Quantitative structure permeability relationships for phenolic compounds applied to human epidermal membranes in various solvents.

PURPOSE: This study examined how solvent-skin-solute interactions influenced the human epidermal permeation of three similar-sized phenolic compounds applied in a series of different solvents. METHODS: Human epidermal permeation fluxes and lag times of three phenolic compounds were assessed in Franz cells for a range of solvents varying in molecular size and solubility parameters. In order to develop a mechanistic understanding of the determinants of the permeation findings, the solubility of the compounds in solvents and stratum corneum, the extent of solvent uptake by the stratum corneum and the impact of the solvents on skin hydration and transepidermal water loss were also measured. RESULTS: Maximum epidermal fluxes and lag times varied greatly with the various solvent used. Markedly enhanced epidermal permeability fluxes, prolonged lag times and reduced diffusivities of the compounds were evident for many of the solvents. A solvent induced increase in stratum corneum solubility was associated with the uptake of solvent containing dissolved compound. This uptake was dependent on both the solvent molecular size and the solubility of the compounds in the solvents. The imbibed solvent acted as a reservoir in the skin, facilitating uptake and an increased thermodynamic activity that enhanced flux but, at the same time, inhibiting diffusion and prolonging lag time. CONCLUSION: The solubility, permeation and lag times of compounds in the stratum corneum can be modulated by solvent uptake. Whilst a solvent -induced stratum corneum reservoir effect for a compound may prolong its lag time for a compound before steady state permeation is reached, it does not affect its overall steady state transport defined by diffusion of its free form.

Predicting the binding affinity of chemicals to estrogen receptor using Hansen solubility parameters.

Receptor-binding tests for the receptors of various substances are widely employed to identify drug candidates and predict the biological effects of chemical substances. Here, the results of chemicals binding to estrogen receptor (ER) reported in a validation study of the Organization for Economic Cooperation and Development TG 455 and the Hansen solubility parameter (HSP) values of the test substances were compared and examined using the Hansen sphere method, thus predicting potential HSPs that correspond to the ER-binding domain of agonists. Based on the results of the validation study and the HSP values of the test chemicals, a Hansen solubility sphere was created, and the ER potential parameter corresponding to the ER was obtained. The binding potential of the test substances to ER was predicted by comparing this potential parameter with the HSP of each test substance. These results indicate that ER binding properties can be predicted with high accuracy using the concept of HSP.

Multivariate Analysis of Solubility Parameters for Drug-Polymer Miscibility Assessment in Preparing Raloxifene Hydrochloride Amorphous Solid Dispersions.

The success of obtaining solid dispersions for solubility improvement invariably depends on the miscibility of the drug and polymeric carriers. This study aimed to categorize and select polymeric carriers via the classical group contribution method using the multivariate analysis of the calculated solubility parameter of RX-HCl. The total, partial, and derivate parameters for RX-HCl were calculated. The data were compared with the results of excipients (N = 36), and a hierarchical clustering analysis was further performed. Solid dispersions of selected polymers in different drug loads were produced using solvent casting and characterized via X-ray diffraction, infrared spectroscopy and scanning electron microscopy. RX-HCl presented a Hansen solubility parameter (HSP) of 23.52 MPa1/2. The exploratory analysis of HSP and relative energy difference (RED) elicited a classification for miscible (n = 11), partially miscible (n = 15), and immiscible (n = 10) combinations. The experimental validation followed by a principal component regression exhibited a significant correlation between the crystallinity reduction and calculated parameters, whereas the spectroscopic evaluation highlighted the hydrogen-bonding contribution towards amorphization. The systematic approach presented a high discrimination ability, contributing to optimal excipient selection for the obtention of solid solutions of RX-HCl.

The temperature dependence of the Hildebrand solubility parameters of selected hydrocarbon polymers and hydrocarbon solvents: a molecular dynamics investigation.

CONTEXT: To determine the miscibility of liquids at high temperatures using the concept of Hildebrand solubility parameter δ , the current practice is to examine the difference in δ between two liquids at room temperature, assuming that δ is not sensitive to temperature. However, such an assumption may not be valid for certain polymer blends and solutions. Therefore, a knowledge of the δ values of the liquids of interest at high temperatures is desirable. The determination of δ at high temperatures, especially for high-molecular-weight polymers, is impossible, as polymers have vapor pressures of zero. To this end, molecular dynamics (MD) simulations provide a practical means for determining δ over a wide range of temperatures. In this work, we study the temperature dependence of δ of five hydrocarbon polymers: polyethylene (PE), isotactic and atactic polypropylene (i-PP and a-PP), polyisobutylene (PIB), and polyisoprene (PI) in five hydrocarbon solvents: n-pentane, n-hexane, n-dodecane, isobutene, and cyclohexane. The polymers are modeled as monodisperse chains with 100 repeat units. The average δ values of PE, i-PP, a-PP, PIB, and PI at 300 K are determined as 18.6, 14.9, 14.6, 14.3, and 16.4 MPa1/2, respectively, in a good agreement with experimental data. The δ values of these polymers at various temperatures are also determined. The temperature dependence of δ is fitted to two linear equations, one above and the other below the polymer's glass transition temperature Tg. The δ values are more sensitive to temperature at T ≥ Tg. The Tg values of the polymers, determined based upon their specific volumes and δ values agree with the experiment qualitatively. The determination of the temperature dependence of δ has a great potential for industrial applications, such as determining miscibility, developing polymeric organogelators as flocculants and oil spill treating agents, and identifying potential solvents and ideal processing temperatures. METHODS: The MD simulations are performed using the GROMACS 2022.3 package with optimized potential for liquid simulations-all atom (OPLS-AA) force field parameters. All polymers are built as extended chains using CHARMM-GUI Polymer Builder.

Chromatographic Assessment of Organic Compounds Using Carbon Nanotubes: The Relationship between Affinity and Dispersibility.

The affinity between carbon nanotubes (CNTs) and organic compounds is of substantial importance since it strongly relates to the dispersibility of CNTs in those compounds. Several affinity evaluation methods have been developed so far, and the concept of the Hansen solubility parameter is a representative method widely used in the field of nanocarbon materials. Here, we demonstrate that CNT-loaded silica columns can effectively assess the affinity of organic compounds for CNT surface by exploiting the chromatographic retention time as a criterion. Obtained trends of the affinity of organic compounds for CNT were compared to those based on Hansen solubility parameter distance values. Most organic compounds showed similar trends, but one exceptional compound was observed. Simple CNT dispersion tests were conducted with these organic compounds to demonstrate the advantage of the chromatographic assessment. Further, we conducted comparison experiments using a pyrene-functionalized column and other CNT-loaded columns to elucidate the characteristics of each CNT column. The chromatographic approaches using CNT columns would be beneficial for realizing CNT suspensions with improved CNT dispersibility.

Control of Pore Sizes in Epoxy Monoliths and Applications as Sheet-Type Adhesives in Combination with Conventional Epoxy and Acrylic Adhesives.

Materials with monolithic structures, such as epoxy monoliths, are used for a variety of applications, such as for column fillers in gas chromatography and HPLC, for separators in lithium-ion batteries, and for precursor polymers for monolith adhesion. In this study, we investigated the fabrication of epoxy monoliths using 1,3-bis(N,N-diglycidylaminomethyl)cyclohexane (TETRAD-C) as the tetrafunctional epoxy and 4,4'-methylenebis(cyclohexylamine) (BACM) as the amine curing agent to control pore diameters using polyethylene glycols (PEGs) of differing molecular weights as the porogenic agents. We fabricated an epoxy monolith with micron-order pores and high strength levels, and which is suitable for the precursors of composite materials in cases where smaller PEGs are used. We discussed the effects of the porous structures of monoliths on their physical properties, such as tensile strength, elongation, elastic modulus, and glass transition temperatures. For example, epoxy monoliths prepared in the presence of PEGs exhibited an elastic modulus less than 1 GPa at room temperature and Tg values of 175-187 °C, while the epoxy bulk thermoset produced without any porogenic solvent showed a high elastic modulus as 1.8 GPa, which was maintained at high temperatures, and a high Tg of 223 °C. In addition, the unique adhesion characteristics of epoxy monolith sheets are revealed as a result of the combinations made with commercial epoxy and acrylic adhesives. Epoxy monoliths that are combined with conventional adhesives can function as sheet-type adhesives purposed with avoiding problems when only liquid-type adhesives are used.

Improving the Monophenolic Yield of Lignin Depolymerization in Dualistic Aprotic Solvent System by Organic Solvent Fractionation.

Converting lignin into aromatic chemicals is a promising strategy for the high-value utilization of lignocellulosic feedstock. However, the inherent heterogeneity of lignin poses a significant obstacle to achieving efficient conversion and optimal product yields within bio-refinery systems. Herein, we employed a one-step fractionation method to enhance lignin homogeneity and utilized the THF/DMSO-EtONa (tetrahydrofuran/dimethyl sulfoxide-sodium ethoxide) system to depolymerize the fractionated lignin. Three protic and three aprotic solvents were used for fractionation. The impact of the solvent properties on the structure and the depolymerization efficiency of the fractionated lignin was investigated. Methanol-fractionated lignin generated the benzoic acid compounds with a yield of 30 wt%, 50 % higher than that of the unfractionated lignin. The polarities (δP), hydrogen bonding abilities (δH), and viscosities (η) of selected protic solvents showed strong linear correlation with molecular weight (Mw), polymer dispersity index (PDI), and syringyl/guaiacyl ratio (S/G ratio) of the fractionated lignin, as well as the total yield of benzoic acid compounds derived from the ß-O-4 bond cleavage. This study elucidates the relationship between solvent properties and lignin structure and proposes a promising approach for refining lignin to enhance utilization efficiency, thereby presenting a potential strategy for value-added application of complex lignin polymers.

Giant Response and Selectivity of Hansen Solubility Parameters-Based Graphene-SBS Co-Polymer Matrix Composite Room Temperature Sensor to Organic Vapours.

A styrene-butadiene-styrene co-polymer matrix nanocomposite filled with graphene nanoplatelets was studied to prepare chemiresistive volatile organic compounds (VOCs) room temperature sensors with considerable response and selectivity. Nanofiller concentration was estimated from the electrical conductivity percolation behaviour of the nanocomposite. Fabricated sensors provided selective relative responses to representative VOCs differing by orders of magnitude. Maximum observed average relative responses upon exposure to saturated vapours of the tested VOCs were ca. 23% for ethanol, 1600% for acetone, and the giant values were 9 × 106% for n-heptane and 10 × 106% for toluene. The insensitivity of the sensor to the direct saturated water vapour exposure was verified. Although high humidity decreases the sensor's response, it paradoxically enhances the resolution between hydrocarbons and polar organics. The non-trivial sensing mechanism is explained using the Hansen solubility parameters (HSP), enabling a rational design of new sensors; thus, the HSP-based class of sensors is outlined.

Frost-resistant nanocellulose-based organohydrogel with high mechanical strength and transparency.

Improving mechanical strength and frost-resistance is an important research direction in the field of hydrogel materials. Herein, using bacterial nanocellulose (BC) as a reinforcing agent and polyvinyl alcohol (PVA) as a polymer matrix, a frost-resistant organohydrogel was constructed via the freezing-thawing method in a new binary solvent system of N, N-dimethylformamide and water (DMF-H2O), which was designed according to the Hansen Solubility Parameter. Owing to the solvent-induced crystallization effect that led to the enhanced 3D hydrogen bonding network during the freezing-thawing process, the optimal organohydrogel achieved excellent mechanical properties with the tensile strength of 2,974 kPa and the stretchability of 277 % at room temperature, respectively. In the visiblelight range, the organohydrogel demonstrated high transmittance. Moreover, the presence of a DMF-H2O binary solvent endows it with frost-resistance, retaining the tensile strength of 508 kPa and a stretchability of 190 % even at -70 °C, respectively. This kind of transparent, frost-resistant organohydrogel has potential uses in harsh settings due to its great mechanical strength.

Unfolding the Correlation between Solution Aggregation and Solid-State Crystal Orientation in Donor-Acceptor Copolymers via Solvent Additive Processing.

Tailoring the crystal orientation of donor-acceptor (D-A) copolymers is vital for boosting the performance of optoelectronic devices. Despite recent advances in controlling the crystal orientation of D-A copolymers in films, the investigation into their aggregates in solution and the correlation between the solution aggregates and solid-state crystal orientation has been limited. Herein, an effective solvent additive strategy is reported for tuning solution aggregates and the consequent solid-state structures of poly{[N,N'-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene)} (P(NDI2OD-T2)). Specifically, the addition of 1-decanethiol (10-thiol) to the P(NDI2OD-T2) chloroform solution promoted the aggregation of P(NDI2OD-T2) chains because of the improved planarization of the backbones, which changed their crystal orientation in the film from coexisting edge-on and face-on to dominant edge-on when produced by drop-casting. The mechanism of this crystal orientation transformation is elucidated based on the interaction between 10-thiol and the side chains of P(NDI2OD-T2). The optical properties of P(NDI2OD-T2) films with different crystalline structures are closely correlated. Notably, the 10-thiol-enabled facile tailoring of the crystal orientation in P(NDI2OD-T2) can be readily applied to other D-A copolymers of interest. The findings of this study highlight a robust solvent additive strategy for regulating solution aggregates and crystal orientation in D-A copolymer films, which have applications in many optoelectronic devices.

Effect of Dispersing Solvents for an Ionomer on the Performance of Copper Catalyst Layers for CO2 Electrolysis to Multicarbon Products.

To explore the effects of solvent-ionomer interactions in catalyst inks on the structure and performance of Cu catalyst layers (CLs) for CO2 electrolysis, we used a "like for like" rationale to select acetone and methanol as dispersion solvents with a distinct affinity for the ionomer backbone or sulfonated ionic heads, respectively, of the perfluorinated sulfonic acid (PFSA) ionomer Aquivion. First, we characterized the morphology and wettability of Aquivion films drop-cast from acetone- and methanol-based inks on flat Cu foils and glassy carbons. On a flat surface, the ionomer films cast from the Aquivion and acetone mixture were more continuous and hydrophobic than films cast from methanol-based inks. Our study's second stage compared the performance of Cu nanoparticle CLs prepared with acetone and methanol on gas diffusion electrodes (GDEs) in a flow cell electrolyzer. The effects of the ionomer-solvent interaction led to a more uniform and flooding-tolerant GDE when acetone was the dispersion solvent (acetone-CL) than when we used methanol (methanol-CL). As a result, acetone-CL yielded a higher selectivity for CO2 electrolysis to C2+ products at high current density, up to 25% greater than methanol-CL at 500 mA cm-2. Ethylene was the primary product for both CLs, with a Faradaic efficiency for ethylene of 47.4 ± 4.0% on the acetone-CL and that of 37.6 ± 5.5% on the methanol-CL at a current density of 300 mA cm-2. We attribute the enhanced C2+ selectivity of the acetone-CL to this electrode's better resistance to electrolyte flooding, with zero seepage observed at tested current densities. Our findings reveal the critical role of solvent-ionomer interaction in determining the film structure and hydrophobicity, providing new insights into the CL design for enhanced multicarbon production in high current densities in CO2 electrolysis processes.

Experimental and theoretical estimation of the Hansen solubility parameters of paramylon esters based on the degrees of substitution and chain lengths of their acyl groups.

Paramylon is a natural hydrophilic polysaccharide produced in the pyrenoids of euglenoids, and esterification may render paramylon hydrophobic. Esterification imparts not only thermoplasticity, but also potential compatibilities with other polymer resins and fillers. However, the dependence of the compatibility on the structure of the polymer ester has not yet been systematically studied. To estimate the affinities between paramylon esters and hydrophobic organic solvents/resins, the dependences of their Hansen solubility parameters, which are association indices, on the degrees of substitution and chain lengths of the ester groups were investigated. Experimental and theoretical investigations were conducted using the dissolution and Fedors methods, respectively. Esterification decreased the solubility parameter from 49 (paramylon) to approximately 18 MPa1/2 (paramylon esters), indicating that the potential affinities of paramylon esters for hydrophobic organic solvents/polymers increased. A multiple regression analysis was also performed to investigate the effects of acyl chain length and degree of substitution with acyl groups on the solubility parameter. The solubility parameters of the paramylon derivatives were continuously variable from hydrophilic to -phobic. Hence, esterification with various acyl groups may control the hydrophobicities of paramylon esters, enhancing their miscibilities with various hydrophobic organic solvents and resins.

The effect of chemical bond and solvent solubility parameter on stability and absorption value of functionalized PU sponge.

Seawater pollution from various sources such as industrial effluents, ship washing at sea, and oil spills harm humans and the marine environment. Therefore, finding ways to eliminate this pollution is crucial. This study successfully modified a polyurethane sponge through a simple dip-coating method with functionalized graphene oxide incorporating octadecylamine and oleic acid, resulting in a hydrophobic sponge capable of absorbing crude oil and various organic solvents. Characterization analyses confirmed the synthesis. The absorption capacity of the modified sponges was examined, for example, the PU sponge has absorbed 4 g/g engine oil, while the modified GO-ODA-PU sponge has increased its absorption to 36 g/g. The GO-ODA-PU sponge demonstrated great reusability compared to the GO-OA-PU sponge owing to the strong covalent bond formed between GO and ODA, which is superior to the weak hydrogen bond formed between GO and OA. The absorption capacity of the GO-OA-PU sponge decreased by 30%. The contact angle test showed that GO-ODA-PU and GO-OA-PU sponges had contact angles of 131° and 115°, respectively. Additionally, the GO-ODA-PU sponge performed optimally for semi-polar solvents in the solubility parameter range of 18-19, with its absorption capacity reaching its maximum value. The amount of oil recycling is even possible up to 98%.

Selection of appropriate dapsone and poly(1-vinylpyrrolidone-co-vinyl acetate) ratios for the preparation of amorphous solid dispersions.

Drug-polymer miscibility is a critical requirement for the efficient design and development of amorphous solid dispersions. The objective of the current study was to determine the miscibility between dapsone (DAP) and poly(1-vinylpyrrolidone-co-vinyl acetate) (PVP-VA) through theoretical and experimental approaches, including the use of a thermodynamic phase diagram and Gibbs free energy of mixing. In the theoretical study, the difference in the solubility parameter between the DAP and PVP-VA was 2.74, the interaction parameter was 0.50, and the distance between the drug and polymer in the Bagley plot was 2.60. Hence, all these theoretical parameters favour the miscibility between DAP and PVP-VA. Melting point depression study (through thermal analysis) and Flory-Huggins theory were utilized for the practical determination of drug-polymer miscibility, where the interaction parameter was positive, suggesting limited miscibility. The obtained thermodynamic phase diagram and Gibbs free energy of mixing plot can provide an indication for the selection of appropriate drug-polymer ratios in stable and metastable zones and the optimum processing temperature required for the preparation of amorphous solid dispersions.

Effervescence-induced amorphous solid dispersions with improved drug solubility and dissolution.

The current study aimed to investigate drug carrier miscibility in pharmaceutical solid dispersions (SD) and include the effervescent system, i.e. Effervescence-induced amorphous solid dispersions (ESD), to enhance the solubility of a poorly water-soluble Glibenclamide (GLB). Kollidon VA 64, PEG-3350, and Gelucire-50/13 were selected as the water-soluble carriers. The miscibility of the drug-carrier was predicted by molecular dynamics simulation, Hansen solubility parameters, Flory-Huggins theory, and Gibb's free energy. Solid dispersions were prepared by microwave, solvent evaporation, lyophilization, and Hot Melt Extrusion (HME) methods. The prepared solid dispersions were subjected to solubility, in-vitro dissolution, and other characterization studies. The in-silico and theoretical approach suggested that the selected polymers exhibited better miscibility with GLB. Solid-state characterizations like FTIR and 1H NMR proved the formation of intermolecular hydrogen bonding between the drug and carriers, which was comparatively higher in ESDs than SDs. DSC, PXRD, and microscopic examination of GLB and SDs confirmed the amorphization of GLB, which was higher in ESDs than SDs. Gibb's free energy concept suggested that the prepared solid dispersions will be stable at room temperature. Ex-vivo intestinal absorption study on optimized ESDs prepared with Kollidon VA64 using the HME technique exhibited a higher flux and permeability coefficient than the pure drug suggesting a better drug delivery. The drug-carrier miscibility was successfully studied in SDs of GLB. The addition of the effervescent agent further enhanced the solubility and dissolution of GLB. Additionally, this might exhibit a better bioavailability, confirmed by ex-vivo intestinal absorption study.

Preformulation screening of lipids using solubility parameter concept in conjunction with experimental research to develop ceftriaxone loaded nanostructured lipid carriers

Abstract Development of ceftriaxone loaded nanostructured lipid carriers to increase permeability of ceftriaxone across uninflamed meninges after parenteral administration. Lipids were selected by theoretical and experimental techniques and optimization of NLCs done by response surface methodology using Box-Behnken design. The Δδt for glyceryl monostearate and Capryol90 were 4.39 and 2.92 respectively. The drug had maximum solubility of 0.175% (w/w) in glycerol monostearate and 2.56g of Capryol90 dissolved 10mg of drug. The binary mixture consisted of glyceryl monostearate and Capryol90 in a ratio of 70:30. The optimized NLCs particle size was 130.54nm, polydispersity index 0.28, % entrapment efficiency 44.32%, zeta potential -29.05mV, and % drug loading 8.10%. In vitro permeability of ceftriaxone loaded NLCs was 5.06x10-6 cm/s; evidently, the NLCs pervaded through uninflamed meninges, which, was further confirmed from in vivo biodistribution studies. The ratio of drug concentration between brain and plasma for ceftriaxone loaded NLCs was 0.29 and that for ceftriaxone solution was 0.02. With 44.32% entrapment of the drug in NLCs the biodistribution of ceftriaxone was enhanced 7.9 times compared with that of ceftriaxone solution. DSC and XRD studies revealed formation of imperfect crystalline NLCs. NLCs improved permeability of ceftriaxone through uninflamed meninges resulting in better management of CNS infections.

Solubilization and Thermodynamic Analysis of Isotretinoin in Eleven Different Green Solvents at Different Temperatures.

The solubilization and thermodynamic analysis of isotretinoin (ITN) in eleven distinct green solvents, such as water, methyl alcohol (MeOH), ethyl alcohol (EtOH), 1-butyl alcohol (1-BuOH), 2-butyl alcohol (2-BuOH), ethane-1,2-diol (EG), propane-1,2-diol (PG), polyethylene glycol-400 (PEG-400), ethyl acetate (EA), Transcutol-HP (THP), and dimethyl sulfoxide (DMSO) was studied at several temperatures and a fixed atmospheric pressure. The equilibrium approach was used to measure the solubility of ITN, and the Apelblat, van't Hoff, and Buchowski−Ksiazczak λh models were used to correlate the results. The overall uncertainties were less than 5.0% for all the models examined. The highest ITN mole fraction solubility was achieved as 1.01 × 10−1 in DMSO at 318.2 K; however, the least was achieved as 3.16 × 10−7 in water at 298.2 K. ITN solubility was found to be enhanced with an increase in temperature and the order in which it was soluble in several green solvents at 318.2 K was as follows: DMSO (1.01 × 10−1) > EA (1.73 × 10−2) > PEG-400 (1.66 × 10−2) > THP (1.59 × 10−2) > 2-BuOH (6.32 × 10−3) > 1-BuOH (5.88 × 10−3) > PG (4.83 × 10−3) > EtOH (3.51 × 10−3) > EG (3.49 × 10−3) > MeOH (2.10 × 10−3) > water (1.38 × 10−6). ITN−DMSO showed the strongest solute−solvent interactions when compared to the other ITN and green solvent combinations. According to thermodynamic studies, ITN dissolution was endothermic and entropy-driven in all of the green solvents tested. The obtained outcomes suggested that DMSO appears to be the best green solvent for ITN solubilization.

Adsorption Properties of Essential Oils on Polylactic Acid Microparticles of Different Sizes.

The interaction between the polymer and the materials in contact with it affects its applicability. This can be particularly important in applications such as packaging or controlled drug delivery systems. Because of these interactions, the adsorption and diffusion properties of polylactic acid (PLA) are important. The absorption capacity of different polylactic acid particles for different additives like essential oils (Thymus vulgaris, Melissa officinalis, and Foeniculum vulgare essential oils) was investigated depending on the concentration of the essential oil. The PLA microparticles were prepared by the solvent evaporation emulsification method. The prepared particles had a degree of crystallinity of 0.1% and 16.1%, respectively, according to the granules used. This affects the particles' adsorption properties. The specific essential oil uptake of the more crystalline microparticles was on average 15% higher than that of the amorphous particles. The specific amount of essential oil adsorbed decreases with the decreasing concentration of essential oil in the solutions. We also investigated whether the amount of essential oil taken up was correlated with the solubility parameter of the essential oils. We concluded that the difference between the adsorption of the essential oils on the polymer was related to the essential oils' Hansen solubility parameter.

Solubility and Thermodynamic Data of Febuxostat in Various Mono Solvents at Different Temperatures.

This study examines the solubility and thermodynamics of febuxostat (FBX) in a variety of mono solvents, including "water, methanol (MeOH), ethanol (EtOH), isopropanol (IPA), 1-butanol (1-BuOH), 2-butanol (2-BuOH), ethylene glycol (EG), propylene glycol (PG), polyethylene glycol-400 (PEG-400), ethyl acetate (EA), Transcutol-HP (THP), and dimethyl sulfoxide (DMSO)" at 298.2−318.2 K and 101.1 kPa. The solubility of FBX was determined using a shake flask method and correlated with "van't Hoff, Buchowski-Ksiazczak λh, and Apelblat models". The overall error values for van't Hoff, Buchowski-Ksiazczak λh, and Apelblat models was recorded to be 1.60, 2.86, and 1.14%, respectively. The maximum mole fraction solubility of FBX was 3.06 × 10−2 in PEG-400 at 318.2 K, however the least one was 1.97 × 10−7 in water at 298.2 K. The FBX solubility increased with temperature and the order followed in different mono solvents was PEG-400 (3.06 × 10−2) > THP (1.70 × 10−2) > 2-BuOH (1.38 × 10−2) > 1-BuOH (1.37 × 10−2) > IPA (1.10 × 10−2) > EtOH (8.37 × 10−3) > EA (8.31 × 10−3) > DMSO (7.35 × 10−3) > MeOH (3.26 × 10−3) > PG (1.88 × 10−3) > EG (1.31 × 10−3) > water (1.14 × 10−6) at 318.2 K. Compared to the other combinations of FBX and mono solvents, FBX-PEG-400 had the strongest solute-solvent interactions. The apparent thermodynamic analysis revealed that FBX dissolution was "endothermic and entropy-driven" in all mono solvents investigated. Based on these findings, PEG-400 appears to be the optimal co-solvent for FBX solubility.

Molecular Simulation to Explore the Dissolution Behavior of Sulfur in Carbon Disulfide.

Soluble sulfur (S8) and insoluble sulfur (IS) have different application fields, and molecular dynamics simulation can reveal their differences in solubility in solvents. It is found that in the simulated carbon disulfide (CS2) solvent, soluble sulfur in the form of clusters mainly promotes the dissolution of clusters through van der Waals interaction between solvent molecules (CS2) and S8, and the solubility gradually increases with the increase in temperature. However, the strong interaction between polymer chains of insoluble sulfur in the form of polymer hinders the diffusion of IS into CS2 solvent, which is not conducive to high-temperature dissolution. The simulated solubility parameter shows that the solubility parameter of soluble sulfur is closer to that of the solvent, which is consistent with the above explanation that soluble sulfur is easy to dissolve.