Clinical follow-up evaluation of Dalbo®-Rotex® retention elements in the private practice

The aim of this retrospective study was to investigate the clinical outcome of Dalbo®-Rotex® retention elements in a private practice. The majority of the retention elements was fixed with self-adhesive composite cement, and in almost 40% the exposed root surface was additionally covered with composite. The success rate of 96.3% after 24 months in a total of 50 included patients (response rate 48.5%) demonstrated that a simple and cost-effective fixation of removable dentures using prefabricated, chair-side inserted retention elements is feasible. Maintenance care comprised single or repeated replacement and activation of the female part in 12.3% and 39.4% of the cases, respectively. Fractures were rare, occurring in 3.4% of the cases and more likely in patients with parafunctional habits. Frequent oral hygiene correlated with probing depths up to 3 mm at the maxi- mum, while the risk of greater probing depths associated with less frequent oral hygiene increased by a factor of 2.4. Patients' assessment of the parameters handling and wearing comfort, chewing ability and prosthesis retention was predominantly positive. Based on the findings of the study, covering of exposed dentin areas with composite resin and regular recall comprising professional cleaning, fluoride application and oral hygiene instruction are recommended.

Cost-effectiveness of implant-supported mandibular removable partial dentures.

OBJECTIVES: The aim of this study was to conduct a cost-effectiveness analysis comparing conventional removable partial dentures (RPDs) and implant-supported RPDs (ISRPDs) treatment in patients with an edentulous maxilla and a bilateral free-ending situation in the mandible. MATERIAL AND METHODS: Thirty subjects were included. A new RPD was made and implant support was provided 3 months later. Treatment costs (opportunity costs and costs based on tariffs) were calculated. Treatment effect was expressed by means of the Dutch Oral Health Impact Profile questionnaire (OHIP-NL49), a chewing ability test (Mixing Ability Index, MAI) and a short-form health survey measuring perceived general health (SF-36), which was subsequently converted into quality-adjusted-life-years (QALYs). The incremental cost-effectiveness ratio (ICER) was the primary outcome measure of cost-effectiveness, comparing both treatment strategies. RESULTS: The mean total opportunity costs were €981 (95% CI €971-€991) for the RPD treatment and €2.480 (95% CI €2.461-€2.500) for the ISRPD treatment. The total costs derived from the national tariff structure were €850 for the RPD treatment and €2.610 for the ISRPD treatment. The ICER for OHIP-NL49 and MAI using the opportunity costs was €80 and €786, respectively. When using the tariff structure, corresponding ICERs were €94 and €921. The effect of supporting an RPD with implants when expressed in QALYs was negligible; hence an ICER was not determined. CONCLUSIONS: It is concluded that depending on the choice of outcome measure and monetary threshold, supporting an RPD with implants is cost-effective when payers are willing to pay more than €80 per OHIP point gained. Per MAI point gained, an additional €786 has to be invested.

The relative patient costs and availability of dental services, materials and equipment in public oral care facilities in Tanzania.

BACKGROUND: Patient charges and availability of dental services influence utilization of dental services. There is little available information on the cost of dental services and availability of materials and equipment in public dental facilities in Africa. This study aimed to determine the relative cost and availability of dental services, materials and equipment in public oral care facilities in Tanzania. The local factors affecting availability were also studied. METHODS: A survey of all district and regional dental clinics in selected regions was conducted in 2014. A total of 28/30 facilities participated in the study. A structured interview was undertaken amongst practitioners and clinic managers within the facilities. Daily resources for consumption (DRC) were used for estimation of patients' relative cost. DRC are the quantified average financial resources required for an adult Tanzanian's overall consumption per day. RESULTS: Tooth extractions were found to cost four times the DRC whereas restorations were 9-10 times the DRC. Studied facilities provided tooth extractions (100%), scaling (86%), fillings (79%), root canal treatment (46%) and fabrication of removable partial dentures (32%). The ratio of tooth fillings to extractions in the facilities was 1:16. Less than 50% of the facilities had any of the investigated dental materials consistently available throughout the year, and just three facilities had all the investigated equipment functional and in use. CONCLUSIONS: Dental materials and equipment availability, skills of the practitioners and the cost of services all play major roles in provision and utilization of comprehensive oral care. These factors are likely to be interlinked and should be taken into consideration when studying any of the factors individually.

Shortened dental arch concept shown to be cost effective.

DESIGN: Randomised controlled trial. INTERVENTION: All patients received treatment to render them dentally fit. Patients were randomly allocated to either the removable dental prostheses (RPD) or the shortened dental arch (SDA) group. Patients in the RDP group were restored to complete arches with RDP using cobalt-chromium frameworks according to a standardised protocol. For the SDA group, patients were restored to a shortened arch of ten occluding pairs of natural and replacement teeth using resin-bonded bridgework (RBB). OUTCOME MEASURE: Treatment effect was measured using the change in oral health-related quality of life (OHrQOL). For each patient the costs of delivering treatment were recorded by a research nurse during the intervention period. Laboratory costs were recorded as part of normal hospital policy for all patients. All of the dental materials used were recorded and given a unit price. The cost of professional time per patient was estimated using the highest point of the salary scale for the Community Dental Service in Ireland. RESULTS: One hundred and thirty-two patients were randomised; 65 to the RPD group and 67 to the SDA group. Ninety-two patients (69.7%) completed the study (46 in RPD group; 46in SDA group). There was no difference in the success rates of the two treatments over the period. Five pieces of resin-bonded bridgework (RBB) debonded and were recemented over the 12-month period giving a success rate of 95.5% for the RBB. Four patients discontinued wearing their RPDs; all four RPDS were fitted in the lower arch and included bilateral free end saddles, a success rate of 95.9%. Both RPD and SDA groups demonstrated statistically significant improvements in OHrQoL scores after 12 months.The total cost of achieving the minimally important clinical difference (MID) in OHrQOL for an average patient in the RDP group was [euro ]464.64. For the SDA group, the cost of achieving the MID for an average patient was [euro ]252.00. The cost-effectiveness ratio was therefore 1:1.84 in favour of SDA treatment. CONCLUSIONS: With an increasingly ageing population, many patients will continue to benefit from removable prostheses to replace their missing natural teeth. From a purely economic standpoint, the results from this analysis suggest that the treatment of partially dentate older adults should be focused on functionally orientated treatment because it is simply more cost-effective.

Reimbursement systems influence prosthodontic treatment of adult patients.

OBJECTIVE: To evaluate the influence of reimbursement system and organizational structure on oral rehabilitation of adult patients with tooth loss. MATERIALS AND METHODS: Patient data were retrieved from the databases of the Swedish Social Insurance Agency. The data consisted of treatment records of patients aged 19 years and above claiming reimbursement for dental care from July 1, 2007 until June 30, 2009. Before July 1, 2008, a proportionately higher level of subsidy was available for dental care in patients 65 years and above, but thereafter the system was changed, so that the subsidy was the same, regardless of the patient's age. Prosthodontic treatment in patients 65 years and above was compared with that in younger patients before and after the change of the reimbursement system. Prosthodontic treatment carried out in the Public Dental Health Service and the private sector was also analyzed. RESULTS: Data were retrieved for 722,842 adult patients, covering a total of 1,339,915 reimbursed treatment items. After the change of the reimbursement system, there was a decrease in the proportion of items in patients 65 years and above in relation to those under 65. Overall, there was a minimal change in the proportion of treatment items provided by the private sector compared to the public sector following the change of the reimbursement system. CONCLUSIONS: Irrespective of service provider, private or public, financial incentive such as the reimbursement system may influence the provision of prosthodontic treatment, in terms of volume of treatment.

Dental technology services and industry trends in New Zealand from 2010 to 2012.

OBJECTIVE: To provide a snapshot of the New Zealand dental technology industry and influencing factors. BACKGROUND: Developing an understanding of the commercial dental laboratory environment in New Zealand can provide insight into the entire dental industry. METHODS: A web-based survey was the primary method for data collection, with separate questionnaires used for dental laboratory owners and dental technician employees. RESULTS: The mean net income for dental laboratory owners in New Zealand was similar to that of the United Kingdom, at $40.50 per hour. Clinical dental technicians are the highest paid employees, with a mean of $33.49 per hour. The mean technical charge for complete dentures was $632.59; including clinical services, it was $1907.00. The mean charge for a porcelain-fused-to-metal (PFM) crown was $290.27. Dental laboratory owners expressed fear about the possibility of losing dental clients to overseas laboratories due to the availability and cheap charge of offshore work. Only 25.4% of dental laboratories surveyed had computer-aided design (CAD) facilities, and even fewer (7.9%) had computer-aided manufacturing (CAM) systems. CONCLUSION: Clinical dental technology appears to be prospering. The dental technology industry appears to be adapting and remains viable, despite facing many challenges.

Cost-effectiveness of tooth replacement strategies for partially dentate elderly: a randomized controlled clinical trial.

OBJECTIVE: To conduct a cost-effectiveness analysis comparing two different tooth replacement strategies for partially dentate older patients, namely partial removable dental prostheses (RDP) and functionally orientated treatment based on the shortened dental arch concept (SDA). METHODS: Ninety-two partially dentate older patients completed a randomized controlled clinical trial. Patients were randomly allocated to two treatment groups: the RDP group and the SDA group. Treatment effect was measured using impact on oral health-related quality of life (OHrQOL), and the costs involved in providing and maintaining care were recorded for all patients. Patients were followed for 12 months after treatment intervention. All treatment was provided by a single operator. RESULTS: The total cost of achieving the minimally important clinical difference (MID) in OHrQOL for an average patient in the RDP group was €464.64. For the SDA group, the cost of achieving the MID for an average patient was €252.00. The cost-effectiveness ratio was therefore 1:1.84 in favour of SDA treatment. CONCLUSION: With an increasingly ageing population, many patients will continue to benefit from removable prostheses to replace their missing natural teeth. From a purely economic standpoint, the results from this analysis suggest that the treatment of partially dentate older adults should be focused on functionally orientated treatment because it is simply more cost-effective.

A preliminary report of the cost-effectiveness of tooth replacement strategies for partially dentate elders.

OBJECTIVE: To compare the cost-effectiveness of conventional treatment using partial dentures with functionally orientated treatment to replace missing teeth for partially dentate elders using a randomised controlled clinical trial. BACKGROUND: In many countries, including the Republic of Ireland, the only publically funded treatment option offered to partially dentate older patients is a removable partial denture. However, evidence suggests that these removable prostheses are unpopular with patients and can potentially increase the risk of further dental disease and subsequent tooth loss. MATERIALS AND METHODS: Fourty-four partially dentate patients aged 65 years and older were recruited. Patients were randomly assigned to the two treatment arms of the study. The conventional treatment group received removable partial dentures to replace all missing natural teeth. The functionally orientated group was restored to a Shortened Dental Arch (SDA) of 10 occluding contacts using resin-bonded bridgework (RBB). The costs associated with each treatment were recorded. Effectiveness was measured in terms of the impact on oral health-related quality of life (OHRQoL) using OHIP-14. RESULTS: Both groups reported improvements in OHRQoL 1 month after completion of treatment. The conventional treatment group required 8.3 clinic visits as compared to 4.4 visits for the functionally orientated group. The mean total treatment time was 183 min 19 s for the conventional group vs. 124 min 8 s for the functionally orientated group. The average cost of treatment for the conventional group was 487.74 Euros compared to 356.20 Euros for the functional group. CONCLUSIONS: Functionally orientated treatment was more cost-effective than conventional treatment in terms of treatment effect and opportunity costs to the patients' time.

Private practice of prosthodontists: current conditions of practice in the United States.

PURPOSE: The purpose of this article is to examine data and results from the 2008 Survey of Prosthodontists. Survey results are used to examine current trends and characteristics of prosthodontists in private practice. MATERIALS AND METHODS: Characteristics of prosthodontists and conditions of private practice are based on surveys conducted in 2002, 2005, and 2008 sponsored by the American College of Prosthodontists. Survey results are used to estimate several characteristics including age, gender, number of patient visits, hours in the practice, employment of staff, referral sources, and financial conditions (gross receipts, expenses of the practice, and net income of prosthodontists). RESULTS: The average age of a private-practicing prosthodontist reached 51 years in 2007; 12.3 is the number of years in the current practice; and most prosthodontists (71%) are solo private practitioners. The average amount of time per week by prosthodontists in the practice averaged 36.1 hours, and prosthodontists treated an average of 44.1 patient visits per week. The largest source of patient referrals is the patient themselves. The largest percentage of a prosthodontist's treatment time is spent rendering procedures in fixed prosthodontics, but this percentage has declined since 2001. In 2007, the average gross billings of a practicing prosthodontist reached $805,675; average total practice expenses were $518,255; the mean net earnings of practitioners were $268,930. CONCLUSION: In 2007, prosthodontists in private practice paid out about $1.4 billion in practice expenses to provide $2.2 billion dollars in prosthodontic care. Based on survey results from 2007 and the previous 6 years, specialization in prosthodontic care continues to be an economically attractive and productive healthcare profession in the United States.

Evaluation of the cost-effectiveness of root canal treatment using conventional approaches versus replacement with an implant.

AIM: To evaluate the cost-effectiveness of root canal treatment for a maxillary incisor tooth with a pulp infection, in comparison with extraction and replacement with a bridge, denture or implant supported restoration. METHODOLOGY: A Markov model was built to simulate the lifetime path of restorations placed on the maxillary incisor following the initial treatment decision. It was assumed that the goal of treatment was the preservation of a fixed platform support for a crown without involving the adjacent teeth. Consequently, the model estimates the lifetime costs and the total longevity of tooth and implant supported crowns at the maxillary incisor site. The model considers the initial treatment decisions, and the various subsequent treatment decisions that might be taken if initial restorations fail. RESULTS: Root canal treatment extended the life of the tooth at an additional cost of pound5-8 per year of tooth life. Provision of orthograde re-treatment, if the root canal treatment fails returns further extension of the expected life of the tooth at a cost of pound12-15 per year. Surgical re-treatment is not cost-effective; it is cheaper, per year, to extend the life of the crown by replacement with a single implant restoration if orthograde endodontic treatment fails. CONCLUSION: Modelling the available clinical and cost data indicates that, root canal treatment is highly cost-effective as a first line intervention. Orthograde re-treatment is also cost-effective, if a root treatment subsequently fails, but surgical re-treatment is not. Implants may have a role as a third line intervention if re-treatment fails.

Socioeconomic indicators and prosthetic replacement of missing teeth in a working-age population--results of the Study of Health in Pomerania (SHIP).

OBJECTIVES: To analyse the possible effects of the socioeconomic status (SES) on the prosthetic replacement of missing teeth in working-age people and to explore the role of potential confounders. METHODS: Cross-sectional data were collected from 2310 German adults aged 30-59 years. The relationship between each of the three SES indicators (education, income, and occupational status) and dental prostheses were examined by multinomial logistic regression analyses. For that, partially dentate participants with suboptimal and no replacement of missing teeth were compared with partially dentate participants having optimal replacement. Potential confounders (age, sex, dental status, social network and social support) were entered if their inclusion in the model led to >or= 10% change in the coefficient of interest. RESULTS: Social network and social support did not meet the criterion for confounding. In the maxilla, having no replacement was positively associated with lower categories for each of the three SES indicators [Odds ratios (OR) between 1.6 and 2.1; 95% confidence intervals (CI) between 1.1 and 3.4]. Low occupational status was the single predictor for suboptimal dental prostheses (OR=3.2; 95% CI: 1.6-6.2). In the mandible, occupational status showed no association with the prosthetic status, whereas low educational level and low household income were determinants for having no replacement (OR=1.9 and 1.9, 95% CI: 1.0-3.5 and 1.1-3.0, respectively). Low household income was the single determinant for suboptimal replacement of missing teeth (OR=2.4, 95% CI=1.1-5.2). CONCLUSION: The findings may indicate the relevance of the financing of prosthodontic treatment. The strong association between various forms of upper dentures and occupational prestige can be seen as key contributing concept to how individuals' characteristics affect the outcome in prosthodontic care.

Acrylic partial dentures--interim or permanent prostheses?

An acrylic partial denture (APD) is one option for replacing missing teeth and is also the most cost effective treatment option. Dentists are faced with the demand for replacing missing teeth from patients with limited financial resources; therefore the replacement of missingteeth with an APD is a common occurrence. One of the disadvantages of APD's is its poor strength. Dentists and dental technicians tend to design and construct acrylic partial dentures with little or no tooth support. This can have a detrimental effect on the surrounding hard as well as soft tissue. This article argues that APD's can be considered as a permanent prosthesis, provided that proper patient selection, education and the principles of partial denture design are adhered to.

Attitudes and practice in the provision of removable partial dentures.

OBJECTIVE: To identify the factors shaping the pattern of removable partial denture (RPD) provision by dentists in England. Design Cross sectional survey of general dental practitioners. METHODS: Details of current practice and provision, influences, attitudes and demographic details were collected using a self-completion questionnaire mailed to general dental practitioners identified through the Dental Practice Board register. RESULTS: Three hundred and eighty-five questionnaires were returned by general dental practitioners from 62 health authorities throughout England. The most important factor reported as influencing both the GDP's decision to provide a partial denture and its subsequent success was patient desire to have a partial denture. Constructing the denture from cobalt chrome, advising the patient on aftercare, making time available to make minor adjustments and being responsible for design were all factors dentists associated with success of a RPD. However, for a number of dentists there was a reported divergence between knowledge and practice. CONCLUSION: Overall it is clear that provision of partial dentures continues to be patient led. However, the decision making process is also influenced by a number of factors including time, cost and the NHS fee structure.

Why do dentists struggle with removable partial denture design? An assessment of financial and educational issues.

AIM: Published studies in the international dental literature illustrate that the quality of prescription and fabrication of cobalt-chromium removable partial dentures (CCRPDs) by general dental practitioners frequently fail to comply with ethical and legal requirements. The reasons cited for this in the past have broadly related to either financial or educational issues. The aim of this investigation is to determine the effect of financial and educational factors on the quality of CCRPD design and fabrication by general dental practitioners. MATERIALS AND METHODS: This investigation was completed in two parts. (1) A pre-piloted pro-forma was distributed to a number of dental laboratories throughout the UK and Ireland. These sought information relating to the quality of written instructions for CCRPDs received by these laboratories, and details of the remunerative scheme under which they were being provided. Three categories of remunerative scheme were considered, private CCRPDs in Ireland, private CCRPDs in the UK, and CCRPDs being provided by salaried NHS practitioners. (2) A pre-piloted questionnaire was distributed to vocational dental practitioners in the UK and Ireland. This sought information relating to their attitudes, opinions, and educational and clinical experiences of CCRPD design and fabrication. RESULTS: (1) Three hundred completed pro-formas were returned from dental laboratories, 100 of which related to each of the three remunerative schemes. Poor or no written instructions were provided in 47% (n = 47) of CCRPD cases funded privately in the UK, 46% (n = 46) of CCRPD cases funded privately in Ireland, and 50% (n = 50) of CCRPDs being provided by salaried NHS practitioners. (2) One hundred and seven completed questionnaires were returned from vocational trainees. Vocational dental practitioners had completed fewer CCRPDs during VT than in dental school (dental school: median = 4, inter-quartile range = 3 to 5; VT: median = 2, inter-quartile range = 1 to 4). One-fifth of respondents (n = 22) had not completed any CCRPDs during VT. Nine per cent of VT practices (n = 10) had a surveyor on their premises. Only 15% (n = 16) of respondents felt the time they had spent in VT had increased their confidence in the design of CCRPDs. CONCLUSION: Financial factors did not have as significant an effect on the quality of prescription and fabrication of CCRPDs as did educational factors. Serious deficiencies in the teaching of CCRPDs during vocational training were identified.

The use of composite resin in removable prosthodontics.

Economic, esthetic, and concerns of tooth preservation are important when considering bonded composite resin for the partially edentulous patient's prosthetic rehabilitation. This article has described the clinical success of the use of bonded composite resin in removable prosthodontics. Composite resin may be used in daily clinical practice for the restoration of abutment teeth in contour, vertical support, and re-establishment of a patient's vertical dimension.

Frequency and costs of technical failures of clasp- and double crown-retained removable partial dentures.

OBJECTIVES: The aim of this study was to evaluate the frequency of technical failure rates and the maintenance costs of clasp- or double crown-retained removable partial dentures (RPDs) (parallel-sided and conical double crowns). MATERIAL AND METHODS: According to three different retainer systems used between January 1992 to December 1998, three subgroups were randomly assigned from a group of 181 patients consisting of forty cases each. The average observation time was 4.2+/-1.7 years, with a minimum of 1.0 years and a maximum of 6.9 years. Technical complications such as fractures of the artificial teeth, loss of cementation, loss of facings as well as fractures of the metal framework and the soldering were recorded due to the medical reports. RESULTS: Twenty percent of all clasp-retained dentures showed technical complications during the observation period, whereas 50% of conical crown-retained (CC) and 32.5% of the parallel-sided retained dentures (PS) required repair. Most often reported was loss of cementation for double crowns (n=13, 32.5% PS; n=8, 20% CC) and fractures of the clasps (n=5). Although clasp-retained dentures had a markedly lower frequency of failures (n=8) than double crown systems (n=31), the calculated repair costs per event during the observation time were more than twice as high for clasp-retained dentures (172.5 Euro) than for double crown systems (8-78 Euro). The hypothesis that the maintenance costs of the more sophisticated double crown system are higher must be rejected.

Prosthodontic profiles relating to economic status, social network, and social support in an elderly population living independently in Canada.

STATEMENT OF PROBLEM: Previous evaluations of life satisfaction and health have not completely explained the impact of social network, social support, and economics on the oral health-related behavior of elderly patients, particularly in relation to missing teeth. PURPOSE: This study measured the strength of associations between social network/support/class and the use of complete and removable partial dentures in elderly patients living independently. MATERIAL AND METHODS: A multiple stepwise logistic regression was used to contrast data from previous studies relating to the subject and to explore the influence of these social variables. RESULTS: The results substantiated the links observed in a previous study between some social features and oral fitness. More frequent use of complete dentures was identified among participants who reported higher incomes and among those who thought their incomes were sufficient for their needs. Unreplaced missing anterior teeth were associated more commonly with subjects less willing or able to leave their homes. CONCLUSIONS: Some salient features of prosthodontic care and oral health status were common to 2, comparable social environments. A minority within the elderly population may not see a need to make use of clinical dental services, regardless of how accessible these services are to them. Social network and social support issues may be important determinants in this perceived need to use clinical services.

A survey of the attitudes of members of the European Prosthodontic Association towards the shortened dental arch concept.

A survey of members of the European Prosthodontic Association was undertaken to assess their attitudes to the shortened dental arch concept, and to evaluate their experience with the approach. Data were collected using questionnaires. From an overall response of 42%, 96% of respondents agreed that the approach was acceptable in clinical practice. Almost all respondents had applied the shortened dental arch concept with 72% of respondents having treated less than 50 patients in this way over the previous 5 years. In terms of comfort and function, treatment outcome was satisfactory. However, 42% of respondents indicated that prosthetic extension of shortened dental arches was occasionally required.