of its citronella essential oil. About 100%, 69.28%, and 65.58% mosquito repellency were displayed by the citronella essential oil bath bomb at 3 h, 6 h, and 8 h, respectively. None of the test animals exhibited skin irritation during the study. Conclusion: The citronella bath bomb effectively repelled C. quinquefasciatus in dogs without irritating their skin. The formulation's physical and chemical stability is demonstrated by the results of freeze-thaw stability testing. Further studies should be conducted to evaluate the repelling activity against other mosquito species.

Strategic use of 4 % deltamethrin impregnated-collar in seropositive dogs reduces the incidence of seroreactivity to visceral leishmaniasis in dogs from endemic areas.

The effectiveness of a visceral leishmaniasis (VL) control strategy based on the application of 4 % deltamethrin impregnated collars (DIC) exclusively in seropositive dogs was assessed between 2018 and 2019, through a prospective study. The effectiveness of DIC-collaring was evaluated by comparing the incidence rate of anti-leishmanial antibodies among dogs from two endemic districts in Brazil. In one of the areas, the conventional control measure which is based on the non-compulsory euthanasia of LV seropositive dogs, was practiced by the official healthy service as a regular procedure, whereas strategic collaring, conceived in this study, was carried out in the other. Results of serological tests applied to serum samples collected from all domiciled dogs were evaluated in three consecutive times, spaced by around 200 days. Incidence rates of VL seroreactivity were compared between districts in the same period of time as well as within the same district, in consecutive periods. Based on the results, the risk of infection in the population under conventional control measure was up to four times higher than the risk of infection where DIC-collaring was used. The strategic use of collar proposed here emerged as a promising measure for VL control in dogs from endemic areas. Strategic collaring does not rely on the euthanasia of infected animals, an extremely controversial procedure, and instead of being used in all dogs, as collaring is normally recommended; only seropositive dogs are intervened. Strategic use of DIC has the potential to drastically reduce costs, if compared to mass collaring canine population.

Electrospun Polyvinylidene Fluoride Membranes: Waterproofing and Acoustic Performance for Air and Acoustic Vents in Electronics.

Advancements in electronic devices demand materials capable of exceptional performance in various challenging environments. This study presents polyvinylidene fluoride (PVDF) nonwoven membranes with controlled porosity, created using an air-guided electrospinning method, followed by a calendaring process. These membranes exhibit a combination of water-repellent properties and sound transmission capabilities, making them ideal candidates for use in air and acoustic vents in electronic systems. A key feature of our membrane is the three-dimensional nanostructured pores, ranging from 0.20 to 0.76 µm, with a mean pore size of 0.51 µm, achieved through the formation of randomly arranged long nanofibers. By employing both experimental and theoretical methods, we achieved impressive performance metrics: air permeability of 0.86 cm3/cm2/s, water contact angles up to 139.3°, and breakthrough pressure as low as 0.27 MPa. Our PVDF nonwoven membranes maintain an optimal balance of stiffness, density, and air permeability, leading to exceptionally low sound transmission loss values ranging between -10 and -40 dBV/Pa, all while preserving their structural integrity. These findings contribute to the development of next-generation waterproof and acoustically permeable membranes, offering enhanced performance capabilities in demanding operational scenarios. This work advances the field of nanomaterials, environmental engineering, and acoustic technologies, with the potential to influence the design of future electronic devices.

Advancing spatial repellents for malaria control: effectiveness and cost-effectiveness of a spatial repellent under operational use in Northern Uganda-study protocol for a cluster randomized controlled trial.

BACKGROUND: Spatial repellents (SRs) have been widely used for the prevention of mosquito bites, and preliminary findings suggest efficacy against both malaria (1) and Aedes-borne viruses (2) but their effectiveness in reducing mosquito-borne diseases under operational use has never been evaluated. SRs have the potential of being critical tools in the prevention of mosquito-borne diseases in contexts where typical vector control strategies, such as insecticide-treated nets (ITNs) and indoor residual spraying, are inaccessible or underutilized such as among displaced persons or in emergency relief settings. METHODS: Children will be enrolled in 3 separate cohorts to establish the effectiveness of SRs in reducing malaria infection in different distribution channels. One cohort will estimate the direct effect of the SR distributed through a reference channel (study personnel distribution). The two remaining cohorts will estimate the protection of the SR distributed through a voucher channel and the Village Health Team channel. Cohorts will be followed twice a month (approximately every 15 days): during the first scheduled household visit in the month, a blood sample will be taken for malaria rapid diagnostic test (Monthly Visit #1); and, during the second scheduled household visit, a blood sample will only be taken if the participant has a recent history of fever (Monthly Visit #2). The incidence of malaria in each cohort will be estimated and compared to the reference cohort to determine the benefit of using a SR in an area with high, year-round transmission of malaria. DISCUSSION: This study will address the knowledge gap of whether or not SRs are effective in reducing human malaria disease in humanitarian assistance and emergency response settings in sub-Saharan Africa where underlying transmission rates are historically high and ITNs may or may not be widely deployed. This research will inform policy makers on whether to recommend SRs as a means to further reduce malaria transmission for such operational programs. TRIAL REGISTRATION: ClinicalTrials.gov NCT06122142. Registered on November 8, 2023.

Surface-Templated Polymer Microparticle Synthesis Based on Droplet Microarrays.

Polymer microparticle synthesis based on the surface-templated method is a simple and environmentally friendly method to produce various microparticles. Unique particles with different compositions can be fabricated by simply annealing a polymer on a liquid-repellent surface. However, there are hurdles to producing particles of homogeneous sizes with large quantities and varying the shape of particles. Here, a new approach to synthesizing multiple polymer microparticles using micropatterns with wettability contrast is presented. Polymer microparticles are formed in two steps. First, a layer of poly(sodium-4-styrenesulfonate) is deposited on the hydrophilic regions by dipping and withdrawing this micropattern from a polymer solution, and an array of microdroplets is formed. A dewetting-inducing layer on the pattern is introduced, and then target polymer patches are sequentially generated on it. By annealing over Tg, the contact line of the target polymer patch is freely receded, creating a particle form. The size and shape of the microparticle can be controlled by varying the micropatterns. In addition, it is demonstrated that microparticles made of polymer blends or polymer/nanoparticle composite are easily produced. This versatile method offers the potential of surface-templated synthesis to tailor polymer microparticles with different sizes, shapes, and functionalities in various research and applications.

Designing Plastrons for Underwater Bubble Capture: From Model Microstructures to Stochastic Nanostructures.

Bubbles and foams are often removed via chemical defoamers and/or mechanical agitation. Designing surfaces that promote chemical-free and energy-passive bubble capture is desirable for numerous industrial processes, including mineral flotation, wastewater treatment, and electrolysis. When immersed, super-liquid-repellent surfaces form plastrons, which are textured solid topographies with interconnected gas domains. Plastrons exhibit the remarkable ability of capturing bubbles through coalescence. However, the two-step mechanics of plastron-induced bubble coalescence, namely, rupture (initiation and location) and subsequent absorption (propagation and drainage) are not well understood. Here, the influence of 1) topographical feature size and 2) gas fraction on bubble capture dynamics is investigated. Smaller feature sizes accelerate rupture while larger gas fractions markedly improve absorption. Rupture is initiated solely on solid domains and is more probable near the edges of solid features. Yet, rupture time becomes longer as solid fraction increases. This counterintuitive behavior represents unexpected complexities. Upon rupture, the bubble's moving liquid-solid contact line influences its absorption rate and equilibrium state. These findings show the importance of rationally minimizing surface feature sizes and contact line interactions for rapid bubble rupture and absorption. This work provides key design principles for plastron-induced bubble coalescence, inspiring future development of industrially-relevant surfaces for underwater bubble capture.