What Are E-Cigarettes?

This JAMA Patient Page describes e-cigarettes and the potential health effects of vaping.

Aerosol Inhalation of Gene Delivery Therapy for Pulmonary Diseases.

Gene delivery therapy has emerged as a popular approach for the treatment of various diseases. However, it still poses the challenges of accumulation in target sites and reducing off-target effects. Aerosol gene delivery for the treatment of pulmonary diseases has the advantages of high lung accumulation, specific targeting and fewer systemic side effects. However, the key challenge is selecting the appropriate formulation for aerosol gene delivery that can overcome physiological barriers. There are numerous existing gene carriers under study, including viral vectors and non-viral vectors. With the development of biomaterials, more biocompatible substances have applied gene delivery via inhalation. Furthermore, many types of genes can be delivered through aerosol inhalation, such as DNA, mRNA, siRNA and CRISPR/Cas9. Aerosol delivery of different types of genes has proven to be efficient in the treatment of many diseases such as SARS-CoV-2, cystic fibrosis and lung cancer. In this paper, we provide a comprehensive review of the ongoing research on aerosol gene delivery therapy, including the basic respiratory system, different types of gene carriers, different types of carried genes and clinical applications.

Aerosol Delivery Efficiency With High-Flow Nasal Cannula Therapy in Neonatal, Pediatric, and Adult Nasal Upper-Airway and Lung Models.

BACKGROUND: High-flow nasal cannula (HFNC) systems employ different methods to provide aerosol to patients. This study compared delivery efficiency, particle size, and regional deposition of aerosolized bronchodilators during HFNC in neonatal, pediatric, and adult upper-airway and lung models between a proximal aerosol adapter and distal aerosol circuit chamber. METHODS: A filter was connected to the upper airway to a spontaneously breathing lung model. Albuterol was nebulized using the aerosol adapter and circuit at different clinical flow settings. The aerosol mass deposited in the upper airway and lung was quantified. Particle size was measured with a laser diffractometer. Regional deposition was assessed with a gamma camera at each nebulizer location and patient model with minimum flow settings. RESULTS: Inhaled lung doses ranged from 0.2-0.8% for neonates, 0.2-2.2% for the small child, and 0.5-5.2% for the adult models. Neonatal inhaled lung doses were not different between the aerosol circuit and adapter, but the aerosol circuit showed marginally greater lung doses in the pediatric and adult patient models. Impacted aerosols and condensation in the non-heated HFNC and aerosol delivery components contributed to the dispersion of coarse liquid droplets, high deposition (11-44%), and occlusion of the supine neonatal upper airway. In contrast, the upright pediatric and adult upper-airway models had minimal deposition (0.3-7.0%) and high fugitive losses (∼24%) from liquid droplets leaking out of the nose. The high impactive losses in the aerosol adapter (56%) were better contained than in the aerosol circuit, resulting in less cannula sputter (5% vs 22%), fewer fugitive losses (18% vs 24%), and smaller inhaled aerosols (5 µm vs 13 µm). CONCLUSIONS: The inhaled lung dose was low (1-5%) during HFNC. Approaches that streamline aerosol delivery are needed to provide safe and effective therapy to patients receiving aerosolized medications with this HFNC system.

In Vitro Comparison of Aerosol Delivery in High-Frequency Assisted Airway Clearance Devices With Integrated Nebulizers.

BACKGROUND: High-frequency assisted airway clearance systems combine positive expiratory pressure or oscillatory positive airway pressure with integrated nebulizers to improve the delivery of aerosols and assist with airway clearance. This aerosol study evaluated lung delivery efficiency during positive expiratory pressure and oscillatory positive airway pressure therapy of 2 high-frequency assisted airway clearance/nebulizer systems. METHODS: Aerosol delivery was evaluated during positive expiratory pressure therapy of 10 cm H2O and oscillatory positive airway pressure therapy of 20 cm H2O with the BiWaze Clear and the Volara high-frequency assisted airway clearance/nebulizer systems. The handset and nebulizer were attached to an anatomic upper-airway model via a mouthpiece and placed into a plethysmograph. A tracheal filter was placed to capture the inhaled aerosol. A vacuum filter entrained fugitive aerosols from the plethysmograph. After nebulization of technetium in 3.0 mL normal saline solution, the components were scanned by using scintigraphy and the decay-corrected radiation counts were referenced to the initial nebulizer technetium charges. RESULTS: Aerosol delivery during positive expiratory pressure therapy of 10 cm H2O resulted in higher lung deposition with the BiWaze Clear versus the Volara (28 vs 6.2%; P < .001; 95% CI 16.5-27.7), and higher fugitive losses (23.7 vs 2.8%; P = .004) and nebulizer losses (55 vs 3.3%; P < .001) with the Volara than with the BiWaze Clear. Aerosol delivery during oscillatory positive airway pressure of 20 cm H2O resulted in a higher lung deposition with the BiWaze Clear versus the Volara (16.3 vs 7.3%; P = .005; 95% CI 3.3-15) and higher fugitive (22.3 vs 3.8%; P = .02) and nebulizer (58.8 vs 7.2%; P = .004) losses with the Volara. There were no differences at the other locations during testing. CONCLUSIONS: The BiWaze Clear system showed greater delivery efficiency than did the Volara during positive expiratory pressure and oscillatory positive airway pressure. The high residual nebulizer dose and fugitive aerosol losses through the handset leak valve contributed to the lower delivery efficiency observed with the Volara. The nebulizer type, circuit design, and handset are important factors when targeting effective aerosol delivery to the lungs with high-frequency assisted airway clearance therapy.

Efficacy and safety of pressurized intraperitoneal aerosol chemotherapy (PIPAC) in ovarian cancer: a systematic review of current evidence.

BACKGROUND: PIPAC is a recent approach for intraperitoneal chemotherapy with promising results for patients with peritoneal carcinomatosis. A systematic review was conducted to assess current evidence on the efficacy and outcomes of PIPAC in patients affected by ovarian cancer. METHODS: The study adhered to the PRISMA guidelines. PubMed, Google Scholar and ClinicalTrials.gov were searched up to December 2023. Studies reporting data on patients with OC treated with PIPAC were included in the qualitative analysis. RESULTS: Twenty-one studies and six clinical trials with 932 patients who underwent PIPAC treatment were identified. The reported first access failure was 4.9%. 89.8% of patients underwent one, 60.7% two and 40% received three or more PIPAC cycles. Pathological tumour response was objectivated in 13 studies. Intra-operative complications were reported in 11% of women and post-operative events in 11.5% with a 0.82% of procedure-related mortality. Quality of life scores have been consistently stable or improved during the treatment time. The percentage of OC patients who became amenable for cytoreductive surgery due to the good response after PIPAC treatment for palliative purposes is reported to be 2.3%. CONCLUSION: The results showed that PIPAC is safe and effective for palliative purposes, with a good pathological tumour response and quality of life. Future prospective studies would be needed to explore the role of this treatment in different stages of the disease, investigating a paradigm shift towards the use of PIPAC with curative intent for women who are not eligible for primary cytoreductive surgery.

Aerosol Delivery to Simulated Spontaneously Breathing Tracheostomized Adult Model With and Without Humidification.

BACKGROUND: Optimal aerosol delivery methods for spontaneously breathing patients with a tracheostomy remain unclear. Thus, we aimed to assess the impact of nebulizer placement, flow settings, and interfaces on aerosol delivery by using a vibrating mesh nebulizer and a jet nebulizer in line with unheated humidification. METHODS: An 8.0-mm tracheostomy tube was connected to the lung model that simulates adult breathing parameters via a collecting filter. Albuterol sulfate (2.5 mg/3 mL) was administered via a vibrating mesh nebulizer and a jet nebulizer, which was placed in line with unheated humidification provided by a large-volume nebulizer, with FIO2 set at 0.28, with gas flows of 2 L/min versus 6 L/min. Nebulizers were placed in line distal and proximal to the lung model by using a tracheostomy collar and a T-piece. Conventional nebulization was tested using a vibrating mesh nebulizer and a jet nebulizer directly connected to the tracheostomy tube bypassing the humidification device. The drug was eluted from the collecting filter and assayed with ultraviolet spectrophotometry (276 nm). RESULTS: During in-line nebulizer placement with unheated humidification, the inhaled dose was 2-4 times higher with a gas flow of 2 L/min than 6 L/min, regardless of nebulizer type, placement, or interface (all P < .05). At 6 L/min, the inhaled dose was higher with proximal than distal placement when using both interfaces, but, at 2 L/min, the inhaled dose was lower with proximal placement. With a jet nebulizer, the tracheostomy collar generated a higher inhaled dose at proximal placement compared with the T-piece, whereas the T-piece resulted in a higher inhaled dose than the tracheostomy collar with distal placement, regardless of the flow settings. Compared with conventional nebulization using a vibrating mesh nebulizer, an in-line vibrating mesh nebulizer with a large-volume nebulizer at 2 L/min had a similar inhaled dose, regardless of nebulizer placement and interface. In contrast, the in-line jet nebulizer was influenced by both placement and interface. CONCLUSIONS: Aerosol delivery with an in-line vibrating mesh nebulizer and jet nebulizer with unheated humidification was affected by nebulizer placement, interface, and gas flow settings.

Aerosol particle dispersion in spontaneous breathing training of oxygen delivery tracheostomized patients on prolonged mechanical ventilation.

BACKGROUND: Tracheostomized patients undergoing liberation from mechanical ventilation (MV) are exposed to the ambient environment through humidified air, potentially heightening aerosol particle dispersion. This study was designed to evaluate the patterns of aerosol dispersion during spontaneous breathing trials in such patients weaning from prolonged MV. METHODS: Particle Number Concentrations (PNC) at varying distances from tracheostomized patients in a specialized weaning unit were quantified using low-cost particle sensors, calibrated against a Condensation Particle Counter. Different oxygen delivery methods, including T-piece and collar mask both with the humidifier or with a small volume nebulizer (SVN), and simple collar mask, were employed. The PNC at various distances and across different oxygen devices were compared using the Kruskal-Wallis test. RESULTS: Of nine patients receiving prolonged MV, five underwent major surgery, and eight were successfully weaned from ventilation. PNCs at distances ranging from 30 cm to 300 cm showed no significant disparity (H(4) = 8.993, p = 0.061). However, significant differences in PNC were noted among oxygen delivery methods, with Bonferroni-adjusted pairwise comparisons highlighting differences between T-piece or collar mask with SVN and other devices. CONCLUSION: Aerosol dispersion within 300 cm of the patient was not significantly different, while the nebulization significantly enhances ambient aerosol dispersion in tracheostomized patients on prolonged MV.

The sedative effect of intranasal administration of medetomidine using a mucosal atomization device in Japanese White rabbits.

To prevent aspiration in Japanese White (JW) rabbits, the maximum single volume of medetomidine administered intranasally is 0.3 mL per nostril using a mucosal atomization device (MAD). This study aimed to examine the sedative effect of intranasal administration of medetomidine using MAD in eight healthy female JW rabbits. Each rabbit received intranasal atomization (INA) of saline (Control treatment) along with three doses of 1 mg/mL medetomidine (0.3 mL to one nostril [MED0.3 treatment]; 0.3 mL each to both nostrils [MED0.6 treatment]; 0.3 mL twice to both nostrils [MED1.2 treatment]), with a washout period of at least 7 days between treatments. The actual doses of medetomidine were 82 (75-84) µg/kg (median [25th-75th percentile]), 163 (156-168) µg/kg, and 323 (295-343) µg/kg for the MED0.3, MED0.6, and MED1.2 treatments, respectively. A medetomidine-dose dependent sedative effect was detected, and the loss of righting reflex (LRR) was achieved in one rabbit at 18 min, seven rabbits at 11 (9-18) min, and eight rabbits at 7 (4-18) min after the MED0.3, MED0.6, and MED1.2 treatments, respectively. The LRR was maintained for 63 (29-71) min and 83 (68-101) min after the MED0.6 and MED1.2 treatments, respectively. Additionally, the INA of medetomidine produced a significant dose-dependent cardiorespiratory depression including a decrease in pulse rate, respiratory rate, percutaneous oxygen saturation, and arterial partial pressure of oxygen, and an increase in arterial partial pressure of carbon dioxide in the rabbits.

Avaliação da efetividade da esterilização por luz ultravioleta em aerossóis contaminados por Sars-Cov-2 / Evaluation of the effectiveness of ultraviolet light sterilization in aerosols contaminated by Sars-Cov-2 / Evaluación de la eficacia de la esterilización por luz ultravioleta en aerosoles contaminados por Sars-Cov-2

O contato direto e a disseminação aérea são os principais mecanismos de transmissão do SARS-CoV-2. Uma abordagem direta para limitar as transmissões virais no ar é inativá-las dentro de um curto período de tempo após sua produção é a luz ultravioleta C (UVC). Neste sentido, o objetivo do presente estudo foi de avaliar a efetividade do uso de luz ultravioleta na esterilização de aerossóis contaminados pelo SARS-CoV-2. Para o estudo foram analisados todos os pacientes que estavam internados na enfermaria COVID com resultados dos swabs positivos. O paciente escolhido para o estudo encontrava-se com resultado positivo e com 8 dias de sintomas. As medições de contaminação da deposição de aerossol na mesa de tomografia foram realizadas em triplicatas, utilizando swabs estéreis com meio de transporte viral. O paciente foi mantido sozinho dentro desta sala por 30 minutos produzindo aerossóis para que pudesse ocorrer contaminação do ar. Após, foram realizadas as medições utilizando a exposição à luz ultravioleta C, coletada nos minutos 0, 5, 10, 15, 30, 60, 120 e 180, após o paciente ter deixado a sala de tomografia. Esta sequência de medições foi realizada por 6 dias, sendo o primeiro dia sem a exposição da luz UVC e 5 dias com a exposição da luz UVC. Após a coleta dos dados, foi realizada a análise dos swabs para os resultados através do método RT-PCR. Os resultados encontrados das coletas desde o tempo 0 até 180 minutos foram negativos para os 6 dias de estudo. Os resultados dos swabs do paciente seguiram positivos do primeiro até o último dia de estudo. Sendo assim, conclui-se a efetividade da utilização da luz ultravioleta como uma forma de descontaminação, juntamente com a ação antimicrobiana do desinfetante, pois a ausência do vírus vivo evidencia a importância de cuidados de higienização para evitar a reincidência da contaminação após a limpeza.

Direct contact and aerial dissemination are the main transmission mechanisms of SARS-CoV-2. A direct approach to limiting airborne viral transmissions is to inactivate them within a short period of time after their production is ultraviolet C (UVC) light. In this sense, the objective of the present study was to evaluate the effectiveness of using ultraviolet light in the sterilization of aerosols contaminated by SARS-CoV-2. For the study, all patients who were admitted to the COVID ward with positive swab results were analyzed. The patient chosen for the study had a positive result and had had 8 days of symptoms. Measurements of contamination from aerosol deposition on the CT table were performed in triplicate, using sterile swabs with viral transport medium. The patient was kept alone inside this room for 30 minutes, producing aerosols so that air contamination could occur. Afterwards, measurements were performed using exposure to ultraviolet C light, collected at 0, 5, 10, 15, 30, 60, 120 and 180 minutes, after the patient had left the tomography room. This sequence of measurements was carried out in 6 days, the first day being without exposure to UVC light and 5 days with exposure to UVC light. After data collection, swab analysis was performed for the results using the RT-PCR method. The results found for collections from time 0 to 180 minutes were negative for the 6 days of study. The patient's swab results were positive from the first to the last day of the study. Thus, the effectiveness of using ultraviolet light as a form of decontamination is concluded, along with the antimicrobial action of the disinfectant, as the absence of the live virus highlights the importance of hygiene care to prevent the recurrence of contamination after cleaning.

El contacto directo y el contagio por vía aérea son los principales mecanismos de transmisión del SRAS-CoV-2. Un enfoque directo para limitar las transmisiones virales en el aire es inactivarlas en un corto período de tiempo después de su producción es la luz ultravioleta C (UVC). En este sentido, el objetivo del presente estudio fue evaluar la eficacia del uso de la luz ultravioleta en la esterilización de aerosoles contaminados con el SARS-CoV-2. Se analizaron todos los pacientes ingresados en la sala COVID con resultados positivos de los hisopos. El paciente elegido para el estudio era positivo y llevaba 8 días con síntomas. Las mediciones de la contaminación por deposición de aerosoles en la mesa de TC se realizaron por triplicado utilizando hisopos estériles con medio de transporte viral. El paciente se mantuvo solo dentro de esta habitación durante 30 minutos produciendo aerosoles para que se produjera la contaminación del aire. A continuación, se realizaron mediciones mediante la exposición a la luz ultravioleta C, recogidas a los 0, 5, 10, 15, 30, 60, 120 y 180 minutos después de que el paciente saliera de la sala de tomografía. Esta secuencia de mediciones se realizó durante 6 días, el primer día sin exposición a la luz UVC y 5 días con exposición a la luz UVC. Tras la recogida de datos, se realizó el análisis de los hisopos para obtener los resultados mediante el método RT-PCR. Los resultados encontrados en las recolecciones desde el tiempo 0 hasta los 180 minutos fueron negativos para los 6 días de estudio. Los resultados de los hisopos de los pacientes siguieron siendo positivos desde el primer hasta el último día del estudio. Así, se concluye la eficacia del uso de la luz ultravioleta como forma de descontaminación, junto con la acción antimicrobiana del desinfectante, ya que la ausencia de virus vivos pone de manifiesto la importancia de los cuidados higiénicos para evitar la reaparición de la contaminación tras la limpieza.

Aerosol delivery, but not intramuscular injection, of adenovirus-vectored tuberculosis vaccine induces respiratory-mucosal immunity in humans.

BackgroundAdenovirus-vectored (Ad-vectored) vaccines are typically administered via i.m. injection to humans and are incapable of inducing respiratory mucosal immunity. However, aerosol delivery of Ad-vectored vaccines remains poorly characterized, and its ability to induce mucosal immunity in humans is unknown. This phase Ib trial evaluated the safety and immunogenicity of human serotype-5 Ad-vectored tuberculosis (TB) vaccine (AdHu5Ag85A) delivered to humans via inhaled aerosol or i.m. injection.MethodsThirty-one healthy, previously BCG-vaccinated adults were enrolled. AdHu5Ag85A was administered by single-dose aerosol using Aeroneb Solo Nebulizer or by i.m. injection. The study consisted of the low-dose (LD) aerosol, high-dose (HD) aerosol, and i.m. groups. The adverse events were assessed at various times after vaccination. Immunogenicity data were collected from the peripheral blood and bronchoalveolar lavage samples at baseline, as well as at select time points after vaccination.ResultsThe nebulized aerosol droplets were < 5.39 µm in size. Both LD and HD of AdHu5Ag85A administered by aerosol inhalation and i.m. injection were safe and well tolerated. Both aerosol doses, particularly LD, but not i.m., vaccination markedly induced airway tissue-resident memory CD4+ and CD8+ T cells of polyfunctionality. While as expected, i.m. vaccination induced Ag85A-specific T cell responses in the blood, the LD aerosol vaccination also elicited such T cells in the blood. Furthermore, the LD aerosol vaccination induced persisting transcriptional changes in alveolar macrophages.ConclusionInhaled aerosol delivery of Ad-vectored vaccine is a safe and superior way to elicit respiratory mucosal immunity. This study warrants further development of aerosol vaccine strategies against respiratory pathogens, including TB and COVID-19.Trial registrationClinicalTrial.gov, NCT02337270.FundingThe Canadian Institutes for Health Research (CIHR) and the Natural Sciences and Engineering Research Council of Canada funded this work.

Aerosol release, distribution, and prevention during aerosol therapy: a simulated model for infection control.

Aerosol therapy is used to deliver medical therapeutics directly to the airways to treat respiratory conditions. A potential consequence of this form of treatment is the release of fugitive aerosols, both patient derived and medical, into the environment and the subsequent exposure of caregivers and bystanders to potential viral infections. This study examined the release of these fugitive aerosols during a standard aerosol therapy to a simulated adult patient. An aerosol holding chamber and mouthpiece were connected to a representative head model and breathing simulator. A combination of laser and Schlieren imaging was used to non-invasively visualize the release and dispersion of fugitive aerosol particles. Time-varying aerosol particle number concentrations and size distributions were measured with optical particle sizers at clinically relevant positions to the simulated patient. The influence of breathing pattern, normal and distressed, supplemental air flow, at 0.2 and 6 LPM, and the addition of a bacterial filter to the exhalation port of the mouthpiece were assessed. Images showed large quantities of fugitive aerosols emitted from the unfiltered mouthpiece. The images and particle counter data show that the addition of a bacterial filter limited the release of these fugitive aerosols, with the peak fugitive aerosol concentrations decreasing by 47.3-83.3%, depending on distance from the simulated patient. The addition of a bacterial filter to the mouthpiece significantly reduces the levels of fugitive aerosols emitted during a simulated aerosol therapy, p≤ .05, and would greatly aid in reducing healthcare worker and bystander exposure to potentially harmful fugitive aerosols.

Exploring Insulin Production Following Alveolar Islet Transplantation (AIT).

Recent studies have demonstrated the feasibility of islet implantation into the alveoli. However, until today, there are no data on islet behavior and morphology at their transplant site. This study is the first to investigate islet distribution as well insulin production at the implant site. Using an ex vivo postmortem swine model, porcine pancreatic islets were isolated and aerosolized into the lung using an endoscopic spray-catheter. Lung tissue was explanted and bronchial airways were surgically isolated and connected to a perfusor. Correct implantation was confirmed via histology. The purpose of using this new lung perfusion model was to measure static as well as dynamic insulin excretions following glucose stimulation. Alveolar islet implantation was confirmed after aerosolization. Over 82% of islets were correctly implanted into the intra-alveolar space. The medium contact area to the alveolar surface was estimated at 60 +/- 3% of the total islet surface. The new constructed lung perfusion model was technically feasible. Following static glucose stimulation, insulin secretion was detected, and dynamic glucose stimulation revealed a biphasic insulin secretion capacity during perfusion. Our data indicate that islets secrete insulin following implantation into the alveoli and display an adapted response to dynamic changes in glucose. These preliminary results are encouraging and mark a first step toward endoscopically assisted islet implantation in the lung.

Spray-freeze-dried inhalable composite microparticles containing nanoparticles of combinational drugs for potential treatment of lung infections caused by Pseudomonas aeruginosa.

The multi-drug resistance of Pseudomonas aeruginosa is an overwhelming cause of terminal and persistent lung infections in cystic fibrosis (CF) patients. Antimicrobial synergy has been shown for colistin and ivacaftor, and our study designed a relatively high drug-loading dry powder inhaler formulation containing nanoparticles of ivacaftor and colistin. The ivacaftor-colistin nanosuspensions (Iva-Col-NPs) were prepared by the anti-solvent method with different stabilizers. Based on the aggregation data, the formulation 7 (F7) with DSPG-PEG-OMe as the stabilizer was selected for further studies. The F7 consisted of ivacaftor, colistin and DSPG-PEG-OMe with a mass ratio of 1:1:1. The F7 powder formulation was developed using the ultrasonic spray-freeze-drying method and exhibited a rough surface with relatively high fine particle fraction values of 61.4 ± 3.4% for ivacaftor and 63.3 ± 3.3% for colistin, as well as superior emitted dose of 97.8 ± 0.3% for ivacaftor and 97.6 ± 0.5% for colistin. The F7 showed very significant dissolution improvement for poorly water soluble ivacaftor than the physical mixture. Incorporating two drugs in a single microparticle with synchronized dissolution and superior aerosol performance will maximize the synergy and bioactivity of those two drugs. Minimal cytotoxicity in Calu-3 human lung epithelial cells and enhanced antimicrobial activity against colistin-resistant P. aeruginosa suggested that our formulation has potential to improve the treatment of CF patients with lung infections.

Assessment of in vitro kinetics and biological impact of nebulized trehalose on human bronchial epithelium.

Trehalose is added in drug formulations to act as fillers or improve aerosolization performance. Its characteristics as a carrier molecule have been explored; however, the fate of trehalose in human airway tissues has not been thoroughly investigated. Here, we investigated the fate of nebulized trehalose using in vitro human air-liquid bronchial epithelial cultures. First, a tracing experiment was conducted using 13C12-trehalose; we measured trehalose distribution in different culture compartments (apical surface liquid, epithelial culture, and basal side medium) at various time points following acute exposure to 13C12-labeled trehalose. We found that 13C12-trehalose was metabolized into 13C6-glucose. The data was then used to model the kinetics of trehalose disappearance from the apical surface of bronchial cultures. Secondly, we evaluated the potential adverse effects of nebulized trehalose on the bronchial cultures after they were acutely exposed to nebulized trehalose up to a level just below its solubility limit (50 g/100 g water). We assessed the ciliary beating frequency and histological characteristics. We found that nebulized trehalose did not lead to marked alteration in ciliary beating frequency and morphology of the epithelial cultures. The in vitro testing approach used here may enable the early selection of excipients for future development of inhalation products.

Pulmonary in vitro instruments for the replacement of animal experiments.

Advanced in vitro systems often combine a mechanical-physical instrument with a biological component e.g. cell culture models. For testing of aerosols, it is of advantage to consider aerosol behavior, particle deposition and lung region specific cell lines. Although there are many good reviews on the selection of cell cultures, articles on instruments are rare. This article focuses on the development of in vitro instruments targeting the exposure of aerosols on cell cultures. In this context, guidelines for toxicity investigation are taken into account as the aim of new methods must be the prediction of human relevant data and the replacement of existing animal experiments. We provide an overview on development history of research-based instruments from a pharmaceutical point of view. The standardized commercial devices resulting from the research-based instruments are presented and the future perspectives on pulmonary in vitro devices are discussed.

In vitro-in vivo correlation of cascade impactor data for orally inhaled pharmaceutical aerosols.

In vitro-in vivo correlation is the establishment of a predictive relationship between in vitro and in vivo data. In the context of cascade impactor results of orally inhaled pharmaceutical aerosols, this involves the linking of parameters such as the emitted dose, fine particle dose, fine particle fraction, and mass median aerodynamic diameter to in vivo lung deposition from scintigraphy data. If the dissolution and absorption processes after deposition are adequately understood, the correlation may be extended to the pharmacokinetics and pharmacodynamics of the delivered drugs. Correlation of impactor data to lung deposition is a relatively new research area that has been gaining recent interest. Although few in number, experiments and meta-analyses have been conducted to examine such correlations. An artificial neural network approach has also been employed to analyse the complex relationships between multiple factors and responses. However, much research is needed to generate more data to obtain robust correlations. These predictive models will be useful in improving the efficiency in product development by reducing the need of expensive and lengthy clinical trials.

An in vitro visual study of fugitive aerosols released during aerosol therapy to an invasively ventilated simulated patient.

COVID-19 can cause serious respiratory complications resulting in the need for invasive ventilatory support and concurrent aerosol therapy. Aerosol therapy is considered a high risk procedure for the transmission of patient derived infectious aerosol droplets. Critical-care workers are considered to be at a high risk of inhaling such infectious droplets. The objective of this work was to use noninvasive optical methods to visualize the potential release of aerosol droplets during aerosol therapy in a model of an invasively ventilated adult patient. The noninvasive Schlieren imaging technique was used to visualize the movement of air and aerosol. Three different aerosol delivery devices: (i) a pressurized metered dose inhaler (pMDI), (ii) a compressed air driven jet nebulizer (JN), and (iii) a vibrating mesh nebulizer (VMN), were used to deliver an aerosolized therapeutic at two different positions: (i) on the inspiratory limb at the wye and (ii) on the patient side of the wye, between the wye and endotracheal tube, to a simulated intubated adult patient. Irrespective of position, there was a significant release of air and aerosol from the ventilator circuit during aerosol delivery with the pMDI and the compressed air driven JN. There was no such release when aerosol therapy was delivered with a closed-circuit VMN. Selection of aerosol delivery device is a major determining factor in the release of infectious patient derived bioaerosol from an invasively mechanically ventilated patient receiving aerosol therapy.

In vitro and ex vivo models in inhalation biopharmaceutical research - advances, challenges and future perspectives.

Oral inhalation results in pulmonary drug targeting and thereby reduces systemic side effects, making it the preferred means of drug delivery for the treatment of respiratory disorders such as asthma, chronic obstructive pulmonary disease or cystic fibrosis. In addition, the high alveolar surface area, relatively low enzymatic activity and rich blood supply of the distal airspaces offer a promising pathway to the systemic circulation. This is particularly advantageous when a rapid onset of pharmacological action is desired or when the drug is suffering from stability issues or poor biopharmaceutical performance following oral administration. Several cell and tissue-based in vitro and ex vivo models have been developed over the years, with the intention to realistically mimic pulmonary biological barriers. It is the aim of this review to critically discuss the available models regarding their advantages and limitations and to elaborate further which biopharmaceutical questions can and cannot be answered using the existing models.

Robustness of aerosol delivery of amikacin liposome inhalation suspension using the eFlow® Technology.

The purpose of these studies was to understand the effect on product performance of batch-to-batch variability in both the amikacin liposome inhalation suspension (ALIS) formulation and its delivery device, the Lamira® nebulizer system, designed and manufactured by PARI (PARI Pharma GmbH, Munich, Germany). Three batches of ALIS spanning a range of lipid concentrations (43, 48 and 54 mg/mL) were tested with nine PARI inhalation devices that varied within the production process of the vibrating membrane with respect to hole geometry. Three hole geometry clusters were built including a geometry close to the mean geometry (median) and two geometries deviating from the mean geometry with smaller (smaller) and larger (larger) holes. The output parameters included the nebulization rate, the aerosol droplet size distribution, the liposome vesicle size post-nebulization, and the fraction of amikacin that remained encapsulated post-nebulization. Across the 27 experimental combinations of three formulation batches and nine devices, the nebulization time varied between 12 and 15 min with the fastest nebulization rate occurring with the combination of low lipid concentration and larger hole geometry (0.68 g/min) and the slowest nebulization rate occurring with the combination of high lipid concentration and the smaller hole geometry (0.59 g/min). The mean liposome vesicle size post-nebulization ranged from 269 to 296 nm across all experimental combinations which was unchanged from the control samples (276-292 nm). While all three batches contained > 99% encapsulated amikacin prior to nebulization, the nebulization process resulted in a consistent generation of ~ 35% unencapsulated amikacin (range: 33.8% to 37.6%). There was no statistically significant difference in the generated aerosol particle size distributions. The mass median aerodynamic diameters (MMAD) ranged from 4.78 µm to 4.98 µm, the geometric standard deviations (GSD) ranged from 1.61 to 1.66, and the aerosol fine particle fraction (FPF < 5 µm) ranged from 50.3 to 53.5%. The emitted dose (ED) of amikacin ranged from 473 to 523 mg (80.2 to 89.3% of loaded dose (LD)) and the fine particle dose (FPD < 5 µm) ranged from 244 to 278 mg (41.4 to 47.1% of label claim (LC)). In conclusion, while variations in the lipid concentration of the ALIS formulation and the device hole geometry had a small but significant impact on nebulization time, the critical aerosol performance parameters were maintained and remained within acceptable limits.